Issue in Transport Request of ChaRM

I have created a Transport Request made import'd to Q-Sys, Now i need to Make some changes I've set the status to IN-dev & made changes & saved ,also released the transport request, still no changes found, Plz suggest me a remedy?

hello Savithru,
the normal process to import in QSystem your change via charm is to run the action "test transport" when you are "in development" for normal change document (SDMJ). You need to release your task prior to this action.
This action will create a copy of your intial transport and will release it to the import buffer of your Q system. (the initial transport is NOT released). You can see the transport number in your log in your change document.
The actual import in Q needs to be scheduled manually or automatically
Do you see your transport of copy in the import buffer of your Q-System ?
I hope it helps
br Xavier

Similar Messages

CHaRM-Handling old transport request before CHARM was activated.

Hi All,
Recently i just activated CHARM in solman-SM1 for new a project implementation. This CHARM was setup in in such a way that it tie to one of the local IMG project EPROJ in developmemnt-DEV. Now i have one concern and that is those transport requests where created before i activated CHARM.
These old transport requests were crerated directly in DEV without project assigned. Therefore, we tried to assign IMG project EPROJ (the same IMG project setup in CHARM) into those old transport request manually.
Problem : When i tried to perform released step in CHARM tasklist it says that "No transport request found"
Question : How do i make CHARM to pickup those old transport requests?
Really appreciate your feedback as there are a lots of old transport request which needed.
Thank you.

Hi,
If you use Change Request Management, you should always use Change Request Management means to create transport requests; that is, create transport requests in a change transaction or in the task list.
Manually registered transport requests can be assigned to a task list only, not to a change transaction. If you use change transactions ,,,,the system does not take into account transport requests that you added manually.
This note is what you want
Note 1150426 - Registering transport requests in ChaRM
Hope it solve ur problem completely.
Regards
Prakhar

Error in transporting request through charms

Dear Experts ,
recently refreshed my quality systems data with production data ..and finished successfully, but we did not take any screenshots before doing refresh in quality
my problem is we already configured charms in solution manager to transport requests to production system ...
now we are not able to transport request through charms .. because rfc connections are changed in quality ...
please let me how can i recollect quality rfc connections for charms ...
i dont have idea about charms configuration to reconfigure in quality.... please help in this
Regards

Hi,
You need to transport the ODS 1st and then the transformation.
The main reason for most of the transports to fail is:
1)Transporting each and every object in the same transport request.
Ideally,
          u2022The Infobjects should be transported first in a separate request.
          u2022Then the Data source and the Info providers (Cube, ODS, Data source and Multiproviders) together in a separate request.
           u2022At the end the transformations and the DTPu2019s in an another separate request.
If the above mention sequence is followed while transporting the transport failures can be avoided.
2)Also when a change is made to an ODS (I object added or deleted) it should again be transported along with the transformation but in separate request.
I.e. the ODS 1st and the transformation.
hope this helps.
Regards,
Mahesh

Unable to release Transport request in CHARM

Hi all,
After Setting up CHARM,created a Transport request,while releasing it thru CHARM gives error:"Release of system Q11 Could not be determined"
rgds,
rajesh
Message was edited by: rajesh
Rajesh M

Dear Rajesh,
1.Did you released the Task of the request in satellite system?
2.What error you get when you check inside the task list of that correction.
Please give inputs,which will help us in solving the issue faster.
Thanks and Regards,
Avinash.

Error when creating transport request in Charm for Portal

Hello Guru's,
I'm configuring ChaRM for our Portal environment using CTS+
When I create a transport request I get the following error message:
Parameter EPD not in version of tp configuration.
Any thoughts????
Regards,
David

Hello David,
Please review the following SAP Notes to see if they will assist you on resolving the issue that you are having:
1107361 - Migration BAdI-Implementation Error Message XT 465
45548 - Transporting language-dependent objects
Hope this helps you out!
Thanks,
Mark

Merging Java Transport request with Abap Transport Request in Charm

Hello All,
We have activated the Change request Management in Solution Manager. Therefore transport request of type workbench and customising can be created when you choose action 'Create Transport Request'.
However we have some SAP systems that have CTS+ integrated which allows to generate transport request number and attach objects in PI Integration Directory - java transports.
Question is - Is there a way we can integrate the java transports generated in these SAP systems with Solution Manager CHarm and transport creation.
Or can we assign the java transports to charm in any way.
We are basically looking for how when users create Charm, the abap and java transports relating to the charm are generated and created only from Solution Manager manager or how these two transports can be linked together in Solution Manager.
Thanking you in advance for your help.
Tolly

Hello Friends
I have read the links and followed the instructions and tried to create object
TABLENAME R3TR TABU and tried to save it.
I keep getting a warning message
Note: ZTABLE1 is an application table
Object TABU ZTABLE1 has object function "k", but no key.
(I don't know what key to enter. I tried the Key field name, but it said 'Enter Numeric values only').
If I ignore and save and try to create transport request and then import it on a different server, again only table structure is getting transported and not the contents/data of the table.
I would appreciate if some one can please let me konw what I am doing wrong.
Thanks
Ram
Edited by: Ram Prasad on Jun 2, 2009 3:38 PM
Edited by: Ram Prasad on Jun 2, 2009 3:40 PM

Error when importing a Transport request in CHARM???

Hi all,
when i am trying to import a transport a request( thru CHARM) , its throwing an error " No valid system specified (Q11)" and "Import error: Check TMS Alert Viewer in target system"
Note::I was able to create a Transport request , release it but facing problem while importing to quality system.development system is ECC5.0 and quality is ECC6.0
rgds,
Anand

HI abhi,
i havecreated the domain link, my ECC5.0 and ECC6.0 are in one domain of which ECC5.0 is domain controller,now i configured Solution manager as new domain controller and created a link between these two domains...
now my queries are:
1.is it enuf if i create a link between or even shud i create som transport routes between the newly added system from other domain and the existing domain
2.i am not able to see the STMS configuration in solution manager system.ie in my ECC5.0 system( domain ctrller)if i goto STMS->Overview menu-> transport routes i see the configuration, which i cannot see by logging into solution manager and wentto STMS->Overview menu-> transport routes i dont see
rgds,
Anand

Issue when transport request of Text Control

Dear Gurus,
I have some problem when modified Text controls.
Requirement
My customer want to copy item text from Quotation which is use access sequence 9000 to item text in Sale Order
What I do.
1. I go to SPRO -> Sale and Distubution -> Basic Function -> Text Control -> Define Access Sequences For Deermining Texts -> Sales Document -> Item -> Textproceture -> Text ID's in procedure of Sale order Item
2. I input Access squence 9000 to sepecific Text ID and ticked "Refer/Duplicate"
3. I save and I get the Transport Request
4. I create sale order reference Quotation and the result is system copy text.
5. Then, I transport request to Simulation Server.
6. I create sale order reference Quotation but this time system does not copy text
I want to know why problem is occurs. if you have reference document about this issue please tell me.

Hi,
Run the program 'RSTXTRAN' using transaction SE38 and attach the Text object to your TR.
Last time I faced the same problem.
Everything gets transported except Text object.
Hope it will be useful to u.
Revert if not resolved.
Regards
Amit
Edited by: Amit Gupta on May 14, 2009 7:31 AM

Issues while transporting requests to an upgraded system

Hi all,
There is a development system which is upgraded.
prior to upgradation of this development system , we copied all the abap developments to a temporary system, where developments were done until development system is upgraded.
As of now , we are manually copying the changes done in temporary system to the upgraded development system,
     i.e for ex; Manually copying the code of a program in temporary system to upgraded development system
Instead of manual copying of the developements/changes from Temporary system to development system, can we move the requests directly from
temporary system to development system.
Please let me know ,what are the issues raised while moving requests ( of programs,tables,scripts,smartforms..... e.t.c ) from temporary system to development system
Thanks in advance.

There's a new 'check' that can be done when transporting CRs throughout your landscape. It is the unconditional mode "Ignore Invalid Component Version".
This feature (check the component version) was included with SAP_BASIS 702, so the tp checks the component version of the system where the transport was released (this information is included in the transport) and the component version of the system where the transport is going to be imported.
This component version check feature will check all the components version between source and target system. So before choosing the 'Ignore' option, please try to make sure that the software component version that the objects contained in the request belongs to, should be the same between the systems, to avoid any inconsistencies. It is recommended to transport request in systems which are on the same support level or use the same add-ons.
The component check is a hint that you will import a transport which come from a system which is different from the target system. It only checks the installed add-ons and support packages. This means if you have in the source system installed a add-on which is not present in the target system of the transport you should aware that you import no objects which depends on the add-on which is not present in the target system, the same point belongs also to different support package
releases. This option was implemented to reduce the risk of inconsistencies. If you import the transport please use transport option "ignore invalid component version".
This import option means that transport requests can be imported even if their component version does not match the current component version (including Support Package Level) of the system. This is the case if the component version of the system is either new (the Support Package Level
is higher than that of the export system) or too old (you first have to have imported the Support Packages before you can import the request). You should only use this option if you are sure that the content of the transport request is independent from the component version.
If it is required to avoid this check you could set transport parameter SP_TRANS_SYNC with value OFF and this check will be not performed from tp, but I would recommend to use import option "ignore invalid component version" before you would import the transport.
transport parameter SP_TRANS_SYNC = OFF.
Parameter SP_TRANS_SYNC is delivered ON by default.
This option will avoid the check of the component version.
Some notes regarding this feature:
1581638 - SAP component checks no longer working in TMS
1577714 - Transport requests in Check requirements phase
1650265 - TMS workflow: 'Ignore Invalid Component Version' missing
1742547   Information about component version check in TMS
1756116   TMS Component Check: Fix for excluded component logic

Issues with transport request

Hi,
I have this situation:
There is a table. And multiple changes have been made in the development system (under multiple transport requests). Now what I want to do is, create just one transport request(to be transported to production) which will club all these changes.
How can I do this? Are there any specific issues that I need to take care of?
Thanks..

Hi one simple way u can do it
In SE01 first u release all the TO that u have created for that table
Now u goto changemode for the table in SE11
then click on save, it will ask another req number
u create new one and save
and transport this TO number to production.
that will work
reward points if helpful
regs
Manas Ranjan Panda

Issue in transport requests

i am facing problem in transport request in Production Server, changes are not reflecting whereas changes are perfectly reflecting in QA Server.
Regards,
Majid

This is a very generic question, without information we just can guess...
Whats been transported?, Did you check that the changes are been reflected in the objects transported?.... Any logs?...
Not enough information, read the "Rules of Engagement"
Regards
Juan

Issue in Transport Request

Hi,
I am trying to understand how does transport works. I have a issue while moving some SAP BW objects.
Transport X - Containts - A process chain , Transformations, some newly created variants and routines. - Moved to Q.
Now the problem is I dont need to move the Process chains to Production, that means I need to move only transformations, newly created variants and routines.
How do I do that.
If I create another transport Y- just containing the objects apart from process chain and take that TR to Q and then to P will it work. and stop the TR - X in quality.

Hi Abdul,
Thanks, but I know the solution, what I am trying to understand here is the mechanism and any proof like SAP documentation to support it. Please see below post.
Ok, got it, but what I am trying to get here is rather than a hypothesis, a theorem.
Lets see it as a experiment- first creating an ideal conditions-
1) No Human error as in nothing to forget,no wrong sequence or anything.
2) As Mathew said , that seems logical as if I split the class and method it wont work, but what if I always capture the complete object. As in, in the new TR i capture the complete class and the methods again . then what?
I am trying to get here the science behind the transports, everyone has diff experience with TR, I consulted some colleagues, they say - yes if i move the Z TR it will work,
But what exactly happens , when we release the TR. Does the co-files and the data files contains the complete object or just the version change.
If the version change it definitely wont work, if it contains the complete object I don't see any reason of its not working.
Am i clear in my question and concern."

Issue Regarding transport request

Hello,
Can any body let me know
whether the table entries trasnported to Quality Sytem should be in Workbench Request OR Customization request.
Which is the best practise to transport entries in a table which were done using SPRO in enhanceing the customer master data screen by creating a subscren .
thanks

the entries will come under the customising request and the table definition(ZTABLE) will come uner the workbench request.
Check these links
http://help.sap.com/saphelp_nw70/helpdata/en/57/38dd924eb711d182bf0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Regards
Gopi

Transport request deleted - how can I delete the link in CharM ticket?

Hi everyone,
yesterday, I manually deleted an empty transport request in the development system. Bad idea, I know, because now, I get errors in the CharM ticket, because it still has a link to the transport request, which has been deleted.
How can I get rid of the broken link in the CharM ticket?
Thanks in advance,
Ben

hi
Please check if you can decouple transport request using charm
also if you can let us know what kind of error in charm ticket will be helpful
Saravana

Tables in ChaRM- Transport Request & Tasks

Hi,
Need the table name which contains the Transport Request details & Tasks( In Transport Request) with statuses in solution manager and not in R/3.
In which table we get the details.
Regards
PK

Hi PK,
as you have E071, E07a... in satellite systems you have the same in Solman for transport requests of ChaRM.
All of them start with /TMWFLOW/REPExxx
For example E071 become /TMWFLOW/REPE71O or /TMWFLOW/REPE71R
I dont remember exactely whats the differeence between both. Does it refer to Open and Release. I ll let you confirm that cause i don t have ChaRM on my Solman here.
One more thing; if it s for reporting matters; be aware that they are not always as up to date as the ones in satellite
Threre is a job on your Solman that must be planned that updates them regularly. This job is something like cmssyscol2 if i remember well
Hope this helps
Regards
Khalil

Issue in Transport Request of ChaRM

Similar Messages

Maybe you are looking for