Issue in Output type

Hi,
We are trying to do a PGI via IDOC.
When we do that the output type is not created automatically in the delivery.
Can anyone help on this?
Regards,
Ankur Parab

Hi,
Actually the issue is when we do PGI manually the output message gets determined automatically but when we do PGI via IDOC using basic type DELVRY05 it doesn't gets maitained.
Condition records for output types were maintained. Please let me know if there is any note available for the same for ECC version.
Regards,
Ankur Parab

Similar Messages

Script Form print issue with output type

hello,
i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
output device is 'LOCL' "print immediately" and "release after output" are active in communication.
a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
after checked, custom script from caused this issue, but how to resolve this problem?
best regards,

Hello,
The error ME142 can have different causes like missing authorizations
or a terminated connection. Please see SAP notes 397691 and 532251. This note
states that is errors occur when purchasing documents are output, If
errors occur when purchasing documents are output, the system generates
an error message in the message log of the message overview. However,
error message ME142 'Error in OPEN_FORM for document &' contains only
the information that an error occurred and not the error cause. With the
attached source code, the error cause is also displayed in the error
message.
Regards,
David

Multiple issue in output type

Hello,
we have output ZROS configured. No custom enhancements. Sandard EDI output us attached to it. In the config of output type, we have "multiple issue" ticked.
1) what is the meaning of multiple issuing. does it mean, that whenever someone goes into delivery in change mode and goes out of delivery, system will give a pop up that delivery has changed and if we press save, then the output will be trigerred ?
2) We have seen whenver the shipment is created for the delivery, then the transportation planning status of delivery is changes (as per standard sap ), then we see that there is another output ZROS trigerred from delivery ? Why is the output Trigerred when transportation planning status is changed for the delivery ?
regards
Pamela

1. Once you check the 'Mulitple Issuing' box then it allows you to use more than once the same output type for the same partner.
2. Answer is on your question itself, i.e., you have checked the 'Multiple Issuing' Check box for your output type so whenever you do changes in delivery so automatically same corresponding output type will be triggered.
If you don't want this to happen for every delivery changes then you shouldn't check the box.
Please try above the step to stop multiple output trigger.
Anandkumar KS

Multiple issuing in output type?

I want to control printing times of a output type.
can I apply the function of "Multiple issuing" in a output type to "Transm. Medium" = 1?
who can give me a way?

In the config, there is an option to "Multiple issue", i am not sure if you are referring to this. If this option is checked then the system will propose this output everytime the document is opened in Change mode.
Now to answer your query reg, processing the output in a specific time you may choose the Dispatch time as "Send periodically with scheduled Job" or "Send with own transaction".Once you do this the o/p will be proposed but will be in Yellow status and you can run a job to process these outputs. I think you can run the program RSNAST00 in the b/g at specific times to process these o/ps.
Hope this helps.
Regards,
Mani

Issue of output type RD04 through EDI

Hi Friends,
RD04 which is used for intercompany billing normally uses EDI as the transmission medium. My question is in what form the invoice receiving party (which is usually the supplying plant) gets this invoice? How exactly the person sitting at the other location views this invoice?
Also EDI being an interface, an intergral part of SAP? Does it need any other softwares to connect with SAP?
Where do we do EDI related config ?
Hope somebody is patient enough to go through my query and provide me with the needed info.
Thanks in advance
Regards
mahesh.

Hi Mahesh,
The invoice recipient may be receiving the output in any format he likes. The entire process flow is as follows.
1. An EDI output is configured in SAP and triggered while creating the invoice document.
2. Once the output is triggered, it fetches values from SAP, and creates a flat file(say a notepad file) and send that file to the Middleware(TIBCO/Mercator etc). To send the document to the correct middleware, the IP settings, RFC destination etc should be configured in
3. Now the middleware receives the data, populates the same in the table structure it has and then send the data to the receiving system based on the RFC destination it receives from SAP.
4. The data finally reaches the destinatino system where this data is processed and the transactions are executed using those values.
In the whole process, there will be programs in SAP, middleware, receiving system etc which takes care of the data formats, data processing and executing transactions.
Hope this helps you to understand how EDI works.
Configuration of EDI has to be done using output types which varies depending on the application. Generally we can do it in NACE transaction.

PO print issue with output type

hello,
i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
output device is 'LOCL' "print immediately" and "release after output" are active in communication.
a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
how to resolve this problem?
best regards,
Edited by: colin hong on Nov 11, 2010 5:25 AM

Hi,
With the help of ABAP'r, please check the Custom Scriptform...
Also chk "http://help.sap.com/saphelp_nw70/helpdata/en/d6/0dba1a494511d182b70000e829fbfe/content.htm"
1. Re: difference between open_form & Start_form (urgent)
Regards
GK.

Output type - LD03 issues

Hi friends,
I am having an issue with output type determination LD03 -packing slip. We are having three access sequences and condition tables. The condition records are also maintained.
Shipping point/ Route --- Printer A is assigned
Shipping Point/Delivery type---- Printer B is assigned
Shiiping point --- Printer C is assigned
When the shipping and route is 5000 and 0089 respectibely, the printer should be A. However the printer "C" is getting picked and printing there. What should be changed so that when the shipping point and route are 5000 and 0089 respectively. I have maintained a condition record with printed C. Why is the access sequence falling all the way to just shipping point???
Please advise

Dear Sanjay,
Please check the delivery or sales order route is getting determined or not.
If the route is not gettting determine then the system will pick the condition record based on shipping point only.
I hope this will help you,
Regards,
Murali.

Output type not getting saved in the PO

Hello Team
we are facing one issue where output type is not getting saved in the PO.
we give one output type and than save it , after going back to the PO we see that it is not there.and no output issued
the PO is released properly and there is no issue , any idea what could be the reason for it

Hi,
Check in SU3 t.code, did check box selected u201CDelete After Outputu201D in Spool Control segment in Default TAB
Also check Partner Function VN maintained in Default values TAB in NACR--- > EF Application for your output type
Cross check partners {VN, PI, GS) are assigned to your PO output type in Partner Roles per Message Type
Regards,
Biju K

Triggering output type from VL02N

Hi,
I need to attach some kind of routine to VL02n.
The requirement is that in VL02N, on goods issue, an output type is supposed to be triggered.
Please suggest me as to how to trigger this output type on goods issue.
The functionality is like this.......on triggering the output type, idocs are generated. SO i need to write a routine sort of from where i can trigger and then write the idoc related code

Hi,
just follow this link..it might be useful...
[Automatic Output Type from VL01|http://wiki.sdn.sap.com/wiki/x/BY-jBw]
Regards
Kiran

Reprocess output type

Hello all,
Does anyone know if there is a FM which creates a repeat proces for an output type?
I will try to explain the issue by an example...
There's an output type on a inbound delivery and it has been processed already. Ok so far.
Now I am going to change a status in my shipment where the delivery is assigned to. Changing this status should set the output type on the inbound delivery to "repeat processing". Actually it should do the same if I would go into the change of the delivery (tcode vl32n) and you save it again. The output type is set for processing then again.
If anyone has usefull anwser....
Regards, Patrick

In Output type definitions (trxn NACT), select the check box for Multiple issuing.
This will result in re-issuing the output type each time you go to the change mode of the delivery.
Regards
Baseer

VL02N Output type issue.

Hi,
When I execute the tcode VL02N for any output type (ZEU5) for print preview and external mail then it is giving error that "Output could not be issued".
I have also checked the config of NACE , it seems to be ok.
So what are the other possibilities of this error.
Thanking you in advance,
Regards,
Vikram

Configuration of NACE does not make all the difference. The only way to come to the solution is to debug from point when button is clicked for print preview or etc.
Possible reasons may be there calling program before making a call to script or smartform encountering a problem. It may be that program is not able to get the desired data correctly from the tables or some other problem(Mainly due to subrc not coming to be 0).
Apart from this even if call is made successfully to the form but inside there could be problem like using command in smartform.
Thanks,
Mark

Multiple output types issue

Hello,
I configured two output types (Bill of lading & Packing list) for the application V7-transaportation. I am able to get both the outputs. Now, I am able to get a print for BOL and also a print preview. For Packing list I am able to see the screen view(print preview), but when I try to print it directly it gives me an error " output could not be issued" . When I go to Output-> screen it is showing me the output.
I have maintained all the required print parameters and assigned the print profiles to the output types.Is there a problem with my configuration? can't I print two output types simultaneously?

Hi,
Is there a printer defaulted to your output types? You can issue multiple outputs at the same time.
If the output types have been determined in your document, then nothing wrong with the determination process.
If the output can be previewed, nothing wrong with the SAPScript or Smartform.
So maybe something to do with compatibility with the printer chosen.
Phyllis.

Output type issue

Hello,
I have created new Z* output type and done all confirguration related to this.
When trying to save this output type for one of the material doc. in transaction MB02 - > Details & Messages, am getting below message
"Express Document " Update was terminated " received from author "User id" "
When checked the same in SM13 transaction, following error message found :
Class : J3R_LEGAL_FORMS
Number : 022
" Number range error: number could not be generated for number range J3R FORMS (01). "
Is this realted to number range issue ? If so, how can i resolve this ?
Appreciate your help.
Thanks
Nag

Hi,
Please check with ABAP , seems output Form assignment error , not sure
Thanks
Diwakar

Automatic triggering of output type in Goods issue

Hello Experts,
I am trying to pick the output type while creation of goods issue document using transaction MB1A. After creation, it is not coming automatically. I did the customization setting for maintaining conditions based on output type WA02, adding trans/Event-WA, print version-3, print item-1 but still it is not populating automatically while creation of GI document.
Could you please let me know, how to do it or if i am missing some customization.
thanks,
Karun

Hi,
To trigger the OUTPUT automatically you have to maintain the CONDITION RECORDS in MN21
Goto the Transaction code MN21 and enter the OUTPUT type as WA02 and give the following details
Trans/Event type
Print version
Print item
partner function
Medium
Date/Time
Language.
After maintaining this check whether the OUTPUT determined automatically or not.
I hope it will determine automatically.
thanks,
santosh

EK00 Output type issues

We have an issue with EK00. We have the shipping points defined in VP01SHP but it does not create a EK00 for the shipping points. What else could be wrong?
Regards,
Davis

I found the issue. We had the wrong output type in OVLT.

Issue in Output type

Similar Messages

Maybe you are looking for