Issue in transaction code creation for sap query report .
Hi Gurus,
I have a requirement to create transaction codes for sap query reports. I found two ways to create transaction code for sap query report
1) By Generating program for sap query report and creation of transaction code for that generated Program. in tcode.
2) By using parameter transaction options in start object of se93
What are the difference between creation of these two ways. Please specify the advantages and disadvantages of both methods.
Regards,
Suneel Kumar Uggina.
Hi Jogeswara Rao,
But I am getting problem while transporting form development system to the production system. After transporting to Production system I have used the code created in development system, but it is giving Error ' No Program Found for that Transaction Code. And I would like to know on what conditions should I have to use the First one and as well as a second one in sap query reports.
Thank You,
Suneel Kumar Uggina.
Similar Messages
-
Transaction code for SAP query reports
Hi All,
I am trying to create transaction code for sap query report but couldn't go further.
1) Created User group in SQ03
2) Created infoset in SQ03 and assigned that to the user group
3) Created query in SQ01 using the infoset.
I executed the report in SQ01 and it is working fine.
Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
Assign transaction code to SAP Query (created via SQ01)
But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
Thanks in advanceHI,
based on the thread you've already mentioned:
In SE93, Create a Paramter Transaction
-> Transaction = Start_report
-> In default values, give the below details:
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-EXTDREPORT = Name of the Query
D_SREPOVARI-REPORT = User Group
So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
best regards, Christian -
Transaction code creation for a report group
Hi all,
I created a transaction code ZF17 for a report group FI02 with the following parametrs.
Transaction: START_REPORT
checked the skip initial screen check box.
D_SREPOVARI-REPORTTYPE = RW
D_SREPOVARI-REPORT = FI02
When i tried to run the T-code ZF17, it gives me
a message : PROGRAM FI02 doesn't exist
Any ideas why this message comes up?
Thanks,
Sobhan.I would think that its looking for a program name in the D_SREPOVARI-REPORT field, FI02 is not a program name.
Regards,
Rich Heilman -
Transaction code creation date
Hi,
Can anybody please help me, in which table we can get the info about transaction code creation date?
Point will be rewarded.
Thank you.Hi,
Do you mean by the date on which a particular document is created. If it is so it would be available in the header data of that document. For example if you are looking for sales order creation date, then u will get it in VBAK. If you r looking for deli doc creation date then u can get it in LIKP and for billing in VBRK.
Hope I am answering to ur query.
Kind Regards
Chakradhar -
SAP QUERY report for vendor line items
Hi
I have created a SAP QUERY report for vendor line items with fields vendor no.,vendor name,amount,company code and period.But there is one line item i donot know from wher system is getting it picked with is not in that vedor account,when i compare with fbl1n.I checked the document number too...the same doc number is twice in my query report.One with correct amount and another with wrong one.How do i chk.Where did i go wrong in creating query.I used logical database KDF.
Please advise.i chked...how do we get the amount displayed in query...it just displays amount no debit credit symbol... i have selected BSEG-DMBTR field but no -/+ sign,how is it done in query,please suggest.
-
Using transaction code KEAI for CO-PA to FI validation
I wanted to see if anyone has experience using transaction code KEAI (Analysis of Value Flow FI-COPA). I know there is also transaction code KEAT for SD to CO-PA to FI validation. However for our needs KEAI seems a bit more user friendly. I have not really found any documenation on KEAI online or in SAP help. The program for this transaction code is RKE_RECONCILIATION_FI. Does anyone know the key difference between KEAI and KEAT. Any input you have would be appreciated.
KEAI is analyzes all value flows to CO-PA as against KEAT which deals with Transfer of Billing Documents.
The reconciliation covers all record types - A to I and Z (PA postings only)
You can restrict the report for components like - billing, CO objects, FI Docs
You can see the result by all documents, documents only with delta, documents only with delta to CO-PA
You can display summarized report if required and expand.
The output shows delta in detailed columns like - Account / Source Document / PA Value Field, FI Value, Document Value, PA Relevant Value, CO-PA Value, FI Doc. Delta, PA Doc Delta, Crcy.
The report is collapsible - company code > account > Document > Value Field -
How many ways we can create authorization for user groups in sap query reports
Hi Gurus, I am getting a problem when I am assigning users to user group in sap query report .The users other than created in user groups are also able to add &change the users .So please suggest me how to restrict users outside of the user group.
Please send me if u have any suggestions and useful threads.
Thank You,
Suneel Kumar.I don't think it can be done. According to the link below 'Users who have authorization for the authorization object S_QUERY with both the values Change and Maintain, can access all queries of all user groups without being explicitly entered in each user group.'
http://help.sap.com/saphelp_46c/helpdata/en/d2/cb3f89455611d189710000e8322d00/content.htm
Although I think you can add code to your infoset and maybe restrict according to authority group, i.e.:
Use AUTHORITY-CHECK to restrict access to the database based on user.
Press F1 on AUTHORITY-CHECK to find out how to use it in the code -
Transport request for SAP Query - SQ01, SQ02, SQ03
Hi Experts,
I have a doubt, Whether we can have request for SAP Query which have created from Transaction SQ01.If Yes then How to do that....?
Thanks in Advance,
Chetan JoshiHi,
Use the program RSAQR3TR
Thanks
Naren -
Transaction code to run SAP SEM BCS
I want to know that what is the transaction code to run SAP SEM BCS.. please reply to me if u know the transaction code for that.
thanks in advance..
regards.
Mohankumar.GHi,
UCWB - to run the workbench
UCMON - to run the monitor.
Best regards,
Eugene -
Obsolete / Out dated Transaction Codes list in SAP HR / HCM Module
Hi Experts,
Please let me know the Obsolete / Out dated Transaction Codes list in SAP HR / HCM Module.
Thanks in advance.
Samanvita.Hi
Thanks for your reply. I know the concept of Obsolete Positions.
what I want is the list of Transaction Codes which are out dated / Obsolete due to release of new versions by SAP.
Any Transaction Codes are out dated in SAP HR Module, or SAP came up with new Transaction Codes with (same + extra functionality), so that we can use the new Transaction Codes.
Example: SE16, SE16N
Please let me know those Transaction Codes.
Regards
Samanvita -
Require TCode used by user for sap query created through SQ01
Hi All,
I have number of SAP Query in production that currently are used by different-2 user & created through SQ01
My question is how to know the TCode that used by user for SAP Query.
Thanks In Advance
Regards
SanCharlie
You did not get the question.
I knew the TCode of the query which I had created using tcode SQ01. user is using this query to see the report
Like I created query named 'order_line_details'. This query is basically to see the order & other details. To use this by user one TCode'zncv_ord_item' has been created.
So in the system lots of query are available. So i want to know the Tcode for those query that are using by user.
Thanks in advance
San -
How to run the Transaction Code - BIC for Bank keys uploading
Hi
How to run the Transaction Code - BIC for Bank keys uploading.
please give me suggestion.
Thanks
InduGo to BIC transaction screen
Fill the selection screen parameters as below
1. Update Run (Test Run: Check Off: Real Run:Check On)
2. Set Deletion Flag (Check On)
3. Maximum no. of records: 999999
4. Detail List (Check On)
5. Display variant: 1SAP
6. Presentation server (Select Radio Button)
7. Application server (Deselcet Radio button)
8. File name and Path: Select relavant file which is to be upload
9. Bank country: If needed (Give respective country name)
10. Select execute button or F8
NOTE: Make sure that before executing run execute TEST RUN by deselecting Update Run check box
Hope this will meet your requirement
Thanks. -
Different transaction codes useful for Performance Monitoring
Hi Experts,
Please can you guide me on this question, as to what are the different transaction codes useful for Performance Monitoring i.e. workload statistics and database statistics? What kind of statistics do each of these codes provide?
Many thanks,
MithunHi Mithun
In performance issuses you need to look in terms of many ways that is..
Workload analsys
ST03N: Statistics Regards Locallly
ST03G: Statistics Regards Golbally
STAD: Individual Statistics Regards
STATTRAACE: Individual Statistics Regards Trace
ST07 : User Distribution
Buffers and Memory
ST02 : Buffers and Memory and swaps monitoring
ST10: Table Acess
OS Monitoring
OS04: Locally monitoring
OS07: Remotely monitoring
OS01: LAN check
DataBase Side
ST04: Performance overview
DB01: Exclusive locks
DB02: Tables/Indexes
BackgroundJobs monitor
SM37
other tcodes
ST22: Abap Dumps
SM12: Lock Entries
SM56: NumberRange Buffers
SU56: User Buffer
all above transactions are need to monitor for Performance.
Regards
Bandla -
Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
Thanks,
SreenivasHi Sreenivas,
I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore. Your Discussion will most likely get reported as non-specific and get removed. If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed. There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having. If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
Regards, Mike
SAP Customer Experience Group - CEG (and a Moderator) -
can u tell me how to create a transport request for sap query
i dont know the exact way to create the transport request but i have done by this way.
after creating the query come out and go to se38 by default it will show a program name like asbksll------- like this and now i have copied it to one z program and transport it.
it may solve your problem.
regards
shiba dutta
Maybe you are looking for
-
I'm seriously distressed because I don't want to have to delete my music and I don't want to have to pay a lot of additional money to sync with an outside program. Please help.
-
I can't empty my Trash.... Help!!!
I have had Mac's since 1985 and have NEVER seen this on. The empty trash command does nothing. Option empty does nothing. Secure Empty does nothing. Repair permissions does not fix it. Rebooting after the above does not help. I even got "trashit" but
-
PS8 Elements won't launch editor
On start up of the program where it gives you the option to organize or edit, edit usually launches the editor and I can work in it. It brings up the load bar but then just goes away and I'm still at the same start up. Nothing has changed on my compu
-
Report data download to excel file
Hi experts, My requirement is report data download to excel file and that file should be an attachment to send email to specified people. first i want to to download data to excel file and that file should be an attachment. Regards V.Venu
-
My ipad is disabled how to coneted
como conectar mi ipad