Issue in Free Goods - I.C(TANN)

Dear all,
I have an issue while creating Free Goods.
For the free goods item(TANN), the net price should not be there.when I create an order for Free Goods,net price is there.
What is the cause for this?
Thanks in Advance
Regards
Balaji

please check the item category (TANN) settings at VOV7, have u activated pricing . It should not be relevant for pricing. the setting must be set as B.
Also please check in the pricing procedure, the condition type R100 requirement is properly assigned and satisfied?
Please try and let me know. any further queries are welcomable
Do reward points if u find this as useful

Similar Messages

Issue of Free Goods

Dear All
I have some is my current assignment-Customer is buying some material say "A" want "B,C" as exclusive free goods
is it possible to give two free at a time in same order ?
I only know one exlusive free good can be give to one material with combination of customer ( Customer/Material)
Looking for some inputs regarding the issue.
Can you plz suggest me if there is any possiblities for BOM?
Many Thanks
Rakesh Naveen

Dear Rakesh,
Be informed that free goods is not currently supported in combination with material structures (e.g. product selection,
bills of material, variants with BOM explosion), see note 796926.
Determination of free goods is performed in include FV45PF0N_NATRAB_SELECTION and the check is hardcoded. You will have to modify the program to get that functionality, but be carfull that any modification won't be supported by SAP, see note 170183.
I hope it can help you.
Ruy Castro

Issue in free goods(inclusive method),urgent

i have raised sales order for free goods inclusive method.for 11items (10+1).but system showing price for tann item also.it should not show free of chrge item(tann),pls help me out on this.
regards
prasad

hello, friend.
just a clarification... did you enter quantity in the sales order as 10 or 11? if 10, then your situation is exclusive and not inclusive; your free good also appears with item category TANN as a separate line item.
if you entered 11, the sales order shows only 1 line item and the pricing is calculated as 10 units, then this is inclusive. entering an order quantity 11, with the result of 10 units with item category TAN and 1 with item category TANN is also inclusive.
for item category TANN, whether or not price is displayed have the same result, and that is your customer is not charged for this item.
in the inclusive Free Goods condition record, you can execute VBN2 to change the settings. once inside the record, select your item and go to the column 'FG'; here you choose '1' (with item generation) or '3' (without item generation).
i hope this helped you.
regards.
Edited by: jonathan yap on Mar 8, 2008 10:14 PM

Free goods concept in STO

hi all,
i have an issue regarding free goods for STO betn plants.
our concept is to give free goods for ex- 10 out of 100 are free goods.
when i am creating a po with item catagory U, the free goods indicator is become vanice. so i am unable to process this free goods.
so if any settings is thr , then pls let me know.
regards,
susanta

hi
ru selling ur goods to ur plant?
in sto ur not selling the material to ur plant
so the issue of free goods is not there
thats why u cant see any kind of basic cost condition in that
as the material is transfer from one plant to another the inventory changes and so the the price in material master is get updated for the another plznt
refer following docs
with delivery
http://help.sap.com/bp_blv1600/V5600/BBLibrary/HTML/134_EN_IN.htm
without delivery
http://help.sap.com/bp_blv1600/V5600/BBLibrary/HTML/135_EN_IN.htm
hope it clears
regards
kunal
award if helpful

In Free goods how to restrict the quantity to not to alter.

Dear All,
I have maintain condition record for free goods in VBN1.EX.102.While creating sales order for 20 quantities system populates 204.But if am changing this as 152 or 205,system is allowing to do.Same is the case at delivery.How can we restrict the system to not to allow the changes in sales order in case of free goods .Please guide me.
Regards,
Deepti

Hi
KIndly check the below user exit and make the free goods item as in display mode
MV45AFZZ 'USEREXIT_FIELD_MODIFICATION'
to change the SCREEN-INPUT = 0 to make it display for free goods item category Tann
By doing above if any one changes main item system will accordingly change the free goods item also
Regards
Damu.

Free goods scheme

Dear ALL,
First let me tell you, i have searched the forum for the clue to the below topic. Could not find any clue. That's the reason am posting this question.
and also know in sap std only 1:1 is possible. but would like to know, if anybody has encountered this type scenario and what is work around.
Issue is in free goods determination
Example:
1. material bottle belongs to one division and bottle cap belongs to another division
2. different types of bottles are defined
3. Each type of bottle has a material group. and in each type there are different colors of bottle with separate material code for each color.
Example:
Material Group A bottle
Material B white color, material c blue color, material D green color etc.
Issues is if customer buys all colors then we need to issue 1 free goods.not necessary that should buy all colors. colors may vary and quantity also vary.
Hope am clear in explaining the scenario.
Thanks in advance

HI Balaji,
Thanks for the suggestion.
Can you please clarify: if bonus buy can be applied normal SD module; While I was going through forum-found that Bonus Buy is for IS-Retail. Where am working on 4.7 and not IS-Retail.
And also checked the Bonus Buy config- it isl ask Articles grouping and other related paramters.
Please correct if am wrong.
Regards
mskgnt

Regarding Free goods assignment

Dear All,
We have issue on free goods assignment, Our Company introducing the new promotional offer for products. Earlier we had a so many offers like one car to one car free, we can easily assign the free goods through t.Code VBN1, but this time this is very difference issues. Our company giving the offer to some selected customers who are booking the 3 cases main product they are getting the one case other product free. How configure in SAP?
 3 cases of Product A they getting the 1 cases of Product B.
 15 Cases of product C they getting 2 Cases of Product D.
Answers will be highly appreciated.
Thanks & Regards,
Shankar G.

Hi,
This requirement can also be mapped through transaction VBN1 only.
3 cases of Product A they getting the 1 cases of Product B.
- Go to VBN1, specify condition type NA00 and Press Enter
- Here enter Product A, min. qty as 3 and For as 3 and Free goods category as 2 i.e. Exclusive. Now you will get an additional column as "Additional material for free goods", under this column enter material code of Product B there and Additional quantity of Product B as 1.
- Save and then try creating sales order of Product A.
15 Cases of product C they getting 2 Cases of Product D.
- Try in similar way as suggested above.

How to config Free goods process like rebate

Dear Masters,
I have a problem like this:
Our customer want using free goods by accrual sales volume. If in a period, sales volume can have exp 1000 m3, buyer will get a free goods. But as I know SAP std does not support like this! Is there anyway to solve problem?
Thks a lot for your support!
Regards,
Nguyen Pham,

Hi,
The process is not directly supported in SAP, however there is a suggestion not sure how far it solves your problem.
1. Seperate order type (if the volume of such schemes is high).
2. Using VA05 find the volume of sales for such scheme product.
3. Mainatian free goods procedure for scheme product.
4. In the new order type put in the quantity referenced from VA05, have the free goods determined with TANN for the free goods & for the higher level item make it non deliverable.
By this way you would be capture the quantity for which the free goods have been given away as well as useful for reporting purpose.
There is no direct rebate like set-up possible for free goods without any custom development to my knowledge.
Regards
Subhadeep

Return Order against Free Goods.

Dear All,
We have raised one Invoice with Free Goods (Item Category TANN), while creating return order, if we delete main line item i.e zero quantity line item then all lines of Free Goods (RENN) is deleting,
please advice us how we can take return against Free Goods.
Thanks
Prashant

HI,
As i understand you want to return the free goods which delivered through BOM material via sales order.
the behavior of the system you mentioned is because of item category determination for BOM materail. the main item with the zero quantity must be the higher level item.
to return this free goods you need to delet all line items from the return order and then manualy add the free goods item and change the item category to TANN.
Regards,

Condition type need to be deactivated due to free good

Dear Gurus,
Is it possible in standard sap to deactivate a certain condition type if its a free good(item category :TANN) but work normally for other items of the order.As the pricing procedure must remain same.
Regards,
Sam Ahmed

Hi Sam Ahmed,
We can control this by maintaining the validity periods of the condition type,if the validity period of the condition type was over
it will be deactivated automatically,until you extended the validity.Everything will function normally no pricing procedure changes
is required.
Ex: PR00
valid from 29.10.2011 valid to 29.11.2011
after 29.11.2011 the condition record automatically deactivated.
check and revert
regards
Ram

Free good enhansement.

Hi all.....
M facing one issue regarding free good ..
in free good 1st line item contain material and other line contain free good and this line will display in read only mode...
in sap we have one to one relationship for free good means one item contain only one free good.
what we have to do when in particular material group the total material quantity exceed 100 only after that we have to display free goods item.
Please help me in solving out this senario.
thanks.
vinod

Hi Anda20,
just double click on the line item where you enter the free goods in vbn1 system will take you to different screen where you can do so .
also you can manually in sales order given any item for free , provided that the item category determination is done for that item
Revert if possible
Mohit Singh

Issuing more then one item in free goods

Hi SD gurus,
My client is asking to issue more then two items as free goods along the main item. Example material A is sold along with material B and C as free goods.As far as my trails, I'm able to configure only one item as free goods but not the second one. Can any one suggest to configure the above scenario?

Hi Ravi krishna,
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. if you want to give free goods X & Y for material A, then you need to enter material Y in order, simply change the item category as TANN.
As of my knowledge there is no alternative to it.
these are the constraints for free goods:
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
regards
Sunil

Free goods issue in return order

Dear Guru's
Please help to resolve the below issue
We have Free goods process, If customer is ordered 10 goods will give 1 as free good total quantity 11 for this I have maintained the condition record, I have created a sales order for total quantity u2013 100 + 10 free goods = 110 when ever I have entered the main item (line item #10) system automatically proposes the free goods quantity in line item # 20, Out this hundred quantity customer has returned 50 quantity so I have created return order with reference to invoice so in return order both line items have been copied with actual quantity (100 + 10 Free goods). So I changed the main item quantity as 50 (because customer has returned only 50 quantities + free good (for 50 items) 5 = 55)
Here my requirement is when ever I have changed the main item quantity in return order system is not calculating the free good proportionately as per the free goods condition record.(for 10 item 1 item is free)
Ex:- when I have changed the return order main item quantity as 50 still free goods showing as 10 only(in line item #20) (which is for 100 quantity)
What customization is required system should update free goods proportionately as per the free goods condition record in Return order.
Regards,
Hari Krishan

Please post it in SD/MM forum.

Regarding free goods issue scenario

Hi all,
I am working on free goods scenario . I have done all configuration steps as mentioned below
maintain condition type
maintain pricing procedure
Activate free goods determination
Q.Now here i have one question, apart from above configuration any other configuration required
Continue..then i have created condition record for free goods condition type and then i have created sales order with taking all relevant data...here free goods concept working like system automatically taking free goods from main item in case of inclusive and reducing qty from main item...
Q. Now here I have question...in sales order, should net value of free goods show 0.00? If not, then what net value should show...
because in my sales order, net value of free goods is showing value not 0.00...
Q...shall i have to update condition type RA01 with 100%(-) in sales order itself? If not then where we can update or how will show 0.00 price for free goods in sales order automatically....
Because as per my process..once i have done pgi against o/B delivery of SO..and then creating and posting billing document of generated invoice or billing document....for both main as well free goods price is taking and updating sale revenue account..
Q...please guide me where i am doing wrong...because free goods price should not be update sales revenue G/L account....

Hi
have you did the free goods item catogory detemination
Doc Typ        it.c grp          Usage           H.Lvl.Itc        Dflt.itc
OR     NORM     FREE     TAN     TANN
and check in your pricing procedure cond.type R100 has maintained with Req 55 and Base type 28.
activate free goods detemination(t.code V/N6)
s.org           D.chnl            Div                Do.pri proc     Cus.Pri.proc      Free goods procedure
0001     01     01     A     1        NA0001
Create condition record for free goods (inclusive or exclisive)
Thanks
siva.k

TANN is not determining for free goods in sales order

Hi All,
i am using the free good scenario.i have done all the necessary below settings
1.free god procedure NA0001 and assignment to sales area.
2.added condition type R100 in the pricing procedure.with requirment 55 and base value 28.
3.Item category assignment for free goods(i am using standard)
4.free good condition record in VBN1 for inclusive and exclusive.
5.in sales order i am giving correct quantity.
But in sales order the second line item for free goods (TANN) is not determining.
Kindly suggest where it went wrong ?
Regards
santosh

Hi KishorThanks for replying..
i have done the determination correctly. please find the below screens for free goods condition and sales order.

Issue in Free Goods - I.C(TANN)

Similar Messages

Maybe you are looking for