Issue in Initial Download R/3 and CRM

Hi,
I am trying to do an initial download from R/3 to CRM. But I get a "SYSFAIL" status. On checking the transaction SMQ1 on ERP side, I see that RFC destination point to self for which the connection type is "I" i.e. Internal. I also tried to change the RFC destination, then it gives a message "No LUW exists in the Specified Queue".
I have referred to the note number 588701 and checked everything is fine according to that note.
All necessary entries have been maintained in CRMCONSUM, CRMRFCPAR. the queues have been registered correctly. Entries in SMOEAC transaction are also checked and they are fine.
Please guide me here.
Harsh

The issue has been resolved after applying note 760518 as R/3 was a system copy and a wrong entry was maintained in the table CRMPRLS.
Note: Please get in touch with your admin or an ABAP coder before applying this note.
Harsh

Similar Messages

  • I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be

    I initially downloaded the application and was able to gain access to all of my photos through album, photostream, fb, etc. Now it will not pull any. After deleting the app and attempting to download it, it says I must pay for it (again) any help would be appreciated.

    Sounds like a verification issue on whatever marketplace you bought PS Touch from. Did you try contacting Google or Apple to see what they say?

  • Stopped Initial download for Bupa_Main  in CRM in between

    Hi Experts,
    We have a problem in CRM. The initial download for the object BUPA_MAIN was accidently started by one of collegues.
    The job ran for almost 24 hour adn was still running. The queues went as high as to 40000 entries & the outbound queues started getting stuck in ISU system
    So we had to finally kill the job & things resumes as normal...
    Can anybody let me know as to what would be the impact of killing the job...

    Hi Rohit,
    Thanks for the info.
    Please let me know as to which table will i have to check to see if the download is successfully completed. ( for object BUPA_MAIN)
    And did u mean unlocking the queues by quoting 'clearing ' the queue. We we did clear the blocked queue (r3ad* ) but the queue R3AI* got cleared automatically...
    Also it seems that the R3AI* queue is still running even cancelling the job.
    Also shows as a error in SWMP tcode indicating a abort of initial download.  How do i get rid of it.

  • BP initial download error: CRM_BUPA_FRG0040, Attribute do not exist

    Hi,
    I am trying to make an initial download for BPs on CRM 5.0 from R/3 4.7.
    For some of the BPs I am getting an error (CRM_BUPA_FRG0040 / 402) saying:
    - Attribute 9 09A do not exist
    - Attribute 3 2. do not exist
    Those BP's having the error were not transferred to CRM.
    What could this error be related with?
    Dou you have any idea?
    Thanks in advance...

    Hi Nigne,
             i presume the error is related to Classification data of BP. but could not get what is error exactly related to. Please try to check where therea are anything missing in classification data of BP
    Siva

  • Initial Download Issue : CUSTOMER_MAIN

    Hi,
    I am downloading the customers from the R/3(ECC6) to CRM 5.0.
    I have done the PIDE settings in the R/3 and the groupings in the CRM.
    The customers are getting downloaded to the CRM system correctly also.
    But the ISSUE is with some of the account groups.
    Ex. I have account group ZPR which is mapped to the ZPR group in CRM.
    The customer XXXX which is getting downloaded to CRM as YYYY as i have configured it as external number.
    In the Identification Tab of Tcode : BP.
    A field for The External BP number and also a table control which will have the CMR002 as the ID type.
    The R/3 number is getting populated correctly into the table control with the ID Type : CRM002 and the Identification Number as the R/3 customer number(XXXX)
    But the External BP number field is not populated correctly.
    This is happening only when i download bunch of customer with the filter on the account group.
    If i initial download one customer at a time then the External BP number and the ID type and Numbers in the table control are comming correctly...
    What could be the problem to get uncorrect number in the External BP number when compared to the ID type and the Identification Number?
    Any config isssue ........
    Pls advise.
    R

    Hi,
    Thats strange.
    What i would suggest is, to check if any Middleware User Exits are on for BP transfer.
    If not, then this means the standard code aint working properly.
    In this case, you should raise an OSS to the SAP.
    Reward with points in case helpful.
    Sharif.

  • Problem with initial download from R/3 to CRM

    Hello All,
    Initial we were able to download & replicate all object from CRM to R/3  & vice versa such as product ,BP, sales documents & conditions etc. After that <<removed>> R/3 system was refreshed by Client itself. After refresh, connectivity between R/3 & CRM is disturbed.We have observed that while initial download we are facing problem in SMQ1 & SMQ2. After debugging we found that table entry  i.e. table :- CRMMLSGUID from CRM & CRMPRLS from R/3 have Logical system guid values different( which  should be identical). Because of this no replication is happening between CRM & R/3. How to rectify this?
    Regards
    Priyanka
    Edited by: Rob Burbank on Dec 9, 2011 4:37 PM

    Hello,
    see note 588701:
    "The queues are deliberately halted since the change of the logical       
    system name in the R/3 backend or the linking of new R/3 backend clients 
    to a client of the EBP/CRM Server with the same logical system name as a 
    client already linked to the R/3 backend would lead to severe data       
    inconsistencies in various CRM applications.                             
    For this reason, such changes are not allowed on principle. The halting  
    of the queues prevents such data inconsistencies. The following          
    situations may lead to the queues being halted:                                                                               
    o  The logical system of a client of an R/3 Backend system linked to 
           the EBP/CRM server was changed in current operation.                                                                               
    o  A new client of an R/3 Backend system or a client of a new R/3    
           Backend system was linked to an existing client of the EBP/CRM    
           server where the logical system name was already assigned to a    
           client of an R/3 Backend system linked to the CRM server before.  
    There are different cases in which different forms of processing are      
    required or where several options exist:                                                                               
    -  The logical system name of an R/3 Backend client was changed    
              in current operation. In this case, the data hangs in the       
              outbound queues of the R/3 Backend system as specified under    
              point 1 of the symptom. In this case, the logical system name   
                                                                     Seite 2                                                                               
    must be changed back to the original value. Then the outbound   
              queues can be reactivated. If no data was transferred to the    
              EBP/CRM server before the change, also a correctioin of the     
              check table is possible.                                                                               
    -  The same logical system name was used again in a new client of  
              an R/3 Backend system that was linked to the EBP/CRM server.    
              In this case, the data is in the inbound queue of the EBP/CRM   
              server with the exception GUID_FOR_LOGSYS_CHANGED. In this      
              case, the queue entries which have status SYSFAIL must be       
              rejected, however, not the entire queues. If the new client of  
              the R/3 Backend system you have linked has exactly the same     
              data as the old client and if it is meant to replace the old    
              client (that is, this was deactivated), also a correction of    
              the check tables is possible. In this case, the inbound queues  
              can be reactivated after the correction.                        
    The correction of the corresponding check tables or the correct           
    procecure in individual cases is to be agreed upon with the support of    
    SAP or SAP consultants at the customer site. In justified cases, SAP can  
    carry out the correction of the check tables.           "

  • Initial download of Z contract table from R/3 to CRM

    Hi,
    We have two contract tables called ZCONTRACTHEAD and ZCONTRACTITEM in our R/3 system which we bring to our CRM system to the same respective tables.
    We use a downloadable object ZZCONN_HEAD and ZZCONN_ITEM in transaction r3ac1 and do an initial download using r3as.
    My problem is that in CRD client 200 which is mapped to R/3 client 200, this download does not bring any data into CRM. The download says complete but I get a BDOC error in SMW01 saying validation error.
    This download works perfectly fine in CRD client 100 which is mapped to R/3 client 600.
    I know that this is custom table and not a SAP standard table. But I really don't understand why this would work in one client and not in the other client. I have checked the RFC destinations and also did some other initial downloads on CRD 200 which works fine except for this particular table.
    Could you please give me your opinion on how can I debug this and find where is the problem? After doing few debugging myself I found out that I am getting the validation error in BDOC in CRD client 200 is because the intitial download is not bringing any record from R/3.
    Due to this problem our contract pricing is not working on our DEV system and I am not able to do any further tests or enhancements.
    Any suggestion or insight on this will be very helpful.
    Thanks,
    Prasoon

    Hi Michael,
    Thanks for your reply. I tried to debug the initial trasfer from CRM to R/3 but I am not able to debug the function in R/3. Also when I do a Test Function module in R/3 I am not sure as what correct parameter to put. I did refer few OSS notes 656823and 573857 but was not able to debug it in R/3. We are on CRM 3.0 Service Pack 14. Could you please suggest as to how can I debug this initial download ?
    Since this initial load works perfectly fine in the other client(100) and not in in client 200, I am not sure what could be the problem.
    Any suggestions will be appreciated.
    Thanks,
    Prasoon

  • Initial download from crm 5 to ecc 6

    Initial Download of ECC 6 customer_main to CRM works well but mapping of bupa_main from CRM 5 to ECC 6 didn't work.
    In R3AS I got an short dump:
    GETWA_NOT_ASSIGNED_RANGE
    So I tried CRMM_BUPA_MAP to send single customers and I got that error.
    Partially send, receivers have errors:
    I have checked all the fields in the ecc6 settings and crm5 also.
    it is very urgent bec. iam at client side.

    Hi Devi,
    Ya now its clear. So basically you are dealing with the data exchange between the R/3 customer to CRM business partner.
    As you mentioned that the CUSTOMRE_MAIN load is successful
    and that means you have already done the account group to calssification mapping in R/3 transaction PIDE from R/3 to CRM. Pls check the same transaction for the data flow from CRM to R/3. Also check the number range assignment. For more detail check the best practice guide C03.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • CRM2007 - Initial Download - how to download the BP of the ERP to CRM

    Hello guys,
    I'd like to know how can I make sure that the Business Partners - which are already existing in ERP - are created in CRM as well ?
    Is there customizing flag during the Initial Downlaod?
    Thanks a lot for any helpful comments.
    BRGDS
    nicholas

    Hi Nicholas,
    What should be ensured is:
    -whether the initial download was finished successfully
    with green light in r3am1 transaction?
    -whether all the related inbound and outbound queue has been processed without error?
    smq1 and smq2 in both systems;
    -whether all the bdoc are with green status
    transaction smw01
    And there is a tool SDIMA, which can be used to compare the master data between systems, and find the inconsistency and fix them.
    Customizing flag? what kind of flag are you interested?
    Initial download object CUSTOMER_MAIN
    Hongyan

  • Trying to be sure I have latest versions of Lightroom and Photoshop (I am on monthly subscription plan).  After I sign in - told I need "administrative privileges to continue."  The initial downloads went without any problem.

    Trying to be sure I have latest versions of Lightroom and Photoshop (I am on monthly subscription plan).  After I sign in - told I need "administrative privileges to continue."  The initial downloads went without any problem.  I am not sure what to do next.  My computer is at home.  It is a new iMac.

    Are you using your Mac with an Administrator account?
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Initial Download CRM 5.0

    Hi together,
    tried to start initial download CUSTOMER_MAIN
    from mysap erp to crm 5.0. All queues looks ok and
    status is green. But the BP were not transfered so I checked the BDOC's and found the following error.
    Error Message:
    Enter at least one number for the business partner
    Area:
    R11
    Any idea? Thanks

    Hi Jenny,
    Please check the number range settings in CRM as well as R3. This error says that u have a external number range assignment in CRM and the BP coming from R3 does not pass the BP number.
    Please check number ranges in both systems according to grouping....
    Regards,
    Ajay Gupta.
    Reward points if it helps.

  • Initial Download OLTP to CRM

    Hi friends,
    Need some info and appreciate, if you could provide some clarification on the same?
    How can we defferenciate whether the object is downloaded Initial download or Delta load?
    Could you name couple of Customizing objects for the Initial load?
    Thanks in Advance,
    ErnieNite

    1) To differentiate the Intial download and delta dwonlad in CRM
         queue name for initial download: R3AI_*
         queue name for Delta download: R3AD_*
    3) Customizing objects:
       1)DNL_CUST_ACGRPB -- accounting group for BP
       2) DNL_cust_ACGRPP-- account group product.
      You can find all of the customizing objects in tcode R3AC3.

  • MySAP CRM Initial Download Configuration document

    I could not locate the document mySAP CRM Initial Download Configuration. It is not attached on SAP Note 350176. Is it available via a link?, or perhaps someone can send it over via email?
    Regards,
    James
    ajloren2000<at>yahoo.com

    Hi James,
    The documents
    - B01: CRM Generation
    - C71: CRM Connectivity
    - B09: CRM Customizing Replication
    - C03: CRM Master and Transaction Data Replication
    in the SAP Best Practices for CRM documentation at the below mentioned link will be helpful to you
    [http://help.sap.com/bp_crmv250/CRM_DE/index.htm]
    To open those go to  Technical Information->Building Block Library
    regards
    Srikantan

  • Guideline Performance Initial Download from SAP for Utility into SAP CRM

    Hello,
    Please find below a link (valid for 10 weeks) to the document Guideline Performance Initial Download from SAP for Utilities into SAP CRM. The document is also published in the SAP Service Market Place at http://service.sap.com/utilities. Then choose Technical Information Center - Migration.
    The purpose of the document is to give guidelines as well as to share experience for an efficient and high performance execution of an initial download from an SAP for Utilities system to an SAP CRM system, such as:
    - Configuration of the initial download
    - Ensure optimum performance for the initial download of the relevant business objects
    - Avoid unnecessary business data being downloaded
    - Monitoring of the initial download and taking corrective actions in case of problems
    - Handle errors occurring during the initial download of business objects
    - Minimize performance bottlenecks
    The document explains the setup and configuration of the SAP for Utilities and SAP CRM systems only if necessary for the understanding of the solution of a described performance problem. This document does not cover the performance optimization of the delta down- and upload and the synchronization download.
    The document has the following structure:
    Chapter 1 describes the basics of an initial download
    Chapter 2 describes how to plan and execute tests to achieve an acceptable performance
    Chapter 3 describes the most important technical activities to prepare the involved systems
    Chapter 4 describes the most important functional activities to prepare the involved system
    Chapter 5 describes how to perform an initial download
    Chapter 6 describes measures to improve the performance of an initial download
    Chapter 7 provides a list of important repository tables
    Chapter 8 contains a list of important SAP Notes related to initial download
    I'd highly appreciate your valuable feedback on this document.
    Kind regards,
    Fritz
    Edited by: William Eastman on Feb 17, 2011 2:34 PM

    Hi Fritz,
    sorry for the late late reply but I didn't notice your answer.
    Here are my answers:
    (1) I monitored the behaviour on the CRM system, CRM 7.0, SP5
    (2) The change should be implemented in the CRM system
    (3) Deactivate buffering for scenarios marketing, sale and service via SM30 and table T770MATTR.
    By doing this the initial load of 3.2 million business agreements took around 2 hours, with activated scenario buffering I was at least ten times slower.
    After the initial load you have to activate the buffering again.
    Interesting to know would be why the scenario buffering only affects the initial load of business agreements and no other object. As far as I know the scenario buffering is relevant for the organizational management.
    Regards
    Alexander

  • Difference between Delta download and Initial download

    Hi friends
    what is the difference between Delta download and Initial download
    what Tcodes are used for Delta download and what tcodes used for initial download
    regards
    krishna v

    Hi,
    The CRM middleware allows the following two methods for replication.
    -Initial loads:
    Launched manually (tcode R3AS), the objects (customizing or business) are replicated between SRM and R/3, according to the filters you've put on the object (R3AC1 for Business objects like MATERIAL, R3AC3 for customizing objects like DNL_CUST_PROD0 and 1).
    -Delta loads:
    This option is only possible for Business objects, which is the case of MATERIAL.
    With this option a daemon is launched between the 2 servers. Every modification made on an object on SRM or R/3 is transfered as soon as this object is contained in the filter retrictions (creation and/or modification). this is done through transaction R3AC4.
    BR,
    Disha.
    Do  reward points for useful answers.

Maybe you are looking for