Issue in Select Options

Hi all,
Iam doing a development in which iam using select option component. i have 4 selection para meters. When i use the Component iam getting 4 default buttons RESET, COPY etc.
Is this 4 buttons mandatory? i also know we can remove the buttons via abap code but stil when i remove Copy button my select options doesnt get any input from screen . Same PO when i use with Copy button (after pressing copy button) its recognising.
Kindly help me in resolving this issue
thanks
dhinesh

Hi Dhinesh,
Hope the below snippet solves your purpose
DATA: LT_RANGE_TABLE TYPE REF TO DATA,
        RT_RANGE_TABLE TYPE REF TO DATA,
     LT_RANGE_TABLE1 TYPE REF TO DATA,
        RT_RANGE_TABLE1 TYPE REF TO DATA,
        READ_ONLY TYPE ABAP_BOOL,
        TYPENAME TYPE STRING.
DATA: LR_COMPONENTCONTROLLER TYPE REF TO IG_COMPONENTCONTROLLER,
        L_REF_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE.
create the used component
L_REF_CMP_USAGE = WD_THIS->WD_CPUSE_ZSELECT_OPTION( ).
IF L_REF_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
    L_REF_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
WD_THIS->M_WD_SELECT_OPTIONS = WD_THIS->WD_CPIFC_ZSELECT_OPTION( ).
init the select screen
WD_THIS->M_HANDLER = WD_THIS->M_WD_SELECT_OPTIONS->INIT_SELECTION_SCREEN( ).
WD_THIS->M_HANDLER->SET_GLOBAL_OPTIONS(
                              I_DISPLAY_BTN_CANCEL = ABAP_False
                              I_DISPLAY_BTN_CHECK   = ABAP_False
                              I_DISPLAY_BTN_RESET   = ABAP_true
                              I_DISPLAY_BTN_EXECUTE = ABAP_False ).
create a range table that consists of this new data element
LT_RANGE_TABLE = WD_THIS->M_HANDLER->CREATE_RANGE_TABLE( I_TYPENAME = 'Your Feild' ).
WD_THIS->M_HANDLER->ADD_SELECTION_FIELD( I_ID = 'Your Feild'
IT_RESULT = LT_RANGE_TABLE I_READ_ONLY = READ_ONLY ).

Similar Messages

Issue with Select options in select statement - ABAP Question

Hi
I am facing an issue with select options. Select statement is returning sy-subrc as 4.
I wrote the program as below:
SELECT-OPTIONS:
s_kunnr FOR bsad-kunnr,
s_lifnr FOR bsak-lifnr,
s_gjahr FOR bsad-gjahr,
s_bukrs FOR bsad-bukrs,
s_saknr FOR bsad-saknr,
s_budat FOR bsak-budat.
In start of selection I have written the select statement as
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs AND lifnr = s_lifnr AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
In selection screen I have not entered any values and executed the program. I am not getting any result. When I debug that, sy-subrc is 4 at above select statement. But table has records.
If am removing the "lifnr = s_lifnr " condition in select then select is returning values.
I am not getting where I made the mistake. Please suggest.
Thank you
Hanu

Hi,
The problem here with where condition select option lifnr = s_lifnr.
Use below select query.
SELECT * FROM bsak INTO TABLE lt_bsak
WHERE bukrs IN s_bukrs
    AND lifnr     IN s_lifnr
    AND gjahr   IN s_gjahr
    AND budat IN s_budat
    AND saknr IN s_saknr.
s_lifnr is a select option and you are passing it as parameter lifnr = s_lifnr.
if you want to pass this s_lifnr as single vale then pass in below mentioned way.
lifnr = s_lifnr-low
BR,
Vijay

Issue about Select-options in NWG

Hi Techies,
Greetings of the day.
I can able to get the data using Filter in the URI but when i want to use select-options as parameters in the URI it is giving me error.
kindly help me on this issue how to write select-options to get the data
Thanks In Advance.
Thanks & regards
Sathish

Hi Sathish,
Your question doesn't make a lot of sense. Filters are converted into select option format in the DPC, you can't "use select-options as parameters in the URI". The URI has to be OData-compliant and select-options are nothing to do with OData.
You should be using a filter and interpreting the select options in the DPC. Be aware that not all select-options patterns are converted from filters.
Regards
Ron.

Issue with Select Options

Dear Experts,
I used component wdr_select_options to achieve select options functionality, But it displaying only one field as per my requirement user expecting both low & high fields.
Can you guide for 5 select options whether i have use t times the component at my component level.
And also could please guide me how to use select options at code level.
Thanks & Regards,
Siva Mandapudi.
Edited by: SIVAMANDAPUDI on Jul 18, 2011 6:39 PM

Hi Saravan,
Please find below details.
The exception is:
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "ONACTIONSEARCH_SUPPLIER" "(METHOD)", nor was it propagated by a
RAISING clause.
code:
DATA FOR WORKING WITH SELECT OPTIONS
data: rt_SUPPLIERNO type ref to data.
data: rt_SUPPLIERNAME type ref to data.
field-symbols: <fs_SUPPLIERNO> type table,
                <fs_SUPPLIERNAME> type table.
TYPES: BEGIN OF T_SUPPLIERNO,
         SIGN(1),
         OPTION(2),
         LOW TYPE /SAPAPO/LOC,
         HIGH TYPE /SAPAPO/LOC,
        END OF T_SUPPLIERNO.
TYPES: BEGIN OF T_SUPPLIERNAME,
         SIGN(1),
         OPTION(2),
         LOW TYPE /SAPAPO/LOC_DESCR40,
         HIGH TYPE /SAPAPO/LOC_DESCR40,
        END OF T_SUPPLIERNAME.
DATA: WA_SUPPLIERNO TYPE T_SUPPLIERNO, IT_SUPPLIERNO TYPE TABLE OF T_SUPPLIERNO,
        WA_SUPPLIERNAME TYPE T_SUPPLIERNAME, IT_SUPPLIERNAME TYPE TABLE OF T_SUPPLIERNAME.
Retrieve the data from the select option
rt_SUPPLIERNO = wd_this->m_handler->get_range_table_of_sel_field(
                           i_id = 'ID_SNO' ).
dump raising when get_range_table_of_sel_field is called.
Thanks a lot.
Regards
Siva Mandapudi.

SELECT-OPTIONS 'EQ' vs. 'BT' performance issue

Hi Experts,
I have a query which uses select-options feature for a date range...
If we give a single date, the report runs instantly but if we use the date range it takes forever to get the reports even though both the low and high dates are the same....
We had informix earlier and it ran smoothly but now that we are on Oracle we are seeing this issue....
I am just trying to understand the performance issues with using the 'BT' clause compared to the 'EQ' clause...
Any inputs are appreaciated...
Thanks

Run the SELECT both ways (with high and low date the same for the second one), and in ST05, do a performance trace on each. Then use the 'explain' function to see if both are using the index.
Rob

SELECT OPTIONS ISSUE

Hi Experts,
I am using a select options for one field on my screen with extension which gives me an Arrow right next to the Field , now the issue is when i click on the Arrow a search help opens up for multiple selection.
In this search help there are "FROM" and ''TO" columns , i would like to disable or make that "TO" column invisible i know it is possible in ABAP through function modules but how can it be acheived in webdynpro.
I have gone through the "if_wd_select_options" class but couldnt find a solution for this , please lead me to the
right approach.
Thanks In Advance,
Chaitanya.

Hello Chaitanya Raju,
You must be resusing the Select-option component WDR_SELECT_OPTIONS
Follow below steps to create a select-options without ranges.
I think this is only possible with dynamic handling.
1)Acess the method: remove_all_sel_screen_items to Removes All Elements in Selection Screen.
2)build up new screen by calling the method: ADD_SELECTION_FIELD.
Before calling the 2nd step --> you will have to populate all the information that is required to build a select-option.
*add select options field
CALL METHOD wd_comp_controller->mo_so_handler->add_selection_field
    EXPORTING
      i_id                         = is_sel_op-m_id
      i_within_block               = is_sel_op-m_within_block
      i_description                = is_sel_op-m_description
      it_result                    = is_sel_op-mt_range_table
      i_obligatory                 = is_sel_op-m_obligatory
      i_value_help_id              = is_sel_op-m_value_help_id
      i_no_extension               = is_sel_op-m_no_extension
      i_no_intervals               = is_sel_op-m_no_intervals
      i_no_complex_restrictions    = is_sel_op-m_no_complex_restrictions
      i_as_checkbox                = is_sel_op-m_as_checkbox
      i_as_dropdown                = is_sel_op-m_as_dropdown
      it_value_set                 = is_sel_op-mt_value_set
      i_read_only                  = is_sel_op-m_read_only
      i_tooltip                    = is_sel_op-m_tooltip   .
You can refer to this link for more info.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/wdabap/multiple%252bdynamic%252bselection%252bblocks%252bin%252bwebdynpro-abap
Thanks,
Bharath.K

Issue In Providing 255 Charcters From The Selection Screen Select-Option

Dear Guru,
I am searching for table field with having length = 255 character.
which i want to use in select-option for proving data from the selection screen.
I have found the table myhlp and it associated field allvals which is having length = 255.
I am using it as below in my selection screen for the value to be provided 255 character long.
SELECTION-SCREEN : BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECT-OPTIONS   : s_mlbody FOR myhlp-allvals NO INTERVALS.
SELECTION-SCREEN : END OF BLOCK b3.
Now when i am going for the multiple selection option --> It is providing me the Multiple selection popup and giving me the provision of provide multiple line .
But the issue is that --> For a particular single value line in the popup i am able to enter only 45 charcters not 255 character.
But i need to put 255 charcter for particular line in a single value..
Please give me some guideline how resolve this or any other alternative way of reading the 255 charcter from the selection screen
Thanks & regards
Saifur Rahaman

Hi,
     As said by A@s selction screen with table control will be a good option.
design a custom screen with SUBSCREEN as screeen attribute using tcode se51.
For table control sample - go through Tcode ABAPDOCU - abap user dialogs-screens-complex screen- table control
Try Following,
REPORT Zsample .
controls: tc type tableview using screen 200.
parameters: p_user type myhlp-username.
data: begin of itab occurs 50,
      field1(255) type c,
      end of itab.
data: i_out type standard table of myhlp.
SELECTION-SCREEN BEGIN OF TABBED BLOCK MAX FOR 22 LINES.
SELECTION-SCREEN TAB (25) TABS1 USER-COMMAND UCOMM1
         DEFAULT SCREEN 200.
SELECTION-SCREEN END OF BLOCK MAX.
start-of-selection.
select * from myhlp into table i_out for all entries in itab
          where username eq p_user
                and allvals = itab-field1.
MODULE READ_ITAB INPUT.
insert itab index tc-current_line.
ENDMODULE.                 " READ_ITAB INPUT

Issue when reading values of Select-options for Dynamic F4

Hi All,
I have provided dynamic F4 help on class name (ESTCAT) and characteristic name (ATNAM). Both are select options with no intervals. The class name should be entered to get the F4 help for characteristic name, else an message would appear to select a class name first. My message is coming when i press F4 on characteristic name without giving any class name. This is correct but if i enter the class name after this message and do an F4 for characteristic name, it still shows the same message which is not correct. The reason is the class name entered is not captured in the FM RS_REFRESH_FROM_SELECTOPTIONS output table and it is captured only if i hit enter after entering the class name.
Is it possible to get the class name in the FM output without hitting enter or any other way to resolve this issue?
Thanks in advance,
Srilakshmi.

In Flow Logic
PROCESS ON VALUE-REQUEST.
FIELD itab-connid MODULE f4_get.
In Program
MODULE f4_get INPUT.
DATA : fnam TYPE string,
         fval TYPE string.
*         lin TYPE i.
DATA : BEGIN OF f4_tab OCCURS 0,
         carrid TYPE sflight-carrid,
         connid TYPE sflight-connid,
    END OF f4_tab.
   CLEAR lin.
GET CURSOR FIELD fnam VALUE fval LINE lin. " This gives the Current Line in Table Control
DATA : dynpread TYPE TABLE OF dynpread WITH HEADER LINE.
REFRESH dynpread.
CLEAR dynpread.
dynpread-fieldname = 'ITAB-CARRID'.
dynpread-stepl = lin. " You need to pass this line Value here
APPEND dynpread.
CLEAR dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname                               = sy-repid
      dynumb                               = sy-dynnr
    TABLES
      dynpfields                           = dynpread
   EXCEPTIONS
     invalid_abapworkarea                 = 1
     invalid_dynprofield                  = 2
     invalid_dynproname                   = 3
     invalid_dynpronummer                 = 4
     invalid_request                      = 5
     no_fielddescription                  = 6
     invalid_parameter                    = 7
     undefind_error                       = 8
     double_conversion                    = 9
     stepl_not_found                      = 10
     OTHERS                               = 11
IF sy-subrc IS INITIAL.
    READ TABLE dynpread WITH KEY fieldname = 'ITAB-CARRID'.
    IF sy-subrc IS INITIAL.
      SELECT carrid connid FROM sflight
            INTO TABLE f4_tab
             WHERE carrid = dynpread-fieldvalue.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield               = 'CONNID'
         dynpprog               = sy-repid
         dynpnr                 = sy-dynnr
         dynprofield            = 'ITAB-CONNID'
         value_org              = 'S'
        TABLES
          value_tab              = f4_tab
    ENDIF.
ENDIF.
ENDMODULE.                 " f4_get INPUT
Regards
Surendra P

Validation for Select-Option - Issue

Hi Experts!!
I have a select-option s_field on which I have written a validation under AT SELECTION-SCREEN. Now, the problem is that, if validation fails in second line of s_field, then to change it when we click on Extension, it's not allowing to enter but is throwing error message again and again as AT SELECTION-SCREEN is called.
Suppose, I have entered 2 single values as C001 and F001. s_field will have 2 entries. Now, C001 is a valid value but F001 is not. PFB my code:
LOOP AT s_field.
SELECT SINGLE *
FROM ztable INTO ls_field
WHERE field EQ s_field-low.
IF sy-subrc NE 0.
" Error Message
ENDIF.
ENDLOOP.
Now, for C001, sy-subrc will be 0. But for F001 sy-subrc is 4 and hence will throw an error. Now, to correct this, I am trying to enter into extension, but as this will be called again, I am unable to. Hope I explained it clearly.
I do not see any possibility to correct this. Can anybody please suggest if any workaround can be implemented?
Your help is highly appreciable.

Hi,
You can try the following:
AT SELECTION-SCREEN on s_field.
LOOP AT s_field.
SELECT SINGLE *
FROM ztable INTO ls_field
WHERE field EQ s_field-low.
IF sy-subrc NE 0.
MESSAGE s398(00) DISPLAY LIKE 'E' with 'ERROR MESSAGE'.
ENDIF.
ENDLOOP.
I hope this works as per your requirement.
<<point-begging removed>>
Edited by: micky prasad on Jan 6, 2012 1:00 PM
Edited by: kishan P on Jan 9, 2012 1:40 PM

Report text element as selection option

Hi,
I encounter a performance problem in a report program that include a self define fields in the selection option. I use the FM READ_TEXT to read those fields and compare with the user input.Then, eliminates those unmatched records with if else statement.
Here is my code:
SELECT-OPTIONS: S_WADAT FOR LIKP-WADAT_IST.
PARAMETERS: P_MAWB LIKE WA_REPORT-KZABE.
PARAMETERS: P_HAWB LIKE LIKP-BOLNR.
PARAMETERS: P_MATNR LIKE LIPS-MATNR.
PARAMETERS: P_LOT(20) TYPE C.
CLEAR: I_REPORT,I_DELIVERY,I_DELIVERY_INFO.
REFRESH: I_REPORT,I_DELIVERY,I_DELIVERY_INFO.
DATA WHERE_TAB(80) OCCURS 10 WITH HEADER LINE.
DATA: BEGIN OF LTEXT OCCURS 50.
          INCLUDE STRUCTURE TLINE.
DATA: END OF LTEXT.
IF NOT P_HAWB IS INITIAL.
    CONCATENATE ' BOLNR = ' WHERE_TAB INTO WHERE_TAB.
    CONCATENATE WHERE_TAB '''' INTO WHERE_TAB.
    CONCATENATE WHERE_TAB P_HAWB INTO WHERE_TAB.
    CONCATENATE WHERE_TAB '''' INTO WHERE_TAB.
    APPEND WHERE_TAB.
ENDIF.
IF NOT P_MATNR IS INITIAL.
    IF NOT WHERE_TAB IS INITIAL.
      CONCATENATE ' AND MATNR = ' WHERE_TAB INTO WHERE_TAB.
    ELSE.
      CONCATENATE ' MATNR = ' WHERE_TAB INTO WHERE_TAB.
    ENDIF.
    CONCATENATE WHERE_TAB '''' INTO WHERE_TAB.
    CONCATENATE WHERE_TAB P_MATNR INTO WHERE_TAB.
    CONCATENATE WHERE_TAB '''' INTO WHERE_TAB.
    APPEND WHERE_TAB.
ENDIF.
SELECT A1~VBELN
         WADAT_IST
         BOLNR
         C1~LIFNR
         B1~MATNR
         LFIMG
         BTGEW
         B1~CHARG
    INTO CORRESPONDING FIELDS OF TABLE TMP_REPORT
    FROM LIKP AS A1 JOIN LIPS AS B1 ON A1~VBELN = B1~VBELN
        JOIN MCHA AS C1 ON B1~MATNR = C1~MATNR
                           AND
                           B1~WERKS = C1~WERKS
                           AND
                           B1~CHARG = C1~CHARG
     WHERE LFART = 'EL'
           AND
           WADAT_IST IN S_WADAT
           AND
           B1~CHARG NE ''
           AND
           B1~WERKS = 'ABC'
           AND
           (WHERE_TAB)
SORT TMP_REPORT BY VBELN.
DATA: V_FLAG TYPE I,
        V_EXCLUDE TYPE I,
        V_LOT_EXCLUDE TYPE I.
V_FLAG = 0.
V_EXCLUDE = 0.
V_LOT_EXCLUDE = 0.
IF SY-SUBRC = 0.
* trim the parameter space
    SHIFT P_MAWB RIGHT DELETING TRAILING SPACE.
    SHIFT P_MAWB LEFT DELETING LEADING SPACE.
    SHIFT P_LOT RIGHT DELETING TRAILING SPACE.
    SHIFT P_LOT LEFT DELETING LEADING SPACE.
    LOOP AT TMP_REPORT.
      AT NEW VBELN.
        V_FLAG = 1.
        V_EXCLUDE = 0.
      ENDAT.
      IF V_FLAG = 1.
        PERFORM GET_HEADER_TEXT
              TABLES
                   LTEXT
              USING
                   'Z3IH'
                    TMP_REPORT-VBELN
        READ TABLE LTEXT INDEX 1.
        SPLIT LTEXT-TDLINE AT ':' INTO
        TMP_REPORT-VERUR TMP_REPORT-VERUR.
        READ TABLE LTEXT INDEX 2.
        SPLIT LTEXT-TDLINE AT ':' INTO
        TMP_REPORT-KZGBE TMP_REPORT-KZGBE.
        READ TABLE LTEXT INDEX 3.
        SPLIT LTEXT-TDLINE AT ':' INTO
        TMP_REPORT-KZABE TMP_REPORT-KZABE.
        READ TABLE LTEXT INDEX 4.
        SPLIT LTEXT-TDLINE AT ':' INTO
        TMP_REPORT-STABE TMP_REPORT-STABE.
        READ TABLE LTEXT INDEX 5.
        SPLIT LTEXT-TDLINE AT ':' INTO
        TMP_REPORT-PRONU TMP_REPORT-PRONU.
        READ TABLE LTEXT INDEX 6.
        SPLIT LTEXT-TDLINE AT ':' INTO
        TMP_REPORT-LADEL TMP_REPORT-LADEL.
        SHIFT TMP_REPORT-KZABE RIGHT DELETING TRAILING SPACE.
        SHIFT TMP_REPORT-KZABE LEFT DELETING LEADING SPACE.
        MOVE-CORRESPONDING TMP_REPORT TO WA_REPORT.
        MOVE-CORRESPONDING TMP_REPORT TO WA_TMPREPORT.
        V_FLAG = 0.
      ELSE.
        MOVE TMP_REPORT-VBELN TO WA_REPORT-VBELN.
        MOVE TMP_REPORT-LIFNR TO WA_REPORT-LIFNR.
        MOVE TMP_REPORT-MATNR TO WA_REPORT-MATNR.
        MOVE TMP_REPORT-LFIMG TO WA_REPORT-LFIMG.
      ENDIF.
      PERFORM GET_LOT_CODE USING
                                 WA_REPORT-MATNR
                                 '3LTU'
                                 WA_TMPREPORT-CHARG
                                 WA_REPORT-LOT.
      IF V_EXCLUDE 1 AND P_MAWB NE ''
        AND WA_TMPREPORT-KZABE NE P_MAWB .
        V_EXCLUDE = 1.
      ENDIF.
      SHIFT WA_REPORT-LOT RIGHT DELETING TRAILING SPACE.
      SHIFT WA_REPORT-LOT LEFT DELETING LEADING SPACE.
      IF P_LOT NE '' AND P_LOT NE WA_REPORT-LOT.
        V_LOT_EXCLUDE = 1.
      ELSE.
        V_LOT_EXCLUDE = 0.
      ENDIF.
      IF V_EXCLUDE 1 AND V_LOT_EXCLUDE 1.
        APPEND WA_REPORT TO I_REPORT.
        CLEAR WA_REPORT.
        CLEAR TMP_REPORT.
      ENDIF.
    ENDLOOP.

Hi,
i found one perfromance issue, try to remove the "INTO CORRESPONDING FIELDS OF TABLE " in your select statement, the order of the fields that you are fetching and the oreder for the fields in your internal table structure should be same, then you can remove "INTO CORRESPONDING FIELDS OF TABLE " and while fetching the fields reffer the table and fields you need to fetch here also you need to main the same order...like you have to do the same in where condition.
Reward if needful.
Thanks,
Sreeram.

Multiple select options validation at selection screen

Hi,
I have the requirement to create a selection screen with 3 select options. Two of them are cross-dependent. It is mandatory to fill one of them and it is not allowed to fill both. The third one is optional. I tried the validation at selection-screen on block... and I have a problem that search help buttons for select options react like execution buttons, when I press any of them I am getting one of errors instead of search help.
Any help on this issue would be appreciated.
Here is my code:
DATA:
      so_rbkp TYPE rbkp,
      so_mseg TYPE mseg.
SELECTION-SCREEN BEGIN OF BLOCK blok WITH FRAME.
SELECT-OPTIONS:
        s_fakt   FOR so_rbkp-belnr,
        s_matdok FOR so_mseg-mblnr,
        s_god FOR so_mseg-gjahr.
SELECTION-SCREEN END OF BLOCK blok.
INITIALIZATION.
SET TITLEBAR '0100'.
START-OF-SELECTION.
AT SELECTION-SCREEN on block blok.
      if s_fakt <> space and s_matdok <> space.
        MESSAGE 'Message1' TYPE 'E'.
      elseif s_fakt = space and s_matdok = space.
        MESSAGE 'Message2' TYPE 'E'.
      endif.
    ENDIF.

Only perform the check when user wants to execute or submit the program, not when pressing F4 or even Enter, but in a selection-screen event, before START-OF-SELECTION which were program would terminate in error :
TABLES: SSCRFIELDS.
AT SELECTION-SCREEN OB BLOCK b01.
    IF sscrfields-ucomm EQ 'ONLI'
    OR sscrfields-ucomm EQ 'PRIN'
    OR sscrfields-ucomm EQ 'SJOB'.
      IF s_fakt[] IS NOT INITIAL AND s_matdok IS NOT INITIAL.
        MESSAGE 'Message1' TYPE 'E'.
      ELSEIF s_fakt[] IS INITIAL and s_matdok[] IS INITIAL.
        MESSAGE 'Message2' TYPE 'E'.
      ENDIF.
    ENDIF.
(You could also always send the message, but using type 'E' for those function code and 'S' status for any other value.)
Regards,
Raymond

Error at transport in select option   is not followed by itab or value list

Hi All,
I have an issue with the following inner join. when i check with code inspector it is not showing any errors but i get the following error while transport.
"The In operator with SO_MATKL is followed neither by an Internal table nor by a value list".
This error appears after the system is unicode enabled is that it have any unicode significance please advice on this.
The following is the code snippet.
SELECT amatnr amtart aextwg amatkl bwerks bdispo b~ekgrp
    INTO TABLE tb_mara
    FROM mara AS a
   INNER JOIN marc AS b ON amatnr = bmatnr
   WHERE a~matnr IN so_matnr
     AND a~mtart IN so_mtart
     AND a~extwg IN so_extwg
     AND a~matkl IN so_matkl
     AND b~werks IN so_werks
     AND b~dispo IN so_dispo
     AND b~ekgrp IN so_ekgrp.

Hi Gopal
Am on UNICODE Enabled system and i dont have problem with below code. Please check, if you have used similar to this???
tables: mara, marc.
select-options: so_matnr for mara-matnr,
                so_mtart for mara-mtart,
                so_extwg for mara-extwg,
                so_matkl for mara-matkl,
                so_werks for marc-werks,
                so_dispo for marc-dispo,
                so_ekgrp for marc-ekgrp.
types: begin of t_mara,
         matnr type matnr,
         mtart type mtart,
         extwg type extwg,
         matkl type matkl,
         werks type werks_d,
         dispo type dispo,
         ekgrp type ekgrp,
       end of t_mara.
data: tb_mara type table of t_mara.
SELECT a~matnr a~mtart a~extwg a~matkl b~werks b~dispo b~ekgrp
       INTO TABLE tb_mara
       FROM mara AS a
       INNER JOIN marc AS b ON a~matnr = b~matnr
       WHERE a~matnr IN so_matnr
       AND   a~mtart IN so_mtart
       AND   a~extwg IN so_extwg
       AND   a~matkl IN so_matkl
       AND   b~werks IN so_werks
       AND   b~dispo IN so_dispo
       AND   b~ekgrp IN so_ekgrp.
Kind Regards
Eswar

Error while using selection option variable in the selection screen

Hi All,
I am facing an issue while using selection option variable in the selection screen for one of my reports.
Scenario: For the field "Region From" we need to have wild card logic () in tes selection screen, for example if we put "BE" in the selection screen for the field Region From then the query should be executed only for those "Region From" values which begin from "BE".
Approach: For the above requirement I have made a selection option variable for "Region From". This allows use wild card
But when the report is executed we get the following error:
"System error in program CL_RSR_REQUEST. Invalid filter on ETVRGNFR".
(ETVRGNFR is technical name of the info object Region From)
Though the report is executed it displays all the values for the field "Region From" irrespective of the selection given in the selection screen.
Please give suggestions / alternate solutions to crack this issue.
Thanks in advance
Regards
Priyanka.

Hi,
Try to use a variable of type Customer Exit and do the validation inside the exit to display according to your request.
This is just my view, i am not sure if u are already using this or Char. Variable.
Cheers.
Ranga.

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Select option greyed out for fields of custom DataSource (rso2, rsa6)

Hi
Why are several fields, in my custom DataSource (created in rso2) not available for select?
I do not think this is a permission issue, since several fields are selectable, but not all fields.
It is not the data type, since I see other custom DataSources that have the same data type, and it is selectable as a select option.
This is not a DataSource that was provided by SAP, it is completely custom, and uses a custom data definition (defined as a structure via se11), and a custom function.
I have read the responses to similar questions, but have not found an answer that explains how to make the field selectable for select.
What determines which fields can be selected for selection, and which fields have this option greyed out (not selectable)?
I have come across multiple answers, for similar questions, that suggest an abap program to directly update table roosfield.
Is this safe?
IF I choose this route will I need to run the update program on production, or will the change it makes to my dataSource transport with my transport?
(I can test this).
What I most need to know is If this suggestion is safe, or if it has side effects?
Thank you

Hi Eileen,
In Least case to enable the selection for the fields with the below program:
Below code is for your reference which will use to unhide objects in RSO2 or RSA6 for Data source( in code for BELNR, KUNNR, VBELN, BUDAT fields are unhiding for 0fi_ar_4 data source selection option) . Still need any clarifications let me know.
SE38: Create a program for ref below code.
REPORT ZNP_SELE_DS.
tables: ROOSFIELD.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BELNR'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'KUNNR'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'VBELN'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BUDAT'.
Thanks & Regards,
Srinu.Rapolu

Issue in Select Options

Similar Messages

Maybe you are looking for