Issue in Phase Configuration during EHP5
Hello all,
We are having ECC 6.0. onUnix. I am trying to apply EHP5 SP stack 8 by using SAPehpi installer. During the Configuration Step
I get this error:
There are dependencies between packages included into the procedure and the target release kernel.
The release of tool disp+work needs to be at least 702.
*Any idea where can I download disp+work 702..* On SAP Service Marketplace?
I did find this kernel on SAP Service Marketplace but no 702?
SAP KERNEL 7.00 64-BIT UNICODE
SAP KERNEL 7.01 64-BIT UNICODE
SAP KERNEL 7.10 64-BIT UNICODE
SAP KERNEL 7.11 64-BIT UNICODE
SAP KERNEL 7.20 64-BIT UNICODE
any idea?
Regards
Hello Sunny,
Thanks for reply,
I did continued after that, But I have this error on Check Phase:
I have this error from SAPehpi_troubleticket.log file:
SAPehpi broke during phase NTACT_CHK in module PREP_GENCHECKS / General checks
Error Message: No lines found in logfile matching 'PN......\.RSX'
Summary of SAPehpi:
SAPehpi Release: lmt_001
SAPehpi Version: 40.012
Start Release: 700
Target Release: 702
Summary of host system details:
SID: RSX
Host: sapux24
MS Host: sapux24
GW Host: sapux24
Start Path: /usr/sap/RSX/DVEBMGS02/exe
Kernel Path: /usr/sap/RSX/DVEBMGS02/exe
Summary of operating system details:
OS Type: HP-UX IA64
OS Version: 11.31
Summary of database details:
Database Type: ora
Database Version: 10.2.0.4.0
Summary of RFC details:
Host: sapux24
GW Host: sapux24
Client: 000
Destination: RSX
Language:
System No.: 02
And from NTCHK.LOG file I have :
CHKANT and RETURN CODE in PN400817.RSX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EETP399XRead table "M_DEBI ": pgntab call: table not found.
2AETP399 Table "M_DEBI ": unknown error -9
2EETP399XRead table "M_KRED ": pgntab call: table not found.
2AETP399 Table "M_KRED ": unknown error -9
2EETP399XRead table "M_MAT1 ": pgntab call: table not found.
2AETP399 Table "M_MAT1 ": unknown error -9
2EETP399XRead table "M_MEKK ": pgntab call: table not found.
2AETP399 Table "M_MEKK ": unknown error -9
2EETP399XRead table "M_ZPNR ": pgntab call: table not found.
2AETP399 Table "M_ZPNR ": unknown error -9
1 ETP111 exit code : "12"
I did check for this table on SE11, but there are not found. I
Any idea?
Edited by: Ejersbo Reza on Aug 17, 2011 1:31 PM
Similar Messages
-
Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5
Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
-1: 'startsap.exe' returned an error
See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid SID
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 150
intno 20050900
make: multithreaded, ASCII, optimized
pid 5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c 1245]
shared lib "dw_xml.dll" version 150 successfully loaded
shared lib "dw_xtc.dll" version 150 successfully loaded
shared lib "dw_stl.dll" version 150 successfully loaded
shared lib "dw_gui.dll" version 150 successfully loaded
shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01 <
DpShMCreate: sizeof(wp_adm) 22968 (1044)
DpShMCreate: sizeof(tm_adm) 3642120 (18120)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c 11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Apr 02 11:53:30 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6916 Ended no 1 0 0
1 DIA 7724 Ended no 1 0 0
2 DIA 6044 Ended no 1 0 0
3 DIA 4300 Ended no 1 0 0
4 DIA 6992 Ended no 1 0 0
5 DIA 2412 Ended no 1 0 0
6 DIA 432 Ended no 1 0 0
7 DIA 8168 Ended no 1 0 0
8 DIA 5420 Ended no 1 0 0
9 DIA 9712 Ended no 1 0 0
10 UPD 4320 Ended no 1 0 0
11 ENQ 3476 Ended no 1 0 0
12 BTC 2676 Ended no 1 0 0
13 BTC 6816 Ended no 1 0 0
14 BTC 9636 Ended no 1 0 0
15 BTC 8356 Ended no 1 0 0
16 BTC 7004 Ended no 1 0 0
17 BTC 7284 Ended no 1 0 0
18 BTC 10048 Ended no 1 0 0
19 BTC 4560 Ended no 1 0 0
20 BTC 4196 Ended no 1 0 0
21 SPO 4268 Ended no 1 0 0
Dispatcher Queue Statistics Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Apr 02 11:53:30 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01 <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c 10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
VadiHi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi -
Im having problems installing itunes in my windows 7. popup stating that there was a problem configuring during instalation
I'm having this same issue since last week but I'm running Windows 7 32 bits, any suggestion?
-
Automatic goods issue for outbound delivery, during the transfer order confirmation
Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.Hi Iiya
Check the below setting, might be helpful -
Issue with Proximity Sensor during calls - Continued v2
This thread is a continuation of Issue with Proximity Sensor during calls - Continued. which was getting too long and causing some browsers to time out. That thread has been locked and the last post links to this thread.
See also the initial thread Issue with Proximity Sensor during calls
Thank you.
Apple Discussions Hostsrbrylawski wrote:
Goflying wrote:
mbassoc2003 wrote:
I wish that were so. Then they would probably be taking prompter action. But the return rate three weeks in was substantially lower than most handsets at launch and only a quarter that of the 3GS. I suspect the return rate has remained incredibly low and the figures are further slewed down the way by the worldwide distribution that is now in the tens of millions.
At 5% return rate on a product I understand that becomes a 'significant event' that becomes declarable to shareholders, so we know they haven't reached that milestone yet.
a disclosable event is not triggered by a specific stock return level unless apple has entered into covenants re same. Suggest you take a look at sec rules for more info
Still, unless you have insider knowledge, you don't know Apple's buying them back at record numbers. You may be guessing, but you likely don't have proof....
agree. I don't have any proof whatsoever, just a strong gut feeling that all is very much not as rosy in cupertino as it might seem.
For a company whose culture is steeped in phreakery, apple is showing an amazing inability to exert control.
too many screw ups, too many loose ends, too many whacky hires, too many media backlashes - maybe the senior staff went into dumb-mode while steve was away for so long
null -
Issue with Proximity Sensor during calls - Continued.
This thread is a continuation of Issue with Proximity Sensor during calls which was getting too long and causing some browsers to time out. The old thread has been locked and the last post links to this thread.
Thank you.
Apple Discussions HostsI find it completely ludicrous that Apple can interject on this thread and say it's received too many posts and has to be shut down and a "new" thread started. Really now? Seriously? Couldn't they also simply pop in and post 'hi guys, we hear you and are working on it' ...or something to that effect? That's my main complaint really is the deafening silence. What they're basically telling us is to complain all we want, if we don't like the phone then return it for a refund ...that is if you still have your original defective phone, for all you that already swapped phones, you're beat and are stuck with our mistake for the next 2 years when you'll be upgrade eligible again. ...WOW, thanks for the statement without technically releasing one. ...I think we're all left in the dark because Apple really doesn't know what is going on with the sensor, they can't and or won't release a statement without getting the facts straight. ...but we all know one fact is straight...the sensor is dysfunctional and that alone deserves an acknowledgement. How are we to have faith in Apple to fix the issue when we're left to believe they don't think there is one.
...btw update on "my fix" ...deleting all your photos and putting the phone in your arm pit and then under your pillow is only a temporary solution, for mine sensor is on the fritz again. ...shaking my head, if only this were
funny. -
ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative
Hi Basis Expert,
while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
Hope anybody can share a bit your experience on this issue. we try search the note and find the forum but no luck.
ThanksHi,
> 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
> 2EETG011 "No shadow system""DB-connect not against shadow tables !"
>
It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
Thanks
Sunny
Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM -
Selective language import during EHP5 install
Hi,
I do not find where is defined language vector for import?
How can I change it?
The log for support package show info:
4 ETW000 language vector during export: 12345689ABCDEFGHIJKLMNOPQRSTUVWXYcd
4 ETW000 language vector during export: 12345689ABCDEFGHIJKLMNOPQRSTUVWXYcdģ© (ISO-ZHTHKOROSLHRUKETARHECSDEENFRELHUITJADAPLZFNLNOPTSKRUESTRFISVBGLTLVCASHVI)
4 ETW000 lsm during export: ALL
4 ETW000 trfunction = D (patch transport)
4 ETW000 switching to selective language import
4 ETW000 the following languages will be imported: 4DEWX .
Where is language vector 4DEWX defined?
We are on ERP 6.0 EHP4 and upgrading to EHP5.
Algimantas RaginisHi,
If I am correct parameter ZCSA/INSTALLED_LANGUAGES value is called default language vector.
But our ZCSA/INSTALLED_LANGUAGES <> 4DEWX.
Is it possible to change language vector during EHP5 install?
We have a lot custom translations, but SAP attempt to translate into Lithuanian language is ugly.
We want to exclude some SAP language translations during EHP5 install.
Algimantas Raginis -
Issue in Phase Prep_Integration/TOOLVERSION_EXE during EHP4
Hi,
We are having ECC 6.0. Currently i am in the process of trying to apply a technical usage (HCM) from Enhancement Package 4 support stack 3 for which i am using SAPehpi installer. During the Configuration Step in the phase Prep_Integration/TOOLVERSION_EXE it writes the following onto CHECKS.LOG file :
%BEGIN PREP_INTEGRATION/TOOLVERSION_EXE TEXT
ERROR: There are dependencies between packages
included into the procedure and the target
release kernel
The release of tool disp+work needs to be at
least 701.
Please retrieve the new tools and put the archives
to the download directory. This is described in the
documentation chapter "Preparation" section
"Filling the Download Directory".
Due to which at the end of configuration step after finishing all phases it comes out with the above error. I downloaded the latest Kernel as well as tried downloading the latest dw.sar file to 701 version unicode and copied over to download directory but still same error keeps coming.
Anyone has encountered this error before and if so kindly help me on this.
Thanks,
Murali.This is what in my case:
ETQ399 Determining all tool versions in directory '/usr/sap/software/EHP4/EHPI/abap/exe':
4 ETQ399 2009/06/17 14:53:43: put_execute: (disp+work) forkpid:950412
2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_REL = '700'
2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_64BIT = 'ON'
2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_UNICODE = 'ON'
2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_DATE = 'Nov 18 2008 21:27:59'
2 ETQ399 TOOL-VERSION 'disp+work': EXE_DISPWORK_PATCHNUM = '185'
4 ETQ399 2009/06/17 14:53:43: put_execute: (tp) forkpid:950414
2 ETQ399 TOOL-VERSION 'tp': EXE_TP_VERSION = '372.04.40'
2 ETQ399 TOOL-VERSION 'tp': EXE_TP_REL = '700'
2 ETQ399 TOOL-VERSION 'tp': EXE_TP_PATCHNUM = '179'
4 ETQ399 2009/06/17 14:53:43: put_execute: (R3trans) forkpid:950416
2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_VERSION = '6.14'
2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_REL = '701'
2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_DATE = '20.04.09'
2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_PATCHNUM = '44'
4 ETQ399 2009/06/17 14:53:44: put_execute: (R3load) forkpid:950418
2 ETQ399 TOOL-VERSION 'R3load': EXE_R3LOAD_REL = '7.00'
2 ETQ399 TOOL-VERSION 'R3load': EXE_R3LOAD_VERSION = '1.4 [UNICODE]'
1 ETQ399 Determining all tool versions in directory '/usr/sap/software/EHP4/EHPI/abap/exenew':
4 ETQ399 2009/06/17 14:53:44: put_execute: (disp+work) forkpid:950420
4 ETQ399 2009/06/17 14:53:44: put_execute: (tp) forkpid:950422
2 ETQ399 TOOL-VERSION 'tp': NEW_TP_VERSION = '372.04.57'
2 ETQ399 TOOL-VERSION 'tp': NEW_TP_REL = '701'
2 ETQ399 TOOL-VERSION 'tp': NEW_TP_PATCHNUM = '37'
4 ETQ399 2009/06/17 14:53:44: put_execute: (R3trans) forkpid:950424
2 ETQ399 TOOL-VERSION 'R3trans': NEW_R3TRANS_VERSION = '6.14'
2 ETQ399 TOOL-VERSION 'R3trans': NEW_R3TRANS_REL = '701'
2 ETQ399 TOOL-VERSION 'R3trans': NEW_R3TRANS_DATE = '20.04.09'
2 ETQ399 TOOL-VERSION 'R3trans': NEW_R3TRANS_PATCHNUM = '44'
4 ETQ399 2009/06/17 14:53:44: put_execute: (R3load) forkpid:950426
2 ETQ399 TOOL-VERSION 'R3load': NEW_R3LOAD_REL = '7.01'
2 ETQ399 TOOL-VERSION 'R3load': NEW_R3LOAD_VERSION = '1.4 [UNICODE]'
2 ETQ399 # Map request variable 'EXE_R3TRANS_REL' to 'NEW_R3TRANS_REL'
2 ETQ399 # Map request variable 'EXE_R3TRANS_DATE' to 'NEW_R3TRANS_DATE'
1 ETQ399 Comparing DATE '05.03.09' '20.04.09' -> -115
2 ETQ399 # Map request variable 'DISPWORK_REL' to 'NEW_DISPWORK_REL'
1 ETQ207 Executing post-phase DB specific actions.
1 ETQ207 Executing post-phase OS specific actions.
4 ETQ010 Date & Time: 20090617145345
Based on the above you can see it is checking for disp+work from exe dir which is 700 and leter it is mapping 'DISPWORK_REL' to 'NEW_DISPWORK_REL' which is what my issue.....
If i extract the 701 dw.sar manually on the exe directory and run the installation the following is the output:
ETQ399 Determining all tool versions in directory '/usr/sap/software/EHP4/EHPI/abap/exe':
4 ETQ399 2009/06/17 16:13:10: put_execute: (disp+work) forkpid:3190962
4 ETQ399 2009/06/17 16:13:10: put_execute: (tp) forkpid:3190964
2 ETQ399 TOOL-VERSION 'tp': EXE_TP_VERSION = '372.04.40'
2 ETQ399 TOOL-VERSION 'tp': EXE_TP_REL = '700'
2 ETQ399 TOOL-VERSION 'tp': EXE_TP_PATCHNUM = '179'
4 ETQ399 2009/06/17 16:13:11: put_execute: (R3trans) forkpid:3190966
2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_VERSION = '6.14'
2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_REL = '701'
2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_DATE = '20.04.09'
2 ETQ399 TOOL-VERSION 'R3trans': EXE_R3TRANS_PATCHNUM = '44'
4 ETQ399 2009/06/17 16:13:11: put_execute: (R3load) forkpid:3190968
2 ETQ399 TOOL-VERSION 'R3load': EXE_R3LOAD_REL = '7.00'
2 ETQ399 TOOL-VERSION 'R3load': EXE_R3LOAD_VERSION = '1.4 [UNICODE]'
1 ETQ399 Determining all tool versions in directory '/usr/sap/software/EHP4/EHPI/abap/exenew':
4 ETQ399 2009/06/17 16:13:11: put_execute: (disp+work) forkpid:3190970
4 ETQ399 2009/06/17 16:13:11: put_execute: (tp) forkpid:1220664
2 ETQ399 TOOL-VERSION 'tp': NEW_TP_VERSION = '372.04.57'
2 ETQ399 TOOL-VERSION 'tp': NEW_TP_REL = '701'
2 ETQ399 TOOL-VERSION 'tp': NEW_TP_PATCHNUM = '37'
4 ETQ399 2009/06/17 16:13:12: put_execute: (R3trans) forkpid:1220666
2 ETQ399 TOOL-VERSION 'R3trans': NEW_R3TRANS_VERSION = '6.14'
2 ETQ399 TOOL-VERSION 'R3trans': NEW_R3TRANS_REL = '701'
2 ETQ399 TOOL-VERSION 'R3trans': NEW_R3TRANS_DATE = '20.04.09'
2 ETQ399 TOOL-VERSION 'R3trans': NEW_R3TRANS_PATCHNUM = '44'
4 ETQ399 2009/06/17 16:13:12: put_execute: (R3load) forkpid:1220668
2 ETQ399 TOOL-VERSION 'R3load': NEW_R3LOAD_REL = '7.01'
2 ETQ399 TOOL-VERSION 'R3load': NEW_R3LOAD_VERSION = '1.4 [UNICODE]'
2 ETQ399 # Map request variable 'EXE_R3TRANS_REL' to 'NEW_R3TRANS_REL'
2 ETQ399 # Map request variable 'EXE_R3TRANS_DATE' to 'NEW_R3TRANS_DATE'
1 ETQ399 Comparing DATE '05.03.09' '20.04.09' -> -115
2 ETQ399 # Map request variable 'DISPWORK_REL' to 'NEW_DISPWORK_REL'
1 ETQ207 Executing post-phase DB specific actions.
1 ETQ207 Executing post-phase OS specific actions.
Here you can see it is not even showing any version for disp+work from exe directory.
Thanks,
Murali. -
ChaRM Project Phases - configuring what can be done during phases
Hi
This is a pretty simple question.
Where do I change what actions can be completed during phases?
For example, a ZMCR for a Maintenance Project can be created in Development with Release phase but it cannot be created in Go-Live phase.
Where do I view this configuration?
I used to know but I can't remember
I went into transaction SM34 and accessed /TMWFLOW/VC_PHMD but this is more for lower level actions (i.e. releasing transports). I'm looking for transaction type status (i.e ZMMJ can be changed to this status in these phases).
Cheers
ShaunHi Shaun,
For Maintenance cycle phase details check the Dolores blogs show below it will giv clear details
Change Request Management scenario: Working examples “Development without Release” phase
Change Request Management scenario: Working examples “Development with Release” phase
Change Request Management scenario: Working examples “Test” phase
All blog in the below link :
http://scn.sap.com/people/dolores.correa/blog
Rg,
Karthik -
Issue with RFC destination during HCM - VDS - IDM configuration
Hi,
I am trying to configure HCM and IDM (v7.1) using VDS. I am following the Configuration Guide. While creating the RFC Destination, I specified program ID as LDAP_VD and in Gatewayhost I have entered the host of IDM Server (where VDS is also installed). In Gateway service I have put sapgw00. But when I do connection test, I get u201CERROR: SAP gateway connection failed. Is SAP gateway started?u201D. Looks like it is trying to connect to IDM server and is looking for sapgw00 (on port 3300) and is not able to find it.
What could be the reason for error? Am I doing RFC destination configuration correct? Do I need to put HCM system host in the Gatewayhost field?
Regards,
AnuragHi Anurag
You have to enter the hostname of the SAP server, not the LDAP server.
The LDAP connection is configured later. -
SUM issue with XSS components during maintenance on NDWI controlled landscape
Hello,
This is our first time using SUM/MOpz for a release upgrade procedure as the last JSPM update disabled the launch program.
During our test upgrade of our Enterprise Portal HUB landscape (source NW 7.02 -> target NW 7.4) with EHP5 for ERP 6.0 - XSS Self Services for backend ERP system installed. I've encountered an issue with SUM in the Configuration stage - Target Release Components screen. the only 5 objects SUM cannot handle automatically are the XSS Self Services target release components:
SAPPCUI_GP 633
SAP_ESS 633
SAP_ESS_LGP 633
SAP_MSS 630
UTXSSLGP 633
The only option I have is to scan inbox to rebuild the component list. I'm assuming, since these components are being modified by us and delivered/deployed thru NWDI track, their source location on the system is now the track name instead of the SAP delivered MAIN_ERP53VAL_C. Which means that SUM is expecting updated modified SCAs from NWDI for new 633 versions in the download directory before proceeding to next phase. However, in NWDI landscape configurator for this track, I have checked the option to mark system in NWDI control and verified SUM recognizes the system as NWDI controlled.
I'm struggling to understand the where the disconnect is between SUM and NWDI for theses components as I thought that SUM is supposed to ignore the DEV NWDI developed and wait for updates modified SCAs only in QA and PROD. Does anyone else have experience with this process to help me?
Regards,
PaulHi Paul,
We are facing the same issue although we can see in the process Overview of SUM that the system is not ticked as under NWDI Control.
But we are facing problem only for SAP ESS and SAP MSS not other components. Other three components are coming up fine and ready for deployment. This is due to the issue that only these components are identified in the BUILD COMPONENT LIST UPGRADE step as modified.
Detailed checking of the logs led us to errors identical to the KBA 2034886 - Error: Dialog eliminator ConfirmComponentsDialogEliminator does not allow to omit dialog ConfirmComponents
The system should get picked as under NWDI control and following all steps of the upgrade for NWDI driven system landscapes
Thanks and Regards,
Karan Shah
Message was edited by: Karan Shah -
"Storage is not configured" during failover - COH-1467 still not fixed?
I am runing a test program using two cache nodes and one "client JVM", all on the same machine (the first cache node is used as WKA). When I kill one of the cache nodes and the restart it again I get the following exceptions:
In the surviving cache node:
2009-01-22 08:01:14.753/112.718 Oracle Coherence GE 3.4.1/407 <Error> (thread=DistributedCache, member=1): An exception (java.lang.ClassCastException) occurred reading Message AggregateFilterRequest Type=31 for Service=DistributedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
2009-01-22 08:01:14.753/112.718 Oracle Coherence GE 3.4.1/407 <Error> (thread=DistributedCache, member=1): Terminating DistributedCache due to unhandled exception: java.lang.ClassCastException
2009-01-22 08:01:14.753/112.718 Oracle Coherence GE 3.4.1/407 <Error> (thread=DistributedCache, member=1):
java.lang.ClassCastException: java.lang.Long
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$AggregateFilterRequest.read(DistributedCache.CDB:8)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:117)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:37)
at java.lang.Thread.run(Thread.java:619)
On the restarted cache node:
2009-01-22 08:01:15.722/2.220 Oracle Coherence GE 3.4.1/407 <Info> (thread=Main Thread, member=n/a): Loaded cache configuration from resource "file:/C:/Javaproj/Query/lib/master-coherence-cache-config.xml"
2009-01-22 08:01:16.565/3.063 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
2009-01-22 08:01:16.628/3.126 Oracle Coherence GE 3.4.1/407 <Info> (thread=Cluster, member=n/a): Failed to satisfy the variance: allowed=16, actual=31
2009-01-22 08:01:16.628/3.126 Oracle Coherence GE 3.4.1/407 <Info> (thread=Cluster, member=n/a): Increasing allowable variance to 17
2009-01-22 08:01:17.003/3.501 Oracle Coherence GE 3.4.1/407 <Info> (thread=Cluster, member=n/a): This Member(Id=5, Timestamp=2009-01-22 08:01:16.768, Address=138.106.109.121:54101, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22728, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster with senior Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1)
2009-01-22 08:01:17.065/3.563 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member(Id=4, Timestamp=2009-01-22 08:00:35.566, Address=138.106.109.121:8088, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:11544) joined Cluster with senior member 1
2009-01-22 08:01:17.081/3.579 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Management with senior member 1
2009-01-22 08:01:17.081/3.579 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 1 joined Service InvocationService with senior member 1
2009-01-22 08:01:17.081/3.579 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCacheNoBackup with senior member 1
2009-01-22 08:01:17.097/3.595 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 4 joined Service InvocationService with senior member 1
2009-01-22 08:01:17.097/3.595 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 4 joined Service DistributedCache with senior member 4
2009-01-22 08:01:17.222/3.720 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): TcpRing: connecting to member 4 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/138.106.109.121,port=8088,localport=3609]}
2009-01-22 08:01:17.253/3.751 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:Management, member=5): Service Management joined the cluster with senior service member 1
2009-01-22 08:01:17.393/3.891 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:InvocationService, member=5): Service InvocationService joined the cluster with senior service member 1
2009-01-22 08:01:18.643/5.141 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
2009-01-22 08:01:19.050/5.548 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
2009-01-22 08:01:23.659/10.157 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
2009-01-22 08:01:24.284/10.782 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
2009-01-22 08:01:28.674/15.172 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
2009-01-22 08:01:29.503/16.001 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
2009-01-22 08:01:33.674/20.172 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
2009-01-22 08:01:33.721/20.219 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
2009-01-22 08:01:38.674/25.172 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
2009-01-22 08:01:38.956/25.454 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
2009-01-22 08:01:43.690/30.188 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
2009-01-22 08:01:44.174/30.672 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <Error> (thread=Main Thread, member=5): Error while starting service "InvocationService": com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=2, Name=InvocationService, Type=Invocation
MemberSet=ServiceMemberSet(
OldestMember=Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
ActualMemberSet=MemberSet(Size=3, BitSetCount=2
Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
Member(Id=4, Timestamp=2009-01-22 08:00:35.566, Address=138.106.109.121:8088, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:11544)
Member(Id=5, Timestamp=2009-01-22 08:01:16.768, Address=138.106.109.121:54101, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22728)
MemberId/ServiceVersion/ServiceJoined/ServiceLeaving
1/3.1/Thu Jan 22 07:59:27 CET 2009/false,
4/3.1/Thu Jan 22 08:00:36 CET 2009/false,
5/3.1/Thu Jan 22 08:01:17 CET 2009/false
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:27)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:38)
at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:28)
at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:841)
at com.tangosol.net.DefaultCacheServer.start(DefaultCacheServer.java:140)
at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:61)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:90)
Exception in thread "Main Thread" com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=2, Name=InvocationService, Type=Invocation
MemberSet=ServiceMemberSet(
OldestMember=Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
ActualMemberSet=MemberSet(Size=3, BitSetCount=2
Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
Member(Id=4, Timestamp=2009-01-22 08:00:35.566, Address=138.106.109.121:8088, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:11544)
Member(Id=5, Timestamp=2009-01-22 08:01:16.768, Address=138.106.109.121:54101, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22728)
MemberId/ServiceVersion/ServiceJoined/ServiceLeaving
1/3.1/Thu Jan 22 07:59:27 CET 2009/false,
4/3.1/Thu Jan 22 08:00:36 CET 2009/false,
5/3.1/Thu Jan 22 08:01:17 CET 2009/false
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:27)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:38)
at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:28)
at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:841)
at com.tangosol.net.DefaultCacheServer.start(DefaultCacheServer.java:140)
at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:61)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:90)
2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <Error> (thread=Invocation:InvocationService, member=5): validatePolls: This service timed-out due to unanswered handshake request. Manual intervention is required to stop the members that have not responded to this Poll
PollId=1, active
InitTimeMillis=1232607677393
Service=InvocationService (2)
RespondedMemberSet=[1]
LeftMemberSet=[]
RemainingMemberSet=[4]
2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:InvocationService, member=5): Service InvocationService left the cluster
2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <D4> (thread=ShutdownHook, member=5): ShutdownHook: stopping cluster node
Process finished with exit code 1
On the client JVM:
2009-01-22 08:01:14.815/41.265 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:InvocationService, member=4): Repeating AggregateFilterRequest due to the re-distribution of PartitionSet[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127]
java.lang.RuntimeException: Storage is not configured
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissingStorage(DistributedCache.CDB:9)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureRequestTarget(DistributedCache.CDB:33)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.sendPartitionedRequest(DistributedCache.CDB:31)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.aggregate(DistributedCache.CDB:11)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.aggregate(DistributedCache.CDB:52)
at com.tangosol.coherence.component.util.SafeNamedCache.aggregate(SafeNamedCache.CDB:1)
at com.tangosol.net.cache.NearCache.aggregate(NearCache.java:453)
at com.scania.oas.coherence.invocables.ValueQueryInvocable.typeSearch(ValueQueryInvocable.java:260)
at com.scania.oas.coherence.invocables.ValueQueryInvocable.queryStringFirstSearch(ValueQueryInvocable.java:300)
at com.scania.oas.coherence.invocables.ValueQueryInvocable.run(ValueQueryInvocable.java:135)
at com.scania.oas.coherence.invocables.InvocableWrapper.run(InvocableWrapper.java:54)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService.onInvocationRequest(InvocationService.CDB:10)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService$InvocationRequest.onReceived(InvocationService.CDB:40)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:130)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:37)
at java.lang.Thread.run(Thread.java:619)
java.lang.RuntimeException: Storage is not configured
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissingStorage(DistributedCache.CDB:9)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureRequestTarget(DistributedCache.CDB:33)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.sendPartitionedRequest(DistributedCache.CDB:31)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.aggregate(DistributedCache.CDB:11)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.aggregate(DistributedCache.CDB:52)
at com.tangosol.coherence.component.util.SafeNamedCache.aggregate(SafeNamedCache.CDB:1)
at com.tangosol.net.cache.NearCache.aggregate(NearCache.java:453)
at com.scania.oas.coherence.invocables.ValueQueryInvocable.queryStringSearch(ValueQueryInvocable.java:268)
at com.scania.oas.coherence.invocables.ValueQueryInvocable.queryStringFirstSearch(ValueQueryInvocable.java:297)
at com.scania.oas.coherence.invocables.ValueQueryInvocable.run(ValueQueryInvocable.java:135)
at com.scania.oas.coherence.invocables.InvocableWrapper.run(InvocableWrapper.java:54)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService.onInvocationRequest(InvocationService.CDB:10)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService$InvocationRequest.onReceived(InvocationService.CDB:40)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:130)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:37)
at java.lang.Thread.run(Thread.java:619)
I even tried to re-write the "run method" in tthe invocable in a way that caused it to, in a loop, perform a delay and then re-try its calculations when it received a runtime exception with the text "Storage is not configured" causing the retreival a new named cache each time but this did not help - it never seemed to recover...
Since I dont see any of my application classes in the "class cast" trace-back I assume it is an Coherence internal problem or can you thiink about some user programming error that could cause it? I am by the way not using any long or "Long in my application...
Best Regards
MagnusHi Magnus,
The log you provided seems to indicate that the problem was caused by the de-serialization of the “AggregateFilterRequest” message. The only explanation we have is that you are using a custom Filter that has asymmetrical serialization/deserialization routines, causing this failure. Could you please send us the corresponding client code?
Meanwhile, we will open a JIRA issue, to make sure that Coherence handles this kind of error more gracefully.
-David -
SUM issue at phase specify Credentials on PI7.4 dual STACK
Hello SAP,
We are planning to apply SFTP addon using SUM .
We are getting error at phase - specify Credentials
Pls check the below error log.
An error has occurred during the execution of the Determine system release step.
You can find more information in the file
To troubleshoot the problem use the provided information. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following keywords:
DETECT input_credentials input-credentials-dialog determine-engine-release com.sap.sdt.j2ee.services.servicesimpl.EngineInfoService class com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetectionException
VERSION_ACTION_VERSION_NULL_16.ERR:
/usr/sap/SID/DVEBMGS00/j2ee/cluster/bootstrap/scripts/version.sh[10]: /usr/sap/SID/DVEBMGS00/j2ee/cluster/bootstrap/scripts/launcher.sh: cannot execute
TroubleTicket_16.txt:
Trouble Ticket Report
Update to n/a
SID................: n/a
Hostname...........: n/a
Install directory..: /usr/sap/SID
SUM directory......: /SUM/sdt
Database...........: n/a
Operating System...: UNX
JDK version........: 1.6.0_81 SAP AG
SUM version........: 1.0.11.1
Source release.....: n/a
Target release.....: n/a
ABAP stack present.: true
An error has occurred during the execution of the Determine system release step with action input_credentials. Service com.sap.sdt.j2ee.services.servicesimpl.EngineInfoService failed with the following message:
Could not detect AS Java release.
You can find more information in the files /SUM/sdt/log/SUM/DETERMINE-ENGINE-RELEASE_16.LOG and ProcessOverview.html.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
DETECT,input_credentials,input-credentials-dialog,determine-engine-release,com.sap.sdt.j2ee.services.servicesimpl.EngineInfoService,class com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetectionException
DETERMINE-ENGINE-RELEASE_16.LOG:
<!--LOGHEADER[START]/-->
<!--HELP[Manual modification of the header may cause parsing problem!]/-->
<!--LOGGINGVERSION[2.0.7.1006]/-->
<!--NAME[/SUM/sdt/log/SUM/DETERMINE-ENGINE-RELEASE_16.LOG]/-->
<!--PATTERN[DETERMINE-ENGINE-RELEASE_16.LOG]/-->
<!--FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%6s]: %m)]/-->
<!--ENCODING[UTF8]/-->
<!--LOGHEADER[END]/-->
Jul 31, 2014 12:18:05 AM [Info ]: Checking AS Java release using version command.
Jul 31, 2014 12:18:05 AM [Info ]: The tool have been found in location /usr/sap/SID/DVEBMGS00/j2ee/cluster/bootstrap/scripts/version.sh.
Jul 31, 2014 12:18:05 AM [Info ]: Process ID 339, name /usr/sap/SID/DVEBMGS00/j2ee/cluster/bootstrap/scripts/version.sh has been started.
Jul 31, 2014 12:18:05 AM [Info ]: Command line: /usr/sap/SID/DVEBMGS00/j2ee/cluster/bootstrap/scripts/version.sh
Jul 31, 2014 12:18:05 AM [Info ]: Standard out: /SUM/sdt/log/SUM/VERSION_ACTION_VERSION_NULL_16.OUT
Jul 31, 2014 12:18:05 AM [Info ]: Process ID 339 has been started.
Jul 31, 2014 12:18:05 AM [Info ]: Waiting for process ID 339, name /usr/sap/SID/DVEBMGS00/j2ee/cluster/bootstrap/scripts/version.sh to finish.
Jul 31, 2014 12:18:05 AM [Info ]: Process ID 339, name /usr/sap/SID/DVEBMGS00/j2ee/cluster/bootstrap/scripts/version.sh has been finished, exit code 126.
Jul 31, 2014 12:18:05 AM [Error ]: The following problem has occurred during step execution: com.sap.sdt.j2ee.tools.releasedetection.EngineReleaseDetectionException: Could not detect AS Java release.
Return code condition success evaluated to false for process /usr/sap/SID/DVEBMGS00/j2ee/cluster/bootstrap/scripts/version.sh for action ACTION_VERSION.This is part one from the above note:
I. Change configuration for web methods protection to DEFAULT and restart:
1. Open for edit DEAFULT.PLF file from /usr/sap/(SID)/SYS/profile and set configuration:
service/protectedwebmethods = DEFAULT
2. Restart the cluster including sapstartsrv OS service:
2.1. For windows you can execute with administrator privileges following command to stop the services:
c:\> sc stop SAP[SID]_[Instance_Number]
c:\> sc stop SAP[SID]_[SCS_Instance_Number]
c:\> sc start SAP[SID]_[SCS_Instance_Number]
c:\> sc start SAP[SID]_[Instance_Number]
(SAP MMC could automatically start the services, in this case start command will produce warning "An instance of the service is already running.")
2.2. For Linux/Unix you can use stopsap/startsap commands without parameters (more info is available here : http://help.sap.com/saphelp_nwpi71/helpdata/en/47/1d6feeff6e0d46e10000000a155369/content.htm).
3. Retry update procedure step.
4. After upgrade has finished you can restore the settings in the DEFAULT.PFL profile and restart the instance and services
.Set service/protectedwebmethods = DEFAULT in default profile
stopsap -i DVEBMGS<nn>
stopsap -i SCS<nn>
startsap -i SCS<nn>
startsap -i DVEBMGS<nn>
where <nn> is your instance number
Retry failed step again.
Divyanshu -
During EHP5 Upgrade some screens for infotypes are deleted
Hi,
During the EHP5 Upgrade, we found some of the screens of infotypes got deleted. Those screen numbers are <9000. Any guessess on why these screens deleted? Is it becoz of SAP reserved namespace or any other reason? What should be best solution to make sure that these screens are not deleted while upgrade?
Regards
SravanDear Sravan,
Regarding this issue i would suggest you to create an OSS message with us with the R/3 connection to the system opened.
Regards,
Abhishek
Maybe you are looking for
-
Can't get the DVI to VGA adapter off my mini
I have my Intel Core Solo Mini listed on eBay, and the one problem I have is that when I put the VGA adapter on (the Apple included one) i apparently cranked it down too tight and I can't get it off. For 99% of the customers that wouldn't be problema
-
J2EE Filter for /irj application
Hi, i developed a J2EE Filter for irj application but i am getting some problem: 1) The irj application cannot load the J2EE Filter; it throws a ClassNotFoundException. I think that the problem is linked with a ClassPath/ClassLoader issue. 2) I d
-
Fellas, Ive heard some werid crap happeniing with their gamers club unlocked $30/2 year renewal promotion. heres my story: after 4 hours, i finally got it redeemed. i verified i was unlocked with 3 different reps because each time i tried to make an
-
Where did the Photoshop CC Object Model info go?
I've been using ExtendScript Toolkit CC with Photoshop CC 2014 without issue for some time now, but yesterday all of the reference information for Photoshop CC 2014, and several other programs, disappeared from the Object Model Viewer. Does anyone kn
-
Hi I am facing one problem. In my report i need to change chart order series group sorting by report parameter value. Is it impossible? thanx in advence.