Issue in IDOC to SOAP Senario

Hello Experts,
Hi have created IDOC to SOAP scenario .in which three different type of idocs are sent to XI system and in turn XI will send SOAP XML to CRM system.
The three different idocs are invoking three different services in CRM...bascially it is the Funciton Module.
So my question is in SOAP action i need to specify only that FM or any thing other than that..
Pls advice on this.
Thanks,
Vishal

Vishal,
You said you are using SOAP adapter, and also saying it is a function module. If you are uisng SOAP adapter then I hope you are sendign it to a webservice in CRM. You can either give an action or you can keep blank also. IF you want to go give then open the wsdl of the webservice and search for ACTION. There you will see a name and you can give that name.
Regards,
---Satish

Similar Messages

Idoc to Soap BPM issue

Hello Experts,
I have implemented idoc to SOAP scenario using BPM. In which idoc data is sent to CRM webservice.
But my BPM scenario is not able to handle the idocs that are coming in quick succession in SAP PI.
For one idoc i get successful response and the other i gets stuck.
Please reply
Thanks in advance,
Vishal

The BPM goes like this ..
step1. BS system -
> Integration Process IP
step2. IP -
> CRM system
If 2 idocs comes to XI system ...first idoc goes successfully to CRM system
and the second idoc is stucka after step 1 .

Idoc to soap sync without bpm. is it possible? Helping me..

Hi Experts,
i have a small clarification Idoc to soap sync interface in sap pi 7.0. i created IDoc to Soap sync using BPM but some times the signals are stuck due to load issue in swpr, while reprocess those signals all going successfully to the receiver. So We are trying to eliminate BPM.
I just wanted to know Idoc to Soap sync scenario without BPM is possible or not in SAP PI 7.0?
if it is possible kindly send me the links
Regards,
Kiran polani

Hi Kiran,
Could you please let us know the exact requirement. How do you want to send the response back to IDOC?
ASync - Sync Bridge with IDOC sender is not possible in PI 7.0.
If It is something like IDOC --> SOAP --> IDOC , And If the SOAP request is small then you can use SOAP Lookup in IDOC to IDOC Scenario.
In The mapping You can do a lookup and get the response from SOAP(Webservice) and map that to your Target IDOC.
This is one possible way for you without BPM in PI7.0.
Please let me know if you need more details about this.
Thanks
Jyothi A

IDOC to SOAP

Dear All,
My scenario is IDOC to SOAP(Asynchronous) .
In MONI ,I am able to see the succesful message but in receiver communication channel, I am getting the following below error,
SOAP:call failed:java.net.ConnectException:Connectiontimedout:
Please suggest me on this.
Regards,
Lavanya B.

Hi Lavanya,
Its very hard to tell exactly where it is going wrong. Some issues are already mentioned by prateek. Apart from it you can take the receiver payload and see whether it is the same as expected by the webservice or not. If possible try to load this payload manually so that if any issues are there you may come to know.
Regards,
---Satish

Regaring File to IDOC Useing SOAP Adapter

Hi ,
Can any one please forward me an File to idoc Useing SOAP ADapter Senario.IF i am wrong please send me a simple senario of useing SOAP Adapter.
Regd's
Raj

Hi Raj,
I think i will give you some more information about SOAP adapters,So Please go through the link below and follow the steps mentioned in it while defining the web service.Then you will get to know the actual use of a SOAP adapter.
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/31/daa0404dd52b54e10000000a1550b0/content.htm">Defining Web Services</a>
Sending a Simple SOAP envelope to XI via HTTP using ASP
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1442 [original link is broken]
More links for SOAP Adapter:
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
http://help.sap.com/saphelp_nw04/helpdata/en/9f/fdca3f01f33e1ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
You can create SOAP Request from WSDL using the following tool.
http://www.gotdotnet.com/Community/UserSamples/Details.aspx?SampleGuid=65a1d4ea-0f7a-41bd-8494-e916ebc4159c
You've to expose your outbound message interface as a WSDL which can be used by say EP.
Also go thru the following threads
Re: WebService
Re: SOAP Client for Synchronous Scenario
Re: How to test a webservice as a standalone?
Also check this Pdf for the Receiever SOAP Adapter configuration:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/40728f7b-0401-0010-d9bc-8c73884a3789
Regards,
abhy

IDOC to SOAP synchronous scenario

Hi All,
We have an IDOC to SOAP synchronous scenario in which IDOCs are sent to SOAP by calling a service and then SOAP sends a response back to XI . The response is not sent to SAP- R3. Please suggest on this
Thanks

Hello Rajesh,
Thanks for your good justification.
Here I have also replicated same kind of scenario and having same kind of issue.
One thing just wanted to confirm - Even though SOAP adapter expects HTTP 200 response back from webservice, still SOAP channel is getting into red with following , and as we have Alert configured ...Alert mail also receiving as part of Error only. So How can we avoid that response ? Is there have any parameter to handle or suppress the response back?
Thanks!
Goutam

IDoc to Soap, with BPM - Permanent error in BPE inbound processing

Hi Experts,
IDoc to Soap, with BPM - > Permanent error in BPE inbound processing
How to rectify this any issue???
Thanks-
sk

Hi,
The inbound processing encountered a permanent error and the queue therefore stopped.
The error message "Permanent error in BPE inbound processing" may be caused by the following:
- At the start or when you process a process instance, the inbound processing encounters an exception that was not handled. This exception is triggered, for example, by a transformation step, a synchronous send step or a control step but it was not caught in an exception handler branch. If the exception that was not handled occurs in the first transaction of the started process instance, the system does not write the process instance to the database but it sets the queue that has this error message to the error status.
Refer to the help in Note 1082099
- The inbound processing triggers this error if the correlation evaluation shows that a message should be delivered to a process instance that has the status "error". Since delivery to process instances that contain errors is not permitted, the queue is stopped.
Use the simulation of the message delivery in the detail view of the relevant queue LUW to determine the relevant process instance for the affected message and use transaction SXMB_MONI_BPE "Continue Process Following Error" (or transaction SWF_XI_SWPR) to continue. If you cannot continue the process instance, check whether you can logically delete the instance. In this case, use the method that is described in Note 807906 to logically delete a process instance.
Check whether your system contains other process instances that have errors in order to detect similar problems. Use transaction SXMB_MONI_BPE "Continue Process Following Error" or transaction SWF_XI_SWPR.
Use the report RSWF_CRL_MAINTAIN to check all of the correlation instances in question or the relevant process instances that you can reach using "Display Work Item".
- Messages that cannot be delivered because no correlation instance can be found may lead to the error that is mentioned here. Check whether the causes that are outlined in Note 1094028 affect your case.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful.

Explain about Idoc to soap scenario

Hi All,
I am beginner to sap pi can anybody help me out, How to perform Idoc to soap scenario...

Dear Gaffar,
Please use the search functionality to learn.
Redirecting...
http://www.google.com/cse?cx=013447253335410278659%3Ak8ob9ipscwg&ie=UTF-8&q=idoc+to+soap+scenario&siteurl=www.google.com…
try out the scenario,create the thread if you face any issues.

IDOC to SOAP Scenario : Connection Refused

Hi Everybody,
I am working on Idoc to SOAP Asynchronous scenario.
I have an issue with the connection from SOAP to the websystem at the receiver.
Around 60% of the messages are processed successfully and the rest of the messages throws up errors at the receiver Adapter.
Below is the log from Communication channel for the unsuccessful messages.
Message processing started
request entering
SOAP: call failed: java.io.EOFException: Connection closed by remote host.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Connection closed by remote host.: java.io.EOFException: Connection closed by remote host.
Is there any setting we need to make for the SOAP adapter to reduce these failures?
Or is it a problem with the receiver websystem?
Can somebody help me out on this?
Thanks & Regards,
Zabiulla

Hi,
For some reason the client (from the server's point of view - it might be some other device between the actual client and the server) is closing connection during the SSL handshake. As we can't get more info from the standard J2EE Dispatcher log files, we need more detailed info.
Please check
1. Execute network router trace utility (tracert for Windows systems or traceroute for UNIX flavours) to the J2EE Engine's host. It will show the active and non stealth routers between the client and the server:
c:\> tracert [J2EE_host] (windows)
$ traceroute [J2EE_host] (UNIX)
2. Activated low level SSL tracing
regards
Aashish Sinha

SOAP Receiver/Sender in IDOC- XI- SOAP receivers?

hi,
i have idoc-> xi-> soap receiver.
1. How can i get a response back from soap receiver?
2. in the above scenario is SOAP the receiver or agian the sender?
3. not sure how i can get a response back from the soap receiver?
any tips would be helpful.
thanks,
tirumal

Hi,
It should be
<i>
Under Target URL, enter the complete address (URL) of the Web service provider that you want to send the message to.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/content.htm
What are you specifying?
Can you give the entry in Target URL...
Regards
Suraj
Message was edited by: S.R.Suraj

Error in IDOC to SOAP

I am doing IDOC to SOAP(3rd party) scenario and I get this error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert sender service to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have searched the forums and there is lot of info on this,
According to this blog
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
He says Click on the Business System and see the adapter specific Identifiers,So do I have to click on my 3rd pary Business System here? since for IDOC sender there will be no BS.Am I correct.
Thanks

Hi Guest
first login to SDN with good name
This problem occurs due to INVALID SENDER SERVICE
kindly check in your configuration whether you have given a valid name to your sender service and also check the conditions in RCVR deetermination
if not modify that and activate again .Make a CACHE refresh
hope this will work for you
Regards
sandeep
PS if helpful kindly reward good points

IDOC to SOAP asynchronous scenario Error handling

Need an expert!!!!!!!!! advise on error handling for IDOC--PI--
SOAP scenario.This is a asynchronous scenario where PI is calling a Legacy system using SOAP adapter.My question is how i can do error handling in this scenario.If i get an alert in pi with payload variable that would be fine, do i need to use BPM and if that is tthe case what will be steps.
Appreciate your help.
Manish

Hello Manish,
My question is how i can do error handling in this scenario.
Use the standard alert framework. Search on SDN / SAP Help for details.
do i need to use BPM and if that is tthe case what will be steps.
BPM is not required to raise alerts, as this is an async call.
Regards,
Neetesh

Mapping issue in idoc to JDBC scenario

mapping issue in idoc to JDBC scenario
source structure
E1KNB1M
BUKRS = 1000
E1KNB1M
BUKRS= 9000
E1KNB1M
BUKRS= 2000
THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above
TARGET field : ISFRANCHISE
if any where value of BUKRS =9000 we have to pass Y to the target filed, else N
if BUKRS = 9000   THEN ISFRANCHISE= Y
               ELSE
            ISFRANCHISE=N
I've done the mapping as below
BUKRS = 9000--> IF THEN Y ELSE N--
> ISFRANCHISE
BUT everry time the target value is N only
pl suggest
rgds
mojib

mapped like this
BUKRS--->SORT---->
                                             EQUALS --------IF---THEN    Y
9000------------------------>                                               ----------------->ISFRANCHISE
                                                              ELSE   N
context of BUKRS set to parent node
its worked
thanks to all for valuable suggestions
rgds
mojib

IDoc - XI - SOAP - XI - Mail

Hi all,
I want to do the following scenario:
IDoc is sent to XI, Xi is doing a Soap call with information from the Idoc, from the soap call I receive a response code. This response code will be sent by mail TOGETHER with info from the Idoc.
I've made the scenario from Idoc to Soap call. I also know how to sent information out with the mail adapter.
Where the problem is for me, is the combination of this all together.
I guess I have to use BPM for this?
Can anyone point me into the right directions for this problem?
Thinks like wich message types, interface mappings etc?
Thnx in advance!

I guess I have to use BPM for this?
Not necessary.
U may perform a Idoc - Xi - Mail scenario with Soap lookup in mapping
Webservice Calls From a User Defined Function.
Regards,
Prateek

IDOC --- XI ----- SOAP

Hi All,
Our Scenario is IDOC XI SOAP synchronous.
We get data from IDOC to XI and send it to SOAP, I get response back from SOAP which is sent to R3 by STATUS IDOC.We have implemented BPM in our scenario and there is no Exception handling.
My question is, if the SOAP server is down then I get a System Error.What we want to know is
1. Whether it is possible to send the failed IDOC again to SOAP from XI and get the response back( I guess this is not possible in our case). Does Exception handling enables this feature ??
2. Is it possible to know the status of SOAP server in BPM so that we can keep the incoming IDOCs in queue and send them once the SOAP is up?
3. If Exception handling/Fault messages concept is implemented then can we send response back to STATUS IDOC from XI(Note: We need the incoming IDOC number must for this as R3 should know which IDOC is failed).
Points will be rewarded for helpful answers.
Thanks & regards,
Satish

Hi Satish,
1. Whether it is possible to send the failed IDOC again to SOAP from XI and get the response back( I guess this is not possible in our case). Does Exception handling enables this feature ??
Ans) It is possible to resend the data from the XI system if it is failed and sits in the Adapter engine (Message monitoring) here you can resend it once the SOAP server is up.............
2. Is it possible to know the status of SOAP server in BPM so that we can keep the incoming IDOCs in queue and send them once the SOAP is up?
Ans) Yes it is possible to know the status of the SOAP , for this you need to include a step in the BPM to have a lookup at the server(SOAP)...Once it is up the workflow can be restarted again manually.................
3. If Exception handling/Fault messages concept is implemented then can we send response back to STATUS IDOC from XI(Note: We need the incoming IDOC number must for this as R3 should know which IDOC is failed).
Ans) Yes if the exception handling is done then it is important to have the incoming idoc number so that the response will be send with this idoc number and also the status of the mentioed idoc ..you can achive this with exception handling
Regards
Sai
Reward with points will helpfull

Issue in IDOC to SOAP Senario

Similar Messages

Maybe you are looking for