Issue in the GR of Import PO

Dear Experts,
A Import PO was created at a net price of 122.07USD per 1000ea. PO qty is 1,00,000EA
1)When accounting GIR First time the basic amount shown
correctly.For ref find below given details
GIR Number:5003420576
Net price defined in PO is 1000 EA=122.07 USD
GIR Qty is 25000EA if u calculate it will come 25*122.07=3,051.75 USD
this is correct
2) After accounting GIR second time for the same PO(HK10050) the basic
amount is showing wrongly.Pls find below given details
GIR Number:5003657874
Net price defined in PO is 1000 EA=122.07 USD
GIR Qty is 75000EA if u calculate it has to come 75*122.07=9155.25 USD
but in system it is showing 2,266.76 USD.There is difference of 6,888.49
USD.
Kindly let me know the soln ASAP.
Regards,
Dharshan

Hi,
In one table conversion factor from one currency to another currency based on the period is being maintained.
The variance could be due the above. Check the currency conversion
Muralidhar

Similar Messages

How do you stop adjustments to the image when importing pictures?

When I import pictures into Lightroom 1.1 they all automatically get adjusted to be much brighter. How do I stop this? The DEVELOP SETTINGS DIALOG in the IMPORT PHOTOS pop up box is set to NONE. I don't think it's a color management issue as the images are imported with a normal brightness/color balance and then get their settings changed one by one. Opening an image in Photoshop CS3 with the EDIT A COPY WITH LIGHTROOM ADJUSTMENTS radio selected opens up the modified brightened image. Opening that same image in Photoshop CS3 with the EDIT ORIGINAL radio selected opens a normal image with correct brightness/color balance.
This is driving me mad! I don't want these adjustments. Please help!

It's not turned on by default, that I know of. Somehow, yours got that way.
As to where it's located, I would like the preferences to be distributed around the application rather than concentrated in one place. I agree with you that this one should be in the import dialog.

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Anyone experienced an issue with 'insufficient privileges' notification in the current iTunes when trying to download from the store or import a CD?

Since changing iTunes to the current version, I've experienced an issue when trying to either download from the store or import a CD.
I keep getting a pop-up message that says I have insufficient privileges to perform the action.
A bit weird as I'm the admin for the iMac.
Anyone else seen this and know a fix?
Thanks.

I've also come to the conclusion that this is a router problem, as I don't have this issue at all when I'm at work.
It's a old router, and we've had problems with other devices not wanting to connect to it in the past.
I'm sure theres some way to solve this issue, but I think, rather then sittin gon hold, to figure this issue out, and my router having issues prior to this, I'm just going to pick up a new router at this point.
I hope any of this has helped someone get their issue, at least temporarily solved.

I am using Indesign cs5 version 7.0.4 with a mac OS X version 10.9.4. I am having an issue where the save and save as option disappears. I am exporting the file as .idml and then resaving to avoid losing work but has to import all the images which takes a

I am using Indesign cs5 version 7.0.4 with a mac OS X version 10.9.4. I am having an issue where the save and save as option disappears. I am exporting the file as .idml and then resaving to avoid losing work but has to import all the images which takes ages. Any help out there?

I believe there are a couple of similar threads about CC or CC2014 behaving this way that might give yo some hints, but CS5 is not supported on your OS and may not run properly regardless of what you do. An in-place OS upgrade or an attempt to migrate the application would both be major problems for ID, so if you did either of those things you'll want to uninstall, run the cleaner tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3) and reinstall.

Facing an Issue with Payables Open Interface Import

Hi
I am facing an issue with the Payables Open Interface Import...
My Requirement is:
1. Need to upload the PO, Supplier, Invoice #, Invoice Date details to custom table (through web ADi)
2. From custom table storing in the AP invoice interface tables.
3. From Interface table, calling API (Payables Open Interface Import) which wil create the invoive (PO matched)
Now, If user has given wrong data some reasons....Payables Open Interface Import has rejected that entry....user has checked this and corrected later and trying to create the same invoice with the correcte data....As there is a rejected a line exists on the Header interface, line interface...even though if he pass the correct data in the second time it is cosidering that rejected row and not processing the correct row...
Can any one suggest on this...
Regards,
Bala

When processing a record, you can check if another ap_invoice_interface record exists for the same invoice number and
1) Delete the old record and then insert a new one
OR
2) Update the old record instead of creating a new one
Hope this helps,
Sandeep Gandhi

Excise Tab is not appear in the MIGO display --- Import Process

Hi Experts ,
Excise tab is not appear in the display of the material document in Import process.
Process flow.
1. Import Po.
2. Customs clearing (MIRO)
3. Capture excise invoice against the Import Po.(Reference to MIRO document )
4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
after posting the material document , excise tab is not appearing against the material document .
5. post excise against the excise invoice .
Please help.
Thanks
SAP MM
Edited by: Subbas on Aug 16, 2010 11:58 AM

Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
5. Incoming Excise Invoice capture at Blocked stock 103 is not
supported in CIN.
The capture of incoming excise invoice is strictly advised to carryout at
unrestricted stock and not at blocked stock(103/105) due to architectural
issues. The capture at blocked stock may cause wrong excise posting.

I have the answer to Importing VCards into Address book

Ok after reading all the forums etc and banging my head against the wall for a couple of hour I have found a two stage solution to Importing VCards from Outlook into Address book.
As I have 978 contacts in about 14 categories I had to find an efficient solution, firstly I downloaded a small program called "Outpod": Backup iPod to PC,copy songs from iPod to computer,iPod to iTunes whilst it is old and talks about iPod it works perfectly on my Outlook 2010 version.
It doesn't actually "install", just run the .exe file from anywhere after you extract it. In Outpod select "Contacts" if you have multiple profiles it will then prompt for which profile to use, expand your Contacts list, and then select "categories" on the top bar.
All contacts are now displayed in their correct category, select all of the contacts in the first category, right click, and select you want to export from a Category using Outpod, insert a thumbdrive on the PC, right click and select "Save selected items in one file", Outpod will ask you where you wish to save the file and gives you the opportunity to name the file. Just name the file the same name as the category you are exporting to, and repeat for all categories until you have them all on the USB stick.
Now to the Mac. Open Address Book on the Mac, create Groups (not "Smart Groups") to match all your categories. Now insert the thumb drive into the Mac, open it in the Finder until you can see all your files. with both windows open, highlight the Group in Address Book and then double click the corresponding file in the finder window. Shazam! all those contacts will appear in the correct group. repeat for all other Groups.
I find it astonishing that Apple just ignore issues like this, and "Last Import" not clearing it's cache for instance. So now I just have to figure out how to get a movie to auto play on a Keynote slide, another great product dissapointment, anyone?
Cheers
Tex260Z

Thank you thank you. UTF 16 did the trick. What I was trying to do was import/save addresses i found on whitepages.com directly to my address book. I can't seem to find an ideal way tht doesn't involve a few steps of cutting and pasting. anyone?

TS2972 I just updated all of our computers to itunes 11 and now when we try to use our home sharing, we can't import songs. What happened to the easily located "import song" feature? I wish now that I wouldn't have updated to the new itunes 11.

I recently updated all of the computers in the house to itunes 11. Now when we try to import songs from homesharing, we are unable to. What happened to the conveniently located "import song" button on the old version of itunes. Please help an old mother out please!

diesel vdub, i use 11.1.1
solved the issue today. first sync with itunes, so all the stiff you bought on the mobile will be backuped.
1. uncheck sync music in itunes and sync. all the music will be erased from mobile device
2. check music player on the mobile device. just the unwanted songs will still be there
3. go on the iphone to settings, general, usage, music player. there is just a few mb from the remaining unwanted songs. swipeleft and erase the content. switch iphone off and on again
4. repeat step 2. there will be no data. otherwise repeat step 3
5. check sync music in itunes and sync. all the music will be back again but not the unwanted songs.

"Photos in the Camera Roll of "(your) iPhone" cannot be imported because the device is locked with a passcode. You must unlock the device to import them." My iPhone 5 running the latest iOS 7.1 and I'm using iPhoto '11 v 9.4.3

"Photos in the Camera Roll of "(your) iPhone" cannot be imported because the device is locked with a passcode. You must unlock the device to import them." That's the new error message when I plug in my iPhone 5 running the latest iOS 7.1 into the MacBook Pro running iPhoto '11 v.9.4.3. My Mac OSX is still 10.8.5.
So, I unlock the iPhone by entering the "passcode" before I plug it into the MBP and still iPhoto does nothing. At least it doesn't issue the error message above.
I've checked both iPhoto preferences and those for Photos and Camera in the Settings on the iPhone. There doesn't seem to be anything to change this lack of connectivity.
What next please?

An hour-long phone discussion with Apple Support yesterday solved this question and sorted a couple of others.
As for this one, do not ignore any messages which pop up when you plug in your iPhone and ask "Trust this computer?". The correct reply is "Yes", not "Cancel".
OK, you cancelled like I did, thinking "What on earth is this for?". Mistake. You can force the issue by having iTunes open when you next plug in your iPhone. Tell the iPhone that it can trust its old friend, your computer and voila! Your photos can download into iPhoto again.
Thank you, Jay with Apple Sydney, Australia!

Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?

Wifi keeps scanning and dropping even after connected to home network. Never had this issue until the update, and now my phone runs slow and terrible. Horrible update!! Any ideas on a fix?

It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
AndreaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

My WD hard drive won't "mount" it shows in disk utility but can't be repaired. I'm thinking this is a software issue since the disk is being recognized.

I
I have a WD drive that won't "mount". Tried repairing, turning off and back on, unplugging and nothing has worked. Can anyone help?

The WD Passport has no independent power supply, relying instead on getting power from a USB port on the computer. AS the drive ages it can need more power to spin the platter and many USB ports on notebook cannot provid that much.
Anther issue is the WD drive itself. WD uses an odd proproprietary formatting scheme that makes the drive not always behave like typical Mac drives.
If the drive contains nothing you need to access, use Disk Utility to reformat it to "Macintosh Extended (Journalled)"
If the drive contains important data, there are a couple of inexpensive ways to get more power to it:
1) Get a "Y" conenctor cable like this:
http://eshop.macsales.com/item/OWC/USB2AYMBPB/
It draws power from two USB ports and ofter that is enough to make the drive work.
2) Get a powered USB Hub:
http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
It has its own power brick and that is usually enough to get an older USB external drive recognized.

Some issue with the Function Module u0093'SKWF_FIND_BY_QUERY' in a BW ECC6.0

Hi All,
Need some urgent help..
Iam facing some issue with the Function Module 'SKWF_FIND_BY_QUERY' in a BW ECC6.0 system.
As shown below, in the function module, the Table IT_PROPERTIES_RESULT gets populated with some values based on inputs like IT_CLASSES, IT_QUERY, and L.
This updation of IT_PROPERTIES_RESULT table is happening for some of the services sent through IT_QUERY and is not getting populated for some.
call function 'SKWF_FIND_BY_QUERY
exporting
CONNECTION_SPACE         =
    OBJ_TYPE                 = 'L'
PTYPE                    =
X_STRICT                 =
IMPORTING
ERROR                    =
     tables
     CLASSES                  = IT_CLASSES
     QUERIES                  = IT_QUERY
     RESULT_OBJECTS           = IT_LOIO
PROPERTIES_REQUEST       = PROPERTIES_RESULT        = IT_PROPERTIES_RESULT.
The values are as follows:-
Values getting populated in IT_CLASSES BW_LO_TRAN               Values getting populated in IT_QUERY 1) BW_QUERY, 2) /BIC/ZSERVICE
I would like to know whether any Standard Customizing BW transaction is present that is maintaining IT_PROPERTIES_RESULT table properties and fetching through this Function Module.
Also, suggest how this issue can be resolved
Thanks & Regards,
Shailesh nagar

Thanks Suhas. That definitely helped.
Also the following links helped.
http://help.sap.com/saphelp_nw70/helpdata/EN/86/1c8c3e94243446e10000000a114084/frameset.htm
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Cheers,
Preethi

Truncate / Trim and Convert the values while importing in Import Manager

Hi,
I am facing the following issues while importing the values in Import Manager.
1) The incoming value is a 4 character text value (e.g. D004) and i need to truncate the 1st two characters so that i get the output as "04" and map it to the destination numeric 2 character field.
Can any1 help me on this as to how can i truncate the 1st two characters?
2) My incoming value is a numeric field which is coming from ECC. this value can be negative as well. the ECC sends this value as (78.00-) ie the minus sign is suffixed to the value but in MDM i need it as (-78.00) ie minus sign prefixed to the value.
Is there any setting in Import manager where i can set the minus sign as a prefix?
Useful answers will be rewarded with points.
Regards,
Roshani

Hi Roshani,
Can any1 help me on this as to how can i truncate the 1st two characters?
As suggested by everyone, none of these options will work. Since your field has alphanumeric Value i.e. D004. Use Option Replace.
After mapping your source field with target field which must be of Type TEXT, Right click on your source field>Set Value Conversion filter>Replace..-->a pop up window will come Replace write Find What: D0 and Replace with: keep it blank(dont write anything) and then Press Ok, you will see all your Source values D0XX converted to XX and then can save in Import Map which will give you the desired result.
If you set your target field of type INTEGER, you cant have option Replace. And the TRUNCATE option as suggested by everyone will not work as Operand 2: you can set as Numeric values only, you would not able to write D.
Is there any setting in Import manager where i can set the minus sign as a prefix?
I dont think this is possible alone with Import Manager, you need MDM workflow for this where your workflow trigger action = Record Import in Data Manager, and need to select the same workflow in configuration options of Import Manager>Import>checkout/workflow = select the workflow name from drop-down which you set in Data Manager and then need to save this in your Import Map. So in this manner whenever record comes through import Manager, these records automatically will go through this Workflow and will give you the desired result.
START(CHECKOUT)>Assign>STOP(CHECKIN)
Assign step where you give assignment on this field and write assignment expression as:
IF(FIND(XXX, "-"), "-"&LEFT(XXX, (LEN(XXX)-1)), XXX)
where XXX = Field name which you defined in MDM repository.
Regards,
Mandeep Saini

Issue in the GR of Import PO

Similar Messages

Maybe you are looking for