Issue in Shared Services with corp user IDs

Hi,
I am facing an issue with corp user IDs in Shared Services. The issue is that I am able to add corp user IDs to a group but I am not able to remove some of them from the group for some reason especially those corp user IDs that were added few weeks or months ago.
What I noticed is if I add a corp user ID today and try to remove it today itself it is letting me do it but those corp IDs that I added to the group weeks before it is not letting me remove them. I tried to push the corp user ID from right hand side to the left hand side and then saved the changes. It shows the message that the group has been modified but when I go back again and check in the group I find the user there on the right side where it shows all user members. Not sure why this is happening.
Any ideas on this? Please do share your inputs.
Thank you.
~ Adella

Hello Mehmet,
Thank you so much for your response.
Well, I think I tried at both the places yet I am facing the same issue. If I add any corp user now and immediately take it off in minutes it lets me do it. But if I try to take out a user who was added to the group weeks ago it is just not letting me do it. It does give the messages that the gourp has been modified but when I come back again and look at the group its there.
Its weird and I am not sure whats going wrong. Is it some kind of a bug?
~ Adella

Similar Messages

  • Troble configuring Hyperion Shared Services with SQL Server 2005

    I recently installed SQL server (SQL SERVER 2005) in my machine and then am trying to install Hyperion (9.3.1) products. I started with Shared services. It was installed successfully. Problem is occuring when am trying to configure Shared service with SQL database using Hyperion Configuration utility (9.3.1)
    The error which is popping up is
    Unable to connect to the database for the product Hyperion Shared Services.
    Things which I tried from my end
    1. Made sure TCP IP Protocol was enabled in SQL server configuration server.
    2. hypuser was created in SQl server.
    3. hypdb was created in SQL server.
    4. Was having dynamic IP address so install Loopback adapter to obtain Static IP address and port.
    5. Port and IP address was correct.
    Let me know where I am going wrong.
    Any help will be greatly appreciated.

    Finally got it fixed firewall settings needed to be change : This document helped me a lot to troubleshoot the issue
    An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
    This problem may occur when SQL Server 2005 is not configured to accept incoming local and remote connections, which is disabled by default in SQL Server 2005 Express Edition, SQL Server 2005 Developer Edition and also SQL Server 2005 Enterprise Edition. To solve the connection forbidden problem, SQL Server 2005 needs to configure to allow incoming local and remote connections.
    Firstly, ensure that SQL Server 2005 is configured properly to allow incoming connections on the instance of database server, else enable and turn on the local and remote connections setting.
    Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
    On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
    On the “Surface Area Configuration for Services and Connections” page, expand Database Engine tree, click Remote Connections.
    Select Local and remote connections, or Local connections only which applicable only if there is no remote system tries to connect to the SQL Server, useful when you just trying to connect and authenticate with the server after installing.
    Select the appropriate protocol to enable to local and/or remote connections environment. To ensure maximum compatibility, select Using both TCP/IP and named pipes.
    Click Apply button when done.
    Click OK button when prompted with the message saying that “Changes to Connection Settings will not take effect until you restart the Database Engine service.”
    On the “Surface Area Configuration for Services and Connections” page, expand Database Engine, then click Service.
    Click Stop button to stop the SQL Server service.
    Wait until the MSSQLSERVER service stops, and then click Start button to restart the MSSQLSERVER service.
    Secondly, SQL Server Browser service has to be enabled to allow for local and remote connections if SQL Server 2005 is running by using an instance name and users are not using a specific TCP/IP port number in the connection string.
    Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
    On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
    On the “Surface Area Configuration for Services and Connections” page, click SQL Server Browser.
    Select Automatic as the Startup type to start SQL Server Browser service automatically every time system starts.
    Click Apply button.
    Click on Start button to start the service immediately.
    Click OK button.
    Finally, if remote computer needs to connect and access SQL Server, an exceptions in Windows Firewall included in Windows XP SP2 (Service Pack 2), Windows Server 2003 and Windows Vista needs to be created. If you’re using third-party firewall system, the exception rules also needed to be created to allow external remote connections to the SQL Server 2005 and SQL Server Browser Service to communicate through the firewall, else connections will be blocked. Consult the firewall manual for more details. Each instance of SQL Server 2005 must have its own exception, together with an exclusion for SQL Server Browser service.
    SQL Server 2005 uses an instance ID as part of the path when you install its program files. To create an exception for each instance of SQL Server, you must identify the correct instance ID. To obtain an instance ID, follow these steps:
    Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Configuration Manager.
    In “SQL Server Configuration Manager”, click the SQL Server Browser service in the right pane, right-click the instance name in the main window, and then click Properties.
    On the “SQL Server Browser Properties” page, click the Advanced tab, locate the instance ID in the property list.
    Click OK button.
    Then create an exception for SQL Server 2005 in Windows Firewall.
    Click on Start button, the click on Run and type firewall.cpl, and then click OK. For Windows Vista, type firewall.cpl in Start Search box and press Enter key, then click on Allow a program through Windows Firewall link on left tasks pane.
    In “Windows Firewall”, click the Exceptions tab, and then click Add Program.
    In the “Add a Program” window, click Browse button.
    Click the C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\sqlservr.exe executable program, click Open button. MSSQL.1 with is a placeholder for the instance ID that is obtained from previous procedure. Note that the path may be different depending on where SQL Server 2005 is installed.
    Click OK button.
    Repeat steps 1 through 5 for each instance of SQL Server 2005 that needs an exception.
    For SQL Server Browser service, locate the C:\Program Files\Microsoft SQL Server\90\Shared\sqlbrowser.exe executable program, and click Open button.
    Click OK button.

  • Issue in shared services

    Hi All,
    facing the issue with shared services, after run import/export utility(it ran for long time),can't find any users/groups in shared services, only admin user is present in native dir,otherthan this user, we dont have any users/groups in ND and MSAD. can somebody help on this.
    Thanks,
    :-)

    Hi,
    What version are you using ?
    Just to be clear are you saying that the utility only exported one native user and you expected it to export more ?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hyperion Essbase on Solaris & Security issue in Shared services

    I installed Hyperion system 9.3.1 in my dev environment. Every thing is working properlly.
    But i still have questions on couple of things.
    1) I installed essbase on solaris 10. I was just trying to configure the sql interface for ESSBASE.
    I went through the documentation. It says i supposed to get a file called libesssql.so.1
    But i can't able to see this file in ARBORPATH/bin location. But still I could able to load the data
    into sample Essbase application. My essbase is working fine. when i ran the script inst -sql.sh
    it created a file called libesssql.so in the ARBORPATH/bin location. But no libesssql.so.1.
    Can some one help me regarding this................
    2)In the shared services when i clicked under Hyperion system 9 BI+, i cant able to see
    any reporting related files to assign security. i am seeing a message saying refer to the security guide to confiure
    permissions for this application.
    I logged into the shared services with admin privileges.
    Please help me in this...........
    Thanks,

    Hi,
    What version are you using ?
    Just to be clear are you saying that the utility only exported one native user and you expected it to export more ?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Can't register Shared Services with workspace while using db2 9.1

    Hi,
    When I used Hyperion EPM to register workspace shared services with db2 9.1 pack 3,it's failed and workspace database configuration failed too.
    When I used db2 9.5, it's failed too.But workspace database configuration is success. When I excute the sentence as follow
    ===================================================================================
    db2 CREATE DATABASE HPSUX USING CODESET GBK TERRITORY CN COLLATE USING SYSTEM
    db2 connect to HPSUX
    db2 create bufferpool HPSUX_BP immediate size 256 pagesize 8k
    db2 create bufferpool HPSUX_BP_TEMP immediate size 512 pagesize 8k
    db2 terminate
    db2 force application all
    db2stop
    db2start
    db2 connect to HPSUX
    db2 "create regular tablespace HPS_TS pagesize 8k managed by system using ('hps_ts') extentsize 16k overhead 10.5 prefetchsize 16k transferrate 0.33 bufferpool HPSUX_BP dropped table recovery on"
    db2 "create system temporary tablespace HPS_TS_TEMP pagesize 8k managed by system using ('hps_ts_temp') extentsize 16k overhead 10.5 prefetchsize 16k transferrate 0.33 bufferpool HPSUX_BP_TEMP"
    db2 grant connect on database to user hypadmin
    db2 grant createtab on database to user hypadmin
    db2 grant bindadd,implicit_schema on database to user hypadmin
    db2 grant use of tablespace HPS_TS to user hypadmin with grant option
    db2 "update dbm cfg using DRDA_HEAP_SZ 2048"
    db2 drop tablespace USERSPACE1
    db2 force application all
    db2stop
    db2start
    =================================
    It's all work with db2 9.5 but still failed with db2 9.1.
    Can someone give me the suggestion?
    Thanks
    Edited by: [email protected] on 2009-7-23 上午12:25

    Start in Shared Services
    What have you Provisioned your user with?
    Are there Projects Registered with Shared Services? Have you Assigned Users to those Projects?
    I would suggest you refer to the Hyperion Security Guide as a starting point
    http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hyp_security_guide.pdf
    Wayne Van Sluys
    TopDown Consulting

  • How do I stop sharing mail with other users on my computer

    How do I stop sharing mail with other users on my Macbook pro?

    You may have to set up different user accounts in the computer if you wish to
    continue sharing the computer among other people, and only use the Mail app.
    Otherwise, if you use a webmail such as yahoo, gmail, or other, just use a browser
    and login each time; then there is no saving of your email to the computer as such.
    I've never used an email client software, nor had an ISP based email account. So
    my numerous computers have never downloaded email into software. No loss.
    But the answers do include setting up extra user accounts, not admin level, so the
    other users do not mess with the operating system; a standard account or just a
    guest account to use a browser to access web-based login email accounts, works.
    There are third-party email client for OS X, some are free applications, others are
    part of a larger browser product, such as SeaMonkey, & other Mozilla derivatives.
    They provide an email segment or client aspect; unlike Firefox that's a browser.
    Setup information should be within the Help viewer in the computer itself. Or by a
    simple search online, including the OS X version and any email client software
    your computer may have installed. Some browser software includes email client.
    Also there are several ways to go in this matter. I don't see questions, only answers.
    To learn how the Mail application works, if you want to import everyone's mail, then
    figure how to set up user accounts in the OS X. Or use web-mail & login by browser.
    Hopefully you can find the best solution for the unasked question.
    Good luck & happy computing!

  • After SPNEGO is activated other existing services with Technical user not working

    Hi All,
    We have activated SPNEGO, One of our existing service with Technical user is not working.
    When SPNEGO is disabled it works.
    Regards
    Ram

    Hi Patrick
    We are using SSO. and domain controller has service user. We are in 7.31 PI as Java so user mapping is not done but have same users in Active directory.
    SSO is working fine. But, once specific service is not working where we are using technical user when SSO is active and it is working when SSO is inactive.
    Regards
    Gangula

  • Short dump using CS_BOM_EXPL_MAT_V2 with different user ids

    Hi
    We are getting a short dump in our program when using FM'CS_BOM_EXPL_MAT_V2' and this is happening only for super user roles but not with regular user ids in production. We are not able to identify the solution yet, and it needs to be resolved as quickly as possible. Anyhelp, really appreciated.
    Thanks
    Anil
    Here is our code:
      CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
        EXPORTING
          aumgb                 = 'X'
          capid                 = 'PP01'
          datuv                 = p_valfrm
          ehndl                 = '1'
          emeng                 = 1
          mbwls                 = ' '
          mehrs                 = 'X'
          mmory                 = '1'
          mtnrv                 = p_matnr
          stlal                 = p_stlal
          stlan                 = p_stlan
          werks                 = p_werks
        TABLES
          stb                   = i_stb
          matcat                = i_matcat
        EXCEPTIONS
          alt_not_found         = 1
          call_invalid          = 2
          material_not_found    = 3
          missing_authorization = 4
          no_bom_found          = 5
          no_plant_data         = 6
          no_suitable_bom_found = 7
          conversion_error      = 8
          OTHERS                = 9.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.

    Hi senthil,
    1. I suppose u want to explode the BOM.
    2. CS_BOM_EXPLOSION
       use the above FM
       in the below mentioned fashion.
    3.
      CALL FUNCTION 'CS_BOM_EXPLOSION'
       EXPORTING
       capid                       = 'PP01'
       emeng                       = bmeng
       datuv                       = sy-datum
       mtnrv                       = matnr
       stlan                       = '1'
         werks                       =  werks
         mehrs = 'X'
    IMPORTING
      TOPEQUI                     =
      TOPMAT                      =
      TOPTPL                      =
      DSTST                       =
        TABLES
          stbd                        = stbd
          stbe                        = stbe
          stbk                        = stbk
          stbm                        = stbm
          stbp                        = stbp
          stbt                        = stbt
    EXCEPTIONS
       alt_not_found               = 1
       call_invalid                = 2
       missing_authorization       = 3
       no_bom_found                = 4
       no_plant_data               = 5
       no_suitable_bom_found       = 6
       object_not_found            = 7
       conversion_error            = 8
       OTHERS                      = 9
    regards,
    amit m.

  • Unable to access Runtime Services with admin user

    Hi all,
    Trying to access runtime services with admin user returns a "Authentication Denied
    The username or password has been refused by Runtime Services. Please try again."
    Credentials are correct. It seems to be some kind of lockout. I´ve copied this admin user entry in ldap and named it admin2, this "new" user can perfectly log.
    As it could be a lockout I have unlocked the user although the proper tab said there was no locked user.
    The realm is in a openldap.
    Any hint would really be appreciated.

    Hi all,
    Trying to access runtime services with admin user returns a "Authentication Denied
    The username or password has been refused by Runtime Services. Please try again."
    Credentials are correct. It seems to be some kind of lockout. I´ve copied this admin user entry in ldap and named it admin2, this "new" user can perfectly log.
    As it could be a lockout I have unlocked the user although the proper tab said there was no locked user.
    The realm is in a openldap.
    Any hint would really be appreciated.

  • Shared Services with OAM ?

    Plannign a green-field 11.1.2.2 implementation and want to understand whether it will be possible (or indeed is possible in current versions) to integrate Shared Services with OAM ?
    Thanks is advance !
    Alasdair
    Edited by: 919830 on 09-Mar-2012 03:25

    Hi,
    Yes is the answer, but I am not sure how can it be done. But the document of essbase states the below
    Security: Integration with Oracle Access Manager, Oracle SSO, Desktop Kerberos Support, OID as the Native Provider
    Sandeep Reddy Enti
    http://hyperionconsultancy.com/

  • Start Database Service with another user

    Hi Everyone ,
    i've a little problem with the Oracle 10 Console Service on a W2K3 server.
    I want to start that Service with another user as "Local System"
    I created a local user that is member in the "ORA_DBA" group and in the local Admin Group. But the Service won't start. When i start the service with the "local system" account it starts.
    Is there another possibility to start the service this way or where is my error ?
    Greetz Byte

    Hi
    I searched metalink and came across a note that mentioned following actions. I hope it works in your situation.
    1. Launch locally on the windows host the Local Security Policy tool
    2. For the domain user or local user starting the Management Agent service
    Give the following Advanced Privileges
    - Log on as a batch job
    - Act as part of the operating system.
    - Adjust memory quotas for a process
    or (for windows 2000 and Windows NT)
    - Increase memory quotas"
    - Replace a process level token.
    3. Ensure that the same local user or domain user starts all the other Oracle Windows services monitored by the Management Agent
    The same fix must be applied for the standalone dbconsole service on windows.
    Rgds
    Adnan

  • Sharing Lion amongst computers in the same household with diff User IDs

    I have 3 computers in my family with different User ID's. I have already installed Lion on my macbook and no longer have the application prior to installation so I can't install it prior to the installation or after it's just been downloaded.  can I get some guidance as to how I can install it on my Mom's macbook as well without paying for all of the macbooks.
    Thank you

    Sheila,
    I believe you can download and install it as many times as you want on as many computers in your household as you want using a single iTunes/App Store account. When you say "different User ID's," are you referring to the Mac OS X login ID's for the machines, or iTunes account login ID's that you use for the App Store? If the App Store on your Mom's computer is logged in with her iTunes ID, just log out and log back in with your iTunes account ID and you should be able to download Lion on that computer for free. Just go to the "purchased" tab in the App Store and it should be there for you to download. Then you can log back out of the App Store and log your Mom back in. Ditto for the other machine. The Mac OS X login ID's are irrelevant I think. It is the Mac App Store/iTunes account that the download is tied to.
    Steve

  • Error configuring shared services with Oracle 11g database

    I've installed Hyperion EPM 11.1.1.3 and orale 11g successfully. My problem though is that when i tried to do the configuration,
    the error message states 'Unable to check Shared Services database existence: an error occured.'
    ---------My Environment:--------
    EPM Server: Windows Server 2003 SP1 32-bit
    RDBMS: Oracle Enterprise Edition 11g (running on same server 2003)
    Oracle Client: 11g (full client install)
    SID name :- orcl
    ------------Here are the components that I've installed--------
    - V17397-01(EPM Foundation Services p-1)
    - V17369-01(EPM Foundation Services p-2)
    - V17370-01(EPM Foundation Services p-3)
    - V17371-01(EPM Foundation Services p-4)
    - V17389-01(server)
    - V17388-01(Client)
    - V17390-01(Provider Service)
    - V17378-01(Financial Reporting)
    - V17380-01(Web Analysis)
    - V17398-01(EPM Architect)
    - V17402-01(Smart View for Office)
    all files are extracted in a single folder using winrar tool.
    I can't proceed with the shared services configuration because in just the first page of it, I'm encountering the error Unable to check Shared Services database existence: an error occured.'
    I believed the shared services is bundled with the foundation if I'm not mistaken, because I can't find any download related to it on edelivery site.
    I tried to configure only the Foundation components but the '*Comman setting*' & '*configure database*' are grayed out so I have no option but to figure out first this shared services configuration.
    below are the logs
    ---------------configtool.log--------------
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, validate
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, connect test
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, driver set
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, server= hyperion
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, whiteSpace remove
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, begin test cycle
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, define driver
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, make connection
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, set URL
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, connection is NOT null
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.DBConnectionForm, DEBUG, DB type string = Oracle
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.AbstractProductDBConfigurator, DEBUG, JDBC driver class is hyperion.jdbc.oracle.OracleDriver
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.AbstractProductDBConfigurator, DEBUG, Connection URL: jdbc:hyperion:oracle://hyperion:1521;SID=orcl
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, validate CREATE_NEW, no registry DB exists, create it
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.hit.registry.RegistryConnection, ERROR, SQL Exception [Hyperion][Oracle JDBC Driver][Oracle]ORA-01031: insufficient privileges CAUSE null
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, ERROR, com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Unable to check Shared Services database existence: an error occured.
    ------------configtool_err.log------------
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.hit.registry.RegistryConnection, ERROR, SQL Exception [Hyperion][Oracle JDBC Driver][Oracle]ORA-01031: insufficient privileges
    CAUSE null
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, ERROR, com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
    (Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Unable to check Shared Services database existence: an error occured.
    Hope to here from Some one.
    Any help would be appreciated. Thank you.

    Thanx John for your kind reply. i reffred your other posts and those are very helpfull for me.
    I don't have any previous ver. of Hyperion. and i created a new database 'Orcl' for configuring the shared services and given the user name as 'hss'. i also tried to delete my old database and and reg.properties file from Hyperion Dir u suggested in some other post. but still its not working.
    Today I have started again with fres installation of Windows Server 2003 oracle 11g EPM 11.1.3.
    Also I m Installing this on VMware. I hope this is not the issue as i already installed Microsoft Loopback Adapter.
    I will let you know the updates.
    but still looking forward for your Kind help.
    Edited by: Gaurav_Choudhari on Jul 5, 2010 12:37 AM

  • Error While Configuring the Shared Service with Active Directory

    Hi All,
    I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
    "EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
    The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
    But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
    "The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
    Example: cn=admin,dc=myCompany,dc=com
    But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
    Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
    Thanks in Advance,
    Sunil

    Thank you All,
    i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
    after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
    Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
    Thank you once again Friends....
    Regards,
    Sunil...
    Shantan....

  • Issues in Shared Services, Workspace & Financial Reporting

    Hi All,
    I am working on hyperion 9.3.1.
    I have two issues. Someone help me in this sistuation
    1) In shared servcies, I cant able to access my planning application. If i click the planning application its *"Loading for a long time"*
    Note : I updated the Patches *8527948* for 9.3.1. Still i am facing the error.
    2) I created two classic applications in planning and registered with shared services. I cant see the planning application in workspace.
    3) I can't access Financial Reporting through workspace. Please let me know the url for FR.(http://localhost:8200/hr/index.jsp - If i give this url its redirect to workspace)
    My Installation Order:
    1) Shared Services
    2) Essbase
    3) EAS
    4) Report and Analysis UI Services
    5) Report and Analysis
    6) Planning
    Please guide me in this situtation.
    Thanks,
    PC

    Hi,
    On the issue of not seeing the planning applications, have you tried reconfiguring the web server part for Reporting & Analysis in the config utility, you probably have to do this if you configured planning after reporting & analysis
    What do you mean you can't access Financial Reporting ? You need to create a report using the Financial Reporting Studio client then save the report to workspace.
    The report is then accessed through explore in workspace.
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • Strange inserts in attachement file

    Hi, I am making a program with send an email with attachement file. Everything works well except data in the attachement file. Code: REPORT  ZTEST.   DATA: DOCUMENT_DATA   LIKE SODOCCHGI1 OCCURS 5 WITH HEADER LINE.   DATA: PACKING_LIST    LIKE SOPCKL

  • BB10.3 on Passport: Bug in visualisation after increasing font

    I have increased for my old eyes the font in the settings to 12 point. Now there seems a problem in the visualisation. For example if i go to my contacts there isnt´any possiblity to see all the details of a contact because the dividing lines seem no

  • 1.1 vs 1.4 : SDK API's and how they relate to JVM versions

    Hey all, I'm hoping some Java expert/guru/enthusiast can help me understand a little (OK, a lot) more about designing applets for backward compatibility . My situation is that I need to design applets which are compatibile with the built-in Java feat

  • SAP NW enterprise Search for windows

    Hello All,   Can anybody clarify on the same can we install SAP NW enterprise Search 7.0 EH4 on windows Environment.  I found in the documentation it only supports Unix right now. Mani

  • Please help me to write a function for this requirement!

    Hi,     I have created a stored procedure which accepts 2 input parameters (param1 & param2 ) and its output is 'Score' Eg: Exec uspScorecalculation StudentID,DeptID  output: 85 Now, My requirement is , I want to populate this value as one of the col