Issue in installing SMP 3 SDK

Hi All,
When I install the new SMP 3 SDK, I receive an error that the operating system is not supported.
It is a Win 7 Home Premium 64 - bit edition. It does not make sense because the PAM states that Win7 is supported. Is home premium not a part of it ?
Can someone help me with this please.
Thanks for the help.
Cheers
B

However, I noticed that my installation zip has an executable for AMD processors only. Is there a different executable for Intel processors. Could that throw up an OS incompatibility error ? Or is it the processor compatibility ? It would have been so much better, if the error message was more descriptive.
SMP runtime and mobile sdk installer is coming with setupAMD64 for windows.
I tried to install mobile sdk at Windows 7 professional with Processor: Pentinum(R) Dual-Core CPU and it did work.
And it also worked at other machine with processor details: Intel(R) Core(TM) i5-3470 CPU @ 3.20Ghz and Windows 7 professional
Stan Stadelman Can you please help here? Can't we install SMP on Windows 7 Home Premium?
Rgrds,
JK

Similar Messages

Instal Adobe Portfolio SDK

Hello,
I would like to create some portfolios for Acrobat XI, however I don't understand the following:
'Installing the Portfolio SDK
Before you can begin developing your Navigator, install the Acrobat Portfolios SDK, install the acroFlashDebug.api plugin into Acrobat, and install the Navigator plug-ins for Flash Builder. The Acrobat Portfolio SDK was developed based on Flash Builder 4.01 and the Flex 4.1 SDK. All instructions in the Acrobat Portfolio SDK are based on Flash Builder 4.01. I am using Flash Builder 4.5 and other than a few very minor issues, everything works as expected but because the directory structure of Flash Builder 4.5 is slightly different from Flash Builder 4.01, installation is slightly different.'
A more detailed installation guide would be appreciated. I've already downloaded the sdk zip file. As to the other components I have no idea. Anyway, I don't know how to instal anything. Shame on me. Much obliged if you can help.
Best regards,
Rodrigo.

PDF Portfolios have an essential failing. In order to display the fancy preview that makes them appealing, the require Flash Player. If you have Acrobat 9 or X, or Reader 9 or X for Macintosh or Windows, the Flash Player is embedded, and they usually view the way expected.
However, there are many situations where the PDF Portfolio will not display correctly: (1) You have an older version of Acrobat or Reader; (2) You have Acrobat X or Reader X installed and Flash Player is not installed on your computer (no longer is there an built-in Flash player); or (3) you're viewing the PDF Portfolio on an iPad or iPhone because iOS devices have never supported Flash Player.
In some of these situations, you may see a message that you saw: "For the best experience, open this PDF portfolio in Acrobat X or Adobe Reader X, or later." But that is a very misleading message.
In Adobe Reader for iOS just displays the PDFs that included in the PDF Portfolio.
I believe that in the future PDF Portfolios will probably fade away for those reasons.

Error while installing SMP 3.0 in win8.1

Hi Experts,
I am getting the below error while installing smp-3.0 server in windows 8.1 kindly help me inorder to resolve the issue.

Hi Sandeep,
I remember once i faced the similar error while installation of smp 3.0 on Windows 8.1. Please check Problem installing SMP EBF 22701 3.0 SP03 , I have shared the workaround that worked for me.
Rgrds
JK

I am having issues with installing a Ricoh MP C2500 printer on Lion in my MBPro Ci7

I am having issues with installing a Ricoh MP C2500 printer on Lion in my MBPro Ci7 Where is appletalk or the replacement?
My it guy has set all the Ricoh (The only brand of printers we use.) to enable Appletalk. I am unable to see how to enable appletalk or an equivalent on Lion and have spent 3 hours now searching for it. If I connect to the printer via TCP/IP it prints random characters. I have a Ricoh working for another moddle but I am needing to use this machine. HELP!!!!!

AppleTalk has been gone eons ago. Connect via USB and see what happens. If you are networking the printer then advise on your connection set up.

Issue in Installing Oracle Service Registry 10.1.3.1 on Soa Suite 10.1.3.3

Hi,
I am facing issues while installing OSR 10.1.3.1 on soa suite 10.1.3.3
Below is the log message -
Configure Systinet Registry module ..
Configuring Registry...
[java] [java] ERROR: account.com.systinet.uddi.account.AccountCoreApiImpl - Initialization of accounts has failed. The config file with accounts probably has a bad format. For help please contact the administrator of the registry.
[java] [java] EXCEPTION: Length is too small. The minimal allowed length is 1.
[java] [java] org.systinet.uddi.InvalidParameterException: Length is too small. The minimal allowed length is 1.
ERROR: group_core.com.systinet.uddi.group.GroupCoreApiImpl - Initialization of groups has failed. The config file with groups probably has a bad format. For help please contact the administrator of the registry.
[java] [java] EXCEPTION: The user with login name 'admin' does not exist.
Configure BSC module ..
Repacking compiled bsc.jar JSPs for oraclefull
Make Service Registry module war...
Deploying application...
[java] [java] Failed at "Could not get DeploymentManager".
[java] [java] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
[java] [java] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
The above 'admin' username and password is populated by default in the installation screens.
I have tried changing to 'system' but again it gives the same error.
Any advices on this....
Thanks,
Anuj

HI Einstein,
We'll take this offline as discussed.
Thanks
Dan Hynes

Error while installing SMP-3.0 in windows 8.1

Hi,
I am trying to install SMP 3.0 server in windows 8.1.I am getting below erroe while installaing.
Installation failed 'SC' is not recognized as an internal or external command,operable program or batch file.
Kindly please help me to reolve the error.Please find attachment to find installation log.

Hi Sandeep,
I remember once i faced the similar error while installation of smp 3.0 on Windows 8.1. Please check Problem installing SMP EBF 22701 3.0 SP03 , I have shared the workaround that worked for me.
Rgrds
JK

An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PM

Hi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

I have CS2 and would like to do Image Stacking. I understand CS3 allows this. correct? Am I wiser to purchase CS3 upgrade. Am I going to run into issues with install?

I have CS2 and would like to do Image Stacking. I understand CS3 allows this. correct? Am I wiser to purchase CS3 upgrade. Am I going to run into issues with install?

Well, I refuse to sign up to pay Adobe a monthly tribute for life too, but that doesn't mean we are limited to CS3.
I'm staying with CS6.
Adobe still sells a perpetual-license to Photoshop CS6 without the subscription model, but it's $700 for the Standard version and a cool $1,000 for the Extended version.
You haven't mentioned your platform, Macintosh or Windows, so make sure CS3 or any other obsolete version you buy actually runs on a modern operating system.
Good luck.

Issues after installing Classic on OS 10.4

Background and System
I have a Power Mac G3 350Mhz Rev 2 Blue and White, 512MB, 40GB, DVD ROM
running 10.4.9 installed from Retail DVD. Firmware up to date. 2x 20 GB partitions formatted as Extended
Prior to this issue OS X has been running well.
Issue:
After installing OS 9.2.1 to second partition OS X will now not boot up from DVD nor it's partition
Solutions tried:
I wanted to install a Classic environment so used a Retail OS 9.2.1 Bootable CD and did a full install to the second partition.
After the install finished and the system restarted, set on the OS X (Partition1) for start up the system hangs right after the Apple "Chime". with no signal to video card
Attempted to then boot from OS 10.4 DVD but this does not get detected when holding "c" down for boot up from CD option. This worked perfectly before.
Have run OS 9.2.1 Disk Aid Verify and both partitions are ok. The system will boot from the 9.2.1 CD and partition but anything to do OS X now will not work. I also tried an Ubuntu 6.06 Live CD but this will not now boot either.
Checked firmware and tried to re run firmware update and this advised my firmware was up to date.
Any other suggestions?
Thanks

The only thing I can think of is that when you installed the 10.4.9 OS you didn't option to install OS 9 drivers.

Having issues after installing Essbase V9.3.1,configuring the SQL interface

I am having issues after installing Essbase V9.3.1 and configuring the SQL interface. we are using UNIX/AIX box for our Essbase server and UDB DB2 9.1 SP6 as our SQL Interface.
When tried to run an ESSCMD script to perform BUILDDIM operation on Essbase application using the load rule (with the SQL interface), got the error as recorded in the application log file and is attached at the bottom and the .odbc.ini file on the server looks as follows.
Can somebody tell me whether .odbc.ini needs any correction or what else should I do to correct the issue and able to work thru using SQL interface? Appreciate any help provided in this regard. Thanks,
.odbc.ini
[ODBC Data Sources]
DOLU003=IBM DB2 ODBC DRIVER
[DOLU003]
Driver=/home/db2inst1/sqllib/lib/libdb2.a
Database=DOLU003
[ODBC]
Trace=0
TraceFile=odbctrace.out
InstallDir=/home/db2inst1/sqllib/odbclib
[Mon Apr 20 15:16:29 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1013091)
Received Command [SQLRetrieve] from user [Olapadm]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021004)
Connection String is generated
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021041)
Connection String is [DSN=DOLU003;UID=...;PWD=...]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021006)
SELECT Statement [SELECT * FROM DB2OLADM.BD_DIMENSION_DEF_PC WHERE DIMENSION_ID
= 12 ORDER BY TREE_NODE_NUM, PARENT_NODE, CHILD_NODE] is generated
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021013)
ODBC Layer Error: [7] ==> [[DataDirect][ODBC 20101 driver]6013]
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
--------------------------------------------------------------------------------------------------------------------------------------------

I had similar errors when first setting up the SQL interface. Are you on a 64 bit operating system on the essbase server? If so Essbase needs to use the 32 bit odbc driver, not the default 64 bit driver.
The 32 bit driver is still available here SysWOW64\odbcad32.exe <-----This is the 32 bit (Use)
The Administrative tools by default uses system32\odbcad32.exe <----This is the 64 bit (Don't Use)
Once I opened the 32 bit driver interface directly and set it up the errors went away.

HELP Installing the Flex SDK?????Step #4

I am using windows vista (32) and I just downloaded and
installed the newest jdk to program files.
Now, I have no clue how to define java_home/bin directory in
the system path. *Install the Flex SDK - Step #4
Can someone give me step by step details how to this? I've
never used Java or Flex.

Right now (automatically, without tampering with anything),
the system variable I have is:
Variable: Path
Value:
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program
Files\Common Files\Adobe\AGL;C:\Program Files\QuickTime\QTSystem\
The instructions I am using are at:
http://www.adobe.com/support/documentation/en/flex/3/releasenotes_flex3_sdk.html#installat ion
I need to get this right, fast, without screwing up my
system. I am nervous about that.
Please continue to support me on Step #4

How do I install Adobe Air SDK for CS5.5 Products?

Hey how would I install Adobe Air SDK 3.7 for Flash Pro CS5.5 and Flash Builder 4.6?

Okay this is what I got from the .XML file:
<?xml version ="1.0" encoding="utf-8" ?><application xmlns="Untitled-11.0Untitled-1http://ns.adobe.com/air/application/3.7"><id>Untitled-1</id><versio nNumber>1.0</versionNumber><filename>Untitled-1</filename><description></description><name>Untitled-1</name><copyright></copyright><initialWindow><content>Untitled-1.swf</conte nt><systemChrome>standard</systemChrome><transparent>false</transparent><visible>true</vis ible><fullScreen>false</fullScreen><aspectRatio>portrait</aspectRatio><renderMode>auto</re nderMode></initialWindow><icon></icon><customUpdateUI>false</customUpdateUI><allowBrowserI nvocation>false</allowBrowserInvocation></application>

Installing Java 2 SDK 1.4.1

I am planning on installing Java 2 SDK 1.4.1 on my computer under Windows Me. I have noticed in my Add/Remove Programs that I have a Java Plug-in 1.3.1_02 installed on my computer. I believe it comes as part of Compuserve which I also have installed on my computer. Does anyone know if that plug-in will cause problems in the installation of Java 2 SDK 1.4.1? Is it alright to leave the Java Plug-in there or does it need to be uninstalled before I install Java 2 SDK 1.4.1. I would appreciate any help. Thanks.

...but than again I'm using Linux and I know where all my files are.

Installing Java 2 SDK, SE v1.4.2_07

I'm trying to install Java 2 SDK, SE v1.4.2_07. During the install I get this message
"Error 1335. The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package."
My OS - XP sp2
I had a previous version of java on here and decided to upgrade. I removed it in add remove programs and when I try to install, I get the message you see above. The only thing I can find online is to reinstall the OS. Can somebody out there help?
-----------------------------------------------------------------------

hi ,
if u got solution share with all plzz

Issue in installing SMP 3 SDK

Similar Messages

Maybe you are looking for