Issue in table maintenance generator

Hi,
We have tranported a new table to Q from devlopement.
But the table maintenance generator is not tranported.
How can we tranport it again form the devlopement.

Hello,
In this case you need to generate table maintenance object for the required table again.
Save that object in new transport request.
Now, You can either directly release this new request and import it in Q system or
merge the new request with existing released request and import new created request into Q system.
Check if this help,
Thanks,
Augustin.

Similar Messages

Table Maintenance Generator Issue

Hello Experts,
I have created and activated a Z-table ZRATE with 4 fields.
Field Name   |        Field Type
MANDT          |      MANDT
ZRATE           |      ZRATE (DEC 5, 4)
FROM_DATE |     DATAB
TO_DATE       |     DATBI
And then I generated the table maintenance via SE54. When I go to SM30 to maintain the records for that table, I am not seeing any fields there. When I click on NEW ENTRIES tab, I am getting a message: No Entries are available. I don't see any field there.
Can anybody please advise what went wrong?
Thanks much.

Hello Sam,
I guess the amount fields and date fields will not be visible in the first screen of the table maintenance generator when it is defined with two screens. Try giving that as a single screen, and then you would be able to see the fields.
However, in change mode when you select new entries tab, it should display the fields for maintenance. Please re-check the table maintenance generation.
Regards,
Pavan

Table Maintenance Generator : Editable Entry after validation fails

Hi,
I have created a Z table and a table maintenance generator to maintain the data.
I have to carry out certain validations when user enters data on Key and Non- key fields.
This is working fine, but the issue is with the key fields.
If validation fails, the table maintenance screen is displayed the date-field is grayed out (non-editable) as it is the key field of the table.
Now the user cannot change the data unlike the non-key fields were the user can modify the non-valid data and save again.
How can make the date field (Key Field) editable after entry in case the validation fail, so that the user can make the changes.
Please suggest the approach to handle the above scenario in events.
Thanks,
Keyur

Thanks Kiran for your inputs.
I have done the same thing what you have explained.
I have used a Form Routine as CIP_SAVE with Event Number as 01, since on event SAVE i need to validate whether dates are
overlapping the inputs dates or not.
Fields are :
Group ID (Key)
Start Date (Key)
End Date (Key)
Value (Non -Key)
Initial value in Table:
Group ID = 12345
Start Date = 01/01/2011
End Date = 01/31/2011
Value = 11.11
Now if i try to enter value:
Group ID = 12345
Start Date = 01/02/2011
End Date = 01/25/2011
Value = 99.99
& SAVE it... validation will fails because Start & End dates overlaps.
Hence, on Table Maintainance Screen all key fields will be in non-editable display mode, whereas non-key field will be in editable mode.
My requirement is that Start Date & End Date key fields must be Editable field.
Thanks.

'Position' Button in Table Maintenance Generator

Hi,
i am using 'Position' button to navigate to particular entry in the table in table maintenance generator.
as far as i know this will correctly when we provide 'left part' of key in the pop up provided by position button.
however in my case where i changed the column positions in the table maintenance generator which includes key fields.
does it going to affect 'Position' functionality? because position button is not taking me to correct positions now.
please suggest....

Did you change the key field order in the table structure in SE11 or did you manipulate the table maintenance screens by changing the key column order?
In either case, you can regenerate table maintenance by clicking the change button in SE55 and selecting all check boxes. This will correct the issue. However, check if you have any custom events written or modified screens, as those changes will have to be restored after regeneration

Modify Key Field Values of a table through Table Maintenance Generator

Hi All,
   I have created a z table with below structure. In this fields upto Valid To are all key fields. This is to ensure that consistant valid record get stored in the table.
MANDT     MANDT     CLNT     3     0     Client
VKORG     VKORG     CHAR     4     0     Sales Organization
VTWEG     VTWEG     CHAR     2     0     Distribution Channel
SPART     SPART     CHAR     2     0     Division
SKU     MATNR     CHAR     18     0     Material Number
LZONE     LZONE     CHAR     10     0     Transportation zone to or from which the goods are delivered
VALID_FROM     ZVALID_FROM     DATS     8     0     Valid From
VALID_TO     ZVALID_TO     DATS     8     0     Valid To
PLANT     WERKS_D     CHAR     4     0     Plant
SNP_TZONE     ZSNP_TZONE     CHAR     20     0     APO Transportation Zone
ERDAT     ERDAT     DATS     8     0     Date on Which Record Was Created
ERNAM     ERNAM     CHAR     12     0     Name of Person who Created the Object
AEDAT     AEDAT     DATS     8     0     Changed On
AENAME     AENAME     CHAR     12     0     Last changed by
I have created a Table Maintance program through the Table Maintenance Generator. And for that I have assigned a t code.
I can able to create new entires but i can not able to modify Valid_from and Valid_to entries of existing records.
Initially those two fields were in display mode but i went to its module pool program and made then as input enabled. But what the vales I was entering, its not getting saved in database. When we change the values of those fields and save it, the system is saying No Data Change.
Any inputs how to solve this issue. I can not make VALID_FROM and VALID_TO fields as non key.
Regards,

Hi,
As you have already said that the value for valid to is a part of the key so you should not have any issues when this value is changed and the value is saved using the table maintainence generator, but in case you want to save values where the value for valid from has changed but the key is same we would not be able to save as there is already a value for the key, so if you want to save these values there are two ways 1 would either to delete the existing value value and create the new value or to have one more field as the key field like a counter so when the value is saved with a key the value is saved with counter as 1 and then ever next time for the new values increase the value of the counter.
In order to save these values use event 5 and put you code there.
You can also carry out checks for new aithorization in that event also.
Regards,
Himanshu

Table maintenance Generator + Tcode for SM30

Hi,
I have created a table maintenance generator for a Z table. Then I created a transaction from SE93 for SM30 and passing table name as parameter.
My requirement is that the user should only be able to delete records from the Z table. It should not allow to insert or modify records.
When I execute the transaction created above it is allowing to insert, modify and delete records from Z table.
How to solve this issue? Please help.
Thanks in advance....
Regards,
Sriram

Hi Sriram,
I don't know why your language has changed to German. When I change status ZULG, the language remains English.
To see what happens I have created new maintenance screens and I went into the Modification --> User Interface.
On the next screen I pressed Copy User Interface and after that I got a warning about diferent languages. I just pressed enter. Now the popup screen gives me the possibility to change the interface. I went straight into change mode, without switching to individual interface. I changed status ZULG (everything is in German), activated the status and returned to SE55.
When I start SM30 , all texts are in German.
Because this is not what you and I want, I started again, I deleted my table maintance and created it again. Went into the modification of user interface again and again copied the user interface. Now I went into change mode and I looked at my user interface (in display mode) and all texts are in German. Went back to the strat screen of the menu painter, ACTIVATED THE USER INTERFACE and now, when I change the status ZULG, all texts are in English.
So, all you need to do is activate the user interface before you change it.
When you have a 2-screen table maintenance (an overview and a detail screen), you might want to change status ZUDG as well.
Kind regards, I hope you succeed this time around.
Tom.

Table maintenance generator : EVENTS : please help me

I need to use table maintenance generator to maintain a custom table through a custom transaction.
I am using event BEFORE SAVE (01). It is working fine but small issues.
1)After entering new entries for some fields(KEY FIELDS), when I press save button, remaining fields values to be populated. Seletion statements have written in FORM of the EVENT 01 (BEFORE SAVE).
But the values for remaining fieldsare not populating immediately and but populating when I press BACK (F3). My requirement is with out presssing BACK or F3 , fields to be populated.
(note: SAP internal code..values are coming into TOTAL structure..then I manipulated this internal table)
PLEASE GUIDE ME, WHICH EVENT TO BE USED. importantly, which internal table/structure (like TOTAL we used for this requirement ) to be used for the proposed new EVENT? (Because lot of R&D to be done to find SAP structure)
2) second requirement is: even after entering new entries, if we press ENTER, then also it should behave like SAVE like in the previous requirement. Please help me to find the EVENT and Internal SAP generated structure (like TOTAL we used for this requirement ).

Hi Glen Anthony,
Thanks for replay,
I used foreign key relationship between those 2 internal tables....
I used event 05: When creating a new entry. I want to know the custom logic by which my 2nd Internal table gets automatically updated when i update my 1st Internal table
Thanks Glen.

Table maintenance generator in webdypro abap

Hi Experts,
Please can you suggest how to implemnt Table maintenance generator in webdypro abap.
Regards,
BBC

Hi,
Thanks for your inputs,
Now I have included add, modify, delete and save functionalities to ALV table.
Here What I did, fist it shows the list of records from data base table with ALV table as ready only mode.
Then
If we click on add button then last row will add with editable mode,
If we select a row and click on modify button then in that row fourth field only editable (because first three are primary key fields).
If we select row and click on delete then record deleted and updated in database table.
If click on save button, it captures the modified ones then saved.
if we test individual functionality, it is working fine.
If we do fist add functionality then after saving if we click on modify row then it is showing total row as in editable mode.
Here as per modify fyctionlaity in that row fourth field only have to show editable.
Please can you suggest how to resolve this issue?
Regards,
BBC
Edited by: BBC Achari on Sep 7, 2011 9:23 AM

New field not reflecting in Table maintenance generator

Hi Experts,
I have added a new field in a ztable.I regenerated the table maintenance generator,so that the new field is reflecting in devlopment system , also a TR got created.When i moved this TR to pre-production system new fields are reflecting in the structure of table but not in table maintenance generator.
Please suggest solutions.
Regards,
Niranjan

Hi Experts ,
I have gone through the steps which is mentioned.But still issue is pending,the changes in TR are not reflecting in pre prod.
Error after moving the TR with "Definition of a Maintenance and Transport Object".
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLZFGL " in include "LZFGL$03
" in
line 13:
"Field "ZCHAR_FIXED_WIDTH" is unknown. It is neither in one of the spec"
"ified tables nor defined by a "DATA" statement. ."

EVENTS in table maintenance Generator

Hi, can u people help me while using EVENTS in Table Maintenance Generator. Means how can I perform different task using events.

Hi,
Using events in table maintenace generator, you can validate the fields, update the fields etc..There are events(01-New Entry), (02-Before Save); (03-After Save) etc... The respective events trigger on the action performed.
To create events : Goto table maintenace generator screen->Enviorement->Modifications->Events.
Select the from the list of events and peform based on ur requirement
Regards
Shiva

Events in table maintenance generator 01

Hi all,
       I have an urgent requirement regarding the events in table maintenance generator.The requirement is i have a qty field in table i want to change the existing value it should allow only a lesser value.How to use TOTAL and EXTRACT structures.
it is urgent.please help me out.
Thanks & regards,
Kranthi

Follow the example below:
form get_vendor_name.
data w_extract type z_table.
data begin of w_total.
          include structure z_table.
data: action,
        mark,
end of w_total.
loop at extract into w_extract.
    check not w_extract-z_vend_no is initial.
    select single name1 from lfa1
                       into w_extract-z_vend_name
                       where lifnr = w_extract-z_vend_no.
    modify extract from w_extract.
endloop.
loop at total into w_total.
    check not w_total-z_vend_no is initial.
    select single name1 from lfa1
                       into w_total-z_vend_name
                       where lifnr eq w_total-z_vend_no.
    modify total from w_total.
endloop.
endform.
Reward points if useful.
Regards.

How to create table maintenance generator?

Dear Sir/Madam,
when i am creating table maintenance generator , it asks for function group
i give 0MB8 , it says u r going to change function group which does not belongs to u,
then i created a function group yfg9 and given , it then says yfg9 cannot be processed.
please telll me how to create the table maintenance generator for maintenance view yv_mmim_rep_cust.
Thanks in advance,
Dastagiri

Hi ,
Table Maintenance generator is used to maintain data in table , instead of giving access to se11 , we create a tcode for this table maintenance generator and we will give this tcode to end-user to maintain data
To generate table Maintenance generator :
click on UTILITIES in menu bar
-> table maintenance generator
-> enter Authorization Group as : &NC&
-> Enter Function Group : name of your table ( so it will create a function group , to check this function group go to tcode se80 : then select function and enter your Table name )
-> Then click on find screen numbers in Application tool bar.
-> Then click on create button in Application tool bar
if it is created successfully , then you will get a status message like table maintained generator is created successfully.

Purpose of table maintenance generator

wht is the purpose of table maintenance generator

Hi Pavan,
The purpose of table maintainence generator is to enable the table maintenance through SM30, and to implement and validation etc on table field inputs.
SE11->Utillities->table maintainence generator
You need to enter the values of following fields:
1. Table name
2. Authorization group , and authorization object (select the suitable one )
3. Function group and package
4. Maintainence type : single or double screen maintainence view depending on the option selected.
5. Maintain screen number : you may specify a value or let the system generate one for you.
The validation code for the table entry is written in the flow logic of this screen. Even some of the fields may be made display only , by adding suitable code in the logic or directly disabling the input in table control in the layout.
Table maintanance is for creating,adding datas to an existing table.
it is for adding muiltiple records at a time in the table
A table can be manipulated by a program or manually.
When creating table, you will find a check box 'Table maintenance allowed'. If we
check that option, we can manually enter entries using SE16 or table
maintenance generator screen.
SE16 is for data browser.
Go to SE11, give the table name and click on change. Then Go to utilities--> Table
maintenance generator.
In the table maintenance generator screen, we should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually we will create with one
step. we should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table
entries by choosing Maintain.
In the production system, end-users will not be having access to transaction
codes like SE11 and SE16. Developers will not be having access to many
transaction codes including the above two.
To view the contents of the database table, we will use SE16n in Production
system. Please find out the difference between SE16 and SE16n.
All these authorizations will be maintained by BASIS team, by creating access
profiles.
So in order to edit or create the contents of a database table, we should go for
table maintenance generator. In real time, authorizations will be maintained in
production system. (even in development and Test systems to some extent).
There is an audit like Sarbanes-Oxley Act for American clients, where every thing
will be audited by government agency. To know more about SOX, use the links on
the right hand side of this page.
The second reason is, we can edit or create multiple entries at a time, using table
maintenance generator.
Apart from that we have options like 'Enter conditions' in table maintenance
screen SM30. Please try to find out the use of those, by creating an example.
Table Maintenance generator: Difference between one step and two steps.
While creating table maintenance generator, we find below options:
When we choose one step, we have to give the screen number in Overview Screen field.
When we choose two step, we have to give both overview screen number and single screen number.
You can give any number for screen. Dont give 1000 screen number. As this
number is reserved for selection screen.
When we choose two step, two screens will be created for table maintenance. For
single step only one screen will be created.
When we choose two step, table maintenance will work as follows
Go to SM30, give the table name for which you have created table maintenance-
Overview screen will be displayed. To create entries, when you click on new
entries. Another screen will be displayed, where you give input and save. You can
enter one record at a time.
Go to SM30; give table name for which you have created table maintenance-
Overview screen will be displayed; To create entries click on new entries, you can
enter the records on the same screen. You can enter multiple records at a time.
We use single step generally, as it is user friendly.
To completely understand the difference and above points please do exercise by
creating table maintenance generator in both ways (using single step and two
step).
Link: [http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm]
Link: [http://help.sap.com/saphelp_46c/helpdata/en/a7/5133ac407a11d1893b0000e8323c4f/frameset.htm]
Link: [/message/2831202#2831202 [original link is broken];
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.

Error while creating table maintenance generator

Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
Sravanthi

Hi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed.

Addition of a new column in Table Maintenance Generator

Hi All,
I have a requirement in which I have to include a new field in Table Maintenance Generator . This field is not present in the table but its data will be fetched from another table . Pls help me in this regard.
I have little idea of Table control .
Regards,
Nibha

Hi Nibha,
Table maintenance generator screen is an automatically generated screen. You cannot to any changes in that and neither can you do the changes in the PBO and/or PAI.
You can do it but it will ask you for SAP key etc. So there's not need to do it that way.
What you could do is;
1. Go to the table maintenence generator from SE11, in Change Mode.
2. Click on change icon. The system will show the 'Change Generation Elements' screen where it sill ask you the resson
    for change.
3. Click on the New Field/Sec. table in struction (or whichever is appropriate/applicable in your case)
4. Press Ok (Tick sign).
5. Then it will show you the ''Change Generation Elements: Detail' screen.Here;
       => You will select the maintenance screen that you wish to change( Overview/Single).
       =>   And the Field Type. Whether it is a key field or normal field.
              Select which ever is applicable.
6. The system will then re-generate the screen for you and - You'll Smile! - that you got the answer!
Cheers!
Sanjiv

Issue in table maintenance generator

Similar Messages

Maybe you are looking for