Issue in data migration of PO contract (Updating table A215)

Hi All,
I doing data migration for PO contract throught BDC, I wanted to update the table A215,
I can't see the field of A215 on PO contract transaction screen (i.e. Transaction ME33K ).
Can anybody tell me how to load the data in A215 thorugh BDC.
Regards,
Sagar

How is this A215 table maintained manually? Thru ME33K or a different transaction like MEK1?
you are saying you do BDC, are yoou using a SAP given report or did you record the maintenance transaction yourself in SHDB?

Similar Messages

Data migration of account contract through EMIGALL

hi experts,
i am facing some problem, when i migrate the data of contract account through emigall,problem are-
1) enter the value in account determination id although i have given value in field koiz_sd.
2) Account holder relationship is not uniquely defined
pls reply ASAP
thanx
Pradeep Sharma
Edited by: Pradeep sharma on May 1, 2008 8:09 AM

Hi
1. You need to make sure the fields are entered in the right order in the migration file. If you didn't do it yet, try to generate a test file first using EMIGALL.
2. Make sure you have one account holder for that contract account. You cannot have more than one account holders or not a single one.
Hope this helps. If not, please be more specific.
Bogdan

CP issues during data migration through IDOC

HI,
We are migrating data from One server to another thru PFAL, but the CP data is not posted as it gives the error
Relationship starting from 01P 00093159 impossible - 01CP50002607 does not exist/is not active
is there a way to migrate the CP data ?

Hi
Check the BD64 configuration if the relationship is filtered out in the Message type.
Try sending the CP object first to the other server and then resend the person again. The error is because the The object is not existing the Target system.
Hope this helps, if so reward.
Thanks
Shyam

Data Migration of Contracts with periodic billing and revenue recognition

Hello Experts,
I am trying to develop a legacy data migration plan for Contracts with periodic billing plan and revenue recognition.
Example of the scenario is given below:
Customer signed a contract for one year starting 01/01/2009.
Customer is billed quartely, billed in advance.
SAP going live on 04/01/2009
Customer is billed for 3 months and also for initial set up fees.
Revenue recognition is done monthly.
We have to migrate this contract to SAP.
Billing document posting may be necessay as it affects revenue recognition which spans across the total contract period.
Any ideas how to do this?
Thanks A Lot
Anil
Edited by: Anil Jose on Sep 17, 2008 9:38 PM

Hi Anil
How did you manage this? We also had the same problem in one of our contracts and what we did was that we copied the contracts from the legacy with the full value. That is suppose SAP went live on 1st April, 2009 and the contract was created on 1st January 2009 for a value of suppose 100 USD, with the first billing being done on 1st Jan for 33.33 USD for 4 months. We first created the contract with a validity from 1st Jan 2009 in the new system. We billed it with a billing type that we created that did not actually create new accounting entries as the accounting entries had already been created in the legacy system. In the new system then we recognised the revenue till the go live, so that the actual value remaining of the contract reduced. Then we started the billing plan of the contract from 1st of April 2009 for the remaining amount. So next invoice was created on 1st april for 33.33 USD. Can you share your solution.
Regards
Indranill

Issue in data replication for one particular table

Hi,
We have implemented streams in out test environment and testing the business functionalities. We have an issue in data replication for only one custom table all other tables data replications are proper no issue. When we do 100 rows update data replication is not happening for that particular table.
Issue to simulate
Update one row -- Replication successful.
100 rows update -- After 3-4 hrs nothing happened.
Please let me know did any of you have come across similar issue.
Thanks,
Anand

Extreme slowness on apply site are usually due to lock, library cache locks or too big segments in streams technical tables left after a failure during heavy insert. these tables are scanned with full table scan and scanning hundreds of time empty millions of empty blocks result in a very big loss of performance, but not in the extend your are describing. In your case it sound more like a form of lock.
We need more info on this table : Lob segments? tablespace in ASSM?
If the table is partitioned and do you have a job that perform drop partitions? most interesting is what are the system waits nd above all the apply server sessions waits. given the time frame, I would more looks after a lock or an library cache lock due to a drop partitions or concurrent updates. When you are performing the update, you may query 'DBA_DDL_LOCKS', 'DBA_KGLLOCK' and 'DBA_LOCK_INTERNAL' to check that you are not taken in a library cache lock.

New GL Data Migration

Dear All
We are going to migrate from classical general ledger to new general ledger with scenario 3. We have done all the necessary configuration related to new general ledger and also completed the testing. In this regard I would request if any one has experience of data migration from classical to new general eldger.
Thanks and Best Regards
Farhan Qaiser

Dear Mark,
We had faced the same issue & our communication with OSS brought the following points to the fore:-
a) The decision to activate doc-splitting MUST be made before go-live.
b) The migration tool required for data migration into doc-split related tables is planned by SAP but not yet available.
c)Subsequent activation of doc-split causes serious problems as per note 891144.
Regards,
Debojit Dey

Data Migration Update

Hi Experts
I have initial data migrated my customers into the system, I now want to perform an update to those customer I have already loaded. As I'm imported the changes ByDesign creates an error saying that the record already exists.
Is there away to perform an update.
Thank you in advance
Antonio

Hello Antonio,
As of release 1402 the Modify Already Existing Records mode of migration has been removed as this mode has been replaced with a functionality in the Mass Data Maintenance work center. For example you are trying to modify the Materials.
The requirement can be fulfilled through Mass Data Maintenance work center and the steps are as follows:
Go to Mass Data Maintenance work center.
Select Link for Export Materials.
Add the required Materials and select OK.
Go to General tab.
Select <export> for the columns which needs change.
Select Export Data to CSV File button.
In the Excel file, change/add the values for those fields and save the changes, and close the file.
Close the Export Materials screen.
Upload the file and Execute Data Import.
Proceed with data validation and import.
Hope this solves the issue.
BR,
--Swaroop

Data Migration from iMac to MacBook Pro Issues

Hello!
I purchased a MacBook Pro and immediately began the data transfer through the Migration Assistant. Twelve hours later, it is at a screen saying "canceling migration", which it has been stuck on for five hours. I shut down my MacBook Pro and the iMac, and attempted to start the process over again. It appears that the data in fact did transfer, so I skipped the step asking me to transfer my data. Now I am at the screen to create my account, and it will not let me choose my full name or account name (due to that account information already being transfered over). That is the only account I would like to use, not any new account. I am unsure how to get around this step, any advice?
Thanks!

I just bought a MacBook Pro and am trying to use MA to migrate stuff from my iMac (Intel, OSX 10.4.11) to my MacBook Pro (Intel, OSX 10.6.3).
Problem is, every time I try ("from" iMac "to" MacBook Pro), my iMac IDs my MacBook Pro and asks for the passcode, I give it, it then asks for the passcode again, I give it again, then it churns away with the message that it's "looking for other computers". On and on and on and gets stuck in this mode.
I'm using ethernet between the two. Tried wireless also. Same issue. Downloaded the Migration & DVD/CD Sharing Update onto the iMac; it's already on the MacBook Pro. Same problem persists.
Any suggestions? (among the ten zillion firewire cables I have, none fits the MacBook Pro, so haven't tried firewire yet).
Thanks.

My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?

My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?
if yes then how can i save my data or get out of recovery mode.. Is there any safe mode or something like that on which i could access my data..
P.S. I have not taken any backup of my iPhone on itunes..
Please help me sort out this issue..

Recovery mode doesn't mean that all your data is already lost. You only lose your data if you restore it.
When you plug the phone is into iTunes hold down the home button. iTunes may then give you the option JUST to update the software first. This should not get rid of any data.
However, if iTunes is only giving you the option to RESTORE and update, then you will lose your data I'm afraid.
Hope that helps!

Data Migration Opening Balances are not updating in the Report F.08

Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
Kishore

Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore

SAP, Data Migration Contracts

Good afternoon, I am seeking additional SAP resources with Data Nigration, MTO and ICWC experience. Please could someone advise a reliable source to find the available skills in the current contracting marketplace.

Then my apologies and welcome as a "newbie" to our community. Much information is to be gleaned concerning Data Migration in the website area called: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/xi">XI</a>
Also, note that community supports community and members ask questions and "reward" one another for good content.
Generally we try to search or check the site as community members to see if our post has an existing answer.
I was in the middle of this post, when Mark jumped to answer.
Again, welcome and keep posting.
Marilyn

Data migration issues

Hi SAP Guru
1. While we are doing data migration, how we will upload partially closed invoices.
2. In F110 - Automatic Payment Program, while setting parameters we need to put u201CPosting date for next payment run". Please explain what the significance of putting that is. Why is that required to be put?
Regards
Srini

Hi,
1.Create open item for the remaining amount and bring the item into SAP...
2.By puttingPosting date for next payment rundate, system considers all the invoice with grace periods and due dates in the current payment run..
For eg: u have u r next payment run date as 01.09.2009... u r running current program on 28.09.2009.. One invoice fall due say on 28.09.2009 but u have say 7 more days as graceperiod in u r payment term.. now system can pick this invoice on next payrun than in the current payrun...
Regards
Sudhakar Reddy

"Your meeting was found to be out of date and has been automatically updated."

Hello, one of our users is stating that when they make changes to meeting dates and/or times, a few minutes to a day later, the changes revert to the original date and/or time. Additionally, they will occasional also receive an email stating "Your meeting
was found to be out of date and has been automatically updated."
This customer is on a Win7 client and running Outlook 2007. Both the OS and Office/Outlook are completely patched as of 08/12/2014. There are also a couple of iOS devices that access the Exchange account and both are running the latest version of iOS according
to the customer.
The customer states that this behavior began immediately following our migration from Exchange 2007 to 2013 a couple of months back. I am not able to see any reason for this at the server level. We also do not currently have any other users complaining of
the same issue. I am unable to replicate the issue using my account. I suspect that it is isolated to this single user at this point.
We are running Exchange v15, build 847.32.
Has anyone experienced the same? Thanks in advance for any input.

Hi,
I noticed that there are some third-party devices used to sync and manage Exchange calendar. Usually, some issues may be caused by some devices used for Exchange ActiveSync service. We can try to disable the devices and check whether the issue persists.
Here is a KB descripted Current issues with Microsoft Exchange ActiveSync and third-party devices:
http://support.microsoft.com/kb/2563324
If the issue is not caused by any third-party programs, please check the time zone from Outlook client, local machine, third-party devices and Outlook Web App. Please also change a computer then send test meeting updates to check if the issue continues.
Regards,
Winnie Liang
TechNet Community Support

SAP Data Migration from R/3 4.6C to ECC 6.0

Hey All
We are planning to upgrade SAP R/3 4.6C to ECC 6 in near future. I am aware that data migration is not an issue as upgrade takes care of it all. What we are concerned with is that if after a few days of upgrade when the system is functional and users have performed some quantum of transactions on it, in case if the system fails then and we have to revert back to R/3 4.6C how can we get back all the information that we processed on ECC back to R/3.
I would like to know if anyone who has performed an upgrade, had some kind of fail over strategy for such a situation. Is there some tool we can use for this purpose?
Regards
Bilal Nazir

> What we are concerned with is that if after a few days of upgrade when the system is functional and users have performed some quantum of transactions on it, in case if the system fails then and we have to revert back to R/3 4.6C how can we get back all the information that we processed on ECC back to R/3.
Simple answer: not possible.
> I would like to know if anyone who has performed an upgrade, had some kind of fail over strategy for such a situation. Is there some tool we can use for this purpose?
No - there is no tool.
Table structures change, update programs changed - it's not possible to "roll back" that to a date and re-do it on 4.6c again.
Do minimize the risk I would copy the production system to a sandbox, do the upgrade and let the (key-) users test their functionality intensively.
Markus

IPad1 to iPad2 data migration questions

Hi,
Before data migration from iPad1 to iPad2 (backup and restore/ sync), I assume that we need to have the updated iTunes software (on Mac/ Windows). Is it necessary for iPad1 to have updated version of firmware before data migration to iPad2? Is it okay if iPad1 firmware be the same or older version of the iPad 2's firmware?
Is it possible to have 2 iPads backup on iTunes?
Is there any specific suggestion for data migration if we are going to migrate huge amount of data (>15 GB mainly business applications, library files) from iPad1 to iPad2? Any possible issues which I can eliminate/ reduce beforehand by custom setting in iTunes?
Thanks for your help.

I'll try to shed light on this:
1) I think it's best to activate the new iPad as a new device, but you'll get people that disagree. I say start your iPad 2 fresh as a daisy. The version of iOS will not matter in this case.
2) Absolutely. Just give the new one a different name, so there is no confusion. itunes will keep track.
Like iPad 1 = dotexe.....iPad 2 = dotexe2. Or similar.
3) No, not in itunes. Just make sure the data is all selected in itunes as to source, etc. And the apps are all selected, before you sync.
Hope this helps...

Issue in data migration of PO contract (Updating table A215)

Similar Messages

Maybe you are looking for