Issue in retrival of Old Appraisal system template

Dear Expert,
landscape :ecc 6 , business package 1.41
Currently i am facing a problem in ESS/MSS regarding extracting old appraisal template.the scenario is currently old and new (objective setting and appraisal ) both are available at server . i activated old appraisal system but again system is no extracting appraisal data of the subordinates ,using path data Mss -> Team - > Personnel development -> Appraisals .
then i created an iview with BSP using HAP_Document but system is extracting new appraisal templete rather than old one.
Please let me know the solution as it is an urgent .
Edited by: Sadia Kamal on Jul 31, 2011 5:55 PM

Dear Expert,
I took the follwoing steps
1. In the customization i use the subcomponent Appraisal Systems, this corresponds to the switch position <SPACE>.
2. in the portal content i create a new iview using template BSP based view, i gave the BSP application name : HAP_Document and start page name : Documents_todo.htm (for create purpose) , Documents_recieved_open (for display purpose)
3. in the customization i define the Iview path .
then execute the system , in the case of creation system showing new appraisal templates and in the case of view system is not showing the appraisals against employees .
Please advise wht to do .

Similar Messages

  • Switching from Old Appraisal System to Management By Objective (MBO)

    Dear fellow practitioners,
    I have a requirement to switch or migrate from the OLD appraisal system to the NEW appraisal system (MBO).
    Does anyone have any information of the implications of switching the value of REPLA in T77SO from blank to 'A' or 'X' when the old appraisal system is already configured previously and is to be replaced by the new appraisal system with similar business requirements?
    There is an existing appraisal catalog configured for the old appraisal system. How do I migrate the Appraisal Models in the Appraisal Catalog of the OLD Appraisal system to the NEW Appraisal Catalog in MBO?
    I have not been able to find much information with regards to this. Therefore, many thanks in advance to anyone who can shed some light or provide some references to this matter.

    Hello,
    have a look at note 728542
    It was planned to use the switch to replace the appraisal functionality in only one of the applications; technically it's turned out, this was not possible.
    For using the usual functionality for appraisals in training and event management (TEM), HAP00 REPLA has to be set to space.
    All other settings: X, T, A will cause problems.The reason is that many transactions of TEM delegate work to the central appraisal component and there the swith to MBO functionality is done (in the case X, T and A).
    It is however possible to use MBO functionality for personnel appraisals. The transactions of MBO have to be used 'directly'.
    These transactions are not part of the menu but can be added to the favorites list.
    PHAP_ADMIN_PA
    PHAP_CHANGE_PA
    PHAP_CREATE_PA
    PHAP_PREPARE_PA
    PHAP_SEARCH_PA
    PHAP_CATALOG_PA
    There is no recommended way to load historical appraisal data. You will have to write a customer-specific program for this purpose.
    It depends on your specific requirements whether you really need the data in R/3. For example, if you need the data for reporting, it may be easier to load the legacy data directly into BW. If you need them for program logic, e.g. to default values for new appraisals, you could consider loading the data into a customer table and read that table in your implementation of an appropriate user exit.
    Hope this help
    Sarah

  • Old Appraisal System (SAP R/3 4.7 ITS) upgrade to SAP ECC 6.0, Ehp4

    Hello experts,
    We are currently on SAP R/3 4.7 (using ITS) and will be upgrading to ECC 6.0, Ehp4 (using Netweaver Portal). This upgrade will be purely technical, no changes to existing talent modules.
    Our employee performance appraisals are currently accessed via ITS using the Old Appraisal System. Can you tell me if it is even possible to link the old appraisal system to the NW portal?
    If yes, what kind of changes are required here? Which iviews will I need to activate?
    All of your advice is greatly appreciated. Thank you in advance.
    Dina

    hi,
    THe old appraisal system runs on ITS , true .
    In the new ECC 6 , there is a built in ITS , which should allow you to still run the old services . But it makes sense to explore the newer functionalites offered in EHP4.
    Regards
    sameer

  • New & Old Appraisal systems

    Hi,
    I want new Appraisal system for performance appraisal of employee. And old Appraisal System for Training and Event Appraisal. Is it possible.
    Samriddhi

    close

  • Appraisal system

    we are working on Appraisal system.
    the requirement is, every person have his own criteria or ojective, no specific catalogue we can make
    so client demanding to have option to type the criteria of employees manually while creating the appraisal rather than have it in appraisal cataloge.
    how can we handle this in old appraisal system?
    thanks if any one can help

    im already using old appraisal system...no integration required.
    client demanding open entery option on criteria and weighting column.
    while creating appraisal of employee they can type, system is allowing..but weighting column is in display mode, so user can't entr any value in it......our client demanding it a open enterable column.
    remember im using old appraisal system.
    how to enable that weghting column so that user can enter value in that also?
    thanks if any one can help.

  • What's the difference between old SAP appraisal system and the new SAP appraisal system?

    Hi Experts,
    What's the difference between old SAP appraisal system and the new SAP appraisal system?
    Can anyone shed some light please.
    Thanks.

    emgr_update no longer sets or gets the thesaurus from workbench. In 11 all workbench configurations are saved in IFCR configuration directly.
    Hence the thesaurus entry should be added directly in version 11 Workbench as opposed to xml file in older versions.
    And if you want to migrate the changes across environments then import_site script in control directory can be used.

  • Objective Setting & Appraisals VS Appraisal System

    Hello,
    Trying to understand the meaning of customizing Objective Setting Appraisals instant of Appraisal System,
    Does anyone know if there is a way to transfer all the old Appraisal Models (BS Object) into the new Appraisal Template (VA Object) ?
    Another Question : Is it possible to continue using the old way (Appraisal System) with running projects and the Objective Setting & Appraisals for new needs? meaning - BAPIs like BAPI_APPRAISAL_CREATE \ CHANGE \ GETDETAILS will still work ?
    thanks !

    Hi Binu,
    I am not entirely clear about your requirement, but in OOHAP_VALUE_TYPE, for a specific proficiency value, if you have maintained a description for the value under 'Value description' then it will be displayed on the form within the 'Info' button.
    Regards,
    Priya.

  • How to retrive the old spool requests

    Hi team
    In one of our system we ran a job, the spool requests are created.
    When i tried to view it was deleted. Is there any way to see the old spool and retrive the old spool back.
    This is a critical issue, please help me out.
    Regards,

    Hai,
    It is not possible to retrive data after it has been deleted from the table.
    Deleted means by the housekeeping jobs. You will not find the entries in the table as a result you cannot query the table to get the results you needed.
    Restore means when a database is damaged it can be returned to a correct and consistent state with a restore procedure.
    In your case if you want the old spool request you can restore the backup of a particular date corresponding to the date of the spool request.
    http://help.sap.com/SAPHELP_NW70/helpdata/EN/f2/31ad56810c11d288ec0000e8200722/frameset.htm
    Regards,
    Yoganand.V

  • Business Event Appraisal Form in New Appraisal System

    Hi,
    I have created Business Event Appraisal Form in New Appraisal System. I have done Appraisals for one Business Event by an attendee.
    Where can see this Appraisal Document of Business Event and do any change if required. Or from we can delete this documents of Business Event Appraisal.
    I have tried tcode appchange but there only Personnel Appraisal templates are visible.
    Samriddhi

    Hi,
    If you are using a template created by using the Objective Setting and Appraisals componet you can view and maintain forms filled in by employees via Transaction phap_admin_pa.
    Br,
    Art

  • Old shopping cart template

    Dear experts,
    We are on classic (SRM7.0/ECC6.0)
    When I try to create a SC from 'Old SC template' the standard screen with a list of old ordered SCs is displayed with following fields: Name/Number, Created on, Description, Quantity, Unit, Net Valur, Currency, Status.
    However I noticed that for all previously ordered carts the fields 'Description' and 'Unit' are blank whereas 'quantity' for all SC is displayed as 0. I had given description, unit and qty in all my free text carts.Then why this issue? All other fields are correctly populated
    Please advise experts
    Best Regards,
    John

    no jay. bus2201 is ECS PO .
    i wanted know what are the sc cart item belongs to old purchaser order template ...
    any clue form BBP_PD_SC_GETDETAIL ?
    jay :
    Who know distinguish between normal create SC and copy SC to create SC.
    can you do quick review
    for me all sc are 000000000000000000000000000
    SRC_GUID                     00000000000000000000000000000000
    any one help is appreciated.. it can be closed this thread shortly..
    muthu
    Edited by: Muthuraman Govindasamy on Mar 17, 2010 3:46 AM

  • Archiving Information from "old" SAP systems and switch off the server

    Good day
    I hope someone can offer some advice. Our company has a few sites across the globe. Three of the sites in South Africa ( where I'm working at the moment ) had their own SAP systems. Three odd years ago, we implementeted a new SAP system, combining the separate SAP systems into the new one, running of the same box etc etc. The "old" SAP systems were still availbale after the new one went live, in the event that people want to look back at history.
    We are you busy with a project where we are going to merge our current SAP implementation into our global SAP system... obviously only the current master data are going to be transfered to the new system. It's an idea time for us to clean up our data.
    My question: Once we go live on our global SAP system, we want to "export" or archive from the 3 "old" SAP systems the Master Data from the HR module ( like employees who's left the company - it's law to keep the records for 5 years at least once a employee has left) , HSEC and FI modules into a single datastore... this way we don't have to keep the three servers running in the event that history is required. The servers wil be kept off-line and only switched back on if a detailed audit is required.
    The global SAP system does not have an archive solution implemented to we can't access archived data from the new system...
    So, we need to export master data from our 3 old SAP boxes into a Unicode type file system, and our local South African sites needs to be able to access the information using a text type editor or a web based interface we can run off our SAP Portal...
    Thank you

    Hello Cornelius,
    To introduce myself, I am an active SDN/BPX member as well as an ASUG Archiving and Information Lifecycle Management Volunteer.
    Decommissioning Legacy Systems (SAP and non-SAP systems) is quite the topic these days with divestitures becoming such a common occurrence. 
    Some things to think about in this situation are:
    Identifying the data to be decommissioned:
    what information would be needed for an audit
    what information would be needed for a lawsuit situation
    Identifying the access requirements to this data.
    Identifying the retention policies for this data (this will be
    driven by regulatory requirements, etc.).
    If this has not already been done - define retention periods for this data - it will most likely have different retention periods based on the type of data.
    You mention that you do not have an archive solution in place yet. 
    I would recommend that you may want to research that option because typical requirements for retaining legacy data is that it is stored in such a manner so that it is protected from any type of modification.
    There are a lot of 3rd party archiving/storage solutions that provide this type of secure storage.
    You are correct in that you will want to export or archive the legacy data as opposed to loading the data into your current system.  It would probably involve a large increase in the size of your SAP database and you would probably run into number range overlaps.
    But, if this data is exported to a filesystem, you will be losing the business logic associated with the data, and the information is no longer in its original format (this could have legal ramifications). 
    I would recommend using SAP Archiving functionality for this effort.  If you are looking for outside resources, there are many vendors out there that have a lot of experience with these types of projects.
    Two that come to mind are Dolphin IT and OpenText.
    Or, depending on the timeline of your project, SAP is coming out with a tool that can be used for decommissioning SAP Systems.  It is part of
    their SAP ILM solution.  It will be called Retention Warehouse.  Here is a paragraph from their latest white paper describing this new tool:
    With the retention warehouse, SAP now offers a
    standardized method for system decommissioning in
    answer to these pressing issues. It allows you to reuse the archived data outside the original system in a central
    retention warehouse.
    For more detail on this topic, the white paper can be found on the SAP ILM Website:
    service.sap.com/ilm
    This tool is part of a larger initiative from SAP to help customers with their ILM (Information Lifecycle Management) strategy.  This tool is near and dear to me as I was fortunate enough to be part of an
    ASUG Influence Council that helped with some of the requirements for this solution.
    I hope this information is useful. 
    Good luck and Best Regards,
    Karin Tillotson

  • How to delete old source system assignment and assign new source system.

    Hi Experts,
    I have bunch of datasource which are pointing to source system A (when I see it in RSA1). Recently all the datasources which are in source system A has been moved to source system B.
    Now I have replicated all the datasources from the source system B. But in RSA1, still I am seeing the datasources which are pointing to sourcesytem A. I want this to be pointed to source system B.
    Is there a way to do this?.  I have searched in forum and found that this ned to be done manually. Do i need to do it for all the datflows? Is there any thing we can do when running BDLS?.
    Please let me know if you need more inputs.
    Thanks a lot for you suggessions. Eagerly waiting for valuable suggessions.
    Thanks and Regards,
    Saravanan Payani.

    Hi Anindya,
    Thanks for your quick reply. I want to keep the data what ever there in the cube as of now. From now on I want to extract data from new source system.
    Basis team ran the BDLS but i don't see any changes. Still my datasources are pointing to OLD source system.
    Background : I have an infocube for which the datasourec is ZCRM_MKT_001, which is available at  source system IRDCLNT001. Now the above datasource has been moved to new source system IRXCLNT001. As my datasource is moved to new source system, I want the data from the new source system.
    My issue : But when i expand the data flow of the infocube in RSA1to the lowest node, against the datasource i can still see the source system as IRDCLNT001 (which is old) under 'Object Information' column. I want this to be pointed to my new source system that is IRXCLNT001.
    Is there any way to arrive at this?.
    Thanks for your time on this.
    Thanks and Regards,
    Saravanan Payani.

  • Been reverted back to old profile system

    Hi, just need a bit of info as to why ive been put back on to the old profile system, my hub as been syncing to my full line capacity for 3 days now, on the first day of the 3 days it started syncing at 14569kbps i was still on  the new system wich gave around 12.6meg, day2 my speed dropped to around 11meg but my sync rate stayed the same, i did a speed test and found i'd been put on the old profile system and had 12000k, day 3 which is today im still on the old profile system, i cant do a speedtest at moment as its not working, but im still getting the same speed (around 11meg) on other speed testers but sync rate on my hub is still the same, have bt put me on the old system? if they have then why? i thought it would of changed it self back over night but i didn't happen. Does anyone know why its happened?  as you can see it as re synced in the 3 days but rate stayed the same
    ADSL line status
    Connection Information
    Line state
    Connected
    <script type="text/javascript">// function p_ajax_adsl_status() { ajax_download_start('adsl_status=1', p_ajax_adsl_status_cb); } function p_ajax_adsl_status_cb(xml) { if (document.getElementById('adsl_status').innerHTML != xml) { document.getElementById('adsl_status').innerHTML = xml; mimic_button('submit_button_ajax_refresh', 1); } else setTimeout('p_ajax_adsl_status()', 5000); } setTimeout('p_ajax_adsl_status()', 5000); // </script>
    Connection time
    1 days,
    02:11:59
    Downstream
    14,569 Kbps
    Upstream
    1,166
    Kbps
    ADSL Settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    G.992.5 Annex
    A
    Latency type
    Interleaved
    Noise margin
    (Down/Up)
    2.6 dB / 6.0
    dB
    Line attenuation
    (Down/Up)
    34.9 dB / 13.7
    dB
    Output power
    (Down/Up)
    22.0 dBm / 1.7
    dBm
    Loss of Framing
    (Local/Remote)
    0 / 0
    Loss of Signal
    (Local/Remote)
    0 / 0
    Loss of Power
    (Local/Remote)
    0 / 0
    FEC Errors
    (Down/Up)
    28869 / 0
    CRC Errors
    (Down/Up)
    18111 / 0
    HEC Errors
    (Down/Up)
    97163 / 0
    Error Seconds
    (Local/Remote)
    6846 / 0
    Solved!
    Go to Solution.

    Hi thi post from one of the mods on another thread will explai to you just a matter of waiting for it to be restored
    Hi Guys
    This upgrade is only available on 21C, but only Huawei 21C MSANs (equipment situated in the local Telephone Exchange) currently support it. Exchanges with Fujitsu MSANs will get the upgrade as part of the second phase, and that is happening soon.
    There are two clear benefits to the changes,
    An improvement in the IP rate as it is much closer to the sync rate. For example under the new method a sync rate of 18000kbps equates to an IP profile of 15881kbps which is an improvement of 881kbps in IP throughput.
    The other improvement is that there is no delay in uplift because this new process takes a different route to configure the BRAS IP profile system loading and volumes are no longer an issue and the BRAS updates with the new style IP profiles immediately.
    However until phase 3, where our systems will be updated, some lines could benefit from the improvement only to be overwritten by the systems back to the old style profiles at a later date. This will be temporary until the systems have been updated where this issue will be rectified..
    Cheers
    Stuart
    BTCare Community Mod
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • I download songs directly to my iTouch due to a computer crash.  I am still running an old iOS system.  Just notice yesterday I cannot download albums any longer just songs to my iPod? I go to ITunes store.  Open a music file to download and it will give

    I download songs directly to my iTouch due to a computercrash.  I am still running an old iOS system.  Just notice yesterdayI cannot download albums any longer just songs to my iPod? I go to ITunesstore.  Open a music file to download and it will give me the opportunityto buy every song but the album and songs that go with the album only.  Thebutton is not accessible for an album purchases. Any assistance would behelpful.

    No one has had this issue? I go to Itunes store.  Open a music file to download and it will gives me the opprotunity to buy every song but the album and songs that go with the album only.  HELP

  • Is Australia/New Zealand localization does have CR System Template

    hi all,
    recently i just upgraded my SBO to 8.81. but CR system template is not available. (AU localization), now what is did is the ff.
    1. make a new company AU localization - new company don't have CR system Template for marketing docs
    2. make a new company UK localization - new company HAVE a CR system Template.
    3. Make a new company US localization - new company HAVE a CR system Template.
    now my initial conclusion is "Localization issue"
    is my observation correct? please help me understand this issue.
    Thanks
    regards,
    Fidel

    Hi Fidel,
    In Indonesia here, we always use Australian localization, and in 8.81, it doesn't come out with system CR template like you said.
    Best Regards,
    Hendry Wijaya

Maybe you are looking for