Issue in New Asset Accounting

Hi Experts,
We have activated the new Asset accounting Datasource (0FI_AA_20) delivered as a part of EHP4 reporting financials.
Now ee have replicated the datasource in BW and the model is activated.
The model contains 2 cubes: 1 Basic(C20) and 1 Virtual (R20)
Now there's a standard SAP delivered query - " Inventory List".
After loading data into the basic cube, when we executed the query by routing it to basic cube, it showed data in the query.
However when we routed the query through vurtual cube R20, to get the real time data, it showed error - " Fiscal year variant not present".
When we checked at ECC in Table T001, for the required company code the Fiscal year variant is mentioned as V3.
We don't understand tht where is the query checking for the fiscal year variant?
Plesase suggest

Hi Debanshu:
Take a look at SAP Note 1484587 - "DataSource 0FI_AA_20: Current year is ignored"
Regards,
Francisco Milán.

Similar Messages

Error during Year-end closing Asset Accounting (AJAB)

Hi,
While executing transaction AJAB (year end closing AA) the system, the system issues a message "Transactions not completely periodically posted". The detailed message is AU075 "Asset balance sheet values not completely posted".
Processing the error message:
While proceeding through the error message details I checked "Define How Dep Areas Post to GL" and found that 4 depreciation areas are maintained as under:
Area/Description/ G/L/ Target Group
01/ Book dep/1 (Area posts in Realtime)/0L (Leading Ledger)
15/Income tax dep/0 (Area does not post)/ Blank
21/ IFRS/ 3 (Area posts dep only)/1F (IFRS Ledger)
Then I clicked on start APC program, which leads to transaction ASKB (Periodic Asset Posting). The transaction could not be posted as document type is not assigned for periodic posting of Asset Values in SPRO>Fin. Accounting (New)>Asset Accounting>Integration with GL Accounting>Post APC values periodically to GL Accounting>Specify document type for periodic posting of asset values.
I've got 2 queries:
1) whether year-end closing can be executed if the document type is assigned and transaction ASKB is run.
2) If the answer to first query is yes, how come the same error did not encounter in other company codes (the error occurred only in 2 company codes). I've also checked the depreciation area maintained in asset masters of the company code where no such problem was encountered and found it to be same as the company code where the problem has occurred.
Seek your expert advise to resolve the issue.
Thanks,
Vipin Patankar

Hi Malhar,
Thanks for your prompt reply. I understand that the issue can be resolved by assigning document type and execute ASKB. At present document type 'AF' is being used for depreciation posting, can we use the same document type for APC value posting or some other document type should be used.
I still need some more highlight on the reason for not facing the problem in other company codes.
Thanks,
Vipin Patankar

Error occuring while posting purchase of main asset in asset accounting

Dear Experts,
while am posting main asset using f-90 transaction code, it shows that," you cannnot post with transaction type 100 here".
How can i resolve the problem, kindly help me.
Regards,
RajuPotharaju

Dear
SPRO- Financial Accounting New- Asset Accounting---- Valuation---- Depreciation Area-- Define depreciation area.
Select Define Depreciation area.- For area 1 in GL column it must 1 that is area post in real time.
Select that area click on details button. Posting to GL must be 1 Area post in real time.
Regards
shankar

Asset Accounting Depr. Post

Hi Gurus..
My Org. Using SAP from Past 5years with 2Depr. Areas now the want to increase Depr. area from 2 to 3...
Wht is the procedure, can u please give solution..

Dear sai9538
Just copy of Depreciation area. Financial A/c New - Asset accounting . Orgnisation structure - Copy referance chart of depreciation/Depreciation Area
click on Copy/Delete Depreciation Areas
select book depreciation area - select copy as icon - Give new depreciation area - give your requirements
Regards
shankar

Assets Accounting - Structure of Assets Class & Individual Assets

Dear Sir / Madam,
I need to configure FI-AA
In the organization there are 2 plants,
In each plant there is Land, Factory Building & Machinery,
Over and above these assets there are some common assets like Vehicles, Laboratory equipment etc.
Please guide me as to how do I design structure of these assets so that I get
1. Plant wise Assets History Report
2. Individual assets wise Assets History Report (Like Total Machinery, Including both the plants & Common assets.)
Thanks in anticipation
Regards
Chirag Shah

Hi Chirag,
We define the field status for the asset master in the screen layout. The pathe for the same is -
SPRO>>Financial Accounting (New)>>Asset Accounting>>Master Data>>Screen Layout>>Define Screen Layout for Asset Master Data.
Here check the staus maintained for plant in the logical field group 3 (Time-dependent data). Make it Required or optional and then check if the field is available in AS02.
Please revert for any clarification.
Thanks and Regards,
anit

FICO : Asset Accounting - Depreciation Run Issue

Dear Friends,
I have an issue in asset accounting.
Let me explain the actual background of this issue.
1. I created a new company code(2000) by copying the existing one(1000 along with the closed year 2009
2. After that when i was trying to post acquisition for an asset i got the below error
You cannot post to asset in company code 2000 fiscal year 2011
3. Then i closed the year 2010 and opened 2011, it allowed me to post in the month of june
4. Now i am trying to run the depreciation for june, its giving the below error.
According to posting cycle, you should post period 001 next
5. What could be the reason for this error , is it the correct procedure what i am doing it now?
Please help if someone has an idea about that
Thanks ,
Perumal.

Hi,
You can get the solution if you double click the error message.
Please note that depreciation of current month can only be posted if the depreciation dycles till the previous month is completed. Coming to your case, you have opened the year 2011 and trying to post depreciation for period 6. You need to run the depreciation cycles from period 1 to 5 before trying to post for period 6.
Regards,
Kiron Kumar T.

New Blogs: Asset Accounting and Project Systems

There are two new blogs out this month in the ERP space.
Dominic Nadeau has blogged about a useful tcode in PS to track changes to a project.
/people/dominic.nadeau/blog/2008/06/09/fields-in-problem-in-a-project
I've written a blog on the Schedule Manager Monitor. I've given an example related to Asset Accounting but it works for most all areas in FI/CO.
/people/nathan.genez/blog/2008/06/17/gaining-more-insight-into-fixed-asset-job-monitoring
-nathan

When you create the WBS in will create from there an AUC. In the auc in the tab origin you see the project number.
When you settle it from the AUC (in PS) to the final asset you found the AUC number back in the asset tab origin. You can click to on the posting on the asset

11.1.2 - Workforce and CAPEX issue - Add New Hires and Add New Asset Rules

Hi All,
We are working on Oracle Fusion 11.1.2 and are using the out of box functionality for Workforce and CAPEX.
We are facing a weird issue in case of the above Modules when we try to Add a new Hire or a new Asset in the respective modules using the Add TBH Hourly , Add TBH Salary and Add Asset rules.
The Issue is sometimes the correct number of New Hires or Assets is added as specified in the prompt. For instance, if specify Number of New Hires as 5, then 5 rows of TBH are added on the web form dynamically with other employee properties populated on the form as mentioned in the prompt. However, at times this does not happen, so if I specify 5, 4 rows are added, if I specify 15, 7 rows are added and so on.
The out of box rule looks okay, we are not sure why this should happen?
Has anyone of you faced a similar issue, It would be really helpful if you can share your thoughts.
Thanks a ton in advance.
Madhavi

Have you try to check the related Business Rule? In older version Add TBH menu related to a Business Rule. Never configure this module on 11.1.2 but maybe the add tbh menu related to a Business Rule or Script on Calculation Manger

Issue when creating a new email account on Adobe BC

Hi,
I got a big issue when I tried to create a new email account for my site, which is a very email account to me, and I had been using that email address for over 10 years.
Here is the issue, When I created this email account, Adobe BC keep telling me that account has been created (please see the screen shots below), but I did not see this email account on the BC's backend email account list at all. I tried to create that email for over dozen times, it just won't work!
Please anyone who can help me on this, or anyone from Adobe BC tech support team, please contact with me. Becasue I having hard time finding your tech support telephone numeber.
Thank You.

Hello designonly.
You are saying that you have been using that email address for over 10 years. So you are trying to make an address which already somewhere exists?
That brings me to another thing - is the DNS setup made well? In order to make email address work, you should edit the A-Name & NS. Sometime even more settings (depend on domain registrar).
designonly, is this your first email setup?

Profit Center Derivation : Asset Accounting (New General Ledger) ?

I have configured & activated new GL Accounting in my system (ECC 6.0). All my splitting & derivation is working except for transactions related to assets. Whenever I try to do a posting against asset, I get following generic error.
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
I have done & checked the following :
1. given cost center in asset master which derives the business area. the profit center is given in the cost center master
2. checked the field status group for the asset recon. a/c, posting keys 70, 75 where PC is optional.
3. Confirmed that doc type AA and asset recon ac are characterised for splitting.
I am clueless why is the asset not taking the profit center during transactions.
any welcome would be deeply appreciated. ?
pls answer ??
Moderator: Please, search SDN

Hi, you need to activate cost center in AA,and make it optional for account and posting key, then PC'd derive from Cost center
Also check While posting F-90 profitcenter is blank and Grey mode
Edited by: alex ice on May 23, 2011 8:28 AM

How to test a new transaction type in Asset Accounting?

Hello everybody,
I need to explain how to test if the creation of a new transaction type in Asset Accounting was correct.
In other words, under what condition what should be the expected result.
The requirement was:
Create 2 new transaction types in asset accounting in order to book various business transactions:
- Create a new transaction type in asset accounting in order to book the credit memo.
- Create a new transaction type in asset accounting in order to book the scrapping cost.
And we make it throught AO73 transaction - Define Transaction Types for Acquisitions u2013 and OAYA transaction - Limit Transaction Types to Depreciation Areas u2013
Many thanks in advance,
Alvaro

Hi Alvaro,
I think best is you test a posting with the standard transaction typ delivered by SAP first. For example for credit memo in the aqcuisition year the standard tty is 105. If you post with this transaction type you then can check the document and you will see what line items are posted in which way.
To create your own transaction type:
You can check the customizing in the standard transaction type and then you could copy it to your own transaction type and give it your own name, and which you may then want to limit to certain depreciation areas via OAYA as you rightly pointed out.
For retirement by scrapping I would suggest the same: make a posting using the standard delivered transaction types and then check the document to see how the system posts. The make the required admustments in your own created transaction type copied from the standard transaction type.
I hope this helps,
Kind regards,
Brigitte

I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?

I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?

I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
Just want to avoild spending hours migrating everything across....

Yes, I can read but just can't write DVD's. I get:
This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
In the old account I have reset SMU, Pram... but no change.

Setting Up a New User Account - iTunes issue

My wife and I were both using our Mac as a single user, but logging into iTunes under separate iTunes accounts to download our own music and apps.
This week I set up a new User Account in her name, and transferred all music and apps to her User Account so she would be able to access and sync on her own account, just by fast switching, rather than logging into iTunes each visit.
When she plugs her phone into the iMac to sync via iTunes, she gets the following message:
*iTunes could not sync information to the iPhone " " because another sync client is already running*.
Anyone had this problem and found a solution ?

I recently had this same error message problem with my 3GS. Here's everything I did, one of the steps solved the problem...
1. Restarted with the phone unattached.
2. Repaired permissions using Disk Utility.
3. Restarted the phone. Here's where I had some difficulty: After swiping to confirm the shutdown, the screen went black, and I had the spinning icon that wouldn't go away. I ended up having to hold the lock and home buttons down to force shutdown the phone. I powered it back up, and it took forever to start, but it eventually did. I then power-cycled it one more time, and everything was back to normal.
4. Started up iTunes. Go into the preferences, and under the "Devices" tab, I found my previous backup. I deleted it.
5. Plugged in the phone, and everything was normal. iTunes made a new backup, so the sync took awhile, but it was successful.
Good luck!

Trouble with CS2 on Mac G5 with new user accounts - activation issues?

My system is a Mac G5 Quad running OS 10.5.8, and I have the CS2 premium suite. When I bought the machine I did everything under one user account. Several months ago the account started giving me a few problems, and my circumstances changed, so it made sense to create new, separate user accounts on my Mac for work and personal use.
Recently I offered to help a friend out with some design work and tried to start InDesign CS2 from my new business account. I was immediately presented with a demand for a serial number. I looked it up and entered it. An error popped up that said
"Invalid Serial Number
The serial number you provided is not valid.
Please check your serial number and re-enter it."
I tried a couple more times, making sure I had it right. No success.
I gave up and launched my original user account, launched InDesign and started the project. I set the document up and tried to save it. InDesign displayed an error stating "Cannot save "Untitled-1" under a new name. The file "DBTmp[bunch of numbers]" is damaged (error code:0" Each time I relaunched and tried again the temp filename was different.
So now I suddenly am without one of my primary tools and have no idea how to get it back. I am guessing this is a problem with the activation mechanism, but can't find many resources on this topic. It would appear that my attempt to launch InDesign from my new account triggered a piracy protection code or something.
I am typing this while waiting on hold for Adobe support. 25 minutes and counting...
Thanks.
Paul

Bob, Thank you so much!
I already have Acrobat 8.2.4, so I didn't start installing 8.2.2. However, I started working through solution 2 and discovered my new business user account was denied access to /Library/ApplicationSupport/Adobe/TypeSpt/Unicode/Mappings/. I changed the permissions on that directory to give my account read access, and InDesign fired up like normal. I didn't even need to replace the files.
Thanks again for the assistance.
It's interesting to learn CS2 is not supported in my OS version. It works fine (until this).
Paul

Issue in New Asset Accounting

Similar Messages

Maybe you are looking for