Issue in uploading Employee Group and subgroup in LSMW

Hi Experts,
   I`m using LSMW to upload IT 1013 data thru transaction PP01. When i run the LSMW in forground mode , then everything seems to work fine. But when run in background mode, I find that the records are not getting uploaded and its giving me some error like "Runtime error RAISE_EXCEPTION has occurred".
Any input regarding this would be helpful and appreciateable.
Regards,
Farhana

Hi Anatha,
    I tried PP02 and it also shows me the same error and also the my data files has only 4 records. I`m using only 4 records for testing, so it could not be a mass data load issue too.
Regards,
Farhana.

Similar Messages

  • Creating Employee Group and subgroup in OM

    Dear Viewers,
    I am new in this SAP, I have started learning SAP HR / HCM. Presently I am learning OM and creating Organisational Structure.
    Can anyone help me in giving examples to create employee group and employee subgroup categories.
    Thanks & Regards,
    Soujanyah

    HI Swapnil,
    Thank you for the link.
    I have got a sample by searching in google
    [http://www.laccd.edu/hr/Documents/HRGuide_H-300_EmployeeSub-Group.pdf]
    Can I get some other samples please as specified in that table as EG and ESG

  • Propose or change automatically, Employee Group and Subgroup.

    Dear all, when executing an exit Action, thru transaction PA40, what's the best way to propose by default/change automatically, the employee group/subgroup?
    Example: I want to change the employee group from '1' (Active) to '2' (Inactive), but the fields are disabled for input.
    Do i have to do this thru the enhancement "PBAS001", or is there any way to do this thru configuration?
    Sincerely,
    Hugo Ferreira

    I was searching for something in SDN and got this post.
    Though it's a very late reply, whatever Sreenu has told is correct.
    In the table T529A, you can define the employment status wehther it has to be active, withdrawn or inactive.
    This field is input disabled in the action and the values will be defaulted from the configuration.
    But Changing the employee group and employee subgroup , we can't change. If that is what is required, the values might depend on the configuration.
    And even through some enhancement also we can't change. because, for IT0000 no enhancement are available. Even though the fields are from IT0001, I doubt it can be changed through enhancemnet.
    If you have already achieved it through enhancemnet, please let us know.
    Thanks,
    RSS.

  • Change employee group and sub group

    Hi all,
    During the new hire if an employees group and subgroup are enetered wrongly, how shouldl they be corrected. We have scenarios when the emplooyes group and sub group are corrected after a month or so and the users want to correct the same
    How do we do it?

    Goto PA40 reselect the same Hire action for this employee and click execute. In IT0000 screen enter the new EG/ESG.
    and save it. Then Save the IT0001, then fill rest of the infotypes.
    If you have already process the payroll and the new Emp group / Sub group is in different payroll area you wont be able to change it.

  • Employee group and Employee Subgroup....

    Hi Experts,
    I am just learning SAP now..... 
    I had created employee group(1 Employee) and employee subgroup(3Y executive), and i assigned employee group to subgroup, and i checked in the table T503Z,, even though it is showing an error while creating relationship.... the error is "entry 1 3Y doesnot exist in T503 check your entry" .
    please reply me with IMG Path(SPRO)
    regards
    gosammy

    spro>Personnel Management>Personnel Administration>Organizational Data>Organizational Assignment-->Define employee attributes(V_503_C)
    I think u missed this table , here u have Activity Status, Employment status, Training Status.Keep the cursor in the relevant feilds and go for f1(help) and  fill the data
    Best Regards,

  • Creation of new employee groups and sub groups

    Hi All,
    What all the steps should I follow to create new employee groups and sub groups? and  How many structures should I create for this?
    Its urgent pls.......
    Good replies will be rewarded!!!!
    Regards,
    Sita

    Hi
    You can create the employee groups depending up on your clients requirement, Eg: Permanent, Temporary, Seasonal, Trainee, Advisor etc
    And define the employee subgroups and assign them to the employee groups Like
    Enterprise structure>Definition>Human Resource Management-->Employee Groups & Employee Groups
    Enterprise structure>Assignment>Human Resource Management-->Assign employee subgroup to employee group
    you can create employee subgroups depending up on your requirement like asst manager, manager, GM, MD, VP ETC an assign them to the employee subgroups ok.
    Ensure that certain empployee subgroups may not be assigned to employee group based on requiremen, but create all the employee sub groups which is existing in the organization.
    Regards

  • Pharma specific fields (group and subgroup)

    Hallo,
    I have problems with specific Pharma fields (group and subgroup) in CRM Mobile 2007 SP02.
    Some business partners have group and subgroup in pharmaceuticals bookmark in transaction BP.  But in mobile solution I have these business partners without group and subgroup. The combobox for group and subgroup is empty too.
    In table SMOKNA1 (in CRM server and in CRM mobile are columns KVCGROUP and KVCSGROUP empty). I tried make initial load for object CRM_DNL_BPGROUP, but all is the same.
    Have anyone suggestion what I made wrong? Which subscription I need for these attributes.
    Thank you for your help.
    With regards,
    Jiri Halmich

    Hi,
    the issue with the customizing data is solved as Jiri already mentioned above.
    Btw: After synchronizing an adapter object you don't need to run an extract as this is done automatically by the system - and only for the changes (delta sync), not for the complete subscription...
    Concerning the missing data in smokna1: For my understanding this is a standard error. You should create an OSS message for that.
    If you prefer to solve it at your own you would have to do some coding in the Mobile bridge. Using the EEWB dosn't help as the fields are already there in the tables and BDocs.
    Of course you also can chose a "quick & dirty" solution: Create a new CDB table, containing only the sfakna1 and the both BP group fields, define an adapter object which synchronizes the both fields from BUT000 to this table and calculates the sfakna1 field by keygen. Run this adapter object by using a batch job at least once a day. Create a new sBDoc and qBDoc based on this table. Do some small coding in BOL to retrieve the both properties from the new CDB table into the both BOCAPGEN properties.
    Regards,
    Wolfhard

  • Defining / Assigning Employee Groups and Sub Groups.

    I have defined a Personnel Area for e.g Barron Hotels - London  BH01 and Barron Hotels - Manchester - BH02.  I have also defined  there respective Personnel Subareas.
    What exact steps much I take to define the Employee Group and Employee Sub Groups and how do I link (Assign) them to corresponding  the Personnel Area  and Personnel subareas  defined above.
    Can some one please show me the exact steps. I have heard SM30  and V_503_ALL  mentioned but how  exactly are these used.
    Many thanks.

    Hi Tomuri,
    There is no link between EG-ESGs and Personnel Area -Subareas..  All these form an Enterprise Structure for an organisation and it can be seen against an employee in IT0001 - Org Assignment.
    Well, you have created PA as well as PSAs.  Now what you do is, similarly create EG- ESGs.. say for example..
    Emplyee Groups as A- Associate, B- Managers... etc...
    Employee Subgropus as A1, A2,..  B1, B2.. etc...
    Path: IMG-> Enterprise structure->Definition->Human Resources Management-> Employee Groups and
    -> Employee Subgroups
    When you create Personnel Areas.. you need to assign them to a Company Code...
    Path: IMG-> Enterprise structure->Assignment->Human Resources Management-> Assign Personnel Area to Company Code
    Similarly, when you create Employee Subgroups, you assign it to Employee Groups (EGs)
    Path: IMG-> Enterprise structure->Assignment->Human Resources Management
    -> Assign employee subgroup to employee group
    Next is the table you mentioned in your query... V_503_ALL... this clubs the groupings for -> ES grouping for collective agreement provision, Employee subgroup grouping for primary wage types, time quota types, work schedule etc,,, these are according to company requirements..
    For any further queires, do reply...
    I hope the information proveded helps you...
    Award points if the query was resolved...
    Good luck..
    Regards,
    Shweta

  • Singapore - Employee Group and Sub groups

    Hi Gurus
    While making employee groups and sub group for SG what factors should one keeep in mind??

    Hi,
    When we are assigning the employee groups to sub groups select 25 singapore country allowed in the table V_T503Z.
    that factor we need to remember.
    Good luck
    Devi

  • How Employee groups and Organizational units are related

    Hi All,
    I had a requirement for bulk upload of Appraisal documents.
    I am an ABAP Consultant.
    Here client wants the Employee group as a Selection Criteria.
    Based on this I had a query how can I get Organizational units from Employee group.
    Actually this is my requirement and if any alternate solutions & suggestions are also welcome.
    Thanks for your time.
    Edited by: nayani pavan on Dec 30, 2008 3:17 PM

    Hi Madhu,
    Thanks for your reply, it is helpful and I need this query.
    Suppose for an organizational unit there will be subordinate organizational unit.
    That means how can I found whether is there any subordinate organizational unit for any organizational unit.
    Hi Ananth,
    But the requirement is in selection screen only Employee group will be available.
    Based on that we need to provide logic. So, I hope above solution is not helping me because they do not want to create appraisal documents person by person. Please guide me.
    Thanks & Regards,
    Pavan.
    Edited by: nayani pavan on Dec 30, 2008 3:56 PM

  • Item grouping into groups and subgroups

    In case there are a lot of items in Business One, companies usually group these by item groups. In some cases when there are thousands of items, these are further on divided into subgroups by using UDFs. Then when you are making, say a sales order, you first look for the item group and then for the subgroup. This is where it gets tricky. You can only display the code when browsing for subgroups. It is not possible to display the value within the description field (I do not know how to do it). The code lenght is limited to 8 characters and hence makes it difficult to write a proper description for this subgroup. Is there any way to overcome this issue?

    Hello,
    thank you Gordon and Deepak for your efforts. First level grouping (B1 standard) by item groups is working fine, the second level just displays codes. The issue is that the value within udf-field on item master data card (on the right-hand side) does display correctly. However when I search for this item, say when making a sales order, I will just get the value, not the description. It makes no difference if I select it in the document settings to display as visible.
    Codes and description for this udf-field are as follows:
    Code  Description
    100    Roses
    110    Tulips
    120    Lilies
    Now when I sort this field by subgroup value, it only displays 100, 110 etc.
    All help is appreciated.
    Thanks,
    Samuli Ajo

  • Problem with Group and SubGroup

    Hi All,
    I have one problem in sql statement. I got two tables, PARTY and SUBGROUP.
    <<party>>
    party     group     subgroup;
    WG009     xx     zzz
    <<subgroup>>
    party     group     subgroup;
    WG009     xx     yy
    I have to write a query which gives the result that 'zzz' is not in subgroup table where xx=xx from subgroup.group and party.group. I have written the statement like this, but its not working properly becuase its returning all the records from subgroup.
    SELECT P_CODE, SG_CAT, P_CAT, P_SUB_CAT, SG_CODE FROM PARTY, SUB_GROUP WHERE P_CAT=SG_CAT AND SG_CODE != P_SUB_CAT AND P_CODE='WG009';
    P_CODE SG_CAT P_CAT P_SUB_CAT SG_CODE
    WG009 DWD DWD ANIL SHAH GADAGE
    WG009 DWD DWD ANIL SHAH JAIN FAMILY
    WG009 DWD DWD ANIL SHAH DEDHIA
    Is any body have Idea.
    SKM

    select party,group,subgroup from party
    minus
    select party,group,subgroup from subgroup;

  • Need scripts for fetching groups and subgroups info , script for del users

    Hi ,
    I need a script or macro which will fetch list of groups and sub groups triend forums download did not fine one.
    I need another script which will delete listed users there is a macro in forums but it doesn't suit my rquirement.
    Any one have these scripts handy with you please help me with that,
    Regards,
    Neo.

    Hi Braham,
    Thanks for your quick reply.
    Are we able to do this on two stage method
    1. grab the security groups from the share paths
    if can grab the share path from a separate txt file than copying it to the <your path> location
    so i can modify the txt file
    once run the script
    if can the output like below to a CSV file
    \\servername\foldermain\folder1group 1group 2group 3\\servername\foldermain\folder2group 1group 2group 3then i know which groups belongs to which share paththen i can remove the duplicate groups and keep the common groups to grab the users belongs to itso with the second script same as the first copy the security groups to a txt file and the out put as below.what I needs is the users full name and the samaccount name ( user id )group 1user1user2user3
    group 2user1user2user3looking forward your help on thisThank you.Thilo

  • Issue on profit center group and profit center group hierarchy

    hi experts
    I have a requirement where i have profit center,profit center group and profit center group hierarchy.
    profit center group and profit center group hierarchy are same?if they are same how to get them into BI.if they are not same how to get them into BI
    im using two datasources 2lis_11_vaitm and 2lis_12_vcitm,how to connect the profit center group and profit center group hierarchy with the datasources,My dataflow is on top of these datasources there are two write optimised dso and on top of those w-o dso there are std dso and on top of the std dso there is a infocube.on infocube there is multiprovider
    Thanks,
    sivaram

    Hi Sivaram,
    Profit Center would be an attribute of any object which is used in the 2lis datasources. maybe CO Order or WBS etc...from these objects Profit Center should be or could be made as navigational attribute.
    Further you can load the master data and hierarchy from the datasource 0PROFIT_CTR_0106_HIER
    Hope this helps.
    Good Luck.
    Vikram

  • Issues with the Radio Group and interactive report

    Hi,
    I have an interactive report that shows customer names and associated revenues... I want my users to be able to filter customer list by Province and by City in a way that when the user select a province then only associated cities show up (driven by a table)... for the filtration I am using 2 Radio Group items (one for Provinces and the other one for Cities)
    Everything is working fine, except for the fact that when I select a province (let's say Prov A) and then select a city (let's say City A1) and again when I select another Province (let's say Prov B) I get the list of all cities associated to Prov B + city A1... Not sure why my previous selection of City is showing up with the list of new cities when I change the province... I SHOULD BE ABLE TO REST ALL CITIES WHEN A NEW PROVINCE IS SELECTED
    here is the code
    For interactive report
    select     CUSTOMER_NAME,
         SUM(YTD) AS YTD
    from     T_TABLEA
    where
    (PROVINCE=
    CASE
    when :P2_PROV = 'All' THEN PROVINCE
    ELSE :P2_PROV
    END
    and
    (CITY=
    CASE
    when :P2_CITY = 'All' THEN CITY
    ELSE :P2_CITY
    END
    GROUP BY CUSTOMER_NAME
    For Province Radio Group I am using a static list:
    STATIC2:All;All,Alberta;AB,Ontario;ON,Quebec;PQ,British Columbia;BC
    For City, I am using a dynamic list using following code:
    select 'All', 'All' return from dual
    union
    select distinct INITCAP(CITY) display_value, CITY return_value
    from T_TABLEA
    where
    Province = :P2_PROV
    order by 1
    Thanks

    Check the session state of items P2_PROV and *:P2_CITY* when the issue occurs and run the LOV query separately with the session state values.
    If that too fetches it wrongly, then you would need to change your query.

Maybe you are looking for