Issue in Synchronizing with Exchange 2010 Hub and Edge server

Dear Sir,
We have an issue with the installation of Exchange edge server 2010 SP1.
We installed exchange edge server on DMZ but unable to do the subscription between edge server and hub server. Tried to check from the edge server whether the ports (50389 & 50636) are listening. Both are listening without any issues. After the
edge subscription is done and when pass the command start -edgesynchronization we are getting the below error:
Unable to contact the edgesync service.
+catogary :ReadError: (:) [start-edgesynchronization], Endpoint not registered exception
+Fullyqualifiederrorid : FE1A5BE2, Microsoft.Exchange.Management.Edgesync.SyncNowTask
Please help me in rosolving the issue with regards to Edge Server.
Thank & Regards
Suraj Sreekumar

Hi Suraj,
Try to Re subscribe the HUB & EDGE serve, Create XML file on the EDGE server, Removed the Edge subscription from the HUB server and Restart the Transport & ADAM service
Then Ran Start & Test-EdgeSynchronization cmdlet on the Exchange Management Shell on Hub, again Restart the Transport server on the HUB & ADAM service on the EDGE .
White Paper: Edge Subscription and Synchronization
http://technet.microsoft.com/en-us/library/bb310755(EXCHG.80).aspx#EdgeSyncsynchronization
Anil

Similar Messages

Problem with Exchange 2010, Q10 and attachment

Q10 & Exchange 2010; unable to download and forward attachment
Hi all,
i have a problem with Q10 phone, sync with Exchange 2010 with activesync (not BES) all seem ok but unable to download attach.
When press "download" didnt start. Unable also to forward same message but i think is a chainde problem.
Same message from desktop (outlook) or OWA is ok and attach downloadable.
This is the only Q10 present in company for test so i cannot compare to others BB.
All other users connected to the exchaneg server have iphone & ipad no issue result. Email service seem ok also for desktop.
Firmware was updateted about 10 day ago.
Any idea for me?
Thanks

Hi marcottt,
Could you provide more detail please so I can better assist?
Do you have this issue with all attachment types? If not, what type of attachment are you having this issue with and what size is the attachment?
What happens when you try to forward the message? Is any error received?
Does removing and re-adding the email account make any difference?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

My iPhone 4 with iOS 7.0.4 not synchronizing with Outlook 2010 contacts and calendar after upgrading to iTunes 11.1.4.62

For a couple of years past, my iphone 4 has been working with itunes and syncing with Outlook using USB for contacts and schedule. It currently uses ios 7.0.4. Recently, I think after updating itunes to 11.1.4.62, the sync is not working properly. The itunes backs uo the iphone, starts the sync of contacts which just goes on and on for hours. Asking itunes to sync only calendar also produces no results. I am very concerned as I have a very large >2000 contact list.
I tried a soft reset of the iphone; resetting sync history in itunes; going back to an earlier version of itunes. switching off icloud in the iphone settings; trying to sync through WiFi. Nothing seems to help. The same difficulty persists.
Can anyone please give me a workable solution, before my contact lists in Outlook and iphone diverge disastrously?

Hi - i tried the things in the link in your post and still can't see the iPhone4 in iTunes.
I did see the iPhone4 in iTunes PRIOR to upgrading to iTunes 11.1.4.
My Windows 8.1 laptop recognizes the iPhone4 as a device and the iPhone4 recognizes the laptop because it asks whether to 'trust this pc' or not. I click the 'trust pc'. I stopeed the Apple Mobile Services program and restarted it ... and the iPhone4 still does not show up in iTunes.
What's next? uninstall iTunes & all Apple programs and re-install them?
Cheers ... John

Calendar fails to sync with Exchange 2010

I frequently encounter issues with Calendar (iCal) not synchronizing with Exchange 2010. I get the ! error triangle beside the account and it will attempt to "revert to server" or "try again" but ultimately failes. After several attempts, I finally got this message:
I am only assuming this is a persistent issue but not sure why all of a sudden my email address would return as invalid. Anyone else see this and is there a work-around?
Thanks

Hi and Welcome to the Community!
Can you expand on that please? As in, what exactly, tells you it doesn't sync anymore? Did you re-configure the Desktop Software? If so, what did that present? If not, well, you need to since you've changed your Desktop Organizer app...
Let us know.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Weird issue with Exchange 2010 Room Mailboxes - allows multiple booking of the created meeting rooms

Hi,
we are facing weird issue with Exchange 2010 Room Mailboxes
it allows multiple booking of the created meeting rooms.Sometime we are not getting acceptance or declined mail but and we could see our meetings has been booked at slot.
for e.g.
User A booked room1 with weekly recurrence for time 4pm to 5pm., and User B made his booking other day,without realizing that user A meeting is exists.
Neither of user A nor user B got declined/rejected emails.
please sahre guidelines if anyone known to this issue.
Note - Allow Conflict booking is disabled already :) but still have issue
Thanks,
NPratik

Hi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users

Real-world experience with Exchange 2010 SP3 RU5+ and Powershell 4?

The support-ability matrix for Exchange (http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx) says Exchange
2010 SP3 RU5+ and Powershell 4 are compatible. But, there is very little actual discussion about how well that works.
I use Powershell extensively for mission critical and somewhat complex processes, with Exchange 2010 on 2008 R2 and AD access/reads/updates.
Can I get a summary of the caveats and benefits from someone who has actually done this in a
real-world/production scenario (more than one server, managing from a separate non-Exchange server), and who has scripting experience with this configuration?
Also, how has this affected EMC operations?
As always thank you in advance!

I believe the matrix states that its supported to install Exchange into an environment where __ version of WMF is present. Exchange 2010, launched from a Win 2012 server, reports version 2.0 when you call $host. For example, calling the ActiveDirectory
module from EMS on an Win 2012 server (ps 3.0) fails.
I'll double check the extent of this scenario and get back to you.
Mike Crowley | MVP
My Blog --
Planet Technologies

Outlook 14.4.8 not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox"

Outlook 14.4.8 on iMAC Retina and Yosemite 10.10.2 is not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox".
Accessing Mails with Webbrowser and from Windows Outlook is working correctly.
All Macs (also the ones with OS 10.6.8) do not anymore show any new messages in inbox.
Restarted Server, tried to disable autodiscover on macs and deleting/adding account and repairing database does not fix the problem. Also restarted server several times.
We have the same problem on 2 imacs retina with yosemite and on 2 mac pro with 10.6.8 and different office 2011 versions.
i tried to configure the exchange account in apple mail on yosemite and it also states "connected" and does list some folders but no new mails are getting in.
Windows clients and outlook on them works and syncs fine, and also when connecting via webbrowser at owa it must be a mac-specific/webdav issue.
exchange 2007 Sp3 Version 8.3 (bild 83.6) and Update Rollup 15 for sp3 (automatic updates "HIGH" for server and clients)
there is one update popping up again and again even after everytime successull installation: Windows Mlicious Software Removal Tool x64 - October 2010.
i tried to configure a new user with empty mailbox and configured it with microsoft mail (mac - yosemite) as exchange and was able to send a mail from there (even if quite delayed).
but there are not coming in any mails.
same exchange accounts triggered by imap do work and also via owa.
Exchange Accounts in Outlook for MAC and also in Mail (Yosemite) do show the folder structures but there is no mails showing up. I can send mails from the exchange accounts created but they seem to be processed with a delay of like 15minutes and outlook
is giving error "end of file reached" but messages are send after some time.
Does seem like EWS is extremely slow, to slow perhaps to sync and therefore ending in timeout.
Also i cannot reach the server from externally over ssl https 443. if testing port 443 of exchange from outside the port seems closed even firewall settings of sbs 2008 and sonicwall ports are correctly open.
could it be there is something in regarding webdav which is very slow and leading to timeouts ?
in application log i do have the following two information events every few minute:
The Exchange Web Services started successfully. Event ID 1
and
Process STORE.EXE (PID=3688). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
SERVER.org.local CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
Errors in Application log:
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section
The entry <C:\WSUS\WSUSCONTENT\CONTENTFOLDERACLSCHECK.TXT> in the hash map cannot be updated.
An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 69447
Also outlook 2011 clients are asked by time to time to reenter pwds and errors like "connection is closed. 13"
Faulting application taskeng.exe, version 6.0.6002.18342, time stamp 0x4cd34898, faulting module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0xc000071b, fault offset 0x0000000000082445, process id 0x3288
Certificate Services Client Provider pautoenr.dll raised an exception. Exception code 3221225477.
Backup Exec:
FULL_BACKUP -- The job failed with the following error: A failure occurred querying the Writer status.
Volume Shadow Copy Service error: A critical component required by the Volume Shadow Copy service is not registered. This might happened if an error occurred during Windows setup or during installation of a Shadow Copy provider. The
error returned from CoCreateInstance
Exchange VSS Writer (instance 2d932ef8-6319-4ab8-a45f-1242480b44ad:15) failed with error code 1295 when processing the backup completion event.

Hi,
Since Outlook running on Windows works well, it seems an issue on the Mac side. I suggest ask Mac for help so that you can get more professional suggestions.
More information for your reference:
Please try to verify whether there is any expired certificate from the computer personal store.
If it is the case, please remove them.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

After recover of Exchange 2010 hub; Outlook not connecting

Exchange 2010 sp 3, Windows Server 2008 R2 sp1
one of my hub (1 of 2) server failed this morning (no thanks to KB2993651) so in a fit of hurry, i reformatted the server,
deleted the computer account from AD and reinstalled Windows Server 2008 R2 sp1. here is what i did to recover:
from the command line of the server: netsh int tcp set global chimney=disabled; netsh int tcp set global rss=disabled
HKLM\System\CurrentControlSet\Services\Tcpip6\Parameters -> DWORD-32 (DisabledComponents) with a value of 0xffffffff
made the server a member of "Exchange Install Domain Servers", "Exchange Trusted Subsystem", "Exchange Servers"
and then i issued the command: setup /m:recoverServer
it went fine well. i also joined it back to Windows NLB cluster.
but when it's online, some Outlook users aren't able to connect. OWA also fails. i can't figure out what's wrong so for now i shutdown the server and am using only one Hub server.
maybe i missed a step? appreciate any help.
EDIT: in the same hub server was my DAG witness folder. i don't know if this has implications now that i lost the DAG witness server (this hub server)

Did you try starting the server after connecting to network ?
You could try starting the server after connecting to network and import the certificate and configure the same URLs as per my first post. You cannot open EMS and EMC if you start without network connection.
Use this URL to get the command to request new certificate. After running this command in EMS you will see a new request https://www.digicert.com/easy-csr/exchange2010.htm
For installing certificate please check thishttps://www.digicert.com/ssl-certificate-installation-microsoft-exchange-2010.htm.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Edge 2013 sp1 with exchange 2010 organisation.

Dear reader,
I have an exchange 2010 sp3 organisation with 1 client access server with hub transport and a 2 node DAG. Can I install a stand alone exchange 2013sp1 Edge role on a seperate machine in DMZ and subscribe the exchange 2010 hub transport to it. This
in preparation to move to exchange 2013sp1 later this year. The current exchange 2010 edge role is installed on a TMG 2010 machine. Since TMG 2010 is dropped and we also have issues with the current edge's mailflow, i'd like to have a dedicated Exchange edge.
Best regards,
Ruud Boersma
MCITP Enterprise administrator

Sure, You can install Edge of Exchange 2013 on a dedicated server in DMZ and subscribe with Exchange 2010 Transport server.
Or you can allow the Existing Exchange 2010 Edge server to serve your internet mail flow till the time you implement Exchange 2013 in the environment. I would suggest Exchange 2013 CU5 as a lot of issues were fixed in that which were identified with Exchange
2013 SP1.

Some help with migrating exchange 2010 to exchange 2013 + installing another exchange 2010 to be edge-forefront-proxy server

Hi guys (and girls)!
Hear me up. The idea is like this:
A friend of mine has currently Exchange 2010 SP3 in his environment with Forefront Protection installed on it. As we all know Forefront Protection is discontinued in Exchange 2013 environment because Exchange 2013 on-premisses is using integrated tool for
doing that, but a friend of mine would really like to stick with Forefront Protection because it is "much better tool" then integrated stuff in 2013.
Ok, so here's the idea. Exchange 2010 SP3 with Forefront is installed on Phisical machine (so, not virtualized) on 2008 r2 std OS. We decided to move to Exchange 2013 because we wanted to achieve DAG on Exchange 2010 but we realized that is not possible
because 2008 R2 STD OS does not support failover-clustering functionality, but you are able to achieve that on newer OS for example 2012? Ok, so we bought another server, where we are planing to install Vmware Esxi and put two virtual machines on it.
One Will be 2012 r2 STD OS with Exchange 2013 on it, the other Will be 2008 r2 STD with Exchange 2010 Edge role + Forefront on it. We are planing to move Exchange 2010 production server to virtual machine Exchange 2013, and newly virtual machine
with Exchange 2010 edge server will only be "a kind of Proxy server with Forefront functionality". What concers me?
Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
bostjanc

Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
already answered by PS CL above
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
No it does not as long you don't make any changes on send/receive connector and do the EdgeSubscription. As soon as you do the Edge subscription there will be send/receive connector created, so pay attention how to setup the Edge Server.
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
Just install the Edge Transport Server and make sure you install ADLDS services.
as you have mentioned you are doing to install both Mailbox and Edge server on the same VMware - it is a single point of failure.
Where Technology Meets Talent

Exchange 2013 DLP with Exchange 2010 mailboxes

Ive got an Exchange 2007/2010 environment. I've been looking at Exchange 2013 and am interested in the DLP funtionality.
There are no plans to move mailboxes to Exchange 2013 but would it be possible to install an Exchange 2013 CAS/Mailbox server in my environment and route email through it to make use of the DLP ?
Current environment consists of Exchange 2010 DAG, Casarray and hub transport servers, and Exchange 2007 mailbox servers, CAS and hub transports. Mail to the internet is sent to a smarthost.
Thank you.

Hi Maria,
DLP Policies are actually a specific transport rule. Since the transport rules with Exchange 2010 didn’t provide such feature to monitor and check the e-mail
content, I am afraid, in theory, it’s not possible.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Setup /m:RecoverServer with exchange 2010 sp3

Hi. i need to recover hub and cass server for exchange server 2010 SP3 organization.
but when i try to run this command, i receive this error:
"Exchange Server 2010 build 14.3.123.4 or later must be used to perform a recovery of this server."
So.. i need to run this command from the exchange server 2010 sp3 iso?
i think that not exists.
Any other idea?
thanks.

Hi,
You can download the full installation file of Exchange that matches with the current version of Exchange you installed and run recovery. The recovery needs to be the same version as was previously used.
Kent Huang
TechNet Community Support

TS4532 Any idea on the timing of the software update to fix the IOS6.1 problems with Exchange 2010?

Any idea on the timing of the SW update to fix the IOS 6.1 problem with Exchange 2010?
victor

In reply to Macca7275
We moved from Blackberry to iPhone for 120 services in 2010. We have just renewed the iPhone fleet. Security was the issue for the business that employs me (lawyers). When comparing the two, Blackberry performed without issue most of the time but we experienced a number of issues with the trackballs on individual phones. This was, however, the first of the Blackberry Bold models. The expense behind the scenes was one of the major factors for the move. It was cheaper to run Exchange and iPhones than Blackberry services. Our lawyers on the whole adopted the iPhones and a number have become quite proficient at using them. We ensured that we had a means to securely wipe and lock business phones. We chose Mobile Iron for this purpose but you will find other products to do the same job. Cost is probably going to be the deciding factor here. Our only negative factor was butterfingers resulting in smashed glass with the iPhones although I have had one user drown several phones.

Exchange 2010 Hub Transport

Hi Spiceheads, I thought that with Exchange 2010 mailboxes will always use the local hub transport on that server first but alas I was wrong. We need to migrate an exchange 2010 box to virtual hardware, I setup and configured a new server with the old one still live, as soon as I installed the HT role on the new server mail immediately started flowing out of it first even though every mailbox and DB was still on the old server, of course this ended up causing our mail to get flagged as spam as the spf records didn't match, thankfully this lasted all of 3 minutes while I uninstalled the role from the new server, My question is - is there a way to add the HT role but still have mail flow out of the old HT server vs the new one?
I want to add the role so I can configure all the options first, including some third party software we have...

Hi allAfter a rather heated conversation with our MSP I come to you for guidance.We've recently acquired another business and need to add two new sites plus a butt hosted server to our network. The current layout is as follows (forgive my terrible diagram):Top is our business, bottom is the one we've purchase, red indicates how the VPNs are structured. We have extensive on-premise infrastructure at the Main Office (top left) so we are planning to retire my butt hosting once our systems have been merged but in the meantime we need to be able to access their system and vice versa so I am hoping for the following:In summaryNew link from my butt hosting to the Main OfficeNew link from the alt-main office to Main officeNew link from the new "other site" to Main OfficeNow, our VPNs are controlled by our MSP, after a two week delay waiting...

Does Edge transport server for Exchange 2013 work with Exchange 2010?

Hello everyone,
I want to install Edge transport server for my Exchange servers,
Could you tell me if Edge transport server 2013 works with Exchange 2010?
Thank you in advance

Hello
tip:
https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
2 If you want to create an EdgeSync
Subscription between an Exchange 2010 Hub Transport server and an
Exchange 2013 SP1 Edge Transport server, you need to install Exchange
2010 SP3 Update Rollup 5 or later on the Exchange 2010 Hub Transport
server.
sorry my english

Issue in Synchronizing with Exchange 2010 Hub and Edge server

Similar Messages

Maybe you are looking for