Issue in using IOS 7 Normally

I installed ios 7 and after installation i can not use my phone a black screen with apple logo and progress line appears on the screen for five seconds and then disappear showing program screen for 2 seconds and then do the same again, but i can get calls and use siri, please help me to use my phone again.
i could also be reached on [email protected]
regards

Hi Mukund!
I found this response on another forum thread that looked like it could help you out:
==============================================================
MSVC++ error (system error 998)
This is actually a Microsoft issue. It has something to do with static and
dynamic linking of the MFC DLL. Our R&D engineers have verified this with projects created with no LabVIEW code at all (that is why we believe it to be solely a Microsoft issue). There are three options at this time:
1. Link with the DLL form of MFC.
2. Do not link with the .lib from the LV DLL, instead use LoadLibrary and GetProcAddress to dynamically load the DLL and call the function.
3. Use the VC delayload feature to make the LV DLL not get loaded until the first call is made into it. See VC help on "delayload" for information on setting this up.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask
==============================================================
Hope this helps!
Travis H.
National Instruments
Travis H.
LabVIEW R&D
National Instruments

Similar Messages

  • How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

    Title says it all:
    How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

    Hi Auracles1,
    Here's a pretty discussion regarding wireless printing with this device and a Mac.
    http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/HP-Officejet-6500-E 709n-wireless-issue/m-p/258853
    I have a similar OfficeJet and it was a multi-step process. (1) Install printer drivers on the machine, (2) Add the printer queue in print & fax, (3) Run the "setup wizard" from the disc for wireless printing.

  • HT4436 I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same.

    I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same. Basically I am trying to take back to upgrade my ios to 5 or 6 version.

    You can't back up to iCloud until you update to iOS 5 or higher.  You will have to back up your iPod on your computer using iTunes.  Update iTunes on your computer to the latest version, then connect your iPod to your computer, open iTunes, if iTunes give you a pop-up asking if you want to update your iPod, decline.  Then click on the name of your iPod in iTunes, go to File>Devices>Transfer Purchases to transfer any purchased media to your iTunes library.  Next, go to the Summary tab of your iTunes sync settings and click on Back Up Now to back up your iPod on your computer.
    When it's done backing up, click on Check for Update (or Update) on the Summary tab of your iTunes sync settings.  Allow your iPod to update, and leave it connected to your computer.  At the end, it will restart and give you the option to restore to the iTunes backup you made earlier.  Choose this option to restore your backup and sync your apps and other iTuens media to your phone.
    This process is outlined in this article: http://support.apple.com/kb/HT4972, under "If you are attempting to update using a Mac or PC with which you normally sync".

  • I have an iPhone 4 using iOS 7.1.2. On my home screen at the email icon it shows I have over 11,000 unread emails. I have no emails and am not receiving any. Ipad shows I am receiving emails ok. Om my phone deleted folder is empty as well as Sent.

    I have an iPhone 4 using iOS 7.1.2. On my home screen at the email icon in red it shows I have 11,193 emails to be read.  I have no mail in Inbox, Drafts, Sent, or Trash. Where did this come from and how do I get rid of it. The number is printed in read on top of the blue and white emaiI icon. I contacted my cable company and through their website I can check my email. In doing this it showed I had 25 unread emails. Also, my iPad 2 is receiving emails fine.  So the problem is with the iPhone 4. What can I do to get rid of the number and make my mail operational? 

    Hello Kizzyk,
    I would start with taking a look at the settings to make sure that you are able to send and receive messages. If everything looks good then the next step would be to remove the accounts and add them back in. Take a look at the article below for more information and details on how to troubleshoot your issue further.
    Get help with Mail on iPhone, iPad, and iPod touch
    http://support.apple.com/en-us/TS3899
    Regards,
    -Norm G. 

  • Third Party Apps Not Opening on iPhone 5 using iOS 6.0.2

    I have an iPhone 5 and am using iOS 6.0.2 and recently certain third party apps like Facebook, Instagram, Shazzam for instance, no longer open.  When I tap on the app, the app comes up on the screen for about a second, and then closes.  What's strange is that I've been using iOS 6.0.2 and have also been using the most updated versions of the apps without any issues.  The crashing started happening around last Friday.  Here's what I've tried to do to fix the problem so far but none of these options have worked:
    - I restarted my phone by holding down the home button and the lock button. 
    - I turned my phone off and turned it on again. 
    - I deleted the apps and reinstalled them and then restarted my phone. 
    - I downloaded a random free app, opened it, and then tried opening the apps that kept crashing.
    - I restored my phone and synced it using the most recent back up I had, which was from earlier that day. 
    I did find a temporary solution, that allows the apps to open but I think it's because the apps are not the most recent versions. 
    - I restored my phone and set it up as a new phone.  The phone then downloaded all of the apps again and re-synced everything.  The apps did open after that however, when I went to the app store, it said that I had 24 available updates.  I updated all of the apps to their most up to date versions and then noticed that they once again stopped opening and would crash almost immediately after launching them. 
    - I then restored my phone again and set it up as a new phone and did not update the 24 apps and all but one of them work.  The only app that I've noticed that still doesn't work is the Blackboard Eats app.  It still crashes almost immediately after launching it. 
    I took my phone to the Genius Bar this weekend (which is where I was told to restore the phone and set it up as a new phone).  I'm thinking that the issue is purely a software issue, but is there any chance that it could be a hardware issue? 
    I suppose I could just not update the apps, but I'm hoping there's a better solution than that.  What's weird is that the phone was working with iOS 6.0.2 and all of the most up to date versions of the apps less than a week ago and it seems that somehow, overnight, they stopped working. 
    Is anyone else running into this problem?  Has anyone found a solution? 
    Thanks in advance,
    Kevin

    The music player does not remember where the last session ended.  I have about 1000 songs on my iPhone.  I play the songs in the Shuffle mode - and it worked fine on iOS 5.x.  Ever since I updated to iOS 6.0, the shuffle seems to be seriously broken.  It repeats the song sequence of previous session in the exact order instead of starting from where the session ended.  God forbid if your last session was 10-25 songs long - you'll have to hit the Next song so many times to listen to something that you have not heard for a while.

  • The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem.

    The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Is there a known issue for using IE11 when using business catalyst cms

    Is there a known issue for using IE11 when using business catalyst cms?  I have a client trying to update pages on her site using IE11 and the it says it updates successfully, but the new content is not saved.

    I concur with Barry; I see no significant difference in using the Home button vs. the gestures. But the "fade" effect is part of iOS 7.1 and there's no way to disable it that I know of.
    Regards.

  • Has Firefox been optimzied for the new Mac OSX Lion? I've been having issues using the browser since upgrading to Lion. Issues include using some websites as well as google e-mail...icons do not appear etc.

    when checking mail in google I am not able to 'star' an e-mail or mark it etc. I don't get the option to do that, as I did before upgrading to Mac Osx Lion

    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    If the problem is still there, try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
    Safe Mode
    Safe Mode - About

  • Hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

    hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date

    Hi,
    How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
    In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
    Get-MailboxFolderPermission -Identity
    CEO’s email address:\Calendar -User assistant’s email address
    Also check with:
    Get-Mailbox -Identity CEO’s mailbox
    | fl *GrantSendOnBehalfTo
    Please let me know the result.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • My iphone sorry, I restore my iphone ask Apple ID username and password? I entered, it can not reported to unlock my ID. I used iforgot the ID is not changed. I have icloud how active threads. I used ios 7.0.6. thank

    restore my iphone, iphone Apple ID requirements? but not to open it. I use iforgot ID. not be. I did not change the username and password. i need help. I used ios 7.0.6. thank

    Hi tuyet nhu nguyen,
    Given that you recently restored your iPhone, it sounds like you may be having issues with iOS Activation Lock. You may find the following articles helpful:
    iCloud: Activation Lock
    http://support.apple.com/kb/PH13695
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/ht5818
    Regards,
    - Brenden

  • Sync i-phone using iOS 7.0.4 with Microsoft Office 7

    I had been using iOS 5 on my iPhone 4S and had set up the iCloud on Microsoft Office to wirelessly sync my contacts, calendar and tasks; and it worked beautifully.  I had been holding off on upgrading to iOS 7 because I didn't want to have to use iMaps; but, I finally felt I had to do it.  Big mistake!  Initially, my phone locked up and I had to restore from my laptop as the restore would not work on my desktop.  Once I finally got the phone working again, it would no longer sync through the iCloud.  I have had to resort to using a cable between my work desktop and phone and even then, it will not sync my contacts and calendar correctly.  Apple has been less than no help with there only suggestion being that I should switch to Apple and quit using Microsoft.  Real professional!
    Anyone else having this issue and have you been able to resolve it?  What did you do?
    If I can't get my contacts and calendar to sync, half of the reason I have a smart phone is gone.

    HotTub wrote:
    ...  Apple has been less than no help with there only suggestion being that I should switch to Apple and quit using Microsoft.  Real professional!...
    If I can't get my contacts and calendar to sync, half of the reason I have a smart phone is gone.
    Rather than switching to Apple, use a smartphone that WILL sync with your calendar and contacts - a Windows or Android phone.  iPhones do sync with Apple products nearly flawlessly, but they don't play nice with other OS's.
    Android works well with Google; and Windows works well with, well, Windows and Microsoft products.  Android and Windows do cooperate somewhat.

  • I was using ios 5.1 and i created an id from india, nw am in qatar n i updated to ios 6.0.1 nw i cant able to purchase from the store.when i tried to do it says " your account is not valid in the qatari store. you must switch to the indian store before

    I was using ios 5.1 and i created an id from india, nw am in qatar n i updated to ios 6.0.1 nw i cant able to purchase from the store.when i tried to do it says " your account is not valid in the qatari store. you must switch to the indian store before purchasing" please help me with this issue.. hw i can switch to indian store..?

    How to Change Your App Store Account Location | eHow.com

  • Please assist. How can I make all the photos on my Iphone visible? and not only the recently added ones? I'm using IOS 8

    Please assist. How can I make all the photos on my Iphone visible? and not only the recently added ones? I'm using IOS 8

    Did you move to iOS 8 via iTunes?  Your photos should all be on your iPhone 5s without any issues even if you updated via WiFi.  The update should have no impact on your photos other than to have moved any photos in your former Camera Roll to your Photos.  When opening the Photo App you should see Photos and Albums available at the bottom of the screen.  You can also look at Settings>General>About and looking down the list your should see the word Photos and a Count at the right.  This count should represent all of the photos in your iPhone.

  • Audio Sync Issue streaming to IOS devices?

    Hi. We are trying to stream live content to both flash and IOS devices using the FMIS 4.5 and the stock livepkgr application. We are using the FMLE 3.2, h.264, with the main concept AAC audio codec. We have set the streamsynchronization variable in the FMLE XML setup file to "true"
    Flash player equipped devices can see the stream fine, with no audio issues. For IOS devices, the audio is in sync when you first connect, but after about 30 seconds the audio is starting to get out of sync. If I stop the playback on the Ipad, and re-start, it is in sync again, but goes out again...
    Any ideas?

    Make sure you have updated mainconcept encoder.. Here is an issue which came fixed in mainconcept plug-in version 1.0.6 .. More info at http://www.mainconcept.com/products/apps-plug-ins/plug-ins-for-adobe/aac-encoder.html
    Or use FMLE on Mac(if you have)..

  • Using ios 7.0.4 can a group email be sent either from icloud or iPhone by a means other than selecting the individual Contact, ie; can the group be selected and then an email composed that will send the message to all group members.

    Using ios 7.0.4 can a group email be sent either from icloud or iPhone by a means other than selecting the individual Contact, ie; can the group be selected and then an email composed that will send the message to all group members.

    Hi Richard, 
    Thanks for the reply - I think I've sorted it though and there isn't actually an issue.
    The whole group wasn't receiving the NDR, only the group manager which I setup a few weeks prior. This is a new feature so it complies with certain RFC's, basically the group manager will recieive the NDR to let them know there is a problem.
    Something to do with mass mailing and unsolicited mail.
    Ta
    Ian

Maybe you are looking for

  • Question about udev,hal, hotplug and new Xorg 1.8

    From what I understand the hal .fdi files now are ignored since the last upgrade of Xorg to version 1.8. Before that, I used to modify .fdi files and then restarting hal to get the modifications to work. I did this to configure my joystick and synapt

  • Value mapping with some return values

    Hi Experts,     I  am facing value mapping problem. My requirment was My source elemnet having 4 value mapping(Key and Values)  and also if not passing that 4 keys also it will  display same thing in my reciver.     Can Anybody please suggest me how

  • Submit page item using AJAX

    Hi All, Thanks for any help in advance. I am trying to submit an item into the session by using AJAX iin version 4.1 I have a application process which is an on demand: run this application process when requested by a page process. begin   :P4_FISCAL

  • Can not drilldown column 'CurrBudget'  in FM Report (FMRP_2FMB4002)

    Dear Friends, Currently, we are implementing Public Sector Management using Former Budgeting. Cost Center Planning is used for Original Budget in Fund Management. After executing FM9C (Plan Data Transfer from CO), we can display the planning by using

  • HOW TO FIND PAY DETAILS USING QUERY

    Hi to Everyone, i have to write a query to find the basic, da, perpay paid to an employee for a month(ex:may) for this query which tables i have to link and use. PLEASE REPLY IMMEDIATELY URGENT