Issue in the XI Integration Directory when generating communication channel
Hello,
In the SAP XI Integration Directory, when I am attempting to create a Business System. I would like to have the communication channels automatically generated. The Business System gets created as intended. However the communication channels are not automatically generated. I get the message captured "<b>Unable to find an associated SLD element (source element: SAP_XIIntegrationDirectory, [CreationClassName, SAP_XIIntegrationDirectory, string, Name, directory.cxg.cpgia64, string], target element type: SAP_XIIntegrationServer)"</b>
All configurations seems to be OK. Have you experienced this problem before, If so how did you remedy to it?
Thanks in Advance,
JLC
Dear Cancel,
we have this error too. What i can say is, that it have to
do with the inconsistence of the SLD. You have to check if
you don't have some inconsistence in the SLD.
Sometime the connection to SLD is instable. Then just try
again some minutes later. But it the error persist than
something is not correct configured in SLD. We don't know
exactly what we have done so that the error gone after
correcting in SLD.
best regard,
Ly-Na Phu
Similar Messages
-
No sender agreement configured in the XI Integration Directory
Hi,
I am using MPA(MML) message format in XI scenario. My scenarios are R3->XI->Marketplace and Marketplace->XI->R3. The first scenario works fine with no problems where as when i try to post MML message from marketplace to XI system, i am seeing the "No sender agreement configured in the XI Integration Directory for the given message header:SenderParty=xxxx; ReceiverParty=; SenderService=xxxxx; ReceiverSerivce=xxx; Interface=xxxx; InterfaceNamespace=xxx;". I have created sender agreement for this secenario, and moreover i haven't this sender agreement in the xi cache. Please let me know if i am missing anything in the configuration.
Thanks & Regards
SrujThanks a lot for replies, but i have tried all these options but no luck. Does it need any additional configurtion to resolve this issue, i dont think this is cache issue, if that is the case after all steps which i have done should have fixed it. Please post your comments.
Once again thanks a lot for everyone.
Thanks & Regards,
Sruj
Message was edited by: Srujan Gogineni -
How to get the full image directory when i upload the image to web page???
hai, how to get the full image directory when i upload the image to web page???
here is the example:
<form action="uploadfile.jsp" method="post">
image<input type="file" name="image" />
<input type="submit" value="submit"/>
<%
String s=request.getParameter("image");
%>
<%=s%>
</form>
i upload the image from C:\image\center.gif. i use request.getParameter just can get the image name like "center.gif". Can anybody help me how to get the full path name. Thanks a lot..There is no need to get the path. It is also fairly pointless as the server cannot access the client's local file system.
Carefully read this article how you can upload files the right way: http://balusc.blogspot.com/2007/11/multipartfilter.html -
I had recently purchased a iphone 5s with OS version 7.1.2 in Oman and had to move to India.I am facing some hardware issues with the earphone slot. When i plug in the earphone there is lot of disturbance heard. Can i get it repaired in India under international warranty?
No. The iPhone warranty is not international. You will need to have warranty service done in Oman.
-
Issue where the cart is empty when user logs back in
Having issue where the cart is empty when user logs back in
Steps:
1. User logs into the site
2. User selects items and the cart is updated
3. User logs out of their account
4. User exits/closes the browsers
5. User then reopens the browser, navigates to the site, logs in and the cart is empty
My understanding is that the cart should be populated with the previous items since the user did not complete the order.
I have the following settings:
in shoppingcart.properties
persistOrdersForAnonymousUsers=true
persistOrders=true
in cookieManager.properties
sendProfileCookies=true
in /atg/userprofiling/ProfileRequestServlet.properties
verifyBasicAuthentication=true
in /atg/dynamo/servlet/dafpipeline/ProfileRequestServlet.properties
persistAfterLogout=true
persistentAnonymousProfiles=true
Anything else that needs to be set?
Edited by: boyd4715 on Feb 6, 2013 11:07 AMI reset the properties back to their orignal state
in shoppingcart.properties
persistOrdersForAnonymousUsers=false
persistOrders=true
in cookieManager.properties
sendProfileCookies=true
in /atg/userprofiling/ProfileRequestServlet.properties
verifyBasicAuthentication=false
in /atg/dynamo/servlet/dafpipeline/ProfileRequestServlet.properties
persistAfterLogout=false
persistentAnonymousProfiles=false
in /atg/userprofiling/ProfileTools.properties
mergeOrder=false;
Observateion:
If an anonymous user comes to the site, adds items to the cart, leaves the site and comes back - the cart is empty - the order repository is not updated
If a user logs into the site, adds items to the cart and then exits the browser (does not log out), comes back to the site, the selected items are in the cart
If a usr logs into the site, adds items to the cart, logs out of the site, exits the browser, comes back to the site, the selected items are not in the cart
An order does not get presisted to the repository until the order is confirmed.
Based on the last item that explains why the user is not seeing any anything in their cart when they log out. If they do not log out, I assume then that the content of their cart is stored in the cookie.
So, now the question is - why is this happening - I am not the original author of the site - just trying to get some things fixed on it. -
Alert when Sender Communication channel is inactive/down
Hi,
Kindly let me know if we can generate an alert using alert configurations/rules when Sender Communication channel is inactive/down.
Thanks.
Regards,
Aditya.May be in the channel monitoring the channel is stopped. If you are sure that the channel is active in ID and in Start mode in communication channel, then it is a cache issue. Then, perform full CPACache refresh.
Regards,
Prateek -
What is the use of Module tab in Communication Channel ?
Hi Expertes
can any body tell me the that
What is the use of Module tab in Communication Channel ?
How we can use in the senarios?
Mainly What are the Situvation we can use this tab ?
Thank you
G,Praveen Kumarhi rajesh
Thank You For Fast Responce
Error :
Exception caught by adapter framework: The following configuration errors were detected: - Either dataRec.fieldSeparator or dataRec.fieldLengths must be specified.
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: The following configuration errors were detected: - Either dataRec.fieldSeparator or dataRec.fieldLengths must be specified : com.sap.aii.af.service.util.configuration.ConfigurationExceptionSet: The following configuration errors were detected: - Either dataRec.fieldSeparator or dataRec.fieldLengths must be specified.
Can you Help me torectifiy the error . -
Not able to see the Adapters@Integration Directory!!
Hi,
I have created Data types,Messages Types, Message Interface in Integration Repository.
I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
<b> Its not showing any Adapters in ADAPTER TYPE option and also
Transport Protocol and
Message Protocol are blank.</b>
What could be the reason??
Please guide me in order to complete my scenario.
Thanks in Advance.
LNMhi madduri,
check these links....
Not able to see the adapter types in ID
Adapter Engine not found in ID
<b>check the last post here.... u will get ur answer !!!</b>
Adapter Type not found
Do these steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
regards
BILL
**mark the thread answered when u got ur answer -
Issue with the sender file interfaces when using UTF-8 files
Hello experts,
We are having number of File to SAP interface scenarios in our business process. In the past, we are having the files coming to us in ASCII text format. Recently, because of the business process change(to handle multiple languages like Chinese), we are getting now the same files in UTF-8 format. So, we have changed the attribute File Type in the sender communication channel from Binary to Text and used encoding format as UTF-8.
Now, when we see the processed files in PI, we are missing the Header record in the message. For example, we have the PO interface in the following format:
Identifier Information
H PO header information
I PO Item information
I PO Item information
Once the file adapter picks this format kind of file and when we see the XML message in PI, it is just having only two Items information. The header part is not coming to PI at all and the message is trying to get processed inside SAP and therefore interface is failing.
Additional observations made:
u2022 We have checked the Document Offset field value too; it is initial for the interface.
u2022 We added an empty line in the UTF-8 text file, it worked fine. But, this is not an ideal solution for us, because the system which generates these files, canu2019t handle it.
Does any one has observed this kind of problem before? If so, can you please help me ...
Thanks,
Adithya KThanks for all the information. Currently i've tried to use both modules (TextCodepageConversionBean and XMLAnonymizerBean) in my Sender File Adapter, but for now without any result...
To describe the situation: i am using flatfiles which i am fetched from the file system (NFS) by the Sender File Adapter. To translate the characters to the XML strucutre, the File Content Conversion protocol is been used.
The content conversion defines the structure base on the first two characters on each row in the flat file. This worked fine till one of our suppliers is delivering BOM characters like "EF BB BF" in the beginning of the file.The content conversion is not able to recognize my header characters in this situation, which will normally start with "01".
Any suggestions? -
Message mapping hangs when selecting communication channel
Hi Experts,
I have a strange problem. In message mapping, there is an RFC Lookup. For this RFC lookup, there is one parameter of type communication channel. I want to test this message mapping. So, I go to the Test tab and browse for all available communication channels. When I select a channel and click on Select, ESR hangs. I am not getting why this is happening. Please help me get rid of this problem.
Thanks,
NetreyHi,
Got solution for this problem. Below is the communication from SAP on this issue,
Please apply the latest patch levels for the PI components, following
the steps below:
http://service.sap.com/swdc
1. Software Downloads - SAP Software Distribution Center
2. Support Packages and Patches - Entry by Application Group
3. SAP NetWeaver and complementary products - SAP NETWEAVER PI
4. SAP NETWEAVER PI 7.1 - Entry by Component
5. Process Integration. The components that should be updated are:
ESR 7.10
MESSAGING SYSTEM SERVICE 7.10
XI ADAPTER FRAMEWORK 7.10
XI ADAPTER FRAMEWORK CORE 7.10
XI TOOLS 7.10
Thanks and Regards,
Netrey -
This issue happens to me randomly at times. I'll be using Firefox when I try to minimize something, this causes any tabs or multiple pages of Firefox I have up to automatically freeze and won't even respond. They don't even turn a faint color and tell you (Not Responding). The only way I get it to do anything is by opening my task manager and have to forcefully shut down Firefox and then restart it. The problem is, when this happens, Firefox never tries to bring back the pages I had up, so anything I had up I have to personally go off and find again.
Try this:
Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse. ONce the computer starts up again, wait for the pop-up looking for a mouse. Turn on the power to the bluetooth mouse. It should work normally now. -
Do you have an issue with the touchscreen not working when cold?
I just got an iPhone 5 64GB White and noticed that when I ran with it outside today, in about 50 degree weather, the phone's touchscreen stopped responding. Basically I couldn't swipe to unlock. I also noticed when I put the phone on my kitchen granite countertop which is pretty cool, the phone does not recognize my touch on the screen. Was wondering if anyone else is having this issue.
I noticed a problem with the touchscreen at cooler temperatures as well - even at about 60 degrees, it stopped responding to touch in part or all of the screen. It took a while to figure out, but your post helped me - thank you.
I took the phone in to the Genius bar, was able to reproduce the problem (I'd let the phone sit near my car's air conditioner on the way there - heh), and they replaced it without argument. The new phone does not have the same problem.
This is the first Apple device I've had to replace for a defect, and I'm impressed. I hadn't purchased any of their Apple care or any insurance but it was free and took all of 15 minutes. -
Since connecting my new 5s my 4th gen shuffle is not recognised by itunes.
The device is not appearing in 'my computer' but is receiving power as it is charging.
I never had this issue with my 4s.
I have tried the troubleshooting with no success.
If anyone has any suggestions on what settings I need to change or what I need to do this would be greatly appreciated.
Thanks for your help.Try Resetting Your iPod while it's connected to the computer.
Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
This will often get it recognized. It may take several attempts.
Also see these (if you haven't found them already):
Your Windows PC doesn't recognize iPod
iPod does not appear in iTunes or on the desktop
iPod appears in Windows Explorer but does not appear in iTunes -
Configuring Integration Directory when BPM is involved
hi:
I have a bpm scenario which involes multiple transformation, sync send, async send steps.
I need to know a formula for keeping in mind when configuring ID when a BPM is involved. Its is straight forward way of doing it when there is no BPM. But i get confused when a BPM is involved. Pls provide your suggestions.
ThanksHi Aarthi,
<i>
>>>Is this applicable for both async SEND & sync SEND?</i>
Yes
<i>>>>For a sync send, we need to have sender agreement,Receiver agrrement, intf deter & receiver detremination . and for async send just receiver determination . am i right?</i>
No need for a sender agreement in case of Async and Sync both the cases.
check out this blog it has a send step to RFC and that dose'nt need any sender agreement
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Regards,
Prakash -
Transparency issue when generating PDF from InDesign Server
Hi there
Has anyone experienced any issues with transparency appearing solid white when generating a PDF from the InDesign server? There is no issue when exporting from the InDesign application, only when using the Server.
Any pointers / suggestions would be much appreciated
Thanks
DaveyDavey, please send me an InDesign Server document that I could use to reproduce this problem. My e-mail address is [email protected] Thank you. --DougR
Maybe you are looking for
-
SCCM 2012: Office 2013 click to run deploy?
Hi, We would like to run Office 2013 next to Office 2010. Therefore the click-to-run option (app-v is only possible for Office 2013 ProPlus) looks the way to go. I found a nice guide a Office 2013 Plus "Click to run" Deploy in SCCM: http://www.peters
-
How to print set of documents without showing print dialog box
I have created a smartform tht prints a Payment Advice. Its input includes range of Document numbers. I call the smartform function in loop for all those document numbers. Now my problem is tht everytime tht function is executed the print dialog open
-
I was looking at the Apple Stores newest Mac Book Pros (later 2013) and I noticed that all the newest Mac Book Pros have Retina. Is there an option to not get Retina with these newer ones? I want to save money on that and also I would liek to get les
-
How to Correctly Reflect Photostream Picture Orientations when Modified in iPhoto Libraries?
Photos imported to iPhoto that are later edited to adjust orientiation (perform rotations) are not correctly updated in iCloud Photostreams. This is exceedingly anoying if automatic uploading to Photostreams is being used because all pictures includ
-
How do I Place Two Or More Template Regions Side by Side?
How do I change the page size of a template or a template region so that I can place two templates side by side with the content in between? Maybe I need to know how to place two or more template regions side by side? Can you insert a template into a