Issue in CVC Creation

Hi Experts,
I am trying to create CVCs but not able to do it. when I check in the log it gives 3 erors
Characteristic value for characteristic XXXXXXX not filled
Value AAAAAA not contained in the master data table for XXXXXX
No new characteristics combinations were loaded
Please let me know what should I do to avoid this error, and how to create a CVC.
Thanks
Edited by: scmjrd on Jun 22, 2011 3:14 PM

Hi ,
this can be caused through a bug. Please check if note 1452746 is already implemented.
Additionally have you flagged 'Check SCM master data' ? In this case system tries to check the values in SCM master data of target planning object structure.
If you don't select 'check SCM master data' flag then there is no check on master data and system asks to maintain the values for characteristic XXXXXX in next screen manually.
Hope this information will helps you.
Regards,
Tibor

Similar Messages

Issue during automatic Creation of Work Order from Notification

Hi,
I have a issue during automatic Creation of Work Order from Notification.
BADI implemented: NOTIF_EVENT_POST
BAPI called in BADI: BAPI_ALM_ORDER_MAINTAIN
I am able to create Work Order successfully but after that i need to update notification header with created work order number.
But i am unable to update the same (VIQMEL-AUFNR).
Can anybody provide solution for the same!
Thanks,
Kumar.

Hi,
Any inputs on above posted issue!
Thanks in advance.
Thanks,
Kumar.

Automating Goods issue during Delivery creation

Hi all,
We have a requirement to automate the Goods issue creation for certain type of orders when the Delivery is getting created. The orders that need to be automatically Goods issued during delivery creation are identified based on certain plants. These plants are linked to certain output type and in the output type routine is the standard program RVADEK01 with one additonal code for automating the Goods Issue creation.
We have a custom table that holds the status of orders and there is a code in user exit userexit_save_document_prepare which changes the status of the order as closed when the goods issue is done.
But when the delivery is saved, in this case when an automatic goods issue needs to happen, when the flow reaches this user exit, the output type code dosenot get executed and the Goods issue is not done and so the custom table will not be updated with the closed status. So we are in need to findout a place where we can update the status of the order in that table.
The output type code is not executed even before the other user exit userexit_save_document. The output type code gets executed and goods issue is done after the this userexit_save_document when the COMMIT statement is executed in the subroutine BELEG_SICHEN_POST in the include FV50XF0B_BELEG_SICHERN.
I need help in finding out if any user exit or badi is called after this commit statement, so that I can add my code to close the status of the order in my custom table. Just after this commit the Goods issue happens and the VBFA table gets updated with the 'R' records for goods issue.
Please let me know if anyone has any idea on this. The ultimate goal is to find some place after the goods issue is done to update the status of the order as closed in the custom table we have.
Thanks,
Packia

Dear Siva,
As informed yesterday I changed the language from DE to EN, to match the other shipping points settings in table V_TVST, this did not bring the solution.
Please let me summarize, I am really desparate here:
This is only IM related, Not WM.
Picking lists are not printed for any Shipping Point from this warehouse, this is just a small subsidiary of my customer in Finland.
Issue is not Aut. PGI.
VP01SHP has not been configured for any shipping points, still there we do get the PR except for the new shipping point.
In the deliveries of correct processed shipping points I do not find any picking output type.
Item category in new shipping is equal to Item category in already existing shipping points, so no need to config here.
There is no picking block active.
PR creation happens once I enter the pick qty in the delivery in VL02N. This is the part that we need to have automated.
Can you please try to help me out?
Tnx & regards,
Chris

Issue in PO creation for Direct Material Procurement.

Hi Experts,
I am working with SRM 7.0 Classic Scenario.
I have no issues with SC creation for indirect materials with Account Assignment.
But when I select Order as Direct material in SC for any material with out account assignment on Approval of SC PO is created in SRM system as Extendended Classic Scenario even though I have not activated Extended classic scenario.
Kindly help me out in this issue how can I order as DIRECT MATERIAL WITH Classic scenario.
Regards,
B.N.Karthikeyan.

karthi
it is standard behavior,
but you can do one thing .
BBP_CREATE_BE_PO_NEW BADI - TRY . CLEAR THE ACCOUNT ASSIGNMENT .Thats all . check it up with technical resoucre.
but you have to decide by developemnt what are the materials are PO with account / without account assignment
br
muthu

Failure of CVC creation via /SAPAPO/TS_PLOB_MAINTAIN

Hello,
I want to generate CVC's via /SAPAPO/TS_PLOB_MAINTAIN and a variant.
In my selection condition in this program I choose one product. The button 'Number of Hits' shows a quantity of 4 CVC's.
After the execution of /SAPAPO/TS_PLOB_MAINTAIN I cannot find any CVC's on the Planning Object Structure with my specified product.
What can be the reason for this failure?
Thanks for answering and kind regards
Heinz Becker

Hi,
thanks for your reply.
The CVC creation run in background and finished successfully. There are no problems with numeric material code - I recognized the leading zeros.
I do not know /sapapo/mc62 and I did not find it in the system (program which start via se38; transaction).
Do you have any other explanations?
Kind regards
H.Becker

CVC creation - Strange issue with Master data table of 9AMATNR

Hi Experts,
We have encountered a strange issue with Master data table (/BI0/9APMATNR) of info object 9AMATNR.
We have a BADI implemented for checking the valid Characteristic before creation of the CVC using transaction /SAPAPO/MC62. This BADI puts a select on master data tab of material /BI0/9APMATNR and returns no value. But the material actually exists in the table (checked through SE16).
Now we go inside the info object 9AMATNR and go to the Master data Tab. There we go inside the master table
/BI0/9APMATNR and activate that. After activating the table it is read by the select statement inside BADI (Strange) and allows the CVC to be created.
Ideally it should not allow us to activate the SAP standard table /BI0/9APMATNR. I observed that in technical settings of this table it has single record buffering as switched on. (But as per my knowledge buffer gets refreshed every 2 to 4 mins and not in 2 days or something).
Your expert comment is valuable to us. Thanks.
Best Regards,
Chandan Dubey

Hi Chandan,
Try to use a WAIT statment with 5 seconds before your select statment.
I'm not sure whether this will work. Anyway check it and let me know the result.
Regards,
Siva.

SAP MM issue Relevant to Creation of PO from PR via ME57

Hi
For a PR with Qty 1, Generally On PO can be created. (Take assigned PR)
But while processing through ME57 ,it is creating two PO's.
How ?
with one screen ME57 started and kept some where partially in the process of creating PO.
In another screen ,again through same me57 or ME59n ,processing the same PR and PO is created.
Now from the first screen , SAP is allowing to create another PO
Totally two PO's
How to rectify this error.
After creating PO's if we try for another PO means ,it is giving error that qty exceeded.
For your information,in our system ,we kept the message as warning which wont allow to create another PO.
What is the solution for this Issue.
Is there any OSS notes for this?
Below is the discussion for the same.
You mean , you are on the partial way of trying to create PO through ME57 and your colleagues is started processing same PR through ME59N.
After PO created by him, it is allowing you to create another PO also without error message.
REgards
KG Subramanian
<< Personal information removed >>
JK: Yes, that is exactly what we did. I run open purreqs with ME57, started to make PO of one of them (=> takes me in to ME21N) but I didn't save PO yet. Meanwhile my collague runs ME59N and after it has saved PO for this purreq I was able to save PO for same purreq without any warnings.
Where as if you try after this process you could not able to process another PO against the same PR.?
JK: Yes. If I try to find this purreq with ME57 (or ME59n) it doesn't find it which is logical as PO(s) are already there.
Also confirm me from your experience that whether is it allowed double POu2019s when these transactions done separately ? (not simultaneously processing the PRu2019s)
JK: From my experience I would say it is possible to create PO for same purreq if same purreq has been included in the original result and this "Update worklist" is not pressed:
This I'm not 100% sure and have not tested it but I'd assume so. If this update is pressed, it removes purreqs which have been turned to POseven if it is done by some other user.
Simply I can say the issue is because simultaneous processing of PRu2019s which allows creation of Double POu2019s.
Hope my understanding about the issue is correct.
Edited by: Rob Burbank on Feb 12, 2009 12:32 PM

Hi
I have set the Messages as you mentioned in SPRO and checked to create PR to PO.Still it is allowing to create.
Creating this messages will activate in Po relevant program ?
Because i am getting another Message 06-249 while processing PO for already processed PR. This message is coming from Program .But the same is not there the place wherre you asked to maintian me 06-254 and 06-248 (in SPRO).
Can you some more information about this.

Issue with index creation of an infocube.

Hi,
I have an issue with creation of index's for a info cube in SAP BI. when i create index's using
a process chain for the cube it is getting failed in the process chain. when i try to check the index's for this
cube manual the following below massage is shown.
*The recalculation can take some time (depending on data volume)*
*The traffic light status is not up to date during this time*
Even i tried to repair the index's using the standard program "SAP_INFOCUBE_INDEXES_REPAIR" in SE38
to repair the index so it is leading to dump in this case.
Dear experts with the above issue please suggest.
Regards,
Prasad.

Hi,
Please check the Performance tab in the Cube manage and try doing a repair index from there.
This generates a job so check the job in SM37 and see if it finishes. If it fails, check the job log which will give you the exact error.
These indices are F fact table indices so if nothing works, try activating the cube by the pgm 'RSDG_CUBE_ACTIVATE' and see if that resolves the issue.
Let us know the results.

Issues in auto creation of tasks using templates/attributes in FS

Hi,
We have a requirement to auto-create one or more tasks when a SR is created in Field Service module. Additionally, task owner should be auto-populated during the task creation (task owner would a CRM group which is dependent on the task type as per company defined business rules). There can be one or more task types associated with a SR type. Tasks within a SR type can or cannot be dependent on one or more tasks within the same SR type e.g. I can have 3 task types A, B and C under a SR type and C is dependent on B, so we set up the dependency as needed.
We were thinking of following the task template group approach. We created the task templates per SR type and associated the template with the SR type. Issue here is - we cannot assign the task owner value to the task type (I couldn't see a placeholder to define the task owner). Does anyone have pointers on defining the task owner while creating task group templates?
Another issue is - whenever there is a dependency between tasks, we cannot define the parent task id value. When you navigate to the tasks screen and select the dependent task, you get the error "field must be entered" for parent task id. Any thoughts on defining dependencies with parent task id populated when the tasks are created?
Second approach we tried is creating SR/Task attribute mapping configuration. Here we can define the task owner as well but the issue is we cannot define the dependencies between the tasks. Also we are getting the error "Attribute CUG_TASK_DEP_ID doesnot exist for item JTFTASK" and tasks are not getting created.
Any pointers on resolving these issues would be greatly appreciated.
Thanks
Shreevatsa

Hi,
Today Auto Task creation can be based on the following:
Task Template Mapping => Based on SR Type, Product Category/Product, Problem Code mapping. For this mapping, Territories need to be setup to determine the Task Owner. If Territories are not setup, the application will not auto create Tasks.
Task Type Attribute Configuration => Based on SR Type <=> CIC Attributes mapping. In this mapping definition, the Task Owner field is required to be setup. Whenever Tasks are auto created, the Task Owner setup in the definition is used.
For Task Dependency - what is the requirement? For a SR Type if three Tasks A, B, and C need to be auto created - are you looking for functionality to first create only Task A and when Task A is closed to create only Task B and when Task B is closed to create Task C?
Thanks,
Denzil

Issue in BP creation in CRM 7 connected using XIF from CRM 4

Hi All,
We have connected CRM 7 and CRM 4 using XIF
We are facing an issue where 2 IDOCs (with same Basic type CRMXIF_PARTNER_SAVE_M01) are generated at same time while using XIF adapter dring busines partner creation. First IDOC is succesful and other fails with error message " Business patner locked by you".
Can you please share some expertise on this.
Thanks & regards,
Mohit SIngh

Hi Bala,
Which version of CRM are you using? There are some notes for CUST_HIERARCHY BDoc errors. Please have a look at them in the Support Portal.
CRM_BUPA_MAIN_VAL is used for validation of rules set in CRM Server and maybe you dont have the same mandatory rules in MSA.
Best Regards,
Ankan

Issue in domain creation local deployment Error : odi-core.jar

Hi,
I am trying to create a domain on my VM for local deployment of fincomm and Ess. But during domain creation it is failing with following errors.
Error in writing to file '/scratch/software/mw_local/FMWTOOLS_11.1.1.7.0_GENERIC_130327.1838_PATCHES4FA_11.1.1.7.0_PLATFORMS/vimjain/mw_home_standalone/odi/oracledi.sdk/lib/odi-core.jar'. [invalid block type]
Cancelling Install Session..
Internal Error: File Copy failed. Aborting Install
I tried the various different options for creation but all failed.
1> I tried by resetting to old patchset.
2> 3 days back i was able to successfully create the domain, but today i am seeing the error as discussed.
3>Tried to delete the patchset and recreate a new one, but still no luck
If anyone else is also seeing the same issue and able to resolve.
Thanks
Vimal

You may want to use Oracle Internal forums and blogs for solution.
Since these are public forums, you should not post content contains sensitive information here. Please remove the dir structure (which also includes your uid).

Exchange rate issue during PO creation

Dear Friends
I am getting the below error whenever I am trying to create an Import PO
Enter rate USD / INR rate type for 28.10.2010 in the system settings
Message no. SG105
I have entered the rates in OB08 table- for direct & Indiret exchange rates for M
I also have cheched the OBBS and made entries for the date 28.10.2010
But still I am getting the error
How do I proceed
Samuel
Edited by: samuel mendis on Oct 28, 2010 1:07 PM

Guys
We have solved this issue. Even though we were getting the SG105 error, the real problem was some where else.
We have never used CIN in our our organisation as it is not applicable. The problem we did is to use the Import pricing procedure for our use which was copied from IN: Purchasing for Imported materials.
Whenever we tried to create a Import PO it was validating the CVD entries which we make in the company code settings for Tax on Goods Movements. Once I maintained a dummy G/L account the error was gone.
The problem is why it validated CVD during PO creation we never understood. Since in my opinion CVD capturing is done during Invoicing verification stage and not during PO stage. Either way we have already updated these details to the SAP Support bench.
Thanks
Samuel

No Pre-commitment at PR creation time in ECC -issue at PO creation in SRM

Hi all,
We are on SRM 5.0 Extendec CLassic with ECC 6.0
I have a couple of questions wrt budget check and commitment creation in SRM.
1.When a PRis transferred from ECC to SRM,is the budget check possible?If yes,what are the settings in ECC/SRM?
2. After a PR is transferred to SRM,SC gets created.When creating a SC,is the budget check done?If so,if the funds are available,is acommitment posted to ECC?
3.IF the Budget check error was not encountered at the time of SC creation,while creating a PO,why does the system gives error that "Funds not available".Is this correct?
We have somePR's(inventory) which get transferred to SRM,but after the SC is created and aPO is issued for that SC,systemchecks the budget and throws an error that funds not available.
What we want is that at the time ofPR creation itself,system should check the funds and disallow PRcreation if funda are not available.
Can anyone tell me whether we need to implement the controlin ECC at the of PR creation or is this issue because of no commitment happening at SC level?
Please clarify.

Hi Muthu/Virendra and other xperts,
Any suggestions?

How to resolve the issue in token creation in oracle mobile and social?

Hi
I am facing an issue in client token creation.To check where exactly the problem is, I tried logging the same and I found that till the line just before the tokencreation is logged. It breaks at the line where token is to be created.
AuthenticationResult savedClientToken= tc.createToken(tcrd, headers);
Can I have a solution for this?
Thank you
     Devika

It is better to close statement using try...catch...finally , e.g.
PreparedStatement objStmt = null;
try
     objStmt = conn.prepareStatement(...);
     // ... do anything
catch (Exception e)
     // ... exception handling
finally
     // another try...catch block to handle exception during statement close
     try {   objStmt.close();   }     catch (Exception e) {   }
     objStmt = null;
This would guarantee that statment object is being closed even though exception is thrown. (Don't wait for connection release by garbage collector)

CVC creation

hello SAP ppl
1) Whats the another way to create CVC other then SAP easy acess like MC62 or DP- MD-Maintain Charcaterctic Com.
another way means creation of some 1000 CVC's.
2) By infocube we load data to PA whats the another way i mean from where we get also data to PA.
3) we transfer demand forecast to R/3 and to which infostructure of R/3 we transfer our DP Data.
4) We transer data to R/3 by Plng job like creating Transfer Prfile and so on ,what could be the job name we give in realtime .
please find time for answering my queries.
Thankin u in advance
ronald

1) Whats the another way to create CVC other then SAP easy acess like MC62 or DP- MD-Maintain Charcaterctic Com.
another way means creation of some 1000 CVC's.
This is already answered by Virendra.
Have you checked the Load from Worklist option in /SAPAPO/MC62.
It allows loading data from multiple sources like a file, BW Infoprovider i.e. infocube etc.
2) By infocube we load data to PA whats the another way i mean from where we get also data to PA.
Users enter data to a planning area interactively always. You can also use BAPIs and use them in programs to write data to a planning area. Don't ask for such program code.
3) we transfer demand forecast to R/3 and to which infostructure of R/3 we transfer our DP Data.
Depends on R/3 infostructure design which will contain
4) We transer data to R/3 by Plng job like creating Transfer Prfile and so on ,what could be the job name we give in realtime
You can decide on the naming convention. There is no hard and fast rule
somnath

Issue in CVC Creation

Similar Messages

Maybe you are looking for