Issue in IT0587 field change

Dear Sir,
Currently in IT0587, we have the standard provision for 20 Characters which inclusive of u201C/u201D , which is also considered as Character. Due to changes proposed by the PF Office the requirement is 26 Characters as per the below we need to fill 26 character for PF a/c number updation.
State      PF office     EST code               EST Sub code     PF No
AP/     PTC/     max. 7 digits/     max. 3 digits/     max. 7 digits
3     4     8               4          7              =26
Present PF no. in SAP     To be updated as
AP/XXXXX/XXXXX     AP/PTC/XXXXXXX/XXX/XXXXXXX
Please let me know how to address this issue.
Kind Regards
Nag

Found the SAP Note in Service Market Place
Regards
Nag

Similar Messages

Workflow - Wait for field change

Hi All,
I am just starting to experiment with sharepoint 2013 (in office365) workflows and am running into an issue.
What I am trying to create is a sort of approval workflow in which multiple people need to approve the item. I created a column for each department that needs to approve the item and the default value for the column is 'awaiting approval'.
So the first department gets an email that they need to approve or deny the item. I want the workflow to wait for the value 'awaiting approval' gets changed and if it changes to deny stop the workflow, else go to the next department.
The problem is that 'wait for field change' does not seem to do the trick. I can tell it to wait for the field to change to approved, but if it is denied it won't go further to the denied state.
I guess there is a trick for this but I can't find it. Any ideas?
Thanks in advance,
Eddy

I'm not sure wait for field change will work. This action requires you to wait until it equals a specific value, rather than just for the field to change. So if you want approve or deny, this won't work because you can only wait for it to be approved or
wait for it to be denied, not both. Basically, just as you say.
I would just have stages ("Awaiting Department 1", "Awaiting Department 2", etc) that is a hidden choice field set by the workflow. Choice fields then for each department for their approval. Conditions on the workflow fire based on the Awaiting Department
field.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

How can I save a field change in an iview

I changed a text field in an iview (ctrl + right click on field in preview mode). There's no possibility of saving this change. In preview mode the field change is visible, though. But in regular mode nothing has changed.
How can I save the change?
Is this possibly a cache issue?
Edited by: J. Weemhoff on Jan 16, 2009 2:30 PM

Hi J. Weemhoff,
Try that.
Imagine the structure inside the Portal Content Role1 --> Page1 --> Iview1 (iView1 = iView you like to change)
1) Open the Role1
2) Inside the Role1, Right mouse button inside the Page1 and chose Edit.
3) Select the iVew1 and chose Open.
4) Click in button PREVIEW
5) Change the field.
6) Click in Buttons APPLY and OK.
Good Luck
Eduardo

Authorization issues MM/PP STATUS   Changes

Hello,
I'm getting the following error even with SAP_ALL SAP_NEW
BDC Transaction Report for ZM02. Report: ZUCC0026
Run by:      KHALIFAO                            page:     1
On:          11/11/2009                          at : 09:06:12
In System:   Q47
Authorization issues MM/PP STATUS               Changes
M365SC1110020      ZFIN M680 MM/PP STATUS 00 Not authorized to change MM/PP status
One of my user is having the following error when she excuted the following steps :
Steps:
SE38/ ZUCC0026   - Material Mass update program for Costing View
Enter the following fields before executions
Material : M365SC1110020
Plant: M680
Check off update material
Field to update: select MM/PP status
New Value: 00
Execute transaction
Thanks
Osama
Expected results: output document should states that update of MM/PP status was changed from XX to 00.
This message

Hello Julius,
SY-UNAME
ZUCC0026                           550   WRITE: / 'BDC Transaction Report for ZM02. Report:'(b01),
                                                 / 'Run by:     '(b02) ,sy-uname COLOR 5,
                                  1167 * IF sy-uname <> 'BATCH'.
                                  1183   READ TABLE itab_zusrgroup WITH KEY group_id = group_id
                                                                            user_name = sy-uname.
                                  1212     SELECT SINGLE update_ind scop_ind
                                               FROM zusrgroup INTO (itab-update_field,l_scop_ind)
                                                      WHERE user_name = sy-uname
                                                      AND   group_id = itab_fields-group_id.
                                  1219 *               WHERE user_name = sy-uname
                                  1223     READ TABLE i_zplant WITH KEY
                                                                  user_name = sy-uname
                                                                  werks = itab-werks.
                                  1422   SELECT werks FROM zusrplant
                                                      INTO zusrplant-werks
                                                      WHERE user_name = sy-uname.
                                  1453     MOVE: sy-uname TO i_zplant-user_name,
Parameter :
188 *PARAMETERS: p_mode TYPE c DEFAULT 'N' NO-DISPLAY.    JHSIR35508-
189 PARAMETERS:      p_field LIKE itab_fields-descriptio.
190 PARAMETERS:      p_name LIKE itab_fields NO-DISPLAY.
191 PARAMETERS:      p_newval(14) TYPE c.
193 PARAMETERS:      p_file(100) TYPE c LOWER CASE.
194 PARAMETERS:      p_filval AS CHECKBOX.                      "0001+
195 PARAMETERS:      p_unix   AS CHECKBOX.                      "0004+
33 PARAMETERS:          P_UPD AS CHECKBOX.
Thanks
Osama

User Exit in VA02 for Warranty Status field change

Hi Gurus,
Can any one pls suggest the user exit that gets trigerred when there is a Warranty Status Field change in the Repair Order of Order type ZRAS and when the change occurs it has to update the work center of the Corresponding Service Order.
Pls help me with this issue.
Regards,
VIJAYB.

Transaction Code - VA02                     Change Sales Order
Enhancement/ Business Add-in            Description
Enhancement
V60F0001                                SD Billing plan (customer enhancement) diff. to billing plan
V46H0001                                SD Customer functions for resource-related billing
V45W0001                                SD Service Management: Forward Contract Data to Item
V45S0004                                Effectivity type in sales order
V45S0003                                MRP-relevance for incomplete configuration
V45S0001                                Update sales document from configuration
V45P0001                                SD customer function for cross-company code sales
V45L0001                                SD component supplier processing (customer enhancements)
V45E0002                                Data transfer in procurement elements (PRreq., assembly)
V45E0001                                Update the purchase order from the sales order
V45A0004                                Copy packing proposal
V45A0003                                Collector for customer function modulpool MV45A
V45A0002                                Predefine sold-to party in sales document
V45A0001                                Determine alternative materials for product selection
SDTRM001                                Reschedule schedule lines without a new ATP check
Business Add-in
BADI_SD_SCH_GETWAGFZ                    Scheduling Agreement: Read WAGFZ from S073
BADI_SD_V46H0001                        SD Customer functions for resource-related billing
No.of Exits:         15
No.of BADis:          2

Delta issue for Customized field in LO Datasource.

Hello,
I have one customized field 'ZCOORNAME' in the DS 2LIS_05_Q0NOTIF. I have changed this field in Tcode- QM02 and checked the changes in TCODE - LBWQ (Extraction Queue) and I got the Changed entry but now when i am trigerring the V3 Job, these changes are not getting populated in RSA7 (Delta Queue).
For standard field changes, it is capturing delta properly, the problem is with only customized fileds..Can anyone put some light on this issue ....
Can you pls le me know when will be the Customer Exit(CMOD) is going to hit ? Before the Delta Queue or After the Delta Queue or is it before the Extraction Queue / After the Extraction Queue ???
BR / PT..

I have one customized field 'ZCOORNAME' in the DS 2LIS_05_Q0NOTIF. I have changed this field in Tcode- QM02 and checked the changes in TCODE - LBWQ (Extraction Queue) and I got the Changed entry but now when i am trigerring the V3 Job, these changes are not getting populated in RSA7 (Delta Queue).
For standard field changes, it is capturing delta properly, the problem is with only customized fileds..Can anyone put some light on this issue ....
Please try activating the datasopurce again and try it.
Can you pls le me know when will be the Customer Exit(CMOD) is going to hit ? Before the Delta Queue or After the Delta Queue or is it before the Extraction Queue / After the Extraction Queue ???
he customer exit is hit before the entries are populated in extraction queue. Actually, when the transaction is done, the changes are written to database table and at the same time into the extraction queue. Just before going to extraction queue, the custom fields get populated in customer exit.

Issue After Rating field is added to the Discussion Board List in SharePoint 2013

Hi ,
We are facing issues After Rating field is added to the Discussion Board List in SharePoint 2013. We are getting below error while adding a new item or editing a new item. Please help on this.
Ashish Kumar Baranwal

Users which were getting issues actually getting below error:
[COMException (0x81020014): One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID,
String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress,
Boolean bMigration, Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +0
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration,
Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +565
[SPException: One or more field types are not installed properly. Go to the list settings page to delete these fields.]
Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) +146
Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bPreserveItemUIVersion, Boolean bUpdateNoVersion, Int32& plID, String&
pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bUnRestrictedUpdateInProgress, Boolean bMigration,
Boolean bPublish, String bstrFileName, ISP2DSafeArrayWriter pListDataValidationCallback, ISP2DSafeArrayWriter pRestrictInsertCallback, ISP2DSafeArrayWriter pUniqueFieldCallback) +2336
Ashish Kumar Baranwal

Report needed: Customer master TAXKD field changes

We are looking to track changes made to TAXKD (tax code) in customer master.   Is there any report we could generate weekly that would detail changes made to the field.
Also, we'd like what change was made. (i.e. customer number, date, field changed from 0 to 2)
Thanks,
Michelle

Hi Michelle,,
Those changes will be recorded in the CDHDR and CDPOS tables with your field name based on the dates..
and also with the Old value and the New value
from the CDPOS
pass
OBJECTCLAS = 'DEBI'.
OBJECTID      = Your document number "optional
TABNAME    = 'KNV1.
FNAME       =   'TAXKD'.
if you pass these thins you will get the in the fileds VALUE_NEW and VALUE_OLD
hope these informatino useful to you.
Thanks
Edited by: Prasanth on Apr 13, 2009 7:40 PM

Issue with Custom Field updation through BAPI FM

Hi All,
I am going to update some custom filelds in BUt050. So for these custom fields, I want to fill buffer memory so that I can track the changes through buffer. So I was calling FM BAPI_BUPR_CONTP_CHANGE and passing following parameters.
          businesspartner = < bp number>
          contactperson   = < Contact Number>
          validfromdate   = '00010101'
          validuntildate = '99991231'
          centraldata     = blank
          centraldata_x   = blank
I am keeping central data blank as there is no standard field to update.
But it is returning me a message that no changes are made.
can any one has any idea how can I send custom field change in buffer?

As my goal is to update custom fields in BUt050 from WEB UI, I was planning to fill the memory buffer with the changed values by calling FM ''BUB_BUPR_MEMORY_FILL'.
So I have to get memory first. But if I dont call the FM 'BAPI_BUPR_CONTP_CHANGE', then the memory will not be filled.
That is the reason to call the function module.

Custom field in Vendor Master - track field changes

Hi Experts,
I have a requirement to enhance vendor master (XK01) by adding custom fields. I did this, but now the customer needs to track changes made to this field. He expects to see the changes made to this custom field using menu path 'Environment -> Field Changes' from vendor master transactions (XK01, XK02, XK03). I have enabled the track changes in the data element, so that field changes can be tracked in CDPOS, but that is not enough. Please help to find solution. Thanks.
Regards
Arun

Hi Brad,
I added the new fields to vendor master using the SPRO option:
'Prepare Modification-Free enhancement of Vendor Master Record' in the following path:
Logistics-General -> Business Partner -> Vendors -> Control -> Adoption of customer's own master data fields. This created a button on vendor master, and my field is in a pop up box which is generated on click of this button.
This field is stored in LFM2 table.
I have enabled the change flag in the data element of the custom field, and it is showning the field changes in CDPOS table.
But the problem I face is how I can avoid going to the CDPOS table and instead use the menu option :
'Environment -> Field Changes'
Regards
Arun

Why are the fonts in the fillable fields changing in reader?

Hello, I created a fillable pdf in acrobat. When I open the pdf in reader on my iPad the fonts in the fillable fields change. It is throwing off the fields and things don't line up correctly. I can't figure out how to correct the problem or why it's happening in the first place. Also, the fields behave differently in preview on my Mac. The fonts are correct but the placement is off. Any help would be awesome! Thanks.

Solved it! I went back into acrobat and locked the appearance of all my text fields. Everything now appears as it should in reader. Still have no idea why I needed to do that?

Sum after field change

Does any one know how to sum a column upon the field change of another column? For instance; a construction estimate is dividedinto, say 50 divisions (categories). Each entry into my general ledger, a numbers spread sheet, has a column for, Job, and division. To bill a job I would filter by job name, then sort the division column, accending. I would then right click, and sum after field change. In this way I would have the sum of each divisions costs to date, and compare it with the original estimate. The new numbers update does not seem to have this feature, (sum after field change). Does anyone know how to accomplish this, perhaps with sum if?

Numbers seems to perform calculations when any dependencies are changed. so entering a new number should cause a sum to update.
try this as an experiment:
in a small table make the last row a footer row then in footer of column A enter the formula:
=sum(A)
like this:
now enter values in the column:

Which field changes will bring the delta into BW

Hi,
On which field changes the delta will bring data into SAP BW. let us say if you bring the data from 2LIS_13_VDITM, any key figure changes in VF02 will bring the data? Only few characterstic changes it will bring the delta data. What and all those characterstics for delta identifies?
Let us say I have added few fields in this extractor from custom table, If I would like to bring the delta for the field changes which lies in custom table, Can I do it by creating custom Business Transaction Events?
advance thank you very much.

Hi SHarsha,
delta update implemented using the characteristic 0RECORDMODE, it describes records to be updated or added.
Alex

Field changes on Contract Account change(CAA2).

Hi guys,
I am using BDT to add an checkbox on the Contract Account -> General Data ->
Account management data, and I want to save the change log of this field (checkbox), so after the user changed it, the user can see the change logs by clicking Extras->Field changes on the menu.
Thx in advance, points will be rewarded.
Vincent.

you can control break statement is of at new and print that description what ever you want and end with endat.
thanking you

Field changes in J1ID

hii,
I have an requirement to track the field changes for customer excise in J1ID transaction . can anyone tell me in which table the changes are logged. I have debugged the standard report and check the table DBTABLOG. but I am not able to get the proper data into the table as which fields are changed and wht is the new and old value.
Regards,
Anil N.

hello,
Changes are logged in database as follows
1) CDHDR Header Data,
2) CDPOS Item Data
regards
suresh nair

Issue in IT0587 field change

Similar Messages

Maybe you are looking for