Issue in posting GR in background task for inbound deliveries.

when tried to do Good receipt in batch/background processing for inbound deliveries through std. posting module 'IDOC_INPUT_DLVRY', getting sap abend message as 'Risk of posting several mat.documents for one delivery->long text' VL 621 MESSAGE TYPE A.
But there is no duplicate material documents other than one which would get created when posting GR.
I looked at oss notes 117104, it seems to be cannot be implemented and is found to be suitable for 46a,46b wheras, i am looking for ECC 6.0 release.
Suggest pls.
Thanks,
Madhan.

Can this link help you? Control Delivery's Save - if condition is not meat.
Regards,

Similar Messages

  • Can I turn off the background task for HERE Drive+...

    Hello,
    I have installed on my new Lumia 1020 the application HERE Drive+ and I have noticed that it starts up a background task. Since I'm not using HERE Drive+ on a daily basis I think I could save some battery if I turn off this background task and it is started automatically only when I'm using Drive+ application. Can I do that?
    I went to Settings->Applications->Background tasks and tried to block HERE Drive+. So far so good but when I tried to set to ON (checked) the option "Turn background tasks back on for this app the next time I open it", HERE Drive+ application was automatically unblocked. Is this normal?
    I want to know if I can stop the background task for HERE Drive+ and have it automatically started up when I open HERE Drive+ application.
    Thank you.
    Cosmin Petrenciuc
    Solved!
    Go to Solution.

    It may be something I missunderstand. So if I go to Settings->Application->Background tasks and tap the button "Advanced" I see a list with many applications, and among them there is HERE Drive+. Above this list it is written "These apps can run in the background, and you may not be able to block all of them".
    Does this just means that HERE Drive+ application is allowed to run in the background? Do I see in this window the list of all background tasks currently running or it is just a list with the application that could run in background?
    Right now I don't have any application running. If I keep pressing on back button the app card list is empty.
    Thank you.
    Cosmin Petrenciuc

  • WMTA - Output type for Inbound Deliveries

    I am looking at the output control requirement in WMTA for Inbound Deliveries by considering vendor address
    Scenario:
    Domestic Vendors : Trigger WMTA (ie send immediately) as soon as Inbound Delivery
    is created
    and
    International Vendors: Same Output Type WMTA but  (ie send with application own transaction)
    ie at the time of putaway they change to send immediately and that  creates TO.
    Is this scenario possible with one outtype (WMTA) ie create TO immediately for domestic deliveries and not for International deliveries ie trigger wmta by going to change mode in inbound delivery.
    Please advice
    Thank You
    Thirumal Reddy

    Hello rao,
    Right now they dont have any diffrences between vendors and they manually decid e them.
    Is it possible to create two confirmational control keys ie 0001 and 0004 for domestic and international vendors in creating inbound deliveries.
    and attached them in conditional table and acess seq.
    please advice.
    Thank you
    Thirumal.

  • Shipping point for inbound deliveries

    Hi All,
    Please advice on two different sub points listed below.
    1.  How to assign XXXX shipping point for inbound deliveries for newly created locations.
    2.  How to create partner storage location
    Kindly provide SPRO path
    Thanks
    Michael

    Moderator message: Basic frequently asked question - Please search forum for answers and read the docu in help.sap.com 
    See as well our rules of engagement: http://scn.sap.com/docs/DOC-18590
    A good way to search the forum is with google. See this blog with details for a good search
    http://scn.sap.com/community/support/blog/2012/04/16/getting-the-most-out-of-google-optimizing-your-search-queries
    The discussions are not a replacement for proper training
    This blog describes how to use the SCN search: http://scn.sap.com/community/about/blog/2012/12/04/how-to-use-scn-search
    Thread locked

  • Field Selection for Inbound Deliveries?

    Hi SAP Gurus!
    Good day! During Creation and changing of Inbound Deliveries (VL31N or VL32N), how can I change the field for Movement Type into Optional? I can't find any Field Selection for Inbound Deliveries in IMG. How will I do this? Please help.
    Thank you.
    Mik

    i believe u need to modify the delivery item category for the inbound delivery as system fetches the movement type from there and if u do not want to make use of the movement type then it means there is no requirement of good reciept
    so make use of some delivery item categoy  in which putway is not relevant

  • Background task for WP 8.1

    Hi all.
    I added new project into solution. I created and registered background task. App1.Shared contains shared code. But I can't use it in new project with Background Task.
    I tried to create background task into App1.Shared, but my app is crashing when trigger is activated.
    How can I get access to shared code from project with background task?

    Hi Pizhon,
    >>How can I get access to shared code from project with background task?
    You need to create a Windows Runtime Component for your solution and implement Background tasks in it, in Store or WP project, create different register procedure to make it works.
    I would suggest you checking this official sample:
    https://code.msdn.microsoft.com/windowsapps/Background-Task-Sample-9209ade9
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Automatic TO Creation for Inbound Deliveries

    I would like to have TO created automatically for Inbound delivery for PO.
    1)  I have set the Automatic TO = A in Mvmt Type 101 for my warehouse in transaction OMKZ. 
    2)  I have set Immediate TO Creation and Mail Control = A for Mvmt Type 101, Mvmt Indicator =B, Mvmt Type 101, TR Create =X for my warehouse in transaction OMKX
    3)  I have assigned Routine #32 to Application E1 in transaction VOFM
    4)  I have created output conditon WMTA for delivery type EL with Medium =8 and Date/Time =4.
    Tranfer order is not created when the delivery is created via transaction VL34.  The output determination analysis indicates that WMTA was ignored because requirement 032 not fulfilled.  What am I missing?
    Thank you.

    Hi Julie Simonds
    I believe you are working with Inbound delivery with Item catagory as ELN.
    Please check if Relevant for putaway is checked.
    Path for your refernce :
    SPRO > LE > Shipping > Deliveries > Define Item catagory for deliveries.
    Thanks,
    Mahesh

  • GPS Collection in Background task for Windows phone 8.1 ?

     
     I don't know some best and good features were  complicated  in Windows Phone 8.1 when compare to Windows Phone 8 ,
    1 ) Simple Camera option makes it Complicated in Windows Phone 8.1 , no preview option ?
    2) Background GPS Collection is not working in Windows Phone 8.1 , In my case i need to collect GPS in short time interval ( 1 or 2 mins ) But Windows phone 8.1  support Timer Triggers for 30 mins in Back ground Task .
    3) Zxing is works good and gives robust out put . it is not supported in windows phone 8.1 takes too much time intervals and giving false data output .
    4) Need to maintain same installation (XAP/APPX ) file for all version of Windows Phone because end user makes ambiguity to use old and new version installation .  
    Thanks to Help ,
    Please provide make sure answers for the 2 and 3 .
    Venugopal

    My Client mentioned our application needs to works on Windows phone 8.1 and above .
    Xap file can not run in Windows phone 8.1 so we need to develop Windows phone 8.1 (Appx).
    So existed and simple things are made complicated in Windows phone 8.1  .
    Please suggest answers for these :-
    1) Background GPS Collection is not working in Windows Phone 8.1 , In my case i need to collect GPS in short time interval ( 1 or 2 mins ) But Windows phone 8.1  support Timer Triggers for 30 mins in Back ground Task .
    2) Zxing is works good and gives robust out put . it is not supported in windows phone 8.1 takes too much time intervals and giving false data output .
    Venugopal

  • Step 1; File Share   DVD; Sharing screen appears, click "share"; view background taski for up 2 1-hour; error message appears "Quick time error 0"

    I still don't understand why I get this error message; quicktime error 0

    Pwscott wrote:
    10. Update the video card driver.
    check, latest Nvidia GeFroce9500GT driver installed, also tried previous version, no effect
    After installing recent nvidia drivers you should then uninstall the nvidia stereoscopic 3D driver from Control Panel> Uninstall a Program. This has a known conflict with APE.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Tracking Number for Inbound Deliveries

    We are trying to get ASNs from our suppliers for their shipments. We would like to capture the carrier tracking number (e.g. the Fedex number) from the supplier. I'm using segment E1EDL47-TRACKN in the DELVRY03.DESADV idoc. I'm not able to get the tracking number in this segment to populate into the inbound delivery.
    Does anyone have any experience here? Are there some pre-requisites or config that I'm missing? Can anyone point me in the right direction?
    Thanks

    Thank you for the help...I think we are getting closer with the FM you mentioned. Let me provide some further information on this....we are using the FM IDOC_INPUT_DESADV1 which states the following for E1EDL47 and 48 (still not too sure which we have to use). Not too sure where to go from here to decipher what is currently being used. Any further direction would be helpful
      express ship interface - delivery --> t_vlbldlgn
          WHEN 'E1EDL47'.
            PERFORM at_vlbl USING idoc_data s_dl20-vbeln space.
          WHEN 'E1EDL48'.
            PERFORM at_vlbl USING idoc_data s_dl20-vbeln space.
    Clicking on at_vlbl LV55KF04
    FORM at_vlbl USING    p_edidd           STRUCTURE edidd
                          p_rfbel           LIKE      likp-vbeln
                          p_exidv           LIKE      vekp-exidv.
      STATICS: l_xsitd     TYPE xsitd.
      STATICS: l_xsitd_ext TYPE xsitd,
               s_spdnr     TYPE spdnr,
               s_vbtyp     TYPE vbtyp,
               s_vbeln     TYPE vbeln.
      STATICS: l_xsitd_rc  LIKE sy-subrc.
        0.. ok
        4.. not unique -->gn_delivery_create
        8.. not found
      DATA: l_xsitd_test       TYPE xsitd.
      DATA: l_xsitd_domestic   TYPE xsitd.
      DATA: l_xsitd_export     TYPE xsitd.
      DATA: l_e1edl47   LIKE e1edl47.
      DATA: l_e1edl48   LIKE e1edl48.
      DATA: l_e1edl49   LIKE e1edl49.
      DATA: l_e1edl50   LIKE e1edl50.
      DATA: l_vlbltd    LIKE vlbltd.

  • Business Content Extractors for Inbound Deliveries (again!!!)

    Dear all,
    although we had the same question already in january, but as there was no solution at all, I have to ask the question how I'm able to extract <b>in</b>bound deliveries to BW. They are stored in LIKP/LIPS, but somehow the standard extractor 2LIS_12_* filter the corresponding document types.
    Thanks for your help,
    Andreas

    Hi Andreas,
    Have you tried by using R/3 LIS Structures (those named SXXX). You can try checking if you have anyone that is useful or you can create a new one and see in R/3 if it gets the information you need. Maybe you'll need help of an SD consultant. The transaction used to create those structures is MC21.
    Then you will need to create the datasource by using transaction LBW0.
    Hope this helps.
    Regards,
    Diego Lombardini

  • Shipment cost for inbound deliveries

    HI ALL,
    pls can anyone tell me how to transfer or add the frieht cost calculated during the inbound shipment to the material cost(inventory costing).
    how is it doneand in which transaction it is done
    pls ASASP
    thanks in advance

    Hi Vijay
    You have to follow few mm and transportation module configuration settings: These are
    1. In MM Pricing condition types: The freight condition type need to check, that is the option called Copy Shipment costs in MM Freight condition types(FRB1) should be activate.
    2. In Purchase order the freight condition type(FRB1) with zero value always.
    3. In transportation module in shipment cost item categories settings, you have to assign A-Shipment costs as a delivery costs in Shipment Relevant field.
    4. You have to do the PGR after creating shipment and shipment cost documents.
    5. Once you do the PGR the system will copy the shipment costs to material costs and system will generate separate line item in POHistory
    With regrad
    Lakki

  • Post Goods Receipt for Inbound Delivery using WHSCON IDoc

    Dear All
    Currently I am working on a big project dealing with EDI connections to our logistics partner for the Export business. The entire message flow between Lindt and our partner should be via EDI. Our SAP release is (still) 4.6c.
    We will create two kinds of despatch advice messages, one for inbound deliveries and one for outbound deliveries for customers.
    I would appreciate your support in the following problem that I am facing with the inbound delivery scenario:
    We create stock transport orders (purchase orders, POs) for the goods intended to be delivered into the plant at our partner
    We create a delivery (type NL = replenishment delivery) for this POs
    As soon as we post the goods issue we send the despatch advice (as EANCOM D96A DESADV message) to our partner.
    At this point the delivery is basically completed, i.e. packing status (PS) and goods movement status (GM / GS) are equal to 'C' (= completed).
    Our logistics partner uses the same EDI message to send us the goods receipts data, e.g.:
    We dispatched 50 units of a product => QTY:50:12
    The partner received indeed 50 units => QVR:50:66
    Please note that we do not use the QVR segment for the quantity difference (between despatched and received quantity) but it contains the received units. This way we avoid negative values in the QVR segment.
    When the logistics partner sends back the DESADV message containing the received quantities (QVR segment) we want to make
    the goods receipts for the products in the original stock transport order and
    upate the message flow in the delivery
    My idea was to transform the incoming DESADV message into a WHSCON.DELVRY03 IDoc based on the documentation in: [Delivery Interface|http://help.sap.com/saphelp_crm40/helpdata/en/e2/654b15a9f411d184ec0000e81ddea0/content.htm]
    In the delivery header control E1EDL18 I used QUALF = 'PGI' (Post goods issue).
    I prepared an inbound WHSCON IDoc according to the documentation mentioned below. I managed to get some feedback from the Idoc processing implying that the system tried to do the goods receipt in the PO but failed.
    To make a long story short here are my questions:
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    Does anybody have an example on how to fill the WHSCON IDoc?
    Or is my approach a cul-de-sac ?
    Kind Regards
       Uwe
    PS: A related question can be found here: Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

    Hi Uwe,
    Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
    The binary answer would be no. You should use WMMBXY or MBGMCR instead.
    But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
    We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
    I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
    Hope this helps. Let me know if you have more questions.
    Regards,
    Rudra

  • Lock inheritance with "CALL FUNCTION func IN BACKGROUND TASK"

    I see that the "SAP Lock concept" documentation states that for locks obtained with _scope = '3', all UPDATE tasks (spawned via "CALL FUNCTION func IN UPDATE TASK" inherit the lock (which is released only once all such update tasks and the calling process have requested a DEQUEUE).
    What should happen when instead, I use "CALL FUNCTION func IN BACKGROUND TASK" (for doing the update in a queue)? Are the locks inherited here as well?
    Cheers!

    Hopefully not, as a background task may be executed late. While update tasks are to be executed quickly (if not, administrators should review the system configuration, like increasing the number of UPD workprocesses).
    Solution: In the background task, redo the locks, as if it was a background job.

  • WS_DELIVERY_UPDATE - Post Goods Receipt (VL32n) for Inbound Delivery

    Dear Experts,
    Can you please provide a sample of how I can use the FM WS_DELIVERY_UPDATE in order to post GR for inbound deliveries(items already packed in HU)? The process should be simillar with the standard one from transaction VL32n. In case there is any other solution, please don't hesitate to provide it - FM BAPI_GOODSMVT_CREATE it's not a valid one for this scenario.
    Thanks and BR,
    Cristian

    Hello,
    Do this way.
    DATA:
    L_VBELN LIKE LIKP-VBELN,
    L_VBKOK LIKE VBKOK,
    L_PROTT LIKE PROTT OCCURS 0 WITH HEADER LINE.
    * carry out goods issue
    L_VBKOK-VBELN_VL = L_VBELN.<-- fill this field with your delivery number
    L_VBKOK-WABUC = 'X'.
    CALL FUNCTION 'WS_DELIVERY_UPDATE'
    EXPORTING
    VBKOK_WA = L_VBKOK
    SYNCHRON = 'X'
    NO_MESSAGES_UPDATE = ' '
    UPDATE_PICKING = 'X'
    COMMIT = ' '
    DELIVERY = L_VBELN
    NICHT_SPERREN = 'X'
    TABLES
    PROT = L_PROTT
    EXCEPTIONS
    OTHERS = 0.
    COMMIT WORK AND WAIT.
    Thanks,
    Abhijit

Maybe you are looking for