Issue in FM SD_SALESDOCUMENT_CREATE
Hi,
I am creating sales order using FM SD_SALESDOCUMENT_CREATE. I have used this FM as mentioned below:
CALL FUNCTION 'SD_SALESDOCUMENT_CREATE'
EXPORTING
sales_header_in = wa_bapihead
sales_header_inx = wa_bapisdhd1x
logic_switch = wa_bapisdls
IMPORTING
salesdocument_ex = l_vbeln
TABLES
return = t_return
sales_items_in = t_bapiitem
sales_partners = t_bapipart
sales_schedules_in = t_bapischd
sales_conditions_in = t_bapicond
sales_conditions_inx = t_bapicondx
sales_text = t_bapitext
sales_contract_in = t_bapicont.
Above FM is creating sales order apart from below mentioned issues:
1.Sales order header texts are not getting stored.
2.In the return table t_return , I am not getting any error messages but also I am not getting sales order number in importing parameter l_vbeln.
Kindly share your inputs.
Regards,
Rajneesh
PART-II
* Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
WITH HEADER LINE.
* Initialization.
INITIALIZATION.
v_text = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
v_text10 = 'Complete delivery'.
* Start-of-selection.
START-OF-SELECTION.
* Header data
* Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
* Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
* Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
* Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
header-COMPL_DLV = p_autlf.
header-COMPL_DLV = 'X'.
* Partner data
* Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
* Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
* ITEM DATA
itemx-updateflag = 'I'.
* Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
* Material
item-material = p_matnr.
itemx-material = 'X'.
* Plant
item-plant = p_plant.
itemx-plant = 'X'.
* Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
* item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
Similar Messages
-
Facing issues while creating Debit memo using FM SD_SALESDOCUMENT_CREATE.
Hello,
While trying to create a debit memo with reference to a Billing document with help of Fm SD_SALESDOCUMENT_CREATE I'm facing two issues.
1. While the Debit memo is succesfully created - and VBELN of VBAK is getting updated- the doc flow table VBFA is not getting updated with the debit memo number.
2. The condition price values that're being displayed in the Debit memo are completely different from the ones that I'm passing in the FM.
My FM i/p is as follows:
SALES_HEADER_IN- REFOBJTYPE -ZSB1
REFOBJKEY - billing doc num
DOC_TYPE - ZDRM
LOGIC_SWITCH-COND_HANDL
SALES_ITEMS_IN - Item details like material, quantity, UoM, etc.
SALES_CONDITIONS_IN-ITM_NUMBER - Condition item no ( taked from T-code V/08)
COND_COUNT - Cond count ( " )
COND_TYPE - Condition type
COND_VALUE - value
CURRENCY - currency
CONDVALUE - value
CURRENCY_2 - currency
SALES_CONDITIONS_INX -ITM_NUMBER - Cond item number ( same as above)
COND_ST_NO same as above
COND_COUNT same as above
COND_TYPE same as above
COND_VALUE - X
CURRENCY - X
Please help me overcome this issue.Hello,
While trying to create a debit memo with reference to a Billing document with help of Fm SD_SALESDOCUMENT_CREATE I'm facing two issues.
1. While the Debit memo is succesfully created - and VBELN of VBAK is getting updated- the doc flow table VBFA is not getting updated with the debit memo number.
2. The condition price values that're being displayed in the Debit memo are completely different from the ones that I'm passing in the FM.
My FM i/p is as follows:
SALES_HEADER_IN- REFOBJTYPE -ZSB1
REFOBJKEY - billing doc num
DOC_TYPE - ZDRM
LOGIC_SWITCH-COND_HANDL
SALES_ITEMS_IN - Item details like material, quantity, UoM, etc.
SALES_CONDITIONS_IN-ITM_NUMBER - Condition item no ( taked from T-code V/08)
COND_COUNT - Cond count ( " )
COND_TYPE - Condition type
COND_VALUE - value
CURRENCY - currency
CONDVALUE - value
CURRENCY_2 - currency
SALES_CONDITIONS_INX -ITM_NUMBER - Cond item number ( same as above)
COND_ST_NO same as above
COND_COUNT same as above
COND_TYPE same as above
COND_VALUE - X
CURRENCY - X
Please help me overcome this issue. -
Issue with SD_SALESDOCUMENT_CREATE
Hi All,
I am trying to update some custom fields while creating an order using the mentioned BAPI.
It is all being done through EXTENSIONIN structure....
Now....we are facing a small issue.....the program is giving us warning message which is as follows:
"After a structure enhancement, assignment or comparison may no longer be permitted. syntactically incorrect"
This warning message is being shown at the below location...dont know why
gs_bapi_extn+30 = gs_bape_vbak.
APPEND gs_bapi_extn TO gt_bapi_extn.
The BAPE_VBAK strucutre was enhanced to include new fields....the enhancement category for the same is 'Can be enhanced char or numeric field'.
We tried changing the enhancement category to 'Cannot be enhanced'....it still didnt work and we feel that it is wrong since it should be allowed to enhancSolved
-
How to get custom field value in vbkd table using "SD_SALESDOCUMENT_CREATE" bapi
Hi Experts,
Need your help . In one program Iam using SD_SALESDOCUMENT_CREATE bapi .
i/p for my report is am excel.
excel is having below formatt.
To create salesdoc we are using SD_SALESDOC_CREATE bapi.
but After execution of the program we are unable to find the ZZFV_SBCNT (which is custom field) in VBKD w.r.t salesdocument.
Need your help what we need to do to reflect the value in vbkd table.
Here temp will contains the data from excel
1)
FORM f_move_header_data .
wg_header-doc_type = wg_temp-auart . "Order type
wg_header-sales_org = wg_temp-vkorg . "Sales Organization
wg_header-distr_chan = wg_temp-vtweg . "Distribution Channel
wg_header-division = wg_temp-spart. "Division
wg_header-sales_off = wg_temp-vkbur . "Sales Office
wg_header-sales_grp = wg_temp-vkgrp . "Sales Group
wg_header-purch_no_c = wg_temp-bstnk . "Customer purchase order number
wg_header-pymt_meth = wg_temp-zlsch . "Payment Method
wg_header-zzychan_role = wg_temp-zzychan_role_i. "Channel Role
wg_header-zzysub_role = wg_temp-zzysub_role . "Submitter Role
wg_header-zzy_inv_for_opt = wg_temp-zzinv_format . "Invoice Format Optio
wg_header-ord_reason = wg_temp-augru . "Order Reason Code
wg_header-bill_block = wg_temp-faksp. "Billing Block
wg_headerx-doc_type = c_set . "Order type
wg_headerx-sales_org = c_set . "Sales Organization
wg_headerx-distr_chan = c_set . "Distribution Channel
wg_headerx-division = c_set. "Division
wg_headerx-sales_off = c_set . "Sales Office
wg_headerx-sales_grp = c_set . "Sales Group
wg_headerx-purch_no_c = c_set . "Customer purchase order number
wg_headerx-pymt_meth = c_set . "Payment Method
wg_headerx-zzychan_role = c_set. "Channel Role
wg_headerx-zzysub_role = c_set . "Submitter Role
wg_headerx-zzy_inv_for_opt = c_set . "Invoice Format Option
wg_headerx-ord_reason = c_set . "Order Reason Code
wg_headerx-bill_block = c_set. "Billing Block
ENDFORM. " F_MOVE_HEADER_DATA
2)
FORM f_move_item_data .
wg_item-itm_number = g_itmnumber. "Item number
wg_item-material = wg_process-matnr . "Material
wg_item-target_qty = wg_process-target_qty. "Targeted Qty
wg_item-item_categ = wg_process-pstyv. "Sales document item category
wg_item-zzylegal_i = wg_process-zzlegal. "Legal Contract
**********Added this line for vbkd-ZZFV_SBCNT****************************
wg_item-zzfv_sbcnt = wg_process-zzfv_sbcnt.
APPEND wg_item TO i_item.
wg_itemx-material = c_set . "Material
wg_itemx-target_qty = c_set. "Targeted Qty
wg_itemx-item_categ = c_set. "Sales document item category
wg_itemx-zzylegal_i = c_set. "Legal Contract
wg_itemx-zzsteady_date = c_set . "Amortization Start Date
wg_itemx-zzsteady_end_dat = c_set. "Amortization Stop Date
**********Added this line for vbkd-ZZFV_SBCNT****************************
wg_itemx-ZZFV_SBCNt = c_set. "
APPEND wg_itemx TO i_itemx.
CLEAR : wg_itemx.
endform.
3)
FORM f_move_head_ext
wg_extension-structure = c_ext_vbak.
wg_ext_vbak-zzinv_format = wg_temp-zzinv_format.
wg_ext_vbak-zzychan_role = wg_temp-zzychan_role_i.
wg_ext_vbak-zzysub_role = wg_temp-zzysub_role.
wg_extension+30 = wg_ext_vbak.
APPEND wg_extension to i_extension.
CLEAR wg_extension.
wg_extensionx-structure = c_ext_vbakx.
wg_ext_vbakx-zzinv_format = c_set.
wg_ext_vbakx-zzlegal = c_set.
wg_ext_vbakx-zzychan_role = c_set.
wg_ext_vbakx-zzysub_role = c_set.
wg_extensionx+30 = wg_ext_vbakx.
APPEND wg_extensionx TO i_extensionx.
CLEAR wg_extensionx.
ENDFORM. " F_MOVE_HEAD_EXT
*& Form F_MOVE_ITEM_EXT
* Item Extension
4)
FORM f_move_item_ext .
* Structure for BAPI parameter Extension
wg_extension-structure = c_ext_vbap.
wg_ext_vbap-posnr = g_itmnumber.
wg_ext_vbap-zzsteady_date = wg_process-zzsteady_date . "Amortization Start Date
wg_ext_vbap-zzsteady_end_dat = wg_process-zzsteady_end_dat. "Amortization Stop Date
wg_ext_vbap-zzlegal = wg_process-zzlegal. "Legal Contract
wg_extension+30 = wg_ext_vbap.
APPEND wg_extension to i_extension.
* Structure for BAPI parameter Extension - Update Indicator Fields
wg_extensionx-structure = c_ext_vbapx.
wg_ext_vbapx-posnr = g_itmnumber.
wg_ext_vbapx-zzsteady_date = c_set .
wg_ext_vbapx-zzsteady_end_dat = c_set.
* wg_ext_vbapx-zzlegal = c_set.
*wg_process-zzfv_sbcnt = c_set.
wg_extensionx+30 = wg_ext_vbapx.
APPEND wg_extensionx TO i_extensionx.
CLEAR wg_extensionx.
and bapi calling is like below.
CALL FUNCTION 'SD_SALESDOCUMENT_CREATE'
EXPORTING
sales_header_in = wg_header
sales_header_inx = wg_headerx
logic_switch = wg_logic_switch
business_object = fp_bus_obj
status_buffer_refresh = 'X'
IMPORTING
salesdocument_ex = g_sorder
TABLES
return = i_return
sales_items_in = i_item
sales_items_inx = i_itemx
sales_partners = i_partner
sales_conditions_in = i_cond
sales_conditions_inx = i_condx
sales_text = i_text
extensionin = i_extension
extensionex = i_extensionx.
still we are not getting ZZFV_SBCNT value in VBKD table w.r.t created salesdoc(g_sorder)
Please help me from this issue.
Thank You..Hi,
Please let me know how to add custom fields in the characteristic list, My clients wants department and profit center grouping.
Please tell me how to solve it..
Thanks & Regards,
Reena.. -
Error while creating sales order using SD_SALESDOCUMENT_CREATE
Hello All,
We are using to SD_SALESDOCUMENT_CREATE function module to create sales order it is working fine for single material.
When we try to create sales order with multiple matearials we ended up with the following errors
SALES_HEADER_IN has been processed successfully
000000
VBAKKOM
Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING
000000
CONFIGURATION_PROCESSING
Error in SALES_ITEM_IN 000010
000000
VBAPKOM
Internal error in communication between configuration and sales doc.CONFIGURATION_PROCESSING
000000
CONFIGURATION_PROCESSING
Error in SALES_ITEM_IN 000020
000000
VBAPKOM
SALES_ITEM_IN has been processed successfully
000000
VBAPKOM
Could any one help me out to resolve this issue.
Thanks in advance....
Cheers,
HarshaHello,
Looking at BAPI errors. It looks like you are trying to create sales order with variant configuration.
Check Below SAP Note.
900380 - Configurable items in the SD process (idocs & bapis)
Regards,
Sameer -
Issue while trying to create Sales Order from Inbound Idoc ORDER05
Hi All,
I am trying to create a sales order through an Inbound idoc ORDERS05 created out of a Purchase order. The header pricing conditions from the Purchase orders gets populated in E1EDK05 segment and this needs to go to the Sales order header conditions while trying to create the Sales order.
But when the fields are getting incorrectly mapped to the Sales order. Issue being, the segment E1EDK05-BETRG contains the condition value. But this fields gets populated to the KOMV-KWERT (condition value) screen field on the Sales order header conditions. But this should have got mapped to field KOMV-KBETR (Rate). If I look at the Purchase order, E1EDK05-BETRG is the field getting fetched from field KOMV-KBETR on the Purchase order. So this should have correspondingly got mapped to KOMV-KBETR on the Sales order as well.
This looks like a standard behavior. But if any of you have encountered this issue before please let me know if any Correction instructions are available for the same. If this some issue in Pricing conditions configuration, do let me know.Hi Paaavan
You can set a break-point include "FV45PFAP_VBAP_BEARBEITEN_VORBE" that is called by both the SAP Standard and BAPI where the data is prepared and checked in the internal table XVBAP. Compare both SAP standard VA01 and your 'Z' program for what may be different in XVBAP.
I think the problem my be with regards to the business_object number that is hardcoded in the standard function module. It has given me issues before and hence I tend to use the function module SD_SALESDOCUMENT_CREATE to create sales documents with.
Regards,
Marius -
BAPI - Sales document - Copy control issues
Hi,
I am creating a Credit memo referencing an invoice using the function "SD_SALESDOCUMENT_CREATE'.
I get the invoice pricing details using RV_INVOICE_DOCUMENT_READ. Populate the inputs manually and pass those values to SD_SALESDOCUMENT_CREATE' with the flag logic_switch-pricing set to 'G'.
I have two issues,
1. Group conditions(Freight) value is not copied from the value that is passed. Please let me know
2. pricing procedure is not copied. But I was able to overcome this by exporting the invoice pricing procedure to memory before calling the fn "SD_SALESDOCUMENT_CREATE" and importing the value in the Sales order userexit(MV45AFZZ) and change pricing procedure in tables tkomk / VBAK . Not sure if this is the correct way to implement. Please advise.
Thank You.Hello
If you want to copy all the details from invoice to credit memo request and modify the pricing type to 'G', then
please follow the below steps
1. Use BAPI_SALEDOCUMENT_COPY - This will copy the invoice data to credit memo.
2. If you need to modify the Credit memo data based on credit memo type then ask the functional owner to put the custom copy control routine (VOFM routines) and you can modify the custom routine for the VBAK/ VBAP and VBKD etc as required.
3. For the pricing issue, you need to implement a BADI in program MV45AF0T_TVCPA_SELECT. The enhancement spot is Enhancement-point TVCPA_SELECT_01 SPOTS ES_SAPMV45A.
Here modify TVCPA-KNPRS = 'G' when TVCPA-AUARN = < Credit memo Type>.
There may be other validation, depending on the business need.
Let may me know, it helps you. Thanks.
Edited by: Atul Mohanty on May 31, 2011 8:12 PM
Edited by: Atul Mohanty on May 31, 2011 9:14 PM -
How to Trigger Text Determination in SD_SALESDOCUMENT_CREATE
Hi ABAP Experts,
I mantained a Text Determination Procedure in order to copy a Text from Customer Master Data to the Sales Document Header.
The Text Determination works perfectly using VA01, but when I use FM SD_SALESDOCUMENT_CREATE to create my sales document, the text object is not copied from Customer Master Data to the Sales Order Header.
I appreciate any suggestion,
Tks.Hi Diego,
Try to pass the text through sales header fm and check whether it is creating or not.Then you will get an idea about the issue.
Regards,
Madhu. -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
Pension issue Mid Month Leaving
Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010 0.00 6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
AshwaniDear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis 01/2010 0.00 8,750.00
/139 VPF Basis 01/2010 0.00 8,750.00
/3F1 Ee PF contribution 01/2010 0.00 1,050.00
/3F3 Er PF contribution 01/2010 0.00 509.00
/3F5 Ee Mon PF contribution 01/2010 0.00 1,050.00
/3F6 Ee Ann PF contribution 01/2010 0.00 12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010 0.00 96.25
/3FA PF basis for Ee contri 01/2010 0.00 8,750.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3F4 Er Pension contributio 01/2010 0.00 541.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3R3 Metro HRA Basis Amount 01/2010 0.00 8,750.00
1BAS Basic Salary 01/2010 0.00 8,750.00
RT table for year 2009. DOL 27.10.2009
/111 EPF Basis 07/2009 0.00 9,016.13
/139 VPF Basis 07/2009 0.00 9,016.13
/3F1 Ee PF contribution 07/2009 0.00 1,082.00
/3F3 Er PF contribution 07/2009 0.00 628.00
/3F5 Ee Mon PF contribution 07/2009 0.00 1,082.00
/3F6 Ee Ann PF contribution 07/2009 0.00 8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009 0.00 99.18
/3FA PF basis for Ee contri 07/2009 0.00 9,016.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FC Pension Basis for Er c 07/2009 0.00 5,452.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3R4 Non-metro HRA Basis Am 07/2009 0.00 9,016.13
1BAS Basic Salary 07/2009 0.00 9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani -
Open PO Analysis - BW report issue
Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM DOC_ITEM DOCTYPE COMP_DEL
650000001 10 UB X
650000001 20 UB X
650000001 30 UB
650000001 40 UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampathHi Priya and Reddy
Thanks for your response.
Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No. Doc.No. Item Processkey Rocancel Elikz
41 6500000001 30 11 X ---
42 6500000001 30 11 --- X
43 6500000001 30 10 X ---
44 6500000001 30 10 --- ---
(Here --- means blank)
Thanks and Regards
sampath -
HP LaserJet Enterprise 600 M602 driver issue
Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
AnatolyI am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Windows 7 displays error message when exiting +cursor issue
Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Dougfunction(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel -
Issue in Creation of Periodicals for Contracts in CRM7.0
Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
DedeepyaHi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C -
Issue in creation of plant related data at receiving server using BD10
Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05 matmas05
E1MARAM Master material general data (MARA)
Z1KLART KLART----
My extention
E1MARA1 Additional Fields for E1MARAM
E1MAKTM Master material short texts (MAKT)
E1MARCM Master material C segment (MARC)
Z1AUSPM E1AUSPMDistribution of Classification:----
My extention
E1MARC1 Additional Fields for E1MARCM
E1MARDM Master material warehouse/batch segment (MARD)
E1MFHMM Master material production resource/tool (MFHM)
E1MPGDM Master material product group
E1MPOPM Master material forecast parameter
E1MPRWM Master material forecast value
E1MVEGM Master material total consumption
E1MVEUM Master material unplanned consumption
E1MKALM Master material production version
E1MARMM Master material units of measure (MARM)
E1MBEWM Master material material valuation (MBEW)
E1MLGNM Master material material data per warehouse number (MLGN)
E1MVKEM Master material sales data (MVKE)
E1MLANM Master material tax classification (MLAN)
E1MTXHM Master material long text header
E1CUCFG CU: Configuration data
E1UPSLINK Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PMCREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?
Maybe you are looking for
-
Query filter by date not working
We recently migrated to SAP BO 9.0. We have a query that brings up all the job orders (pending or not). The user then filters the query to pick the appropiate data. We have several problems with this approach with 9.0 as a) when you bring up the filt
-
Wether "CREATE TABLE" can be used in storage procedure of Oracle?
I am migrating MS SQL 2000 Database to Oracle 8.1.7. But I encounter a trouble, the defind sentences of temporary table in storage procedure of MS SQL can't be migrate to oracle. I have try two kinds of syntax to defind temporary table, but both of t
-
ITunes 7 will not recognize my 5g iPod
I have a 5G 30GB iPod with firmware version 1.1.2, I upgraded to iTunes 7 yesterday and thats when the problems began. After iTunes launched I plugged in my iPod and windows would detect it but it would not show up in iTunes. I ran the built in iPod
-
Backstory: Details leading to the issue I have the FCS 3 disks. Like an idiot, I somehow overwrote my copy of FCP 7 when installing FCP X. Like a greater idiot, I then panicked and before doing research to see if it simply moved to that folder with a
-
i hope i don't sound too dense, but i feel cut off from sound sources of information; i don't seem to be able to even lodge my questions in the right places; here is one in particular - why am i unable to open .zip files? every current source says 'n