Issue in display of Overall Result while implememting RRI

Hi All,
I have a base report which gives all the material for which no issues are done in last 3 yrs for a plant.
I have a new report which has all the materials passed from the base report and then i display the consumption of those in rest of the plants.
When I display the report, the Overall Result is displayed incorrect.
Child report
                   Selected Plant Stock  Selected Plant Stk value    Consumption in 12Mnt_rest of the Plants
Material   Plant    Overall Result             Overall Result                        P1   P2
10001                      1.00                            395.00 EUR                    2.00  1.00          
10002                      1.00                                1.00 EUR                    2.00  5.00
10003                      3.00                              74.25 EUR                     2.00    6.00
Overall Result            35.00                          12600.25 EUR                    6.00    13.00
When Analysed We found that the overall result is the result of the base report. for the 1st and 2 column.How Do I change the reuslt.
Appreciate help in advance.
Harika.

Hi Harika,
In the Report assignments ,make the PLant and result as "Delete" mode for these infoobjects.
Just come back with ur assignment settings,it has got to do with these Settings !!!!!!!!!!
Rgds
SVU123

Similar Messages

  • Display of OVERALL RESULT value in any particult CELL in Workbook???

    Hi,
    is it possible to display the OVERALL RESULT value of a report in a particular cell in the workbook?
    Here is the scenario: When i run a workbook, say the overall result is $1000. i want to display this value in cell D7 of the workbook.
    is this possible using macros????
    Thanks
    Krishna

    Thanks Mayanak.
    I am running the workbook in this case and i dont see any "convert to formula" option when i right click. Is this a option in 7.0 or 3.5. we are in 3.5.
    Krishna

  • Do not display the overall result for one KF

    Hi,
    Question is in the title, here is an explanation of what I want to get with a simple BEx query (without adding extra vba)
    2 KF : KF1 and KF2
    2 Caracteristics : let's say 0PLANT and 0CALMONTH
    0CALMONTH is displayed in line, 0PLANT in column
                         overall result    1701    1709    1710
    0calmonth        KF1               KF2      KF2     KF2
    01.2009           xxx               xxx       xxx     xxx               
    02.2009           xxx               xxx       xxx     xxx
    03.2009           xxx               xxx       xxx     xxx
    Basically what I want is to KF1 only for the aggregation of all plants and I want to display KF2 for each plant
    Do you think this is possible ?
    For now I only succeed in getting 
                         overall result    1701    1709    1710
    0calmonth        KF1  KF2      KF2      KF2     KF2
    01.2009           xxx               xxx       xxx     xxx               
    02.2009           xxx               xxx       xxx     xxx
    03.2009           xxx               xxx       xxx     xxx
    I checked the forum for a while and did not find the answer (zero suppress do not work on result)
    Thanks for you help,
    rgds,
    Sebastien

    Hi,
    I didnt get exactly for what you are looking for ,
    Chars : 0Plant, 0Calmonth....put these two in two new selections by creating a new structure in Rows
    KF:        what ever the KFs you need put them in Columns in a structure,
    then enable the Cell Reference, now you can hide the KF results by cell wise and/or column wise however you need,
    Regards
    ReddY A

  • URGENT : display only overall result

    hi........my query to track the performance of dealer.
    in the selection i've added customer creation date (user entry), customer group as Dealer, branch (user entry), division (user entry) & fiscal year varient.
    the structure is:
    in the row : bill-to-party
    in the column :  last year sale |         this year sale |          last to last year sale |
    if i run this qurery in the same workbook for different creation date then i just want to see the overall result for each date range.                   
    how can i do this? pls help........

    Hi Priya,
    Just remove Bill to party from Drill down, i mean no characterstics in drill down (along rows in your case) from all the sheets of workbook.
    Only keep your 3 Key Figures along the cloumns.
    It will just show you Overall Result. As you want overall result i dont think you need report displayed by Bill-to
    Thanks
            Chitrarth Kastwar

  • How to display the Overall result value at the top of work book

    Hi,
      How can i display the value of  Overall result(Sum of the Total) column at the top of the work book in Text field.
    Thanks
    Sreadhar

    Go to Query Global properties in Query designer and you can find a setting to show result rows on top. This setting will show overall result as first row in the report. But I don't think you can show it in Text field in WB.

  • Query overall Result while using structures

    Hi all,
    I have 2 structures in my query, in both <b>rows and columns</b>. Now I want to display the total result for all the columns in my structure. How do I go about that?
    I cant use cell definition as I used the cell definition on a couple of cells to calculate and all other columns have been derived normally thru selections and formulas.
    Any insight or pointers would be appreciated and rewarded.
    Cheers,
    Sri

    Thanks folks - I figured it out.

  • OIM 11g R2 Beta: Display default search results while displaying Catalog

    All,
    We are trying to achieve displaying a default search results automatically (based on any criteria) while displaying the Catalog screen. By OOTB feature, the Catalog search is empty and there won't be any results displayed while displaying the Catalog screen. Please provide any directions or inputs for achieving this functionality if anyone is aware of how to achieve this functionality.
    Thanks in advance.
    Regards
    Kishore.

    In Search box enter any search item and click "Add to Cart" and then click "Checkout". Now in the same catalog screen at the right side of list of Cart Items you can see button as "Save As Profile". Give any name to this Profile and save the profile. Now if you click Catalog again, you can see the created profile under catalog search.

  • Query with a condition - Overall results row displays incorrect value

    Hi All,
    I have a bw query with top 40 conditions. However, The Overall Result Row Figures Do Not Equal The Sum of the Column Rows.
    Although the top condition is activated, the overall result still displays the overall result of the whole report.
    I have 3 columns in the report
    Selected Period
    Prior Period and
    Variance
    The formula for variance is (Selected Period/Prior Period)-1.
    Does anyone have an idea to fix this?
    Thank you so much in advance.
    Have a great day!

    Hi Gaurav,
    Thank you so much for your reply, however this does not solve fully the issue.
    Changing the properties to "Summation" will indeed provide me with the correct sum for the "selected period" and "Prior Period." However what I need in the Overall Result Row for the "Variance" column is not the total but instead the value when the total of Selected Period is divided by Prior Period then minus 1.
    Overall Variance = (Overall Selected Period/Overall Prior Period)-1
    Do you know a way to make this possible.
    Thank you so much.

  • Supress Subtotal rows and display overall result of keyfigure

    Hello there,
    Is there a procedure to hide result of a keyfigure at subtotal level and display result at overall result level?
    Please let me know.
    Points assured.
    regards
    Joga

    Hi Daya,
    Thanks for the reply. in the report i have other keyfigures also for which i need to show subtotals.
    its only for 3 keyfigures i need to hide the subtotal result and show overall result.
    when iam hiding the result rows of the key figure iam not getting the result in the overall result column as well.
    i only want a result for overall result while supressing the subtotals for 3 keyfigures out of 10 keyfigures.
    regards
    Joga

  • OverAll result display in a query

    Hi,
       Hirerachy is Region(Level1)>Area(Level2)>Store(Level3).
    I draged these 3 char into the rows on the query designer and selected display as Hirerachy and selected 'Expand upto' to region.
      When i ran the report it is displaying as
      Overall Result
      Region v  -
    Blank
      If it click the down arrow beside the region then it is displaying the values for area.
    How can i get the values in the region field
    Thanks

    HI IBM
    can u be more clear on this.for which IO u selected display as hirerachy and one more thing does  region is ur top node in that hirerachy?.
    what i undestood is ur getting values for area and store when u drill down on ur top node(region) right.ur not getting the roll up value for region.
    can u be clear,

  • Problem in positioning of the Overall Result Row when using a hierarchy

    Hello All,
    i've built a query on a hierarchy and i want the 'Overall Result' to be displayed at the bottom.
    I've made the following setting in the Query Designer
    <b>Query Properties -> Display -> Results Position -> Bottom/Right</b>
    but still, the 'Overall Result' is displayed at the top of the result rows.
    Could some one please tell me if this is how the functionality is expected to work when a hierarchy is used for display ?
    We are on BW3.1 SP 9
    Best Regards,
    Sanjay<b></b>

    Hi Roberto,
    could you please let me know if the following analysis of mine is correct.
    The Overall Result will be dispalyed at the top if the 'Position of Lower-Level Nodes' is set to 'Down'(default setting) in the Hierarchy Properties of
    the characteristic. If the 'Overall Result' is required to be at the bottom then 'Position of Lower-Level Nodes' has to be set to 'Up'. It is not possible to display the Overall Result at the bottom with the 'Position of Lower-Level Nodes' set to 'Down'
    Will greatly appreciate your help !
    Best Regards,
    Sanjay

  • Chart item - overall result

    Hello,
    I'm working with the BEx Web Application Designer BI AddOn /.X (based on 6.40) and I want to display the result of query in a chart item. The problem hereby is that i also want to display the overall result! How can I do this?
    Thanks,
    Margit

    You want to display both on the same chart item ?
    In this case, you've to define the query with display of the overall result, and change the properties of the chart item, to say that you display the results. Don't know if it's flagged on or off by default. No need of 2 DP. I thought you wanted to display a chart with details on one side, and an overall result on the other side.

  • I can see the result column but not overall result in the query

    Hi all,
    How to display the overall result in the query, I am able to see the result value in the query and not the overall result!!
    Thanks

    Hi Pooja,
    I hope you have to check the Display property of the attribute.It should be always display.
    Regards,
    Vasanthan V

  • Issue in displaying Overall Result of a formula variable

    Hi All,
    I have a fields as Years of Sevice in my report. This is defined as char. I am bringing this in the report by creating a calculated key figure and then using a formula variable that is defined as the replacement path of the Years of SErvice.
    Now when i execute the report , I dont see the Overall Result. I checked the porperties as Summation.
    The overall result is displayed as X for all the columna
    Report has
    Rows - Leaving Reason - defined as Char
    Columns - Years of Service  >3
                    Years of Service 3-6
                    Years of Service 6-10
    Can someone shed some light where i am going wrong?
    Regards,
    Harika.

    You have said years of service is declared as a characteristic. Is it brought into the report as an formula variable through Calculated key figure ???

  • How to display Average, not Sum, in the "Overall Result" row of a report?

    Every report I look at or execute that has an Overall Result row always shows a total(sum) of all the cells in the column.  I recently came across one that shows the average of all the cells in the column and after looking at the query in BEx Query Designer 7.0 and BEx Analyzer 7.0 I cannot seem to find out where to set this.  All of the Key Figures are listed as "Nothing Defined" in the Calculations tab which is exactly what they should be, but where can I set that yellow-highlighted Overall Result row to calculate an average, not a sum?
    Example can be found in this picture:
    http://img87.imageshack.us/img87/6757/pic1yp.jpg
    Thanks for the help!

    My issue was that I was setting my KF's to 'Calculate Result As: Average' within the Query View that I was editing but the change was not showing on my screen when I have that View opened within the Analyzer.  Infact, it still is showing totals.  But when I execute my Web Template that references this Query View, the graph does display the result row using Averages.  Seems to just be a visibility bug, but it is now working.
    Thanks for the reminder about that property KP,
    Scott

Maybe you are looking for

  • Time Machine does not see my external HD

    I would like to setup TM but it does not see my external HD, but I can see it on desktop in and finder. I can browse it. But time machine does not see it and forces me to use airport time capsule but I don't have it. Help please.

  • Get Contents of TextEdit Document Only Copies Filename to Clipboard

    I'm using the following workflow but instead of the TextEdit contents getting copied to the clipboard, the filename gets copied instead. So the output looks like: /Users/username/Desktop/tns1.txt Is there a way to copy the contents to the clipboard?

  • {@link Object#clone()} , -link does not work!!

    I have a problem with this!! Somehow the -link option does not work very well. I have ensured that I did correctly set my command option -link to -link http://java.sun.com/j2se/1.4.1/docs/api I have already imported java.lang.Object at the top of my

  • How can I uninstall a previously installed version of Aperature from another owner?

    Hi, I purcased my iMac from a previous owner.  His version of Aperature is still on it - registered under his AppleID.  I would like to uninstall it as it is preventing me from using my own version of iPhoto.  How can I do this?  Would it be asvisabl

  • How to enlarge pictures and change reading view

    I've bought an ebook which should contain large Excel screenshots and text. According to the description it should be in 2 columns, one for text and one for screenshots. I can see the text and enlarge it, but the screenshot pictures are very small an