Issue in master data loading

Dear Experts
when loading hierarchy data from CRM for some of my master data i am facing the below problem.
Everyday i load my master data through process chains for some hierarchies but those changes are not getting displayed
when checked in infopackage monitor its green but when i double click and check the details the overall status is red and underneath that the third one TRANSFER (IDOCS AND TRFC) : is also showing red.
So later if i load manually then everything is becoming green and i am able to see the changes, What could be the possible reason and how can i solve it.
Thanks and regards
Neel

Dear Neel,
Thanks for the info, we have checked the option of activating the hierarchy in the infopackage itself, but even though the load package shouldn't be red in overall status.
Thanks and regards
Neel

Similar Messages

Master data loading issue

Hi gurus,
    Presently i am working on BI 7.0.I have small issue regarding master data loading.
    I have generic data soruce for master data loading.i have to fetch this data to BW side.Always i have to do full data load to the master data object.first time i have scheduled info package and run DTP to load data to master data object, no issues, data got loaded successfully.whenever i run infopacage for second time and run DTP i am getting error saying that duplicated records.
   How can i handle this.
Best Regards
Prasad

Hi Prasad,
Following is happening in your case:
<b>Loading 1st Time:</b>
1. Data loaded to PSA through ipack.It is a full load.
2. data loaded to infoobject through DTP.
<b>Loading 2nd Time:</b>
1. Data is again loaded to PSA. It is a full load.
2. At this point, data in PSA itself is duplicate. So when you are running the DTP, it picks up the data of both the requests that were loaded to PSA. And hence, you are getting the Duplicate record error.
Please clear the PSA after the data is loaded to infoobject.
Assign points if helpful.
Regards,
Tej Trivedi

Regarding master data loading for different source systems

Hi Friends,
I have an issue regarding master data loading.
we have two source systems one is 4.6c and another is ecc 6.0.
First i am loading the master data from 4.6c to bi7.0.
Now this 4.6c is upgraded to ecc6.0.
*In 4.6c and ecc6.0c master data is changing.
After some time there is no 4.6c, only ecc 6.0 is there.
Now if i load master data from ecc6.0 to bi7.0 what will happen.
Is it possible ?
Could you please tell me?
Regards,
ramnaresh.

Hi ramnaresh porana,
Yes, its possible. You can load data from ECC.
Data will not change, may be you may get more fields in datasource at r/3 side, but BW/BI side no change in mappings structures are same. So data also same.
You need to take care of Delta's before and after upgrade.
Hope it Helps
Srini

Master Data Load Issue

Hi Experts,
This is regarding an issue with Master Data "DELTA" load.
WBSe master data has below fields
WBSe
Approval Year
Program definition
Program position
Funding Type
ABCD
2014
ZZPA
Z_ABCD
CB
Program Position master data has below fields
Approval Year
Program definition
Program position
Funding Type
2014
ZZPA
Z_ABCD
DC
WBSe master data table has "look up" for program position to populate "funding type" based on Approval Year,Program Definition and Program Position.
The issue is, daily delta load is not getting "recent/new funding type values".
But, If load the same record with program position selection in FULL Load, the new funding type is getting updated.
Please tell me why "funding Type" is not getting updated with new value in DELTA load.
Thanks
Asha

Hi Asha,
In delta mode only new or changed records are loaded to WBSe MD,
and look up will only pick up data if data is loaded from Data Source to WBSe MD.
There are 2 solutions to this :-
1) change WBSe MD to full load, it will take care, as MD is always over written.
2) Enhance this field in Source system, i.e. Data Source enhacement, if you know the Table for look up in source system.
Thanks and Regards,
Amit.

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta Salpe

Hi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe

Master data load gives dump with exception CX_RSR_X_MESSAGE

Hi all,
I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
We are on SP 12 in BI 7.0.
We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
with regards,
Ashish

Hi,
The log of the dump is given below.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 78
of the (Include) program "LRRMSU13".
Source Code Extract
Line
SourceCde
48
*... Nachricht an den Message-Handler schicken
49
50
*... S-Meldung wenn kein Handler initialisiert
51
DATA: l_type TYPE smesg-msgty,
52
l_zeile TYPE rrx_mesg-zeile.
53
CALL FUNCTION 'MESSAGES_ACTIVE'
54
IMPORTING
55
zeile = l_zeile
56
EXCEPTIONS
57
not_active = 1.
58
IF sy-subrc NE 0.
59
l_type = 'S'.
60
ELSE.
61
l_type = 'W'.
62
ENDIF.
63
64
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
65
EXPORTING
66
i_class = 'BRAIN'
67
i_type = l_type
68
i_number = '299'
69
i_msgv1 = i_program
70
i_msgv2 = i_text.
71
ELSE.
72
DATA: l_text TYPE string,
73
l_repid TYPE syrepid.
74
75
l_repid = i_program.
76
l_text = i_text.
77
>>>>>
RAISE EXCEPTION TYPE cx_rsr_x_message
79
EXPORTING text = l_text
80
program = l_repid.
81
ENDIF.
82
83
ENDFUNCTION.
I went to SM21 and went through the system log. There was a log with the following text ORA-20000: Insufficient privileges#ORA-06512: at
"SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
Thanks Oliver and Oscar, for replying.
regards,
Ashish

Automate Master data loads in BPC7(MS)

I need to update dimension members in SAP BPC7 (MS) from an external source.
The source system for my current project is BW, but if you have done any automated master data loads from any other system or even from a "temp" table please post your solution or tips.
Thanks!
Mez

Hi Mezert,
Would like to chime in with some of the things I've learned about this process over 3-4 years I've spent with BPC/Outlooksoft:
-- Automating maintenance of the dimension/master data might be the biggest single weakness of the BPC solution on the MS platform. It's one of the big reasons that the Netweaver platform basically replaces DTS/SSIS and has more direct linkage to BI/BW cubes and master data (InfoCubes).
-- It is also one a very common issue and in fact, you will have to deal with what the old-timers in BI call "slowly-changing dimensions" at almost every client eventually. For instance, you have a list of proucts/materials that every so often someone adds an item to. ...Well, before you can enter anything for it in BPC, you have to add the dimension member, of course.
-- So far, this challenge has been met by bringing in specialist DTS/SSIS experts in most cases who can employ the special "Custom Tasks" and build one of these packages to run in an automated way to populate the tables inside SQL Server and then execute the Admin MakeDim task to process the cube/application.
-- Usually the development/testing/deployment of these solutions is a non-trivial undertaking. It can be done, but there are peculiar challenges.
-- One example of a challenge is what happens if you need a dimension with > 65,000 members? Well, it can be created and populated by a DTS package, however, when you check the package and the custom task from the old Outlooksoft stuff out, you see that it CLEARS the entire dimension table before re-filling it. ...Yep, it wouldn't allow an "Append" function to run.
-- A second example of a peculiar challenge is that unless you update the Excel Dimension Sheet, you will have to do all the updates in SQL Server Mgmt. Studio and really won't be able to touch the BPC Admin again for that dimension.
Apologies for such a long post, but this is a fairly significant issue and I have to do a lot of research to piece together some of these things. ...If anyone else has something to add as a best-practice, please post.

Bi admin process chains- content master data load has failed

Hi Experts,
i worked with Bi Admin cockpit set-up, all the things are going fine
but Content Master data load (Attribute)has failed and i got the errors like
1)data records for package 1 selected in PSA-2 errors
2)Error 4 in the update
can anyone suggest me how can i sove the issue
regards
Mrudula

Hi
yes, i got 2 errors in Psa
when i click the 1st error i got like
Data record 10023 & with the key
'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_Ptest0001 &' is invalid in value
'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_attribute/characteristic 0TCTBWOBJECT &.
And i it gave the procedure as
if this message appears during a data load, maintain the attribute in the PSA maintenance screens. if this message appears in the master data maintenance screens, leave the transaction and call it again. this allows you to maintain your master data.
And when i click the 2nd error
it has showed the data record as 10024 and remaing explanation is same like 1st one
in this i am not getting, how to proceed the solution.
plz help me anyone
Thanks and regards
Mrudula
Edited by: mrudularajesh on Jul 1, 2009 7:39 AM

Master data loading in BPC NW 7.5

Hi all,
I am trying to load master data from BW into BPC using the packages provided in BPC7.5.
Master data infoobject in Bw is compounded with 3 other objects.2 of them dont have any master data tables.All they have is a text table(T table).
When i run the package i get a warning saying compounded object1 is empty.
i think i am getting the warning because it doesnt have any master data tables(P table,M table and Z table).
In a different case i had a compounded info object but i didnt have any issue because it had master data table to it.This case is diff since no master data tables exists.
Can someone help me on how to approach master data loading in a scenario where compounded objects dont have any master data tables.
Thanks,
Any help is appreciated.
KK.

Hi,
The document is for BPC when they didnt have the new process chains to load master data.Now they have 2 new process chains.One to load master data attributes and texts and the other one to load Hierarchy.And these 2 packages support compounded info objects too.
I was able to load profit center attr/texts/hierarchy into BPC although it was compounded to Controlling Area.This wasnt an issue because Controlling Area had master data defined. meaning it had P table and M table created.
But my issue is for this new master data load i am trying to do the compounded info object doesnt have master data tables.And thats causing an issue.It says Master data table for 0Division is empty.
I want to know if there is any workaround in BPC for this issue.
Any help is appreciated.
Thanks,
KK

Master data Load for Substance Creation : Using BAPI in LSMW ?

Hi ,
Had any one did a Master data load for creating a Substance in SAP RM. If so please let me know the best possible option. I am beeing trying to figure out the option to load Substances and its IDENTIFIER / MATERIAL ASSINGMNET from my legacy system. But I am not geeting a clue to use LSMW. ( Direct or BatchInput )
I am not seeing any BAPI for uploading it through the LSMW except the one BUS1077 ( method SAVEREPMUL ) and I guess this is used along with IDOC.
Appreciate your help and suggestion.
David

Thanks John.
I will try this option what you have suggested. Even I told by business team to look for CG33. But they were been telling me some format issue. Probably they would meant the same what you have said. But they were not aware of work around for this. your information is intresting.
The other option given to me was to create a recording for each and every Tab like Substance header / Identifier / Material assignment etc. seperately. Technically I don't feel good to create in that way. Do you think that is alernate approach.?
With Respect & Regards
David

Master data load for 0COSTCENTER (Cost Center) failing

Hi Experts
I have a master data load for 0COSTCENTER (Cost Center). The Load has started failing from a couple of days at DTP.
(R) Filter Out New Records with the Same Key
(G) Starting Processing...
(R) Dump: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
I am unable to understand the reason for this failure. I tried loading the data 1 costcenter at a time it is still failing so i doubt if its a internal table storage issue as suggested by the dump.
Could you help me on this one please.
Regards
Akshay Chonkar

Thanks All
I have got the issue resolved
The Error Stack for the DTP had accumulated so many entries that it was unable to process further.
So i deleted the entries in Error Stack usin SE14. Then again executed my DTP.
Everything is fine now thanks for your help.
Regards
Akshay Chonkar

Duplicate records during master data loading.

hello guys,
I am reading one blog where the blogger wrote about 'Various issues in a BW Production project'.....I came across one issue which I couldnot understand...
Data loading failed due to Duplicate records during master data loading.......
Why do this error occur?How can we rectify this in a production environment?
Thanks and Regards,
S

Hi SChandx200 ,
May I ask where you get "Various issues in a BW production project"?
Many Thanks,

Problem with Master Data Load

Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022     Re-schedule the master data load process to avoid such situations in future.
u2022     Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
Luis

Dear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2.     Follow instructions from OSS 632931 (tcode RSRV)
3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis

Error in Setting lock for Master Data Load

Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
Bala

Hi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP

Issue in master data loading

Similar Messages

Maybe you are looking for