Issue in SAP CPS for Job Interception

Issue in SAP CPS for Job Interception
Scenario:
After triggering a Process Chain in BW and maintaining the Job Interception settings in SAPCPS(Redwood)
(so that any job which triggers in BW by that Particular User is intercepted and not let it proceed further until the job is released in SAP CPS.)
Issue:
The Jobs are getting into Waiting status in SAP CPS(Redwood) even though there is no progress in loads in BW side. Also the Jobs are in Intercepted state even after releasing the Parent Job in SAP CPS(Redwood).
Please let us know how to go about it.

Hi Ramesh,
What you plan to do is called monitoring of process chains (ie. process chains not started from CPS) and this should be available in the latest version of CPS.
This requires the interception of only the BI_PROCESS_TRIGGER process, just as you have configured now, and other than that the following prerequisites:
SAP Note 1080558 describes the SP levels for the BW/BI releases
XBP 2.0 or higher
Redwood transport files must be loaded
ProcessServerService.SAP.XBPVariant license key
Maybe this helps,
Anton.

Similar Messages

Migration of "CRONACLE for SAP solutions" to "SAP CPS for Netweaver"

Hi,
We have standalone Cronacle/CPS 6.02. We are in the process of researching about migrating to "SAP CPS for Netweaver" like SAP CPS M33. We have the following questions.
1)Is a migration path available to migrate from "CRONACLE for SAP solutions" to "SAP CPS for Netweaver" ?.
2)What are the benefits of going to "SAP CPS for Netweaver" ?.
3)Is the migration can be done by ourselves or any SAP migration consultant is required?.
Please advise.
Thanks.
Raj.

Hi Laurence, Raj,
This question is very old and I had not seen it before.
To upgrade from CPS 6.0.2 or 7.0.4 to 8.0.0 (aka M33). I do not know if SAP consultancy offers anything for this, you want to check with them. SAP might refer you to Redwood, though.
As for the differences, where do I start ... ;-)
Actually, CPS 8 is a major platform shift. Version 6 and 7 were PL/SQL-based solutions, version 8 is Java-based. You have many more possibilities built-in, such as better XBP 3.0 support, web services, SAP BusinessObjects, SAP PI/XI control, ... the list could go on forever.
Some older platforms (very, very old) are no longer supported, afaik, but you get native z/OS (mainframe) platform agents, AS/400 agents ... the user interface is platform independent, so you can access it from any OS including, but not limited to, Windows, Unix, Linux, and Mac OS X. There is even an iPhone/iPad client.
BTW, I do not know how long version 6 and 7 are supported.
The platform shift means that you might have to use a PL/SQL API in version 8. I guess it depends on how much PL/SQL you use. If most of your jobs are SAP and OS jobs, you would not even need that.
Regards,
HP

Config issue in SAP AMI for triggering XML

Hi,
We have configured the AMI. Also setup the AMI enabled devices.
We have created Meter Reading Orders for the periodic meter reading as bulk .
But the creation of MROs does not trigger creation of XML messages.
We found the Enterprise Service responsible for meter reading order Request Smart Meter Meter Reading Document Creation as Bulk SmartMeterMeterReadingDocumentERPBulkCreateRequest_Out
But the XML messages are not getting generated on MRO creation. Also no XML message generated on AMI enabled device creation.
I could go into SXMB_MONI with date and time stamp to view the XML message, not able to view the XML.
Is there any thing specific needs to be configured to have the XML message in SXMB_MONI
The process we are following is we are creating periodic meter reads and using the transaction ELMU/EL35 Customized to our needs to trigger the SmartMeterMeterReadingDocumentERPBulkCreateRequest_Out . Are we following the right approach.
Is it the right transcation code to trigger the Enterprise service and what are the parameters to be passed.
Thanks,
Vijay.
Edited by: vijay gunti on May 28, 2010 8:50 AM

hello,
The meter reading process in SAP AMI for bulk order is different then single meter reading order. First step is create meter reading order by Transaction code EL09. It will not create enterprise service. The status of meter reading order will be suppressed when you view status by transaction EL31. After meter reading order creation, run transaction EL35 to download meter reading order. After running this transaction, it will create enterprise service and update meter reading order status to Meter reading request sent. At this stage, meter reading order will move to MDUS system.
Give me shout if you have any questions.
Thanks
Shailesh

SAP CPS script to calculate the percentage of number of jobs completed

Hello
I have 2 client specific jobs, which I am executing on 300+ ABAP system using SAP CPS system. I would like to know..
what % of jobs completed successfully & failed.
at present, using the filter method, I get a consolidate jobs status mail. some think like this.
regards
Shridhar Gowda

Hi Shridhar,
Redwood system maintains statistics for each job Definition.
In job statistcis you can notice Execution Completed Count and Execution Error Count .
You can use Redwood script to pull those statistics
Use following methods to extract them.
getExecutionCompletedCount()
getExecutionErrorCount()
You can write code to get the error percentage and completed percentage.
Hope this helps.

Job Scheduling Management vs SAP CPS

Hi Guys
I am trying to find out what are the differences between using the Job scheduling management tool in Solution manager and SAP CPS integrated into Solution manager. What are the benifits of using CPS as opposed to using the "standared" job scheduling tool.
santosh

Hello Santosh,
the link that you already got is good. Perhaps you also want to check out [http://wiki.sdn.sap.com/wiki/display/SM/FAQJobSchedulingManagement|http://wiki.sdn.sap.com/wiki/display/SM/FAQJobSchedulingManagement] and [SAP is first vendor to provide a comprehensive Job Management Suite |SAP is first vendor to provide a comprehensive Job Management Suite] for further information.
In short SAP CPS is an advanced scheduling tool like which competes against other like UC4, Control-M from BMC etc. But all these tools do not provide any real job documentation or job request functionality in order to get the process governance right. That's where the SolMan gets into the game.
Best Regards
Volker

Professional Exp in legal advisory issues related to Indonesia for SAP Impl

Hi BW Experts,
Can anyone have knowledge on Legal advisory issues related to Indonesia for SAP Impl .... I have got the requirement. I need to get some kw on that please let me know if any one have Professional Exp in legal advisory issues related to Indonesia for SAP Impl. It willl be helpful for me get into the project.
Thanks in Advance. Have a nice day!
-Nani

Hi,
Professional Tax is independent state taxes and slab rates are different to state to state. Income tax is central tax for the employees who are earning money from various jobs.
Both taxes are deducted every month if the employee salary is under the Taxable slabs.
For slabs check in the internet or check in the SCN with specific state name.
Regards,
Praneeth kumar

How to schedule a job in SAP CPS

Hi,
I am new to SAP CPS.
So please tell how to schedule a job in SAP CPS. And which kind of job cam be schedule means BAP report.
Thanks
Anurodh

Hi,
In the installation and administration guide you'll probably find some examples.
The Job Definition you need is SAP_AbapRun to run any ABAP.
You submit this, specify the parameters as desired, and scheduling information, and that should do the trick.
That is assuming you have already connected CPS to an SAP system.
Check the topics in the docs within the product and on SDN on:
- Connecting to an SAP system
- Submitting Jobs
- SAP_AbapRun
Regards,
Anton.

How to Schedule a Job Chain to start automatically on SAP CPS.

Hi,
I did a job chain and i want to run automatically on sap cps Tuesday thru Saturday at 6:00 a.m., i make a calendar on sap cps with this specific options but the job chain doesn't start running. I don't know if i need to do something more, so if someone can give a little help with this i will apreciate a lot.
Thanks,
Omar

It finished ok but on the operator message i got the following message:
Unable to resubmit this job.
Details:
com.redwood.scheduler.api.exception.TimeWindowExpectedOpenWindowException: CalculateNextClose should only be called on an open time window
at com.redwood.scheduler.model.method.impl.TimeWindowMethodImpl.calculateNextCloseIntersectionInt(TimeWindowMethodImpl.java:388)
at com.redwood.scheduler.model.method.impl.TimeWindowMethodImpl.calculateNextCloseIntersectInt(TimeWindowMethodImpl.java:249)
at com.redwood.scheduler.model.TimeWindowImpl.calculateNextCloseIntersectInt(TimeWindowImpl.java:212)
at com.redwood.scheduler.model.method.impl.SubmitFrameMethodImpl.calculateNextInt(SubmitFrameMethodImpl.java:178)
at com.redwood.scheduler.model.SubmitFrameImpl.calculateNext(SubmitFrameImpl.java:176)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.resubmitSubmitFrameJob(JobStatusChangePrepareListener.java:763)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.resubmitJob(JobStatusChangePrepareListener.java:637)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.processJobToFinalState(JobStatusChangePrepareListener.java:520)
at com.redwood.scheduler.model.listeners.JobStatusChangePrepareListener.modelModified(JobStatusChangePrepareListener.java:233)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.informListeners(LowLevelPersistenceImpl.java:728)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.writeDirtyObjectListRetry(LowLevelPersistenceImpl.java:207)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.access$000(LowLevelPersistenceImpl.java:38)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl$WriteDirtyObjectListUnitOfWork.execute(LowLevelPersistenceImpl.java:79)
at com.redwood.scheduler.persistence.impl.PersistenceUnitOfWorkManager.execute(PersistenceUnitOfWorkManager.java:34)
at com.redwood.scheduler.persistence.impl.LowLevelPersistenceImpl.writeDirtyObjectList(LowLevelPersistenceImpl.java:102)
at com.redwood.scheduler.cluster.persistence.ClusteredLowLevelPersistence.writeDirtyObjectList(ClusteredLowLevelPersistence.java:59)
at com.redwood.scheduler.model.SchedulerSessionImpl.writeDirtyListLocal(SchedulerSessionImpl.java:648)
at com.redwood.scheduler.model.SchedulerSessionImpl.persist(SchedulerSessionImpl.java:626)
at com.redwood.scheduler.apiint.model.UnitOfWorkManager.perform(UnitOfWorkManager.java:32)
at com.redwood.scheduler.apiint.model.UnitOfWorkManager.perform(UnitOfWorkManager.java:13)
at com.redwood.scheduler.jobchainservice.JobChainService.childJobFinalStatus(JobChainService.java:223)
at com.redwood.scheduler.core.processserver.ProcessServerRuntime.childJobFinalStatus(ProcessServerRuntime.java:836)
at com.redwood.scheduler.core.processserver.ProcessServerRuntime.onMessage(ProcessServerRuntime.java:248)
at com.redwood.scheduler.infrastructure.work.MessageEnabledWork.run(MessageEnabledWork.java:104)
at com.redwood.scheduler.infrastructure.work.WorkerImpl.run(WorkerImpl.java:109)
at java.lang.Thread.run(Thread.java:534)

Issue in SAP GUI 7.0 for ECC6 (ABAP Editor not working)

Dear SAP Team,
We have installed SAP ECC6.0 EHP4.We have installed SAP GUI 7.0 in our clients machine but in some machines the ABAP Editor i.e Tcode SE38 is not working properly.When our Client selects any transaction for editing the system gets HANG.
We have tried uninstalling & reinstalling the software & the patch but the problem still persists.The configuration of all our client machine are same & we work on Windows XP platform.Please help us in solving our issue as soon as possible.
Thanks & Regards,
Manoj Mhatre.

Dear Manoj
you mean the SAP Gui for windows 7.20 or 7.10?
Please install the latest Sapgui Patch 3 for the Sapgui 720, or the Sapgui
Patch 19 for the Sapgui 7.10.
As workaround, please use the OLD frontend editor.
Best regards,
Sven

Message directly from SAP for job details from SM37 to email adress.

Hi,
Can any one tell me if there is any way of triggering a mail from SAP R3 for any particular job details from T code SM37.
Thanks & Regards,
Rohan Somji.

Dear Rohan,
Check this thread to explore about the settings to be doen for sending E mail to the external system,
Re: Settings to be done for sending mail to external system
Regards
Mangalraj.S

Upgrade SAP for SAP CPS?

Hello,
we are currently running SAP 4.70. Is it necessary to upgrade your SAP environment to ECC 5.0 or ECC 6.0 to be able to use the SAP CPS environment, or is it directly useable in combination with SAP 4.70?
I'll award points for helpfull answers.
Regards,
Roy

Hi Roy,
SAP CPS supports all the versions of SAP starting from SAP 3.2, so no need to upgrade to ECC5 or ECC6.
If you are asking this question from SAP CPS licensing part and going ahead with the Basic free version, you need to have at least one SAP NetWeaver component in your SAP landscape.
If you are planning to go for full version licence, then it will do even if you do not have any NetWeaver component in your SAP landscape.
SAP CPS versions 6 & 7 (Also known as Redwood Cronacle version 6 & 7 and built by Redwood and supplied by SAP) can cater to even SAP 3.0 systems.
Hope this helps. Please let me know if you need some more information in this regard.
Best regards,
Vithal

Creation and Generation of report in SAP CPS

Hello Experts,
Please suggest me and guide me how to create and generate a report in SAP CPS. Some of the functionalities are not properly explained in Admin guide.I got very less information regarding this.Below is my requirement.
I want to generate a report that should show the list of jobs for the past 1 month.The report should be dynamic.No hard code.I want to run this report at the end of every month.So for this i will create a time window.
So please help me to proceed with my task.Also please provide me some links where i should get the full functionalities for all the tabs under report along with example so that i could better understand it.
Thanks and Regards,
Ashish Dey.

Hi,
The easiest approach is the following:
- go to the Job Monitor, and create a job filter that matches your needs (or check if it already exists)
- when you have a filter that suits your needs (in this case: last month's jobs), go to Definitions, Reports
- create a new Report, based on a query filter: the name of the filter you created (or a predefined one)
- add columns to your report (or add all columns)
- add a sort order if you want to
- further where clauses are not required if the filter already does what you want it to do
- save the report
Use the JobDefinition System_ReportRun (if I recall correctly) to schedule this report on the last day of every month.
Regards,
Anton.

SAP opportunity for IT/BPO services as well as airline domain

Hi All,
I need suggestions related to my career path that i am building. I am a consultant having around 4.5 +years of experience in sap consulting. I do for Mm/QM. I have support/implementation experience in manufacturing , process industry who were my clients during my professional tenure. Now i have decided to join a company (actually joined) which is into IT/BPO services ( they manage the activities through SAP( procurement being my part))and also has done sap implementation for airline domain. They do not do any other sap practice other than travel and airline. Now if i tell you , i have joined the company so that i can see how SAP is customized to match the requirement of IT/BPO services. This is a new domain for me and i think i have lot to learn from it. However i also see that i have the chance of being dynamic (vertical wise) as i have knowledge in manufacturing, process, it services/ airline. So i am thinking of staying and learning the same. But 3-6 years down the line i might again change my job with/into consulting firms/ solution providers. In that case will it be a right decision to stay with this organization and work profile or leave and move to the previous vertical in which i was (consulting firms/ solution providers)
Regards,
SS

Hi Sen,
as told by Vev Patra, if you thinks you are gaining knowledge about new things, please stay there because you will get a lot of things to be learn, when it comes to switch towards other side, it will not be a major issues for you, because after some years you will get domain knowledge in various module and your expertise also increased upto a level, and that will be sufficient for a vertical growth.
But if you are thinking that, there is nothing more to learn, then you can move towards your previous role, as not gaining any new thing, means you are not learning new concepts, and in this way you get struck at one point, which in needless.
So, it totally on your business aspects, if you thinks your previous role was good, then you can move onto it, but if you are enjoying the present role, please keep it with you, because it will also play a vital role in your vertical career growth in some manner.

SAP CPS installation

Hi experts,
Is SAP CPS works with ECC6.00 ???
Required Components of other Product Versions
o SAP CPS Basic integrated requires ...
SAP NETWEAVER 7.0 - Application Server Java
Is my ECC 6.00 is NETWEAVER 7.0 ???
my ECC 6.00 does not contain JAVA stack....
I have BI java system.....can i add this feature to BI and can i schedule jobs in ECC???
please suggest...
Regards
'Siva
Edited by: skreddy555 on Jan 29, 2011 10:02 AM

Hello 'Siva,
if the required component for CPS is NW Java Application Server 700 and your ECC 6.0 is ABAP only, then i'll not work.
If your BI Java system is on 700 level, then you can install this component there - if no further requirements are needed.
Finally, if your BI communicates w/o problems with your ECC (which I believe it does), then CPS will communicate fine as well (that is, it'll schedule jobs in ECC w/o problems).
Best regards,
Tomas Black

Help for Job BDLS - Logical System Conversion aftrer System Refresh

hi SAP Basis Gurus,
We have restored production data to test system. After that we are doing Logical System conversion - Renaming of Logical System Names. For that we are running BDLS job. The program used is IBDLS2LS.
Now one job is running for more than 200000 seconds. Job is doing "Sequential Read" on table ZARIXCO40. The following has been updated in the jobs log:
01.02.2008 10:20:06 Processing table ZARIXCO40
02.02.2008 01:59:56 Processing table ZARIXCO40
02.02.2008 22:26:44 Processing table ZARIXCO40
02.02.2008 23:04:05 Processing table ZARIXCO40
So as per above log, it looks like job got stuck in loop for table 01.02.2008 10:20:06 Processing table ZARIXCO40.
The oracle Session is showing following SQL Statement:
SELECT
/*+
FIRST_ROWS
FROM
"ZARIXCO40"
WHERE
"MANDT" = :A0 AND "LOGSYSTEM" = :A1 AND ROWNUM <= :A2#
~
Execution Plan is :
~
Execution Plan
Explain from v$sql_plan: Address: 00000003A2FD5728 Hash_value: 2772869435 Child_number: 0
SELECT STATEMENT ( Estimated Costs = 4.094.270 , Estimated #Rows = 0 )
        3 COUNT STOPKEY
            2 TABLE ACCESS BY INDEX ROWID ZARIXCO40
              ( Estim. Costs = 4.094.270 , Estim. #Rows = 32.799.695 )
                1 INDEX RANGE SCAN ZARIXCO40~0
                  ( Estim. Costs = 418.502 , Estim. #Rows = 65.599.390 )
                  Search Columns: 1
~
Table has been analyzed today. See the details below:
~
Table   ZARIXCO40
Last statistics date                  02.02.2008
Analyze Method              mple 16.623.719 Rows
Number of rows                        65.599.390
Number of blocks allocated             2.875.670
Number of empty blocks                     7.912
Average space                                934
Chain count                                    0
Average row length                           313
Partitioned                                   NO
UNIQUE     Index   ZARIXCO40~0
Column Name                     #Distinct
MANDT                                          1
KOKRS                                         14
BELNR                                  2.375.251
BUZEI                                      1.000
~
Index used for this table is also analyzed today:
~
UNIQUE     Index   ZARIXCO40~0
Column Name                     #Distinct
MANDT                                          1
KOKRS                                         14
BELNR                                  2.375.251
BUZEI                                      1.000
Last statistics date                  02.02.2008
Analyze Method              mple 24.510.815 Rows
Levels of B-Tree                               3
Number of leaf blocks                    418.499
Number of distinct keys               65.480.722
Average leaf blocks per key                    1
Average data blocks per key                    1
Clustering factor                     40.524.190
~
Can you please let me know what could be the issue and how to resolve this issue so that job gets completed. Normally this job runs for 1,00,000 seconds. I can not afford to cancel this job and run again.
Any help is Highly appreciated,
Thanks
Best Regards,
Basis CK

Hi Markus,
The stastics of the table is already updated today. After that also it is not going faster. It is doing "Sequential Read" for more than 5 hours and then one update is issued. And in the job log, all other tables are preocess only once, only this table is selected to processed 4 times which is very abnormal.
01.02.2008 07:43:59 Processing table ZARIXCO11
01.02.2008 07:45:36 Processing table ZARIXCO16
01.02.2008 10:17:20 Processing table ZARIXCO21
01.02.2008 10:20:06 Processing table ZARIXCO26
01.02.2008 10:20:06 Processing table ZARIXCO29
01.02.2008 10:20:06 Processing table ZARIXCO33
01.02.2008 10:20:06 Processing table ZARIXCO37
01.02.2008 10:20:06 Processing table ZARIXCO40
02.02.2008 01:59:56 Processing table ZARIXCO40
02.02.2008 22:26:44 Processing table ZARIXCO40
02.02.2008 23:04:05 Processing table ZARIXCO40
~
I guess this will keep on going like this and not sure when it gets complete. Any other thing you can suggest which help to resolve the issue.
Thanks
Best Regards,
Basis CK

Issue in SAP CPS for Job Interception

Similar Messages

Maybe you are looking for