Issue in loading master data in BI 7.0

Hi,
I fail to understand how to load master data in BI 7.0. Can you please fill in the steps.
1. Created an Infoarea.
2. Created 2 infoobject catalogs ( for char and kf)
3. Created characteristics like empname and month and salary as KF.
4. For empname, attached the attributes dept and address (master data).
Now what steps should I follow to load master data of all employees and what should be my flat file format ?
thanks

RSA1 - D Cclick on FlatFile Source System - RClick on the App Comp - Create Datasource of type - Master Data Attributes - Enter the required - Read the File in Extraction Tab - Field Tab - Add Infoobjects already Created under Infoobject Column - Check the Preview to see it shows data fine - Activate the datasource
Create Transformation btn Datasource and Infobject - Activate it
Create Infopackage on Master Attr Datsource - Run it
Create DTP - Run it to load from PSA to IO

Similar Messages

Issue while loading master data from BI7 to BPC

Dear Experts,
I'm trying to load master data from BI7 to BPC NW using scenario 2 mentioned in the below document.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
My requirement is need to load 0GL_ACCOUNT attribute and text data from BI7 system to BPC.
1.As mentioned in the How to...doc I had created a dimension called GL_ACCOUNT using BPC Admin client .
2.Able to see GL_ACCOUNT in RSA1, when I try to create a Transformation(step 17 , page-40) to load Attribute data I could not find source of transformation object as 0GL_ACCOUNT(which exist in BI7) . I could only able to see only dimensions available in BPC system when I click F4 in Name.
What could be the reason to not getting BI infoobject as source in BPC?
Thanks in advance...
regards,
Raju

Dear Gurus,
My issue got resolved. So far I'm trying to pull data from R/3>BW>BPC. In the existing land scape BW and BPC are 2 different boxes. That is the reason I couldn't able to see BW objects into BPC (since 2 are different boxes). To resolve the issue I have created a new infoobect (RSD1) in BPC and data loading is from R/3>BPC infoobject(which is created through RSD1)>BPC Dimension.
Thanks and regards,
Raju

Issue while loading Master Data through Process Chain in Production

Hi All,
We are getting an error in Process chain while loading Master Data
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
Regards
Bhanumathi

Hi
This problem is not related to Process chain..
u can try this..
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
(from JituK)
Hope it helps
Darshan

Issue while loading master data from BI to BPC

Dear All,
I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's in BI. Out of 1300,only 1270 ID's are loaded in BPC.
I haven't restrict any ID's using conversion file as well.
What could be the reason? How can I overcome this and load all member's ID in BPC?
Thanks & Regards,
Ramesh.

Ramesh,
Whats the write mode you have chosen for the CPMB/IMPORT_IOBJ_MASTER chain ?
Check if you have the Update mode ..
Hope this helps...

Issues with loading master data and hierarchy from BI InfoObject

Hi,
I was successful with loading the master data from BI InfoObject. It copies the text node as well but it discards the space I have in the technical name when it copies it to BPC. For example if my Text Node technical ID is "NODE 1" it copies it as "NODE1" on BPC side because of which my hierarchy load fails as it is not able to find "NODE 1".
What is the reason it deletes the space from technical ID? and how can I resolve this issue?
Do we have a provision to write a ABAP exit where I can check?
(PS: If i manuallay enter space on my BPC dimension the hierarchy loads successfully)
Thanks in advance,
Diksha.

Hi,
You can check this in start routine which can be called from Transformation file using BADI.
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/28/b66863b41f47589b9943f80b63def6/content.htm
Hope this helps...
regards,
Raju

FM RSNDI_MD_ATTRIBUTES_UPDATE issue to load Master data

Hi Friends,
Could you please let me understand the functionality of the FM RSNDI_MD_ATTRIBUTES_UPDATE.
We have an InfoObject which has some 10 attributes, now we are enhancing it adding 4 attributes more.
This InfoObject is loaded from Enterprise protal and the RFC which was created to load the InfoObject has the above mentioned FM.
For which the InfoObject is the importing parameter.
Now the issue is after addition of the new attributes to the InfoObject whenever we try to change the master data from EP,
the data related to this IO's new attributes is getting cleared off.
Now my question is that whether this FM will clear the data of all attributes of IO before loading it with new data.
Note: The data to the new attributes are coming from different source which is getting deleted.
Can anyone explain in detail what this FM exactly does.
Thanks & Regards,
Vishnu

This FM is usefull to change values of attributes.
I_IOBJNM = name of your characteristic
I_T_ATTRIBUTES = name of your characteristic
I_T_DATA-->
RECORD_NO = is use to identify the row.
IOBJNM = characteristic name
VALUE = characteritic value
IOBJNM = attribute name
VALUE = attribute value value
Example
RECORD_NO     IOBJNM     VALUE
0     0MATERIAL     1000
0     0COLOR     3
0     0WIDTH     100
1     0MATERIAL     1001
1     0COLOR     3
1     0WIDTH     50
if you do not write an attribute that should not eliminate the value that is written

Langauage issue -when loading master data text

I have a customer master data attribute and text .
This is master data is customized one. With in function module based on sy-langu it will extract the English,German,French.... customer data
R/3 side -Rsa3 transaction when i logon each logon language it is extracting the correct information with text values based on the logon language.
When I am loading the data for each language it is not loading.It is updating only the english.
I logged on as french ,German loaded data attribute and text also. Still it is not updating in the master data text values with french ,german.
Infopackage selection also I set DE and French.
Master data Infoobject - Text language dependent is marked also.
Advance thanks

Hello smartone,
I'm facing the same problem right now (only getting EN). So maybe we can share some experience.
On help.sap.com I found the following link:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a659be07211d2acb80000e829fbfe/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a659be07211d2acb80000e829fbfe/frameset.htm</a>
Almost at the bottom of the page there is the description about the language vector. The settings made in this vector control the extracted languages. As a standard all installed languages in the system are marked here.
In the following link describes how to change the settings.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1e6df8bf2a11d2b437006094b9ea64/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/1e6df8bf2a11d2b437006094b9ea64/frameset.htm</a>
But to be honest, I do not know how to get to the parameters. Otherwise I would have tried to check/change them. Does anyone have an idea?
Regards,
Martin

Error while loading master data to attribute ZMAJORGU(Major organisational unit)

Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
    Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
    the attribute/characteristic ZMAJORGU &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
Kiran

Ram
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

Lock NOT set for: Loading master data attributes error

Hi experts,
We were encountering this error before when trying to load master data. When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again. We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE. I have read that it is possible this lock error happens when two change runs happen at the same time.
My question are:
1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
mark
Message was edited by:
Mark Siongco
Message was edited by:
Mark Siongco

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Error while loading Master Data - BPC 10.0 NW

Hello gurus,
I am trying to load master data from a BW InfoObject to a dimension in BPC, but am getting the error as shown below:
The transformation and conversion files are configured as shown below:
I would greatly appreciate if you can help me troubleshoot the issue with the java script command. Thanks in advance for your help.
Best regards,
Vijay

Hello Vijay,
Which Patch are you using for EPM add in.
It seems that js:%external%.replace("#","_") does not work with some patches
so in that case you have to use js:%external%.toString().replace("#","_") in your conversion file.
Deepesh

BI 7.0 - Duplicate Record Error while loading master data

I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.

Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

Error Caller 70" is missing while loading master data

Hi All,
I am facing a Problem while loading master data getting error like "Error Caller 70" is missing" ,there are 4 data packages and in that except one all other with status green .1 data pakage is showing with red color, its update till only PSA .
Please help me out to solving this issue .
Thanks in Advance
Sandhya

Hi,
check the below links
caller 70
Re: Caller 70 error
caller 70
Hope this helps

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

Is it possible to load master data without making object as infoprovider

Hi
Is it possible to load master data or text data without making the infoobject as a data provider in BI7.0.
If yes please tell me the process.
Regards
Tulasi

Hi
YEs you ca do..
1) RIght click on master data in infosources tab and then say DTP -> give Datasource name -> transformations would genetared automatically.
Also this has been discsussed in many forums..search on SDN or let me knw if you are still facing issues.
thanks for points assigned

Issue in loading master data in BI 7.0

Similar Messages

Maybe you are looking for