Issue in Ibase creation in CRM

Hi,
In my understanding that when I download the Equipments from ECC to CRM,Installed base will automatically created in CRM with details of partner,variant configuration etc.
But in our scenario we have only Material/Serial number combination and no equipment in ECC(even though Equipment number is there,I cannot able to see it in IE03) and is it possible to create Installed base based on Materail/serial numnber comb in CRM.
PL SUGGEST.
Regards
BABU.

Hi babu,
The equipments downloaded from ECC will appear as individual objects in CRM. These will have to be assigned to Installed bases.
In case you want them to become installed bases for each individual object, there is a report (i currently don't remeber)
Regards
Raj

Similar Messages

Issue in BP creation in CRM 7 connected using XIF from CRM 4

Hi All,
We have connected CRM 7 and CRM 4 using XIF
We are facing an issue where 2 IDOCs (with same Basic type CRMXIF_PARTNER_SAVE_M01) are generated at same time while using XIF adapter dring busines partner creation. First IDOC is succesful and other fails with error message " Business patner locked by you".
Can you please share some expertise on this.
Thanks & regards,
Mohit SIngh

Hi Bala,
Which version of CRM are you using? There are some notes for CUST_HIERARCHY BDoc errors. Please have a look at them in the Support Portal.
CRM_BUPA_MAIN_VAL is used for validation of rules set in CRM Server and maybe you dont have the same mandatory rules in MSA.
Best Regards,
Ankan

Step for Ibase creation in CRM 7.0 using equipments from ECC 6.0

Hi all,
I would request you guys to share the steps which I need to follow for the download of equipments from ECC to CRM 7.0 and automatic creation of Ibase with equiqment as Indivdual object and with details like partner etc.
I would be happy if you guys canb share any document with steps.
Regards
BABU

Hi,
Refer the following to get the understanding the Equipment download to CRM.
You define the default settings for replicating equipment in the IMG activity: Customer Relationship
Management -> Master Data -> Installed Base -> Replication of Equipment from SAP R/3 Customer
Service -> Define Default Settings for the Equipment Replication.
For more information about the integration of different systems, see the SAP Library under mySAP
Customer Relationship Management -> Architecture and Technology -> Business Integration -> CRM
Middleware.
The Business Add-In : Business Add-In: Equipment Upload (CRM_EQUI_LOAD) can be used to
flexibly enhance the data transfer and validation in SAP CRM. The Add-In offers comprehensive options
for influencing the mapping between equipment and individual objects
Also refer to the following notes:
1. Note 627279 - Serial number & configuration download
2. Note 637173 - Equipment download/delta synchronization
Hope it helps.
Regards,
Rajiv

Duplicate check on search term for BP creation in CRM

HI,
I want to do a duplicate check on search term for BP creation in CRM.
i found one BADI ADDRESS_SEARCH. But the method address_search is not getting called.
Is there any other BADI available? how can I handle this issue?

hello,
BP is BDT (Business Data toolset) enabled (you can check it by adding break point in FM BUS_PBO and executing BP transaction). You can add your check directly to standard view (the check will be executed each time when user pushes enter) or you could add you check to appropriate action (during saving etc.) there are number of actions which you could use it depends on your requirements. You can find a lot of info about BDT (if you are not familiar) in Wiki.
br,
dez_

Auto Ibase Creation

Hello - I am trying to automate the Ibase creation or update from the service from CRM 7.0. I have completed configuration on the Ibase and Action Profile Service Order - Auto_Ibase_Update by Sold To partner. When the action processes, nothing happens. I was hoping that the action would search for an existing Ibase and update the Ibase if it was found. If no Ibase was found, it would create a new record. Does anyone have any experience with the CRM Ibase functionality? Please advise.

Hi,
Check for related SAP notes for that to improve the performance.
Thanks
Suresh

Issue during automatic Creation of Work Order from Notification

Hi,
I have a issue during automatic Creation of Work Order from Notification.
BADI implemented: NOTIF_EVENT_POST
BAPI called in BADI: BAPI_ALM_ORDER_MAINTAIN
I am able to create Work Order successfully but after that i need to update notification header with created work order number.
But i am unable to update the same (VIQMEL-AUFNR).
Can anybody provide solution for the same!
Thanks,
Kumar.

Hi,
Any inputs on above posted issue!
Thanks in advance.
Thanks,
Kumar.

Automating Goods issue during Delivery creation

Hi all,
We have a requirement to automate the Goods issue creation for certain type of orders when the Delivery is getting created. The orders that need to be automatically Goods issued during delivery creation are identified based on certain plants. These plants are linked to certain output type and in the output type routine is the standard program RVADEK01 with one additonal code for automating the Goods Issue creation.
We have a custom table that holds the status of orders and there is a code in user exit userexit_save_document_prepare which changes the status of the order as closed when the goods issue is done.
But when the delivery is saved, in this case when an automatic goods issue needs to happen, when the flow reaches this user exit, the output type code dosenot get executed and the Goods issue is not done and so the custom table will not be updated with the closed status. So we are in need to findout a place where we can update the status of the order in that table.
The output type code is not executed even before the other user exit userexit_save_document. The output type code gets executed and goods issue is done after the this userexit_save_document when the COMMIT statement is executed in the subroutine BELEG_SICHEN_POST in the include FV50XF0B_BELEG_SICHERN.
I need help in finding out if any user exit or badi is called after this commit statement, so that I can add my code to close the status of the order in my custom table. Just after this commit the Goods issue happens and the VBFA table gets updated with the 'R' records for goods issue.
Please let me know if anyone has any idea on this. The ultimate goal is to find some place after the goods issue is done to update the status of the order as closed in the custom table we have.
Thanks,
Packia

Dear Siva,
As informed yesterday I changed the language from DE to EN, to match the other shipping points settings in table V_TVST, this did not bring the solution.
Please let me summarize, I am really desparate here:
This is only IM related, Not WM.
Picking lists are not printed for any Shipping Point from this warehouse, this is just a small subsidiary of my customer in Finland.
Issue is not Aut. PGI.
VP01SHP has not been configured for any shipping points, still there we do get the PR except for the new shipping point.
In the deliveries of correct processed shipping points I do not find any picking output type.
Item category in new shipping is equal to Item category in already existing shipping points, so no need to config here.
There is no picking block active.
PR creation happens once I enter the pick qty in the delivery in VL02N. This is the part that we need to have automated.
Can you please try to help me out?
Tnx & regards,
Chris

Issue in PO creation for Direct Material Procurement.

Hi Experts,
I am working with SRM 7.0 Classic Scenario.
I have no issues with SC creation for indirect materials with Account Assignment.
But when I select Order as Direct material in SC for any material with out account assignment on Approval of SC PO is created in SRM system as Extendended Classic Scenario even though I have not activated Extended classic scenario.
Kindly help me out in this issue how can I order as DIRECT MATERIAL WITH Classic scenario.
Regards,
B.N.Karthikeyan.

karthi
it is standard behavior,
but you can do one thing .
BBP_CREATE_BE_PO_NEW BADI - TRY . CLEAR THE ACCOUNT ASSIGNMENT .Thats all . check it up with technical resoucre.
but you have to decide by developemnt what are the materials are PO with account / without account assignment
br
muthu

Automatic creation InternalOrder inECC after Service Order creation in CRM

Hi,
After Service Order creation in CRM, the automatic creation of Internal Order in ECC not happening, needs to be do the related settings. Can anybody share the stepts for the same to do the settings.
rgds,
balu

Hello balu,
Have you released all items?
Also,please make sure that against the item category "Assign BW/CO" is set to Service.
Hope this helps!
Thanks and Best Regards,
Shanthala Kudva.

PO Creation after CRM Sales Order Creation

I am creating a CRM Sales Order and the moment I save the CRM Sales Order,
it creates a PO in ECC. I need to find out how PO is getting triggered?
When I open the CRM Sales Order it shows a PO already created for this Sales Order.
Has anyone face this or same kind of scenerio ever? If yes please let me know how can fnd the triggering point of PO creation.
Thanks in advance!!
Sachin

Hi Mathivana,
I had faced these issue several time. As per SAP standard logic whenever you saved order in CRM it replicate immediatly in ERP till that time the order will be locked for any further change in CRM to save transaction data intigrity. The lock gets removed once the CSA queue(notification) from ERP update in CRM than unlocked.
You check the in SMW01 transaction and perform search with order number you will find Bdocs are in Intermediate stage(I can't tell reason as it can be so many reason why Bdocs get stuck) -Select and activate the Bdocs once again if you are lucky and it activated your order till be unlocked.
Or else user report most common for this issue "CRM_CHECK_DISTRIBUTION_STATUS" pass order number number and document type to unlock distribution than you will be able to change order.
100 % sure shot answer. Appriciate if points alloted
Thanks,
prem

Error in Web service creation in CRM 7 Ehp1

Hi,
I am trying to define a web service for the creation of letter templates in CRM 7 Ehp1 system
using the WS_DESIGN_TOOL .But it is giving me error.
The component GDCOIC ,Root object GDCOIRoot, does not have the key structure defined .
So the system does not allows me selection of attribute Virtual Object for IC Web(GDCOIRoot).
Can someone give me a head start as in what could be done ?
Thanks ,
Jaya

issue resolved:)
version issue..
SAP NOTE (0001584041 Creating service object from GDCOIC component impossible) implemented.

Issues in auto creation of tasks using templates/attributes in FS

Hi,
We have a requirement to auto-create one or more tasks when a SR is created in Field Service module. Additionally, task owner should be auto-populated during the task creation (task owner would a CRM group which is dependent on the task type as per company defined business rules). There can be one or more task types associated with a SR type. Tasks within a SR type can or cannot be dependent on one or more tasks within the same SR type e.g. I can have 3 task types A, B and C under a SR type and C is dependent on B, so we set up the dependency as needed.
We were thinking of following the task template group approach. We created the task templates per SR type and associated the template with the SR type. Issue here is - we cannot assign the task owner value to the task type (I couldn't see a placeholder to define the task owner). Does anyone have pointers on defining the task owner while creating task group templates?
Another issue is - whenever there is a dependency between tasks, we cannot define the parent task id value. When you navigate to the tasks screen and select the dependent task, you get the error "field must be entered" for parent task id. Any thoughts on defining dependencies with parent task id populated when the tasks are created?
Second approach we tried is creating SR/Task attribute mapping configuration. Here we can define the task owner as well but the issue is we cannot define the dependencies between the tasks. Also we are getting the error "Attribute CUG_TASK_DEP_ID doesnot exist for item JTFTASK" and tasks are not getting created.
Any pointers on resolving these issues would be greatly appreciated.
Thanks
Shreevatsa

Hi,
Today Auto Task creation can be based on the following:
Task Template Mapping => Based on SR Type, Product Category/Product, Problem Code mapping. For this mapping, Territories need to be setup to determine the Task Owner. If Territories are not setup, the application will not auto create Tasks.
Task Type Attribute Configuration => Based on SR Type <=> CIC Attributes mapping. In this mapping definition, the Task Owner field is required to be setup. Whenever Tasks are auto created, the Task Owner setup in the definition is used.
For Task Dependency - what is the requirement? For a SR Type if three Tasks A, B, and C need to be auto created - are you looking for functionality to first create only Task A and when Task A is closed to create only Task B and when Task B is closed to create Task C?
Thanks,
Denzil

Iobject creation ibase creation and attachnig both

Hi All,
I want to create I object in CRM 5.0 . based on the excell sheet data .
is it possible to create i object in crm ?
excell sheet has sold_to , ship_to, serial no , model and product.
any function module to create ... with the above data.
is there any function module or class to create IBASE with above data .
How to attach both (Iobject and ibase)
Thanks in advance.
little urgent please.

Hi,
if the issue is not solved yetthen try these ones:
CRM_ICSS_CREATE_IBASE
CRM_ICSS_CREATE_COMPONENT
Kind Regards:
Pal
pls reward points if it helped you

Z Transaction Types not showing up at creation in CRM 5.2 WebClient

Hi Experts,
I am using CRM 5.2 with webclient.
I have just created 3 transaction types (BUS2000126 & BUS2000125) copied from standard ones.
I passed all other transactions as Inactive in SPRO.
In GUI everything is OK, I can create each of these transactions properly.
But in WebClient, when I click on "New", the pop-up appears but there is no value in it.
Is there anything I would have forget in my customizing, anything I should do in the BOL???
I 'd appreciate any help and reward with maximum points for any helpful answer,
Thanks,
Aldo

Aldo,
I know for activities (BUS2000126) they must have the correct category assigned in order to show up in the creation list. This is set under Assignment of Business Transactions Categories, and the customizing header data for the category Activity for the transaction you created.
The class CL_CRM_UIU_BT_ACT_CUST_GET controls this logic. There are calls to CRM_BSP_SALES_GET_PROC_TYPE which will retrieve the list of possible transaction types. You can look at the method GET_PROC_TYPES_FOR_SCREEN_KIND in class CL_CRM_UI_BT_ACT_CUST_GET to see this logic.
The class of the category of the activity must correspond to the allow values.
Take care,
Stephen

Number Range issues with sales orders in CRM and R/3

Hi,
We are currently using CRM4.0. I have sales orders created in R/3 and they are replicated into CRM. These sales orders can only be created in R/3. I have given them a number range of 0000000001 and 0005899999, however we have reached the number 0005899999 so we increased the internal number range for the sales orders in R/3 to 0009499999, however we forgot to update the number range for the corresponding sales transaction type in CRM so we are getting the following error in CRM:
+Enter a business transaction number between 0000000001 and 0005899999
Message no. CRM_ORDERADM_H532
Diagnosis
You have attempted to enter a transaction number which is not allowed for the transaction type.
Procedure
Enter a number between &1 and &2. Make sure that you issue a number which has not already been issued.+
We have now updated the CRM number range to match that in R/3 to 0000000001 and 0009499999 but we are still getting the error above on our existing sales orders in CRM. I thought that increasing this number range it will remove the error but when I open sales orders in CRM the error is still there.
Is there any way to remove this error message? Any tips or advice would be much appreciated.
Please note we've already checked the post Re: Number Range Problem and note 427289.
Kind Regards
JoJo

Hi Sirisha,
The solution depends on the exact issue you are facing.
The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
If this is the case, then you can follow the steps below:
1. Find the Message ID and Message No for the error message
2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
Let me know if this is not the issue you are facing.
Regards,
Nelson

Issue in Ibase creation in CRM

Similar Messages

Maybe you are looking for