Issue in Exploding Alternate BOM while creating Planned Order to PR

Hiii All,,
I have maintained a two BOM's for a finished material one for In House production and one for Sub contracting the components for the Two BOM's are different.
i have maintained Two Versions for the finished material also.
when i covnvert a planned Order to an Sub Contracting Purchase Requisition alternate BOM doesnt explode. i have also maintained a production version in the Purchase info record. Still the main BOM explodes.
i have to manually change the planned order and give the other production version ie not the Inhouse BOM.
After creating the PR then again i have to go planned order and change to the normal InHouse BOM.
Please Provide me the solution.
Thanx & Regards,
Kumar Rayudu

Hi
In order to explode your alt BOM in your PR do the following.
1. Maintian alt BOM
2.Maintain a Version using this alt BOM only. Do not select any routing /rcp group.
3.Give this Version name in your Inforecord (ME11).
4.Set the "MRP" field as "Record Relevant to MRP " in your Source List for the material.
5.In the material master, select the procurement type (MRP2) as " X " ( ie, both proc types).
I am sure it will work for you
Regards
Krishna

Similar Messages

Error while creating planned order in product view

I am getting following error when I try to create planned order for a product in a Location manually in product view using /SAPAPO/RRP5.
Error occurred while creating order
Message no. /SAPAPO/RRP251
I checked the product and resource. Everything looks good.
Block is available in the resource WMP1_2041_001 for characteristics specified in planned order.
Product master and PDS look good.
In the planning log, I see the following error message.
Plan explosion failed for product LBRA1050-661 in location 2041
Message no. /SAPAPO/RRP718
I have not found SAP notes for above error.
Can you pl let me know what this is due to?
Thanks,
Srini

Srini,
The message was created as a result of several notes, such as 1582997. There are others.
The implication is that you have an invalid source somewhere in your BOM. Maybe a bad component part, maybe a bad transportation lane, maybe an invalid BOM, or maybe a bad PPM/PDS.
If you can't find the problem using logical troubleshooting steps, have one of your programmers debug. Have him put breakpoints in FM /SAPAPO/RRP_PLORD_CREATE . If you are particularly lucky, you will find a developer that understands German, because all the internal comments in this FM are in German.
Best regards,
DB49

Error while creating Planned order in SAP PP

Hi ,
I am creating planned order for finished material and system has given below error - Please specify the order deadlines in ascending order.
SAP Message Error- Message no. 61009 Please specify the order deadlines in ascending order
Very first planned order get saved and we declare the production and business completed
Now creating second planned order , while saving system giving above error.
I am Taking Planned Order Profile LA -Stock order
Any solution ...?
Thanks in advance !!!
Deepak.

Hello Deepak,
Please adjust the order dates in the scheduling of the planned order. In normal production scenario operation completed end of the night shift and order finish date is possibly moved one day in the future for this reason we need to set the operation timing in 24:00:00 format
In your issue change date like this
End date : 30.06.2014
Start : 31.05.2014
Opening date : 31.05.2104
Check with this date, it’s work for you
Regards
Umesh Mali

How to hide componant row of BOM while creating sales order OR AR Invoice

Dear expert
my client wants to create Sales order with Sales BOM, but they do not want to see componant product while create sales order or AR invoice they want to see only parent items.
Please help me asap

Hi,
check below link
Avoid printing child items of Sales BOM in AR Invoice
Regards
Deepak Tyagi

DBIF_RSQL_SQL_ERROR while creating planned order in ECC

Hi ,
Recently we have done the ECC6.0 migration. Migration in the sense
Server A ECC6.0 Maxdb to Server B ECC6.0 Sqlserver.
we took the database export from server A and imported to Server B.
After completing the migration we are facing a problem.
Using Trx code MD11 I am creating Planned order. It is giving Planned order XXXXX will be created.But when I go MD13 and try to retrive the same planned order it says the order XXXXX doesn't exists.
when I try to go back from MD13 it shows Express document "update was terminated" received from Author ************.
I am seeing a dump in ST22.
Error 22.04.2010 DBIF_RSQL_SQL_ERROR CX_SY_OPEN_SQL_DB
Cann't insert NULL into column "ADCODE" Table "RESB"
Column doesn't allow NULLS . Insert Fails.
Any Help is Appreciated.
Regards,
Guru.

Hi Srini,
Please kindly review and evaluate note 686357 for possible solution.
686357 able pool nametab length incorrect after Unicode
The following pools may be affected: ATAB, GLSP, GLTP, DVPOOLTEXT, KAPOL
Please kindly run report RATPONTC to reset the dictionary and nametab length in the note.
Regards,
Mauro

Alternate BOM explosion in planned order creation

Dear Experts,
We have maintained a alternate BOM 1 and 2 of a assembly which is defined as a Phantom (E-50). User wants a option of selecting the alternate BOM of this phantom assembly while creating the planned order of Header assembly. Is it possible?How?
Thanking you,
SR

Dear Sachin,
In my understanding it's not possible to select the different alternative BOM of a phantom assembly when creating the planned
order for a header material.
But give a try in this way,create 2 production version with different lot size or validity date for each laternative BOM and assign
the value as 2 in BOM selection method in MRP4 view for the phantom assembly.
Correct me if I'm wrong.
Regards
Mangalraj.S

Sales BOM not exploding automatically while creating an order

Hi CRM experts,
While creating an order in CRM, the sales BOM is not exploding automatically. It explodes when doing a request download of it and then entering in order.
Found that the FM CRM_BOM_EXPLOSION_EC is responsible for exploding the BOM and it is being called as an event call in CRMD_ORDER.
CRMD_ORDER is making this event call successfully in development but not in quality system.
Could you please provide help in this regard.
Regards,
Santosh

Can you elaborate what happens when the BOM explosion happens in Quality System ?
Do you see a dump , message or exception in your WebUI ?
If you see anything above mentioned do post for more information.
Regards
Kavindra

Error while creating Production order without BOM

Hi Guys,
While creating production order without a BOM i am getting the following error in the error log.
Error: BOM for material xxxxxx does not contain any valid items
Message no. CO636
Kindly help.
Regards,
Sid

Dear customer,
could you check in the master data screen of the order if one BOM has been selected?
please coudl you check your customizing the following transactions:
OPJM
OPJI
what do you have in 'BOM slection field' MRP4 view of the header material?
Please check if with this info you can find the missing data to explode the BOM
regards
Maria

One component is not exploding in CN21,while creating throgh VA01.

Hello Friends,
Iam a PP Consultant and working on PS .
my client having variant configuration.they create standard network cn01 and allocate the phantom assembly with materials say x and y in the activity 0080 .
They created bom cs01 with dependency for phantom assembly A.
while creating sales order through VA01 the bom is exploded through standard network by selecting different variant.when i saw in the CN22 only y component is exploding and x is not seen.
Please give the solution for the same
regards,
mys

hi
check the mateial type of both x and y

Issue while creating Purchase order (ME21N)

Hi Friends,
Hope U Have a Good Day...
My issue is while creating purchase order , I enter vendor and in org.data tab I enter Pur.Org,company code and purchase group. After entering these values if I check in communication tab, the sales person and telephone fields are filled with corresponding data.
Now my requirement is after entering Pur.Org, Company code and purchase group, and if I go and check in Communication tab, these two fields ( sales person, telephone ) should be blank.
Please help me in this issue...
Thanks & Regards
Ganesh Reddy

Hi Ganesh,
This is being fetched frm the vendor master and if u wan this field to be blank
Then u hav to remove those data frm the vendor master .
Put tat vendor, comp code n purchase org
Then select pur org data alon - >chk in purch data
u can find tat sales person n telp no being appeared in the PO
lemme know if u hav any prob in getting tat .

Error while creating sales order with ref to contract

while creating sales order, with refernce to contract system is giving a message
Configuration not possible for material : Reason 3 --> Help
Message no. V1360
and the message is as follwed can any one explain
Diagnosis
This may have been caused by one of the following:
1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
3. A configuration profile has not been maintained
or
A configuration is not permitted for the material
or
4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).

Hi
I think you have both Variant configuration and BOM.
Pls ensure the following.
1. BOM masterdata is maintained for the variants
2. Variant configuration is configured correctly
Configuration profile is created for the material
Knowledge base object and run time version are available
3. Maintain materials as not relevant for delivery or dont give delivery quantity as 0
Once you are sure that these are in proper shape, you can start creating order. The problem wont come.
Reward points if it helps you.

Can MRP only create planned orders for ROH, not for FERT?

HI all,
Is there any way to only generate planned orders for raw materials after MRP, forbid creating planned orders for FERT?
We want create planned orders for FERTs manually.
Thanks,
Harvey

Harvey,
Yes, that was also my understanding of your scenario. Did you try X0 for Fert? Run MRP against the entire plant, and MRP will not create any new planned orders for the X0 parts. It will explode the BOM and create dependent requirements in the components. In addition, you can create FERT planned orders manually, or using an external planning system, and these manually created orders will also create dependent demand on your components.
If you are also using Sales orders to consume your PIR, you will also have to look at requirements determination for Sales orders. This is configured based on MRP type. If you change existing MRP types, you may have to add SD config so as to continue to pass requirements to MRP. Your SD resource should be able to help you through this, or I can give you basic instructions if you decide that the PIR/demand/planned order/dependent requirements works to your satisfaction.
Rgds,
DB49

Error determining posting period(infostructure S008,Variant Z2,RC3) while creating Sales orders from Inbound IDOCS

Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan

Thank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan

ABAP dump Error while creating service order in PCUI.

Hi Experts,
                 We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors         RAISE_EXCEPTION
Date and Time          02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj Patil

Hi Thirumala,
Thnaks for the reply.
            I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil

Deleated Valuation Type --Need Error Message while creating Purchase Order

Hi,
In our scenario , i need a message should flash , if enduser by mistake select the deleated valuation type while creating Purchase Order.
In current configuration , it's not there.
Await your expert opinion.
Regards
Shyam Kogta

I investigated this recently in our company and gave this answer:
A deletion flag does not restrict anything. It is just an indicator to tell SAP that you want this record to be deleted with the next archiving run.
The archiving run then checks if a deletion is possible or not.
So you can set such deletion flags long time in advance, even at a moment where you still have inventory.
To block materials from beeing used in business transactions, usually the material and sales status are used. But these statuses can only be set at overall, plant and sales organisation level.
In some transactions SAP issues warning messages if a material has a deletion flag. This messages could be customized to be an error and prevent any business. However, this type of restriction is not designed for our machine, as we use the material and sales status.
Anyhow, there is no message for valuation types that have a deletion flag in procurement area.
There is one for goods receipts (but only for a certain industry solution that is not used by us)
There is one for deliveries ( VL 211 ).
The valuation types are defaulted from customizing to the transaction e.g. purchase order. Or from info record to the PO. So a standard purchase order gets valuation type ABC , while an internal order (production) gets the DEF. Usually there should not be a need to change this valuation type manually.
So the only solution is to archive the material master at valuation type level.
But I guess, you already have POs with that wrong valuation type, which means you have to archive the POs first. It you have already batches with wrong valuation type, then thy have to be archived as well before a material can be archived.
And finally if you had stock in current year, then you can archive your material in year after next year, as SAP archives only materials that have no stock in current and previous year.

Issue in Exploding Alternate BOM while creating Planned Order to PR

Similar Messages

Maybe you are looking for