Issue in Material Master custom tab
Hi Experts,
I have developed a tab in material master using SPRO -> IMG-> Logistics General -> Material Master -> Configuring Material Master -> Define Structure of Data Screens for Each Screen Sequence . Its called Costing3.
While executing mm03 and selecting costing2 and costing3 its showing perfectly. But when i select costing3 alone its showing the below error.
*Maintenance status of field MBEW-ZPLD1 does not correspond to status of screen*
How to correct this? Is i missed anything in SPRO setup?
Any one Kindly help me out.
Mohana
go to OMSA and maintian the status of "costing3"
path SPRO: > Logistic general > material master > field selection > define plant specific field selection and plant specific screen selection
Similar Messages
-
Material master custom validation
hi, friends i have doubt about Material master Custom validation coding .i want some codes...please send me some sample codes...
Hi Krishna,
Tell me your requirement clearly.
refer this thread.This may help you
In material master How to add a new field on Basic data 1 view
Regards
Karthik -
Issue In Material Master Creation.
Hi All,
We are migrating from ECC 5.0 to ECC 6.0.
We have created a Test system in 6.0 which is replica of our existing Production system in 5.0. I have checked relevant config settings everything is ok.
While doing testing we observed following issues:
1.) We are not able to Create Master Data which is Material Master, after entering all relevant information we are getting error: erro Log for the same says:
1.) E MG 144 : The field 'Care Code' is defined as a required field; it does not contain an entry MARA-CARE_CODE
2.) The field 'GI Proc. Time' is defined as a required field; it does not contain an entry MARC-GI_PR_TIME
3.) E MG 144 : The field 'Purchasing Across Purchasing Group' is defined as a required field; it does not contain an entry MARC-MULTIPLE
Please sugest if there is any SAP Note we need to implement for this.
thanks & regards,
Prashant Rathore.Hi Prashant,
the 'required'-state as well as the occurance of a field on a screen
can be customized. You should proceed as follows to resolve the issue:
1. Call transaction OMSR
2. Press the 'Field Name'-Button, enter a field there, for instance
MARA-CARE_CODE, and press enter. This will lead you to the
settings for that field.
3. Now press the button with the green arrow on the right to the field.
By this, yopu reached the screen where field selection can be
maintained, the decision whether the field should be required
is customized.
4. The above list is the list of fields which are customized together,
as a field selection group. The below list defines whether the field
is required. If you dont use that field at all, it should be
sufficient to take care that for no field reference, 'entry required'
is switched on.
5. Now proceed the same for the other fields, which have not been in
the same field selection group.
Regards,
Mauro
Edited by: Mauro Bianchi on Jul 23, 2010 3:44 PM -
FM to read previous period values in material master Accounting tab
hi,
is there an FM to read standard price and price unit values for the previous period in accounting1 tab in material master.
Thanks,
V.Deepthi Suvarna wrote:
Hi ,
>
> Use function module DB_DELETE_TABLE and input table MARHD and delete the entry for the previous period stock.
>
> Thanks
> Deepthi
mardh table is a audit relevant table, it is absolute nonsense to delete enties from standard tables.
The use of this function module is not even a solution for the issue discussed in this thread. -
Archiving issue in material master
Hi
I am trying to delete the material master through SARA t.code
1.enter the archiving object MM_MATNR
2. then click write button enter the varient name(zarc..)click maintain
then enter the materials ...tick the radio button production mode..save the varent
3.then come back click the starttime click time immediatly
4.come back click spool parameters
5. then comeback click deletion button then enter user name
6. then click select archive files..her popupscreen displayed but there are no files.....
i have faced issue thre ..so next step how can i proceed..pls guide me any one...
when i am go to job overview ... my job ststus is finished and cancelled ..it has ahoes both status ...than i goto joblogs..error displas like ...........
Virus scan profile /SARC/ARCHIVING_ADK does not exist
Message no. VSCAN032
Diagnosis
The virus scan profile /SARC/ARCHIVING_ADK was requested, but is not entered in the configuration of the virus scan profiles.
System Response
The virus scan profile cannot be retrieved.
Procedure for System Administration
Check the configuration of the virus scan profiles.
regards
SesidharHI,
ADK-based archiving relies on two main elements, which are used for the development and administration of archiving solutions: Archive Development Kit (ADK) and Archive Administration (transaction SARA).
ADK and SARA are part of the standard SAP Web Application Server. ADK is the Application Programming Interface used by the applications to develop archiving solutions, while Archive Administration (transaction SARA) is used mainly by data archiving administrators to manage all tasks related to data archiving, including job scheduling and management, writing, reading and deletion of data, as well as Customizing.
Pls check the link:http://help.sap.com/erp2005_ehp_03/helpdata/EN/ed/18cc38e6df4741a264bddcd4f98ae2/frameset.htm
This issue is to be solved with the ABAP consultant, dealing with the Web based applicaitions...
Regards
Priyanka.P -
Issue in Material Master data replication in SRM 7.13
Hi All,
We have implemented SRM 7.13 and facing an issue in material mater data delta replication.When we create a new material in ECC it does not get replicated to SRM and gives the ERROR 'Specify the relevant unit of length' and 'Validation error occurred: Module COM_PRODUCT_MAT_VALIDATE, BDoc type PRODUCT_MAT.' in SMW01.
But when changes are done to the same material in ECC it gets repicated without any issues.
Please provide your help to reolve this issue.
Thanks,
AnkurHi Ankur
Check your settings in CUNI transaction which UOM is this happening for or for all ?
You should go to that and check what are the conversion values maintained As seen below
In CUNI transaction go to utlilties > Adjustment select your R/3 system and click on Check mark
Also replicate the UOM from backend . By going to R3AS and fill DNL_CUST_BASIS3 and execute
Lastly go to Table T006 and T006A and click on Check table ...
Doing this would sync your UOM with that of ECC and ideally the error should vanish if not
share the screenshots
You can solve the errors mentioned above by implementing the following notes:
Call transaction SE16, enter SMOFAPPL, and set entry EBP.
Check the notes as below
520227 - Set type CRMM_PR_TAX (implement manually!)
720819 - Consumer entries
428989 - Filtering irrelevant data (for example, Sales and Distribution) Example: see attachment mod.txt.
675101 - Execute report: COM_CATEGORY_TRANSPORT
Note 872533 - FAQ: Middleware
Note 402591 - Download Customizing object DNL_CUST_BASIS3
Note 1609476 - Error loading tables DNL_CUST_PRICE and DNL_CUST_BASIS3 from ERP.
Note 393939 - Table TCURX is not downloaded from R/3 System
Note 1038966 - Entries missing in TCURX after load of DNL_CUST_BASIS3
Also refer to these who faced similar issue as yours
http://scn.sap.com/thread/1769891
http://scn.sap.com/thread/1355188 -
Material Master Accounting tab tables
One of my clients want a report that has values of a material standard price and price unit in group currency that are visible in accounting tab of material master(MM03). i know i can get the company code currency values from MBEW table but in which table are the group currency values stored?If any one can provide me this information that would be great.
Points would be awardedhi Aparna,
Check table BSIP in it there is Field for currency(WAERS)..i think it is taken from here only....pls check...
hope it helps...
Regards
Priyanka.P -
Issue in material master update from presentation server using BAPI....
Hi Guru's...
i am trying to change the material master from presentation server (desktop flat file)
using BAPI(BAPI_MATERIAL_SAVEDATA) ....
while executing my program i am getting the message like material had changed...
but while in mm02 i am un able to fine the updates...
please find below program logic and correct me if any mistakes....
thanks in advance...
*& Report ZAREPAS36
REPORT zarepas36.
DATA : gs_bapimathead TYPE bapimathead,
gs_clientdata TYPE bapi_mara,
gs_clientdatax TYPE bapi_marax.
TYPES : BEGIN OF gty_itab1,
matnr(18),
matkl(9),
spart(2),
ntgew(13),
gewei(3),
meins(3),
END OF gty_itab1.
DATA : gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
gwa_itab1 TYPE gty_itab1.
TYPES: BEGIN OF gty_itab2,
abc(132),
END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
gwa_itab2 TYPE gty_itab2.
flat file at selection screen
PARAMETERS: p_files TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = p_files
filetype = 'ASC'
CHANGING
data_tab = gt_itab2
EXCEPTIONS
OTHERS = 8.
LOOP AT gt_itab2 INTO gwa_itab2.
IF gwa_itab2-abc(1) = 'S'.
gwa_itab1 = gwa_itab2-abc(132).
APPEND gwa_itab1 TO gt_itab1.
ENDIF.
ENDLOOP.
loop at gt_itab1 into gwa_itab1.
*Material
gs_bapimathead-material = gwa_itab1-matnr.
*Material details at client data
*material group.
gs_clientdata-matl_group = gwa_itab1-matkl.
gs_clientdatax-matl_group = 'X'.
*Division
gs_clientdata-division = gwa_itab1-spart.
gs_clientdatax-division = 'X'.
*Net Weight
gs_clientdata-net_weight = gwa_itab1-ntgew.
gs_clientdatax-net_weight = 'X'.
*Unit of Weight
gs_clientdata-unit_of_wt = gwa_itab1-gewei.
gs_clientdatax-unit_of_wt = 'X'.
*Base Unit of Measure
gs_clientdata-base_uom = gwa_itab1-meins.
gs_clientdatax-base_uom = 'X'.
endloop.
*calling BAPI for making changes in material and saving thru BAPI.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = gs_bapimathead
clientdata = gs_clientdata
clientdatax = gs_clientdatax.
IF sy-subrc NE 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error occured while changing material'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'material',gs_bapimathead-material,'changed'.
ENDIF.hi hello Guru's
i resolved the issuee..
pleaso go thru the below proram logic for your reference..........
*& Report ZAREPAS36
REPORT zarepas36.
DATA : gs_bapimathead TYPE bapimathead,
gs_clientdata TYPE bapi_mara,
gs_clientdatax TYPE bapi_marax.
TYPES : BEGIN OF gty_itab1,
matnr(18),
matkl(9),
spart(2),
ntgew(13),
gewei(3),
meins(3),
END OF gty_itab1.
DATA : gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
gwa_itab1 TYPE gty_itab1.
TYPES: BEGIN OF gty_itab2,
abc(132),
END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
gwa_itab2 TYPE gty_itab2.
DATA:ls_return TYPE bapiret2,
lt_bapiret2 TYPE standard table of bapiret2.
flat file at selection screen
PARAMETERS: p_files TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = p_files
filetype = 'ASC'
CHANGING
data_tab = gt_itab2
EXCEPTIONS
OTHERS = 8.
LOOP AT gt_itab2 INTO gwa_itab2.
IF gwa_itab2-abc(1) = 'S'.
gwa_itab1 = gwa_itab2-abc(132).
APPEND gwa_itab1 TO gt_itab1.
ENDIF.
ENDLOOP.
LOOP AT gt_itab1 INTO gwa_itab1.
*Material
gs_bapimathead-material = gwa_itab1-matnr.
*Material details at client data
*material group.
gs_clientdata-matl_group = gwa_itab1-matkl.
gs_clientdatax-matl_group = 'X'.
*Division
gs_clientdata-division = gwa_itab1-spart.
gs_clientdatax-division = 'X'.
*Net Weight
gs_clientdata-net_weight = gwa_itab1-ntgew.
gs_clientdatax-net_weight = 'X'.
*Unit of Weight
gs_clientdata-unit_of_wt = gwa_itab1-gewei.
gs_clientdatax-unit_of_wt = 'X'.
*Base Unit of Measure
gs_clientdata-base_uom = gwa_itab1-meins.
gs_clientdatax-base_uom = 'X'.
ENDLOOP.
*calling BAPI for making changes in material and saving thru BAPI.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata = gs_bapimathead
clientdata = gs_clientdata
clientdatax = gs_clientdatax
IMPORTING
return = ls_return.
LOOP AT lt_bapiret2 INTO ls_return.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error occured while changing material'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'material',gs_bapimathead-material,'changed'.
ENDIF. -
Issue: Sending material master using ALE-IDOC.
Hi all,
I am sending the material master data from one server to another.All the fields getting transported along with creator(field ERNAM) of the material.When viewed from WE05 the field is having the same data as original creator of the material in sending system.But when i view data in receiving system for field MARA-ERNAM the field is having the USER NAME giver in RFC-DESTINATION.can anybody guide so that the creator from IDOC is updated in database and not the creator given in RFC
destination.
Thank you.
Edited by: sanu debu on Jun 30, 2009 9:35 AMHi,
Hope you are using some middleware to transfer the Idoc to other system, check the mapping details from the middleware side whethere the field mapped correclty. -
Revision level issue in Material Master maintenance
Hi All,
When I try to change the revision level for a certain change number in our production client in the material master I get the following error
Priority of revision level E is too small
I have checked in CC13. But I could not find anything relevant.
There are a number of revision levels available in the dropdown list.If I select some of the last revision levels available in this dropdown list in the material master the system accepts it readily but if I select any of the earlier revision levels in the list the system throws the above error message.
Please can someone tell me what is wrong here.
Regards,
V SHello All.......any clues???
Does this belong to MM?......if not where can I get answers?.....which forum can I refer? -
Change/ removal of Unit of Issue in Material master Work scheduling view
Hi,
Is there a way to remove Unit of Issue from Work scheduling view? it is giving error message as "this is being used in BOM". Even if we put deletion indicator also it is showing same error message.
Regards,
R. SrinivasanDo a CS15 for the material in question and make sure you go in the BOM and select the material and click on delete/remove you can then do this.
I have tested it and it works.
Regards
Adeel -
Error when changing unit of Issue in material master
Hi,
When i am trying to change Unit of issue in Qualitymanagement view of a material using MM02 transaction, we got error message - "The unit of issue cannot be changed because the material is used in a BOM-------Mesage no. M3214"
Can anyone suggest what is the reason behind this. ?. how to avoid this error.
Thanks in advance.HI Aditya,
"The unit of issue cannot be changed because the material is used in a BOM-------Mesage no. M3214"
The reason is that material is used as a component in BOMs with the present unit of issue as a unit in the bom line item.Unless you change that bom line item unit to its base unit ,system will not allow you to change the unit of issue in QM.
First check in which BOMs the material you were changing is used as a component.this you can do in transaction CS15.
then change the unit of measure used for the material in bom line item to base unit of measure.if one only one BOM is there change in CS02.if more BOMS are there do mass change in CS20.
Then try to change the unit o fissue.now system will allow you to do the changes. -
We can´t change the class in Material Master classification Tab (MM02)
When i trying to delete the class in the Classification tab in PRD System, it triggers the following message
'Assignment (# material) (classname) can not be deleted' because If you use classification data for selection of components of the BOM. Or if the material still has lots that are classified.
But in QAS System it is possible to delete the class from Classification tab.
Can you explain me, why it works in QAS and not in PRD?To delete the batch class from your material, you will need to first archive the batch (object MM_SPSTOCK). Once the
batch are archived and deleted from the system, you may still have to run program RCCLZUOB. This program looks for objects which are still incorrectly assigned to classes. First run the program in Test mode (Delete flag is NOT set).
Then you can set the Delete flag to delete the assignments. Once the assignments are deleted, you should be allowed to delete the Class assignment in MM02. You must save the material and then go back in change mode to make a new class assignment.
Also review SAP note 113091. -
Standard Radio Button Tabs missing in Material Master
Dear Experets,
We have Upgraded from 4.5 to Ecc 6.0. We are finding an issue in Material Master.
When we create a material with the required selected Views and maintaing the datas like Basic Data and other Views, we usually have standard Radio button Tab to shift over from one View to another View. I am not able to find those Views either in Creation of Material Master, Or Change or Display ?
Can any one suggest on this? Is there any Patch is missing or any configuration setting has to be carried out ?
Please Suggest your valuable inputs.
Best Regards
Javeed
Edited by: JAVEED AHAMED on Apr 29, 2010 10:40 AMHi,
Check sap note 107404.
Regards
Ankur -
POP up in material master when viewing classfication tab
Hi All,
I want to use change master for chanigng the charecterstic value.
i did setting for class type 001 to include the charcterstic value changes using change master.
when i am trying to go to material master classification tab it is asking me to populate the change number.
can you please help in understanding is this standard to get a pop up or is there any way i can get rid of this pop up
my change number is not yet implemented
Thanks in advanceHi Thanks
but i want to make changes uses change master to characterstic value
i made the changes yet they are not implemented so i should not be seeing them untill change master is activated
the pop up is showing me the state after implementing change master
thanks
Maybe you are looking for
-
HT4623 My apps and my phone freeze up and go back to the locked screen what can I do?
My apps and my phone freeze up during use and go back to the locked screen. What can I do?
-
Process Multiple Files in PSE 7
I'm running PSE7. I'd like to take a group of images (jpeg's) and do the following to them: Run QuickFix on them. Save them as a new file with the name based on the original name plus some extra information. Resize the jpeg's to a size suitable for t
-
Error regarding plug-ins/won't open - unpackaged file is 4 GB - which is huge
When I open a certain file (which has not had any issues) it gives me an error regarding plug-ins/won't open. The odd part is that the unpackaged file is 4 GB - which is huge. The file also doesn't contain that much information to be that size.
-
Encoding problem in sql developer
I have problems with encoding when use timesten database with DatabaseCharacterSet=AL32UTF8. If I use DatabaseCharacterSet=US7ASCII all ok. I don't have this problem if connect to timesten using ttisql. Server - TimesTen Release 11.2.1.4.0 (64 bit Li
-
Windows 7 SP1 64 Bit Professional Adobe InDesign CS6 version 8.0 12 GB Ram 128 GB SSD Whenever I try to change from the arrow to the text tool, I have to wait several seconds for the program to make the switch. On other machines, it's instantaneous.