Issue in using xdofx:round fn

Hi ,
In one of my form field, I have a requirement to sum two values after rounding them. I specified it as <?xdofx:round(<element1>,2) + xdofx:round(<element2>,2)?> , the o/p is null. So to debug I specified one at a time and the rounding works i.e. <?xdofx:round(<element1>,2)?> or <?xdofx:round(<element2>,2)?> the o/p comes up fine. Logically the sum should also come up. However, it comes up null. It seems like XML Publisher engine is not able to handle this kind of scenario.
I have ways to get over this issue (like doing calculation at query level) but am wondering what could be the issue ? Does any one has any idea about the same?
Regards,
Saurabh

Hi Saurabh,
Did you guess what caused issue, It was your wrong usage (Hope you wont mind)of the command.
The usage of XDOFX in both the places has caused the issue,
its a single command and remember your are enclosing it in <??>
so , i guess the context is getting lost if we use it multiple times in same command.
<?xdofx:round(100.1090,2) + xdofx:round(100.9098,2)?> for this NULL
<?xdofx:round(100.1090,2) +round(100.9098,2)?> for this 201.*******

Similar Messages

Using xdofx issue in BIP

Hi,
using xdofx issue in BIP
<?xdofx: if Status ='Open' then 'O' else if Status ='Closed' then 'C' else if Status ='Received' then 'R' else 'P' end if?>
the above statment working fine for me.
but when i add another if statement for another field i.e.
<?xdofx: if System ='AA' then 'Auto Adjust' else if System ='BM' then 'Billing Method' else System end if?>
then it always displaying P. I dont have any value or data for System. why it is printing P from the field Status? Cant we use xdofx many times in the report?
Thanks,
Anu

I am sure there must be a limit (right? :) ).
Why don't you just use one "IF" as at time in separate xdofx tags?
Only one be valid anyways!.
Regards
Jorge
p.s If this answers your question then please mark it as "Correct" or "Helpful"

How to use XDOFX function in IF condition?

Hi All,
We have requirement to display the age group of a person person.
i.e., if the person is age is in less than equal to 30 then display the age group as 1-30
if >=31 and <=60 then 31-60
if >=61 and <=90 then 61-99.
for deriving for the age i have subtracted the sysdate from DOB
<?xdofx:round((to_number(to_char(SYSDATE,'JSSSSS'))-to_number(to_char(to_date(DOB_DATE, 'YYYY-MM-DD'),'JSSSSS'))) div 100000)?>
My question is how do i use this calculation in for deriving age group.
Any pointers on this will be really helpful.
Thanks,
Jana

I am using the below way but it is not working as desired it is always printing the derived value.
<?xdofx:if (xdofx:round((to_number(to_char(SYSDATE,'JSSSSS'))-to_number(to_char(to_date(DOB_DATE, 'YYYY-MM-DD'),'JSSSSS'))) div 100000)) <= 30 then '(1-30)' else '(1-100)' end if?>
Let me know if i missed anything..
Thanks,
Jana

Performance issue with using buffering in a APPL0 or APPL1 Table

Hi,
Can anyone please tell me whether there's any serious performace issue with using buffering for a Master or Transaction table? I'm asking this because when I run code inspector for my transp table I'm getting information message:
Message Code 0011 ==> Buffereing is Activated but Delivery Class Is "A" and Message Code 0014 ==> Buffereing is Activated but Data Class Is "APPL1".
So what's other way round for improving performance.
Thanks,
Mahesh M.S.

Hi,
have you read the documentation?
Let me paste it here for you:
Buffering is switched on for the examined table and it has data type 'APPL0' or 'APPL1'.
Tables with data type 'APPL0' or 'APPL1' should contain master or transaction data, so these tables should either contain a large amount of data or their content should change frequently. Therefore buffering the table is unfavourable. Very large tables suppress other tables in the buffer memory and hence slow done any access to them. Transaction data should not be buffered because the synchronization of the changes on the various application servers is very time consuming.
In exceptional cases, small master data tables ('APPL0', size category 0) can be buffered.
The solution depends on the table content. If it is master or transaction data, the table should not be buffered. If the table content does not consist of master or transaction data, the data type should be corrected accordingly.
This should answer your questions...
Kind regards,
Hermann

Issue while using SUBPARTITION clause in the MERGE statement in PLSQL Code

Hello All,
I am using the below code to update specific sub-partition data using oracle merge statements.
I am getting the sub-partition name and passing this as a string to the sub-partition clause.
The Merge statement is failing stating that the specified sub-partition does not exist. But the sub-partition do exists for the table.
We are using Oracle 11gr2 database.
Below is the code which I am using to populate the data.
declare
ln_min_batchkey PLS_INTEGER;
ln_max_batchkey PLS_INTEGER;
lv_partition_name VARCHAR2 (32767);
lv_subpartition_name VARCHAR2 (32767);
begin
FOR m1 IN ( SELECT (year_val + 1) AS year_val, year_val AS orig_year_val
FROM ( SELECT DISTINCT
TO_CHAR (batch_create_dt, 'YYYY') year_val
FROM stores_comm_mob_sub_temp
ORDER BY 1)
ORDER BY year_val)
LOOP
lv_partition_name :=
scmsa_handset_mobility_data_build.fn_get_partition_name (
p_table_name => 'STORES_COMM_MOB_SUB_INFO',
p_search_string => m1.year_val);
FOR m2
IN (SELECT DISTINCT
'M' || TO_CHAR (batch_create_dt, 'MM') AS month_val
FROM stores_comm_mob_sub_temp
WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val)
LOOP
lv_subpartition_name :=
scmsa_handset_mobility_data_build.fn_get_subpartition_name (
p_table_name => 'STORES_COMM_MOB_SUB_INFO',
p_partition_name => lv_partition_name,
p_search_string => m2.month_val);
                    DBMS_OUTPUT.PUT_LINE('The lv_subpartition_name => '||lv_subpartition_name||' and lv_partition_name=> '||lv_partition_name);
IF lv_subpartition_name IS NULL
THEN
                         DBMS_OUTPUT.PUT_LINE('INSIDE IF => '||m2.month_val);
INSERT INTO STORES_COMM_MOB_SUB_INFO T1 (
t1.ntlogin,
t1.first_name,
t1.last_name,
t1.job_title,
t1.store_id,
t1.batch_create_dt)
SELECT t2.ntlogin,
t2.first_name,
t2.last_name,
t2.job_title,
t2.store_id,
t2.batch_create_dt
FROM stores_comm_mob_sub_temp t2
WHERE TO_CHAR (batch_create_dt, 'YYYY') = m1.orig_year_val
AND 'M' || TO_CHAR (batch_create_dt, 'MM') =
m2.month_val;
ELSIF lv_subpartition_name IS NOT NULL
THEN
                    DBMS_OUTPUT.PUT_LINE('INSIDE ELSIF => '||m2.month_val);
MERGE INTO (SELECT *
FROM stores_comm_mob_sub_info
SUBPARTITION (lv_subpartition_name)) T1 --> Issue Here
USING (SELECT *
FROM stores_comm_mob_sub_temp
WHERE TO_CHAR (batch_create_dt, 'YYYY') =
m1.orig_year_val
AND 'M' || TO_CHAR (batch_create_dt, 'MM') =
m2.month_val) T2
ON (T1.store_id = T2.store_id
AND T1.ntlogin = T2.ntlogin)
WHEN MATCHED
THEN
UPDATE SET
t1.postpaid_totalqty =
(NVL (t1.postpaid_totalqty, 0)
+ NVL (t2.postpaid_totalqty, 0)),
t1.sales_transaction_dt =
GREATEST (
NVL (t1.sales_transaction_dt,
t2.sales_transaction_dt),
NVL (t2.sales_transaction_dt,
t1.sales_transaction_dt)),
t1.batch_create_dt =
GREATEST (
NVL (t1.batch_create_dt, t2.batch_create_dt),
NVL (t2.batch_create_dt, t1.batch_create_dt))
WHEN NOT MATCHED
THEN
INSERT (t1.ntlogin,
t1.first_name,
t1.last_name,
t1.job_title,
t1.store_id,
t1.batch_create_dt)
VALUES (t2.ntlogin,
t2.first_name,
t2.last_name,
t2.job_title,
t2.store_id,
t2.batch_create_dt);
END IF;
END LOOP;
END LOOP;
COMMIT;
end;
Much appreciate your inputs here.
Thanks,
MK.
(SORRY TO POST THE SAME QUESTION TWICE).
Edited by: Maddy on May 23, 2013 10:20 PM

Duplicate question

Issue in using presentation variable as filter condition in the reports

Hi,
I have an issue in using presentation variable as filter condition in my reports the details are as follows:
Details :
We want to implement the Max and Min variables through Presentation variables only.we do not want to implement it through session variables in this case.
We have two variables MIN and MAX to be used as Presentation Variables,for a column of the report (which is a quantity),so that the user wants to see the data for this column within a particular range.i.e the Min and the Max.This part has been implemented well . The issue is when the user wants to see the full data.In that case we will not pass any values to these two Presentation Variable or in other words we are not restricting the report data so we are not passing any value to the variables,this is when the report is throwing the error. we want to leave this variables blank in that case.but this is giving error.
Please suggest how can I overcome this issue.
Thanks in Advance.
Regards,
Praveen

i think you have to use guided navigation for this. create two reports first is the one you are having currently and second is the one in which remove the presentation variable from the column formula. i.e. the same report with no aggregation applied.
Now create a dummy report and make it return value only when the presentation variable value is not equal to max or min. guide the report to navigate between the first and second report based on the result of the dummy report.

Any issues with using LDAP on LINUX for GRC 5.2 UME?

Our company is converting our LDAP servers from AIX to LINUX. The DNS name used in our UME connection should not change. Are there any issues with using LDAP on LINUX? We are currently on GRC 5.2 SP9 (in the middle of upgrading to SP12).
Also, I have been trying to connect our test UME system to a test LDAP box that has already been converted to LINUX but keep getting a 'connection failed' error when I try to test it.
Do you have to reboot the server to test changing the LDAP connections? I've been trying it by going into UME, pulling up the LDAP tab, hitting the Modify button, entering the new userid and password for test LDAP, and hitting the Test Connection button. I've verified that this userid and password is correct for test LDAP.
Is there a way to get more information about why the connection failed?
Thanks.

I've been told by our LDAP Support group that none of the other configuration settings should have to be changed. I should only have to change the id and password to connect to a test version of LDAP instead of our regular connection to the production LDAP.
Can you test a connection for a different userid/password without having to reboot/restart the server? Do I need to change these two settings, save then, reboot/restart, and then do the Test Connection button?
Thanks.

Issues with using relative links in Captivate 8

Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc. We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS. SO we can't put in full paths for the links or we'd have to change them constantly. So an example is that the link for a button might be "../Document/nameofdoc.pdf" This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well. Any suggestions?

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

Issues with using the output redirection character with newer NXOS versions?

Has anyone seen any issues with using the output redirection character with newer NXOS versions?
Am receiving "Error 0x40870004 while copying."
Simply copying a file from bootflash to tftp is ok.
This occurs for both 3CDaemon and Tftpd32 softwares.
Have tried it on multiple switches - same issue.
Any known bugs?
thanks!
The following is an example of bad (NXOS4.1.1b) and good (SANOS3.2.1a)
MDS2# sho ver | inc system
system:    version 4.1(1b)
system image file is:    bootflash:///m9200-s2ek9-mz.4.1.1b.bin
system compile time:     10/7/2008 13:00:00 [10/11/2008 09:52:55]
MDS2# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
TFTP put operation failed:Access violation
Error 0x40870004 while copying tftp://10.73.54.194/
MDS2# copy bootflash:cpu_logfile tftp://10.73.54.194
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
|
TFTP put operation was successful
MDS2#
ck-ci9216-001# sho ver | inc system
system:    version 3.2(1a)
system image file is:    bootflash:/m9200-ek9-mz.3.2.1a.bin
system compile time:     9/25/2007 18:00:00 [10/06/2007 06:46:51]
ck-ci9216-001# sh int br > tftp://10.73.54.194
Trying to connect to tftp server......
|
TFTP put operation was successful

Please check with new version of TFTPD 32 server. The error may be due to older version of TFPT server, the new version available solved this error. Files are getting uploaded with no issues.
1. Download tftpd32b.zip from:
http://tftpd32.jounin.net/tftpd32_download.html
2. Copy the tftpd32b.zip file into an empty directory and extract it.
3. Copy the file you want to transver into the directory containing tftpd32.exe.
4. Run tftpd32.exe from that directory. The "Base Directory" field should show the path to the directory containing the file you want to transfer.
At this point, the tftpserver is ready to begin serving files. As devices request files, the main tftpd32 window will log the requests.
Best Regards...

Issue with use of Function Module GUI_UPLOAD

Hi Experts,
I have an issue in using the Function Module GUI_UPLOAD for uploading the contents of an Excel file on the Presentation Server to an internal table in an ABAP Program.
My file consists of around 300 records but the FM succeeds in uploading only the first 6 lines to the Internal Table specified while calling the FM.
I dont have any idea why this happens. Any pointers in this direction will be helpful.
Thanks in advance.
Regards,
Keerthi

Hi,
Kindly go through this link below:
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=60655105
Hope it helps you
Regards
Mansi

HR ABAP: Issue with using 'nocommit' parameter on FM HR_INFOTYPE_OPERATION

Issue with using nocommit parameter on FM HR_INFOTYPE_OPERATION:
My client has a requirement to create the following 4 infotypes in sequence in a LUW, i.e either all are created or none is created.
9045 (custom infotype)
0045
0078
0015
I tried to use the nocommit parameter on FM HR_INFOTYPE_OPERATION to insert the 4 infotypes
in a nocoomit mode and then at the end I have issued
'Commit Work', but to my surprise only I/T 0015 is created in the database and the first three (9045, 0045 and 0078) did not make it to database.
I searched many threads on SDN but could not find a solution.
Please let me know if there could be any solution to implement the LUW.
YOur inputs will be appreciated.

Hi ,
i think u can also try with this FM HR_MAINTAIN_MASTERDATA , see its documentations.
no commit works like a simulation mode , what u can do is ,
call FM for all Infotypes and collect all error msgs if any , then finally call FM for all infotypes again without passing nocommit work ( i.e space).
regards
prabhu

I CAN'T GET MY BRUSH IN PHOTOSHOP ELEMENTS 13 TO CHANGE FROM A PLUS SIGN WITH A CIRCLE IN THE MIDDLE. I WANT TO USE A ROUND BRUSH.

I CAN'T GET MY BRUSH IN PHOTOSHOP ELEMENTS EDITOR TO CHANGE FROM A PLUS SIGN WITH A CIRCLE IN THE MIDDLE. I WANT TO USE A ROUND BRUSH.

You have the caps lock on

JTable text alignment issues when using JPanel as custom TableCellRenderer

Hi there,
I'm having some difficulty with text alignment/border issues when using a custom TableCellRenderer. I'm using a JPanel with GroupLayout (although I've also tried others like FlowLayout), and I can't seem to get label text within the JPanel to align properly with the other cells in the table. The text inside my 'panel' cell is shifted downward. If I use the code from the DefaultTableCellRenderer to set the border when the cell receives focus, the problem gets worse as the text shifts when the new border is applied to the panel upon cell selection. Here's an SSCCE to demonstrate:
import java.awt.Color;
import java.awt.Component;
import java.awt.EventQueue;
import javax.swing.GroupLayout;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTable;
import javax.swing.border.Border;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
import sun.swing.DefaultLookup;
public class TableCellPanelTest extends JFrame {
private class PanelRenderer extends JPanel implements TableCellRenderer {
    private JLabel label = new JLabel();
    public PanelRenderer() {
      GroupLayout layout = new GroupLayout(this);
      layout.setHorizontalGroup(layout.createParallelGroup().addComponent(label));
      layout.setVerticalGroup(layout.createParallelGroup().addComponent(label));
      setLayout(layout);
    public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
      if (isSelected) {
        setBackground(table.getSelectionBackground());
      } else {
        setBackground(table.getBackground());
      // Border section taken from DefaultTableCellRenderer
      if (hasFocus) {
        Border border = null;
        if (isSelected) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusSelectedCellHighlightBorder");
        if (border == null) {
          border = DefaultLookup.getBorder(this, ui, "Table.focusCellHighlightBorder");
        setBorder(border);
        if (!isSelected && table.isCellEditable(row, column)) {
          Color col;
          col = DefaultLookup.getColor(this, ui, "Table.focusCellForeground");
          if (col != null) {
            super.setForeground(col);
          col = DefaultLookup.getColor(this, ui, "Table.focusCellBackground");
          if (col != null) {
            super.setBackground(col);
      } else {
        setBorder(null /*getNoFocusBorder()*/);
      // Set up our label
      label.setText(value.toString());
      label.setFont(table.getFont());
      return this;
public TableCellPanelTest() {
    JTable table = new JTable(new Integer[][]{{1, 2, 3}, {4, 5, 6}}, new String[]{"A", "B", "C"});
    // set up a custom renderer on the first column
    TableColumn firstColumn = table.getColumnModel().getColumn(0);
    firstColumn.setCellRenderer(new PanelRenderer());
    getContentPane().add(table);
    pack();
public static void main(String[] args) {
    EventQueue.invokeLater(new Runnable() {
      public void run() {
        new TableCellPanelTest().setVisible(true);
}There are basically two problems:
1) When first run, the text in the custom renderer column is shifted downward slightly.
2) Once a cell in the column is selected, it shifts down even farther.
I'd really appreciate any help in figuring out what's up!
Thanks!

1) LayoutManagers need to take the border into account so the label is placed at (1,1) while labels just start at (0,0) of the cell rect. Also the layout manager tend not to shrink component below their minimum size. Setting the labels minimum size to (0,0) seems to get the same effect in your example. Doing the same for maximum size helps if you set the row height for the JTable larger. Easier might be to use BorderLayout which ignores min/max for center (and min/max height for west/east, etc).
2) DefaultTableCellRenderer uses a 1px border if the UI no focus border is null, you don't.
3) Include a setDefaultCloseOperation is a SSCCE please. I think I've got a hunderd test programs running now :P.

Is there a known issue for using IE11 when using business catalyst cms

Is there a known issue for using IE11 when using business catalyst cms? I have a client trying to update pages on her site using IE11 and the it says it updates successfully, but the new content is not saved.

I concur with Barry; I see no significant difference in using the Home button vs. the gestures. But the "fade" effect is part of iOS 7.1 and there's no way to disable it that I know of.
Regards.

Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine, but I have another machine with just "Reader" installed - is there als

Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine. I am looking for the cheapest solution to get the stuff running on another machine... is there any way to do that with the Acrobat SDK, or do I need to purchase a full version of Acrobat XI ($$) ?

The Acrobat SDK is nothing by itself. It is just information on how to automate Acrobat - just as the Office SDK doesn't include Office, but is for people who already have purchased Office but want to automate it.
These automation things are MARKETING TOOLS FOR ACROBAT. Consider this and the technical limitations make a lot more sense.
So, yes, you need to buy Acrobat. Standard is cheaper than Pro.

Issue in using xdofx:round fn

Similar Messages

Maybe you are looking for