Issue in unit of measure

Hi,
Suppose I have a material whose base UOM is "SHT" and order UOM"Kg".
The system converts the qty of material received in Order UoM as per the conversion factor maintained which may differ from actual qty in Order UoM charged by the supplier in his invoice.How can I solve this issue

Hi Indraneel,
Please check on the Base UOM Decimal and Order Unit Decimal. You might need to change (increase decimal rounding) the Decimal rounding for the Units using CUNI.
e.g. If you are maintaining a decimal rounding off 2 decimals, then the system converts and rounds off the qty. Try to increase the decimal rounding off (say, 4) of the UOM and see this problem gets solved.
or Please list out the complete scenario.
Best regards
Amit Bakshi

Similar Messages

PO outbound IDOC - Issue with Unit of measure

Hi,
I am facing issue with unit of measure.
1) In the PO outbound idoc in segment E1EDP01, the unit is always converted into ISO code and sent. Is there any way to avoid it.
2) Now while changing unit to ISO code, it checks if it is preset in T006 table. Now in some of the cases like Unit FT3, there are no entries in T006 table, hence IDOC is going into error. Let me know how can this be resolved. Do I need to update T006 table if yes then how can I do it.
Thanks.
Regards,
Shahu

Sorry.. Posting it in ABAP Development forum.

PO outbound interface - Issue with Unit of measure

Hi,
I am facing issue with unit of measure.
1) In the PO outbound idoc in segment E1EDP01, the unit is always converted into ISO code and sent. Is there any way to avoid it.
2) Now while changing unit to ISO code, it checks if it is preset in T006 table. Now in some of the cases like Unit FT3, there are no entries in T006 table, hence IDOC is going into error. Let me know how can this be resolved. Do I need to update T006 table if yes then how can I do it.
Thanks.
Regards,
Shahu
Edited by: shahuraj shirure on Mar 5, 2008 1:06 AM

Its always that while sending Units from SAP, it needs to be sent in ISO code and SAP always receives units of measure in the ISO unit format only.

Unit of measure issue

Dear friends,
issue : for Unit of measure EA , decimal is allowed. i.e in sales order or PO system will allow 10.334 EA . I need it without Decimal.
issue resolution status: I have maintained NO decimal in T code CUNI for UOM EA. But till sytem allows Decimal . I tried with Fresh PO, SO, MB1C etc .
Please help me to resolve .

HI
In CUNI under Display area for Decemial Places see what is the valid number range maintained .
I think it is 0-14 , then input 0 instead of NO and try again

Unit of Measurement in Material Master

Hello Experts...
I have an intresting issue on Unit of Measurement. I would like to maintain alternative unit of measurement as per below..
1 EA = 1 EA
1 ROLL = 5000 EA
1 CT = 150,000 EA
However the field UMREZ length in the material master allows me to enter upto 5 digits...and also it is not possible to enter decimal digits here.
Have any one of you faced this kind of issue, if any one faced what would be the solution for this...?
Look forward to hearing from you..
Cheers
Umakanth..

Hi Umakanth,
For increasing the numerator for conversion of base unit of measure, UMREZ would be appending the structure SMEINH by requesting Access Key from SAP.
Even though its not a suggestible decision to append standard SAP structure , if the requirement demands we may need to do that.
Cheers!
Sudhakar Reddy

Conversion of alternate unit of measurement

Hi,
System will not allow to enter conversions of unit of measurements in decimal points. But is there any configuration or method, we can force system to accept conversions of unit of measurements in decimal points only? (For example 2.5kg = 1pc, base unit of measurement is 'PC' and alternate unit of measurement is 'KG')
Regards,
Sattuj

Hi,
For the given example of Alternate conversion you can use the following setting :
2.5 Kg = 1 Pc
Put the Values as :
25 Kg = 10 Pc
With this the objective of Decimal is achieved.
Please check the following posts for more info :
[Re: variable order unit]
[Re: Base Unit of Measure]
[Re: Issue in unit of measure]
Hope it helps,
Best regards
Amit Bakshi

Issue: Proportion/produciton unit of measure NO is invalid for item 900001.

Hi All,
Issue: Proportion/produciton unit of measure NO is invalid for item 900001.
Here we have MTO Scenario: In outbound delivery when we do batch split & batch determination we are getting the above error.
Consider the following settings: at MM01 - Prodution/Proportion unit data is maintained with a characterstic specific to batch. Means Batch specific unit of measurement. In Work scheduling view produciton unit, unit of issue are maintained as 'NO'. All these settings are same for all material codes.
Please suggest us why we are getting the issue for perticular material coce.
Info: We resolve the issue by adding one more line item in the sales order & do the transfer posting the stock from line item to line item. But this is not the permanent solution.
Regards
Chowdary

I believe the error message no is VL 382 (Proportion/product unit of measure & invalid for item &)
You need to double click on the error message flashing on the status bar to get the error number.
I believe long text for the error message is self explainatary. Refer it and make necessary changes to resolve the issue.
Diagnosis
You want to use a proportion / product unit for an item.
You are not allowed to change the unit of measure into a proportion / product unit if:
- The following exist for a sales document item:
Preceding documents
Subsequent documents
- You are processing a scheduling agreement for the component supply industry
- You change the target unit of measure in a scheduling agreement item (and the sales unit is not a proportion / product unit)
- You are processing a customer requirements plan
- The following exist for a delivery item:
Preceding documents
Subsequent documents
Batch split items
- You are processing a batch split item
Procedure
Use a different unit of measure.
If you want to change the target unit of measure into a proportion / product unit in a scheduling agreement item, you need to change the sales unit accordingly. The system then sets the target unit of measure to the same as the sales unit.
Further, if you are working on older version, refer SAP Note 364206 - VLSP:indic.for proportion/product quantities deletd.
Regards
JP

Unit of measure for stock , Goods issue , Purchase.

Dear All Experts,
How we can maintain different unit of measure for Stock, Goods Issue, Purchase?
Regards,
Sandeep.

Hi,
The UOM qualifies the quantity you enter on the
purchase order line. This will default in if you entered an item number, if not enter
a UOM of your choice using the List of Values.
Please Refer the following links...hope it helps you....
http://help.sap.com/saphelp_45b/helpdata/en/c6/f83bb94afa11d182b90000e829fbfe/content.htm
http://www.admin.cam.ac.uk/offices/finance/training/manuals/inv_training_stores_user.pdf
Regards,
Udaya.

Variable issue for Alternate Unit of Measure

Hello Experts
I have implemented the soultion for reporting data in Alternate Unit of measure using the "How to..." guide provided at https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f
This solution involves creating a variable which prompts the user to enter the required unit of measure.
However I have a situation where I would like to create variable which is not input-ready and has a fixed value assigned to it without prompting the user. Moreover, I cannot modify the already existing input-ready variable as it is used in other Queries.
Does this involves creating a new user exit or modifying the existing user exit. If yes then can you please tell me how this can be done.
Thanks
Rishi

Hi Rishi,
You can follow any one the below procedure for solve your issue.
1. You can change the variable by removing the check box "Ready to input". But you mentioned that you used that variable in other queries also. So, I am not suggesting this.
2. You create a new variable same as the existing variable but with out selecting "Ready to Input" check box. Now when the user run the query, that variable will not be seen to the user. Now, we will see the customer exit, you assign new variable value to existing variable, before that you have to write a condition for checking the query name. If you are running the query which have the new variable then assign the variable value to old variable. This will solve your question.
I hope you understood this procedure. If you have any doubts let me know.
Regards,
Patil.

Reservation Creation in Issue Unit of Measure

Hi,
I have a product whose component has Base Unit of Measure as EACH and Issue unit of Measure is PIECE. ( 5 Piece = 1 Each) .In BOM we maintain as PIECE and in Work Scheduling view of materialMaster issue unit is maintained as PIECE. Now the issue is, when I create an order reservation is created in EACHs. (Base Unit of Measure) and same appears in Stock requirement list also.
If my Order issue Qty. is 2 PIECEs but still Reservation will be created for 1 EACH ( 5 Pieces) which upsets the requirement figure for the components.
Please suugest me if there are any ways out so that Reservation is created for Issue Unit of Measure so that correct quantity of measure can be seen....
Thanks in advance

Not sure whether it will help you.
Have you maintained the relationship in MM in Additional uom tab.
Also check t code CUNI if any conversion factor you can mention there.
Regards,
Divraj

Issue in Alternative unit of measure (MARM) update using MM17

Hi,
I have tried to update alternative unit of measure (MARM) for some materials using MM17.
It is working for some unit of measures (Like FT).
But if I try to changes the unit of Measure value for PLB (Counter & Denominator) or DLB it is changing for UNC, if UNC unit of measure is not there for that material then the UNC is getting created.
But according to MM17 functionality I think PLB values should change.
Please check and let me, if you have any solution or any one faced the same issue.
Thanks
sham.

Hi Sham,
Your problem could be caused by wrongly assigned ISO codes to the unit of measures involved. Most probably to these unit of measures   the same ISO code is assigned. This leads then to problems in the ALE interface of the material master, which is used too by the mass maintenance transaction MM17.
There only the ISO-code is given and then the System doesn't know the correct unit of measure, which
should be used. So it is possible, that the change is done for a wrong unit of measure.
Please check for this your customizing in transaction CUNI.
Regards
Mauro

Unit Of Measue issue in Alternative Unit Of Measure

Dear All,
We have one issue regarding material volume which is having Base Unit Of Measure as 'L' - Litre.
Example: one material AAA is having BUoM as 'L' but this material volume is .002 M3. This value we can maintain in Basic Data but we are unable to maintain the same conversion in Alternative Unit Of Measue as 2 M3 - 1000 L.
When we are entering this value, by default - system is picking 1 M3 - 1000 L which is coming from T006 table - SI Unit of Conversion .
So how can i resolve this issue and what should i do to maintain 2 M3 - 1000 L.
Regards,
Durga Sana

Hi Srinath,
Thanks for your reply.
The same thing has been checked in CUNI there the standard conversion is maintained as follows..
1 KL = 1 M3 , 1 L = 0.001 M3 and 1 M3 = 1 M3.
Which is we are able to see in T006 SI Unit of conversion table.
If i change this standard conversion to 1 KL = 1 KL and 1 L = 1 L that means we are removing the relation between liter and M3 combination. Is this change may impact in any other transaction?..
Regards,
Durga Sana...

Unit of Measure for Cases issue

Hello all,
We are working with APO as the source system. In one of extractions we are getting cases information and the unit maintained there is CV. Now when i am trying to load the data into BW it is saying that for CV SID generation problem. When i checked the T006 table there when I give CV in the unit of measurement and display the content it gives me a record with CS. When i check the SPRO setting for unit of measurement, I found there is an entry wherein Unit is CS, Commercial Unit is CV. Now if i want to resolve this issue what is procedure i need to follow.
Regards
Vijay

Try reload units of measure from source system and do correspondin cheks for 0UNIT in RSRV transaction

Issue unit of measure being used in purchasing tab of work order

Hi, I've got a material with a base unit of measure of 'EA'. This material has a issue unit of measure 'BOX'. When I go to add this material as a component to a work order the unit of issue 'BOX' is used as the base unit of measure. This of course is incorrect. Can anyone shed any light on this?

Not sure whether it will help you.
Have you maintained the relationship in MM in Additional uom tab.
Also check t code CUNI if any conversion factor you can mention there.
Regards,
Divraj

EDI unit of measure issue

One of our customers orders a product in unit measure EA (each). Our stock-keeping unit is PL (pail). The output does get processed and issues message:
"PL is not assigned to an ISO unit of measure (item 000001, field VRKME)".
Even if I updated the table for PL, I'm almost certain it will be rejected by our customer because their system is expecting the line item to have unit of measure "EA".
I would appreciate suggestions as to how to address this issue.
Thank you,
bak

Hello,
In the SPRO --> IMG --> General Settings , you have measurement units setting. in this you have ISO code maintenance. Check whether PL is assigned here.
Prase

Issue in unit of measure

Similar Messages

Maybe you are looking for