Issue in Lion re Graphics Not Showing in html Email Signature

After I upgraded to Lion, I created an html signature with the graphics portion residing on Dropbox, and it worked without a hitch until about 10 days ago.  Then a question mark in a blue square started appearing sporadically in place of the graphic. Now, in place of the graphic, I'm getting that question mark in a blue square 100% of the time in place of the graphic on Dropbox.  The .webarchive file in my -/Library . . .  mail/signatures folder that no longer reveals the graphic in my emails, however, works fine when opened up in Safari.  I've tried rewriting the code, but it's of no avail.  The files open up beautifully in Safari with the graphic, but in the signature box in Preferences and in the emails themselves, it's that blue box that keeps showing up.  Does anyone have any idea why I'm not able to access my graphic from mac mail and how I can fix the problem?
Thank you very much in advance for your assistance.

As of two days ago, I am having basically the same problem as described:
imap account on my University, it always synced just fine with my iphone. Two days ago it stopped pulling new messages from the server, and moreover, it also does not show the recent ones it showed already, but only shows me approx. 100 really old messages (6 month old).
Whenever I sync, it pretends to do it (sync date gets updates), but it does not fetch the messages.
On my desktop and on my ipad2 (EXACT SAME SETTINGS), everything is ok, messages are pulled from the server (just as it was ok on my iphone two days ago, and I did not change anything).
When I go to the desktop, and move a new message (one this is not showin up on my iphone) to a subfolder of inbox or to the trash folder, then I suddenly can see this message also in the subfolder or in the trash on my iphone.
I have deleted the account and set it up anew, same result: the same 6 month old messages get uploaded, and that's it. I can delete also these old messages, and then they are gone, but also this does not pull up any additional messages.
Any ideas?
Oliver

Similar Messages

  • My old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

    my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

    Hello gpbondi,
    The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
    Download past purchases
    http://support.apple.com/kb/HT2519
    Cheers,
    Allen

  • Os x lion mail does not save icloud sent email with attachment

    os x lion mail does not save icloud sent email with attachment... are there people who experience the same problem? i was with Apple Support via chat and he could not resolve the problem. I was given a phone number to call, i assume it's tech support for OS X or Mail but I did not have time to be on the phone for a long time... thank you

    I finally fixed it! I verified and repaired disk permissions on my Mac... how come the Apple Tech Guy didn't know that???!!!! Shocking

  • Mountain Lion: MacBook Pro NOT showing as a shared device on iMac.

    I am running Mountain Lion on my iMac and MacBook Pro, for whatever reason the MBP does not show up as a "shared" device on the iMac, but the iMac shows as shared device on the MBP, I have ALL of the proper "file sharing" settings mirrored on both, also when I try to connect via Go>>Connect to Server on the iMac, the MBP is not even visible nor will it connect to afp://i.p address. Any insight as to what could be causing this, or how to resolve it? Please help!!

    Hi fbratchett,
    If you are having issues file sharing from your MBP to your iMac, you may find the following article helpful:
    Apple Support: File Sharing
    http://support.apple.com/kb/HT1549
    Regards,
    - Brenden

  • Movie rentals that I downloaded onto iMac with Lion to do not show up on ATV 2 in menu for computers.  Purchased movies show up just fine.  What to do or look for?

    I have an imac that is running lion and an Apple TV generation 2.  I have rented a movie from itunes and it shows up on my imac in Itunes under a rental icon, and will play fine on my computer.  However, it does not show up as choice to play on my apple tv.  I have homesharing enabled and everything else works fine including purchased movies that are on my imac, but no where does it show rental movies. 
    What do I look for?  What do I do to play the rental movie on my apple tv 2?

    Answer to my own question:
    Wait until the downloaded rental has completed its download to the imac.  This took a long time for me, since it was part of several things that I was downloading at the same time.
    Finally, it showed up on my apple tv.   Interestingly, I was able to watch much of the movie on my iMac before the movie finished its download and was available to the ATV 2.

  • Lion Automator - Photoshop not showing up in applications list

    I am brand new to the Mac world and trying desperately to figure out everything.
    I have searched high and low for some sort of help/tutorial/google search on Automator and am coming up empty.
    I am running Lion on a brand new MacBook Pro along with Photoshop CS5 v. 12.1.  I have installed Photoshop Automator 5.0 as well.
    When I open Automator, in the libraries under application view mode, Photoshop is not showing in the list.  The Photoshop Automator actions do show in the main library list in Automator, however, the association icon is a gray X.
    How do I get Photoshop to show as an application?  I can't even get Automator to open Photoshop.
    I am praying that you will be able to help me.  Please let me know what additional information you need in order to help.
    Thanks in advance!
    Lisas

    OPPS....IT does say stuff....here is a list of all the stuff it says as it starts:
    8/9/11 6:45:29.651 PM Automator: The action “Add Movie to iDVD Menu” could not be loaded because the application “iDVD” was not found.
    8/9/11 6:45:29.655 PM Automator: The action “Apple Versioning Tool” could not be loaded because the file “/usr/bin/agvtool” was not found.
    8/9/11 6:45:29.656 PM Automator: The action “Apply SQL” could not be loaded because the application “Xcode” was not found.
    8/9/11 6:45:29.658 PM Automator: The action “Build Xcode Project” could not be loaded because the application “Xcode” was not found.
    8/9/11 6:45:29.659 PM Automator: The action “Convert CSV to SQL” could not be loaded because the application “Xcode” was not found.
    8/9/11 6:45:29.660 PM Automator: The action “Create Package” could not be loaded because the application “PackageMaker” was not found.
    8/9/11 6:45:29.660 PM Automator: The action “CVS Add” could not be loaded because the file “/usr/bin/cvs” was not found.
    8/9/11 6:45:29.661 PM Automator: The action “CVS Checkout” could not be loaded because the file “/usr/bin/cvs” was not found.
    8/9/11 6:45:29.661 PM Automator: The action “CVS Commit” could not be loaded because the file “/usr/bin/cvs” was not found.
    8/9/11 6:45:29.661 PM Automator: The action “CVS Update” could not be loaded because the file “/usr/bin/cvs” was not found.
    8/9/11 6:45:29.663 PM Automator: The action “Execute SQL” could not be loaded because the application “Xcode” was not found.
    8/9/11 6:45:29.665 PM Automator: The action “Get iDVD Slideshow Images” could not be loaded because the application “iDVD” was not found.
    8/9/11 6:45:29.667 PM Automator: The action “Initiate Remote Broadcast” could not be loaded because the application “QuickTime Broadcaster” was not found.
    8/9/11 6:45:29.668 PM Automator: The action “New iDVD Menu” could not be loaded because the application “iDVD” was not found.
    8/9/11 6:45:29.669 PM Automator: The action “New iDVD Movie Sequence” could not be loaded because the application “iDVD” was not found.
    8/9/11 6:45:29.669 PM Automator: The action “New iDVD Slideshow” could not be loaded because the application “iDVD” was not found.
    8/9/11 6:45:29.670 PM Automator: The action “New QuickTime Slideshow” could not be loaded because the application “QuickTime Player” was not found.
    8/9/11 6:45:29.671 PM Automator: The action “Open Keynote Presentations” could not be loaded because the application “Keynote” was not found.
    8/9/11 6:45:29.673 PM Automator: The action “Print Keynote Presentation” could not be loaded because the application “Keynote” was not found.
    8/9/11 6:45:29.675 PM Automator: The action “Set iDVD Background Image” could not be loaded because the application “iDVD” was not found.
    8/9/11 6:45:29.675 PM Automator: The action “Set iDVD Button Face” could not be loaded because the application “iDVD” was not found.
    8/9/11 6:45:29.676 PM Automator: The action “Set Movie Annotations” could not be loaded because the application “QuickTime Player” was not found.
    8/9/11 6:45:29.676 PM Automator: The action “Set Movie Playback Properties” could not be loaded because the application “QuickTime Player” was not found.
    8/9/11 6:45:29.677 PM Automator: The action “Set Movie URL” could not be loaded because the application “QuickTime Player” was not found.
    8/9/11 6:45:29.677 PM Automator: The action “Show Main iDVD Menu” could not be loaded because the application “iDVD” was not found.
    8/9/11 6:45:29.678 PM Automator: The action “Show Next Keynote Slide” could not be loaded because the application “Keynote” was not found.
    8/9/11 6:45:29.678 PM Automator: The action “Show Previous Keynote Slide” could not be loaded because the application “Keynote” was not found.
    8/9/11 6:45:29.679 PM Automator: The action “Show Specified Keynote Slide” could not be loaded because the application “Keynote” was not found.
    8/9/11 6:45:29.679 PM Automator: The action “Start Keynote Slideshow” could not be loaded because the application “Keynote” was not found.
    8/9/11 6:45:29.680 PM Automator: The action “Stop Keynote Slideshow” could not be loaded because the application “Keynote” was not found.
    Buy I see NOTHING about Photoshop????
    Kirk

  • Why are line graphics not showing up in Preview Mode when they show in Normal view mode?

    I am using CS4, I've used InDesign for 4 years. I can not figure out why this is happening...
    From the Tools panel, I am using the line and circle tools. Drawing lines (arrows) and circles on my document, with a stroke weight of 1. The lines are the top item on my page, the last thing I draw. I draw lines that would go over not only other graphics, but over text as well.
    Problem is that they only show up in Normal view, not Preview view. Hence, I don't think they will show up on the final document.
    I've used these tools often, and the lines not showing is a new problem. Can anyone shed some light on why this might be happening?
    Thanks, Louise

    I looked and yes "nonprinting" was ticked in the Attributes panel.  THANK YOU :-) 
    I knew there had to be a simple solution and I was so frustrated it was eluding me.
    Thanks again.

  • Mountain Lion, photos are not showing up in photo stream

    I recently installed Mountain Lion, now photos are not showing up in photo stream on the computer.  What should I do?

    Disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. That should jump start Photo Stream. 
    OT

  • Images and graphics are not showing in certain emails when using Firefox. They show in Google Chrome.

    Certain emails from f.chtah.com(image info) are not showing graphic or image content. This happens in both gmail and hotmail. If opened in Google Chrome, they show up.
    I had my computer wiped clean last week and everything was showing up ok again until this morning. The same emails are having the problem that was going on for the previous month.
    I make sure that all updates are installed.

    I figured it out. Clear your cookies. The company that hosts the images and the stylesheets updated their domain name- i figured this out in Chrome, it was showing a different URL for the css- http://ebm.cheetahmail.com
    After all the cookies (Privacy Tab in preferences) and reloading the pages the images and stylesheets started working again.
    I hope this helps other folks.

  • Podcast graphic not showing Iweb rss not the same as Technotes

    I noticed that the graphic for my podcasts are not showing in itunes. Pinged and changed them to 300*300 jpg.and changed name of file and you can get to the file from the url. Week later still no change but text updates ok. Just have the generic file. Also the categories in Iweb are out of date so need to use a find and replace to fix them al the time.
    Anyone else got the same problem?
    http://www.australianmac.com

    iTunes is having a problem at the moment with cover art
    http://discussions.apple.com/ann.jspa?annID=408
    so don't worry too much about that.
    Make sure your rss feed is all ok by going here http://www.feedvalidator.org/
    and putting in your fee which is
    http://web.mac.com/yournameondotmac/iWeb/(yoursitename)/(yoursitename)Podcast/(yoursitename)Podcast.html
    Fill in all the(yoursitename) with your sitename like jeffrobinson.
    Now yours may be different but you can see the path by going to your .mac in the finder and looking in the Web folder, then the sites folder, then the iWeb folder, and there is your site name on the enclosed folder. Remember that any spaces in a name are %20 in the url. Clear as mud eh?
    The other way is to look at your iWeb site in iWeb, find your podcast page on the left and the first main page of your podcast is the rss feed you need to validate so surf to it in safari and copy the url and put it in the validator above. Look at the results and tell me what they are or just send me the url here and Ill have a look for you. OK?
    Dave
    http://www.australianmac.com

  • Successfully downloaded os x lion, but does not show as installed

    Bought and successively downloaded os x lion on my Mac, but does not show as installed

    That's one of the confusing things about the App store.  The app you purchase there is the Installer.
    If you've successfully run the installer then your Mac is on Lion but the last step of the install proceedure deletes the Installer from your apps directory.  The App store then reflects that the Installer is not installed on the system..  which is true.
    You can redownload the installer from the app store if needed.  If the installer is still in the Apps directory then you probably haven't installed Lion yet, just downloaded it.
    Regards,
    Captfred

  • After reinstalling Lion, iTunes does not show my IMAP mail-accounts in iTunes for sync. How can i fix this?

    i did a clean install of Lion. Than i copied my iTunes Library back from a backup. I configured all my email accounts in Mail. Than i wanted to sync my iPhone. I reconnected it to my iTunes Account and everything was correctly synced, but the email accounts. they do not show up in itunes. On the info-tab of the connected iPhone the part for the email-accounts stays empty. iCal and Adressbook are working fine. What the heck is going wrong?
    And please don't tell me to configure the email-accounts manually in the iPhone. I know that this is a workaround, but it is not the solution for the problem.
    Thanks for helping me out!

    http://support.apple.com/kb/TS1538

  • Smartshapes not showing in html 5 output

    I generated a html5 output from captivate 6. Some of the smart shapes are not showing in the output. They are however visible in the swf output. Why could this be?
    In addition the effects added to the smart shapes do not occur.

    There were quite a lot of issues with shapes in HTML output in CP6. Sorry, but doubt a little bit that you'll find a workaround. Cannot you use images instead of shapes?

  • Applet not showing in HTML!

    Hi all,
    For some reason my generated HTML page will not show the applet it is meant to load.
    The same HTML file loads simply in the appletViwer though and also in Net Beans!
    Any ideas what I can do?
    Heres my HTML code, is there something wrong with it?
    <html><head><TITLE>Applet HTML Page</TITLE></head><body><h1>crossword v1.1</h1><H3><HR WIDTH="100%">Applet HTML Page<HR WIDTH="100%"></H3>
    <p>
    <applet code= "crossword4.class" width=500 height=550>
    <param name = "one" value = "Erroneous">
    <param name = "two" value = "Sightseeing">
    <param name = "three" value = "Ambivalence">
    <param name = "four" value = "Laborious">
    <param name = "five" value = "Secateurs">
    <param name = "six" value = "Wonderful">
    <param name = "seven" value = "Elf">
    <param name = "eight" value = "Inflect">
    <param name = "nine" value = "Reeks">
    <param name = "ten" value = "Note">
    <param name = "eleven" value = "Encum">
    <param name = "twelve" value = "Ocean">
    <param name = "thirteen" value = " ">
    <param name = "fourteen" value = " ">
    <param name = "fifteen" value = " ">
    <param name = "sixteen" value = " ">
    <param name = "seventeen" value = " ">
    <param name = "eighteen" value = " ">
    <param name = "nineteen" value = " ">
    <param name = "twenty" value = " ">
    <param name = "twentyone" value = " ">
    <param name = "twentytwo" value = " ">
    <param name = "twentythree" value = "Ectopic">
    <param name = "twentyfour" value = " ">
    <param name = "twentyfive" value = " ">
    <param name = "twentysix" value = " ">
    <param name = "twentyseven" value = "Containing error (9)">
    <param name = "twentyeight" value = "Needing or showing much effort (9)">
    <param name = "twentynine" value = "Change the pitch of a voice in speaking (7)">
    <param name = "thirty" value = "_____ber, to be a burden to (5)">
    <param name = "thirtyone" value = " ">
    <param name = "thirtytwo" value = " ">
    <param name = "thirtythree" value = " ">
    <param name = "thirtyfour" value = " ">
    <param name = "thirtyfive" value = " ">
    <param name = "thirtysix" value = " ">
    <param name = "thirtyseven" value = " ">
    <param name = "thirtyeight" value = "Away from its normal position (7)">
    <param name = "thirtynine" value = "Visiting places of interest (11)">
    <param name = "fourty" value = "Having conflicted attitudes or feelings toward something (11)">
    <param name = "fourtyone" value = "Clippers for pruning plants (9)">
    <param name = "fourtytwo" value = "Extremely good or remarkable (9)">
    <param name = "fourtythree" value = "Tiny being in the form of a human, usually full of mischief (3)">
    <param name = "fourtyfour" value = "Smells strongly (5)">
    <param name = "fourtyfive" value = "Brief written record of something (4)">
    <param name = "fourtysix" value = "Large expanse of sea (5)">
    <param name = "fourtyseven" value = " ">
    <param name = "fourtyeight" value = " ">
    <param name = "fourtynine" value = " ">
    <param name = "fifty" value = " ">
    <param name = "fiftyone" value = " ">
    <param name = "fiftytwo" value = " ">
    </applet></p><HR WIDTH="100%">The source.</body></html>

    I think it crashes because one of your parameters is wrong.
    Without the applet and or a full trace I don't know.
    To turn the full trace on (windows) you can start the java console, to be found here:
    C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
    In the advanced tab you can fill in something for runtime parameters fill in this:
    -Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
    if you cannot start the java console check here:
    C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
    I think for linux this is somewhere in youruserdir/java (hidden directory)
    add or change the following line:
    javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
    for 1.5:
    deployment.javapi.jre.1.5.0.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
    The trace is here:
    C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
    I think for linux this is somewhere in youruserdir/java (hidden directory)

  • Reading pane not showing up in email on ipad

    The reading pane of my email is not showing up on my iPad how do I fix it?

    Try a reset:
    1. Hold the Sleep and Home button down (together) for about 10 seconds
    2. Until you see the Apple logo (very important)

Maybe you are looking for

  • HT5097 How do I find my files after a TC restore using Migration Assistant?

    How do I find my TC backup? My difficulties started with my MacBook Pro going totally dead.  Took it to the Apple Store, where they identified a problem with the RAM.  They fixed it, and also reinstalled Lion, but without my applications - Pages, iPh

  • Amount and Quantity field during MIR7

    Hello Experts, My client wants to keep Amount and Quantity field in display mode for particular user during parking of Invoice(MIR7) Is there any way to achieve this. Thanks and Regards Gyanesh

  • CV02N - Check out documents??

    Hi all, i need the following functionality: I have one template document which should be uploaded to the SAP system via transaction CV01N. I check in the document. Other users want to change this document but the check out (pencil) downloads the file

  • JTree, strange problem

    I created a JTree on top of a DefaultMutatableTreeNode by using the constructor JTree(TreeNode root) I tried removing all leaf nodes of the model, using node.removeFromParent(). And unsurprisingly the UI is automatically updated. After that, i reinse

  • Very very urgent. population data from database into dropdownbox

    Hi, i imported a model through ejbs this is to create new entries into database , and my scenerio iso now i need to populate the values that i stored into database thro EJBS in a drop down box of wd application. plz help me through code ,i am new to