Issue in overlapping of windows with main window.

Hi all,
My requirement is to have 4 windows at the end of main window.
the 4 windows should be printed only after end of all the line items in the main window.
the problem here is if i extend my main window till the end and overlap the 4 windows. if line items are less it is printing perfectly fine. if line items are many the 4 windows are overlapping on line items. if i decrease the size of main window and place 4 windows after that, if line items extend to two or three pages. windows space will be wasted in page 1 and page 2 as the 4 windows will be printed only on the last page i.e end of line items.
Any pointers for solving this would be appreciated.
Regards,
Sreekanth.

one death you gonna die, thats what i always say to customers when it comes to this topic.
IF you want certain things printed on certain positions of a sheet, you NEED to reserve this space, so that no overlapping issue comes up.Reserving this space means that this space may stay free in matter of page breaks and such.
So they either live with the wasted space, or they live with the information having an uncertain position, since you just give it out in main window after all the line items.
If first case is BLACK and second case is WHITE, then you have to know that in this scenarion there is no GRAY, just WHITE OR BLACK.

Similar Messages

  • Networking Issues after Upgrading to Windows 8.1

    I have a Windows 8 desktop PC that is working fine with my network.  I can browse the Internet fine using all major browsers etc.  After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
     The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
    IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error.  I normally have to refresh 2-3 times to get a new page to load, sometimes even more.  Everything works
    fine from a laptop connected at the same time so it isn't an network issue with my provider.
    I thought this might be a driver issue with the two on-board Marvell wired network adapters.   I wasn't able to rollback the driver to older versions I found on the Internet.  I then purchased another network card, Intel Desktop gigabit and the
    issue still persists with that adapter.  I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled.  I tried a new network cable and no luck either.  I also tried resetting the IP stack using
    the various netsh commands.
    After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store.  I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
    some of the recent guides that are available.  That all worked but it didn't fix the networking issues.
    I re-installed Windows 8.0 and the networking is now fixed and back to working normal again.  I'd like to try again but I think I will have the same problems.  I can't imagine why this would be a driver issue as I tried 3 different network adapters
    and two installs of Windows 8.1.  Any ideas what would be the cause of the Windows 8.1 issue?

    HI,
    Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
    the performance of win8.1.
    Please also test this issue in safe mode with networking.
    Please refer to:
    Windows Startup Settings (including safe mode)
    http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
    I’d like to share the following article with you:
    Wired and wireless network problems
    http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
    Regards,
    Yolanda
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.
    The issue occurs in safe mode as well under Windows 8.1.  The motherboard is an Asus P5B Premium, however it works on Windows 8.  How would I update the chipset when booted into Windows 8.1?  In Device Manager it wasn't allowing me to update
    the network drivers as they were newer versions already installed.
    Edit:  I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.​4.​0.​1026 and the issue still occurs.  I am also running the latest BIOS that is available.

  • Some issues after clean installing windows 7 pro 64bit

    Hi,
    I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
    1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
    2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
    3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
    3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine.           What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
    Can anyone help me? Never had to deal with these issues.
    Thanks in advance 
    I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
    Who helped you today? Do not forget to thank him.
    My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

    Hello,
    Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI?  If so, did that work?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Virtual Machine Generation 2 Boot Issue!!! (Windows Repair Bootloop! ) Hyper-V 2012 R2

    Hello people, I'm having the following with the GEN 2 in Hyper-V 2012 R2.
    Issue: After bouncing my GEN2  Hyper-V VM I get this.
    Then I get the Windows Repair and nothing happens after this point!  
    Does someone have experience this issue ?
    The bad thing with it is as it's production there's no checkpoints and I cannot recover it!
    Note: this doesn't happens with GEN1 VM's.
    Any help will be really appreciated

    Hi, thanks for the quick response. Now the images are appearing... oh well...
    Quite familiar to me this one.  I have a couple of, or more, remedies;
    1: increase the available memory to at least 4096 - just whilst installing you can alter it later.
    2: make sure the enhanced session switches (both in Server and User) in the hyper-v manager are not enabled - you can re-enable them later
    3: Disable "Enable Secure Boot" in the VM settings - Firmware - you can enable it after the install
    4:  make sure Heartbeat is enabled in the VM's settings - Integration Services
    5: Last, but not least, make sure the Smart Paging File Location is the same as the VM's location. Eg: VM: <D:\VMS\Machines> Smart Paging Location: <D:\VMS\Machines>
    One or more of these has "always" worked for me in the past.  I don't offer any warranty with these "solutions", but by disabling or enabling the various options I have nearly always been able to get the VM started. 
    Is the ISO you are utilizing good?  One client of mine assured me he had never touched the ISO saved in that 'special place'.  A quick peer at the files inside the ISO revealed that he had been at the files and changed a minor file and then changed
    it back to what he thought it had said...
    Cheers
    Andrew

  • Sleep and Shutdown issues after upgrading to Windows 10

    Hi there,So I'm having issues with sleep and shutdown after I upgraded to Windows 10, the laptop won't go to sleep or shutdown properly. The screen turns off, but the power LED stays on and the fan as well. If I chose sleep it won't wake up no matter what I try, and I'd have to perform a hard shutdown everytime.Any solution for this problem?Thanks.

    **I have posted this in another area with the same issue** YES!!!!! A Solution that worked.  Spread the news.  It has to do with the Intel Virtualization Tehnology. Didn't know what that was until this issue came up in Windows 10. First, find out if this is your issue.   1. I installed the 'Intel Processor Identification Utility' directly from Intel.2. After installation, open the program and go to the 'CPU Technologies' tab.3. If it says 'YES' for Intel Virtualization Tehnology, proceed. Solution...(at least on my system) 1. The next thing you have to do is go into the BIOS.  If you have not done this before, proceed at your own risk.         You need to restart the computer and enter the BIOS (for me I hit F10 at the HP screen)2. Within the BIOS, there is an 'Advanced Options' section3. In this section there is a line for 'Intel Virtualization Tehnology' and it will say enabled or disabled.  My computer said disabled.4. If this is the case, change the option to 'ENABLED'; then SAVE and EXIT from the BIOS.   The Computer will restart and from that point on Shut Down, Sleep, etc. has worked.  WOW this was a frustrating issue. Almost went back to Windos 8.  I take no credit for this solution, I pieced it together from other posts on this issue.  Hope this helps.

  • I am running iTunes 11.3.1.2 on  my Windows 8.1 laptop and am unable to change any info on any songs in my library. I have had this issue since switching to Windows 8.1

    I am running iTunes 11.3.1.2 on  my Windows 8.1 laptop and am unable to change any info on any songs in my library. I have had this issue since switching to Windows 8.1
    I don't have this same issue on my Windows Vista laptop which is no longer being used fro iTunes

    I am running iTunes 11.3.1.2 on  my Windows 8.1 laptop and am unable to change any info on any songs in my library. I have had this issue since switching to Windows 8.1
    I don't have this same issue on my Windows Vista laptop which is no longer being used fro iTunes

  • When one FF profile is open, and user clicks another FF icon, system wont popup the profile manager. The "Dont ask at Startup" option is unchecked. Issue is seen in Windows 7 Enterprise edition

    I am using FF 3.6.12 and had created several profiles. When i launched FF, then at first time Profile Manager pops-up and ask for profile to choose.
    Then Once i have selected a profile, FF launches.
    Then again i try to launch the FF, but then system opens the same profile again n again. No Profile manager pops-up.
    The "Dont ask at Startup" option is unchecked. Issue is seen in Windows 7 Enterprise edition

    See http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

  • Serious locking issues with Main Stage 3

    Having serious locking issues with main stage 3.  I just did a music gig over the weekend with main stage 3, and the application locked up 8 times during my performance.  There were also several times where there was a delay between the time I struck a key on the midi controller and the time sound actually came out of the audio interface.  Has anyone else ran into this problem??
    10.
    I am running mountain lion 10.8.5, on a 2009 Macbook 2.53 GHz Intel Core 2 Duo. w 8 GB Ram.
    Anyone know how to fix this, if even possible?  

    Just read some reviews. There seems to be a lot of problems with the latest main stage update.  I didn't notice these latency problems until did the latest update..
    Apple please fix this quickly!!!

  • Problem with main screen of firefox

    After the upgrade from firefox 15.0 to firefox 16.0.2 is problem with main screen. At the top of the main screen shows the bar (caption bar of main form) as I win xp and under this caption is caption bar as win 7.
    Firefox is run on the Windows Xp, if will by better, I can send screen but I do not know where is possible add image at this error report....

    I add screenshot. If I make FF update at home (windows 7) is all ok, problem is only at work an Windows XP

  • Sub Bank accounts mapping with main Bank account

    Bank accounts
    Hi
    How can we will map with main bank account to sub bank accounts.
    Example; My main bank account: 1111, and
                              Sub bank account :  2222 ( Deposit account)
                              Sub bank account: 3333 (Cheque issue account)
    Regards
    PVC

    Hi
    Bank account-  This is the G/L account that you provide at the Housebank level configuration in FBZP.
    Sub account - This is the G/L account which you provide in the Bank Determination level in FBZP
    Now conceptually there are many transactions which need to be routed through clearing accounts. This is where the sub accounts come handy and are used for clearing purposes. they are open item managed accounts. So clearing is possible. In the end the main bank account tallies with your bank balance and moreover the clearing accounts become zero after all clearing has happened.
    Moreover the best way to maintain the G/L in SAP would be
    XXXX0 as the Main account
    XXXX1 say outgoing checks
    XXXX2 say outgoing wires
    Hope this clarifies
    Rgds

  • Compatible issues firefox v37.0.2 with att yahoo mail

    6:43 PM 4/24/2015
    Compatible issues firefox v37.0.2 with att yahoo mail
    Hello: this is my first post,hope I am doing it properly.
    I am using W7pro OS and ATT DSL 3.0Mbps dl
    I noticed this week that I was unable to save attachments from my ATT Yahoo mail I could view them but no choice as to ware to save them--only choice (save to my comp.)But no ware to be found.
    I reinstalled v 36.0.4-preventing auto upgrade-But still had same problem.
    At this point contacted ATT support supervisor-we spent about 4hr working on problem--He was using your v 31.5.0--and had no problem accessing and saving attachments using remolt access on my comp.
    We also found using my comp.FF v 36.0.4 & v 37.0.2 browser,that we could without any problems access an save attachments--AOL mail-- & mail2web.--& IE--Even when forwarding inaccessible mail to above sites.
    He informed me that (ATT mail Yahoo)only uses resources to make them compatible with--Google IE & Chrome &Apple? (basically he was saying,that they would NOT commit resources to FF--any version)BUT he was not allowed to commit.
    PS: The last time I know it worked ok was 3-18-15 I have 3 comp.2 wxp pro 1 w7 pro the same problem on all 3--so feel confident not OS related-but compatible problems with FF & yahoo mail.
    The ATT support supervisor-was unable to determined the date they may have made changes on their site.without extensive research-which we decided wasn't worth the effort as they wouldn't look in to it.
    I hope someone or FF will be able find a workaround-as I do not want to use the browsers they suggest. I LOVE FF.
    Thank You Gary

    I have no idea what you are asking me to do ??--can you explain at a dummy
    level--I wont be offended.
    gary

  • Issue when creating sales order with Sold-to/Ship-to Party's state

    Hi All,
    we have issue while creating Sales Order with picking up of State tax
    for Ship-to-party & Sold-to-party.
    <b>When we create a sales order, for the sold to party 140052732 and
    ship to party 140052733 it is picking state tax. Which should not
    suppose to pick? Because the partner is marked as tax exemption</b>.
    Can any body tell me how can we solve this issue!
    Why this is happening!
    How to make not to pick tax when it is marked for tax exemtion.
    As i am not Functional guy i am not aware what is happening here!
    Can anybody solve this issue!
    Thanks in advance.
    Thanks,
    Deep.

    Hi Deep
    What do you mean by "It is picking up state tax"? Does it mean that in the pricing procedure it is picking up a condition type which is meant for state tax?
    If so go and check the condition record meant for it. Follow the following steps
    1) Go to Sales order
    2) Select the line item for which the state tax is being picked.
    3) In the condition tab select analysis.
    4) In Analysis you shall find the condition type meant for state tax.
    5) See which condition record has been found.
    6) Go to VK12, enter the state tax condition type and check the condition record for that state tax.
    7) If wrong correct it.
    8) If anything else come back to the post and inform the details
    Thanks
    Regards
    Sunil

  • Issue when creating sales order with Sold-to/Ship-to Party's state tax

    Hi All,
    we have issue while creating Sales Order with picking up of State tax
    for Ship-to-party & Sold-to-party.
    <b>When we create a sales order, for the sold to party 140052732 and
    ship to party 140052733 it is picking state tax. Which should not
    suppose to pick? Because the partner is marked as tax exemption</b>.
    Can any body tell me how can we solve this issue!
    Why this is happening!
    How to make not to pick tax when it is marked for tax exemtion.
    As i am not Functional guy i am not aware what is happening here!
    Can anybody solve this issue!
    Thanks in advance.
    Thanks,
    Deep.

    Hi Deep
    What do you mean by "It is picking up state tax"? Does it mean that in the pricing procedure it is picking up a condition type which is meant for state tax?
    If so go and check the condition record meant for it. Follow the following steps
    1) Go to Sales order
    2) Select the line item for which the state tax is being picked.
    3) In the condition tab select analysis.
    4) In Analysis you shall find the condition type meant for state tax.
    5) See which condition record has been found.
    6) Go to VK12, enter the state tax condition type and check the condition record for that state tax.
    7) If wrong correct it.
    8) If anything else come back to the post and inform the details
    Thanks
    Regards
    Sunil

  • How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

    This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

  • I am having problems with my burst mode on my iphone 6 plus it is slower than  the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes

    i am having problems with my burst mode on my iphone 6 plus it is slower than  the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes

    Gerald
    If you had taken time to read the Terms of Use you agreed on joining this Community today you would have realised that Apple is not here
    neither reading nor responding on this User Community
    http://www.apple.com/feedback/

Maybe you are looking for