Issue in WM enabled with HU (Transfer of stock frm Quality to Unrestricted)

Hi,
We've a scenario in such a way of both WM with HU engagged together.
Transfer of a Material from Quality to unrestricted stock type using transfer posting.
1. in MB1B using mvt 321, stock of Matl A with qty 20 has been transferd from Quality to unrestricted.
2. Due to HU mapped, an OBD for posting change had been created.
3. wrt OBD, matl get packed,(as per packing instruction) which is identified with the HU no.
4. Subsequently a TO had been created and confirmed.
as of this stage the stock view in IM & WM is as follows:
IM
Unres   -
    nil
Quality ---      20
Due to effect of PCN, TO has been created to transfer the stock catogry within the same bin
WM
Bin 1 (Q)    20      ---            922 (Q)       20
922          20     ---           Bin 1            20
5. Then as per the process of completion PGI has to occur so as to nullifying the the -ve stock in 922 storage type
so the stock levels will be
IM
Unres --- 20
Quality --- nil
WM
Bin 1              20
Issue case :
A mannual TO has been created moving the stock from Bin 1 to 922 , without doing step 5 (i.e w/o completion of PGI).
This lead my stock figs as
IM
Unres    -
nil
Quality -
20
WM
922(Q)              20
This also causes storage unit status as " To be Picked". leads to stuck up to proceed further.
We also tried to do mannual TO to transfer the stock from 922 to BIn 1. Due to unavailabilty of the stock system throws error as -ve stock is not possible for 922 Storage type..
Seeking experts to help out this issue if possibly w/o any customising settings.
Regards,
Prasanna
Edited by: prasanna govindarajan on Sep 22, 2010 2:55 PM

Dear Venkat,
There is a tick mark in post to inspection stock indicator thereafter inspection lot tab in qa32 or qa11 is not activated.
Secondly, this is a stock item.
Thirdly, No PS module is implemented in my client
I think the user has posted the stock through MB1C with Movt.Type 503 into quality stock.At the time of this posting the 05 inspection type is not activated in QM view of Material Master thatswhy system does not created any inspection lot for this.
After some days,with out stock posting from inspection stock to unrestricted stock,he has activated 05 inspection stock for the first time.
Pl.suggest any possible solution .
Prashant

Similar Messages

Transfer posting stocks from quality inspection to unrestricted, problem

Hello Guys,
kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
please advise me the correct way to settled this.
thanks and regards,

Hello Guys,
I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
Regards,

Transfer of Stock from Quality Insp. to Unrestricted

Hi SAP-PP/QM Experts,
I am doing complete inspection with UD for a particular inspection lot but my stock in Quality Inspection is not transfer to Unrestricted Used stock.I also tried Movt.Type 321 thereafter the stock can't moved.Pl.suggest me the usefull solutions.Helpfull solution will be awarded.
Prashant

Dear Venkat,
There is a tick mark in post to inspection stock indicator thereafter inspection lot tab in qa32 or qa11 is not activated.
Secondly, this is a stock item.
Thirdly, No PS module is implemented in my client
I think the user has posted the stock through MB1C with Movt.Type 503 into quality stock.At the time of this posting the 05 inspection type is not activated in QM view of Material Master thatswhy system does not created any inspection lot for this.
After some days,with out stock posting from inspection stock to unrestricted stock,he has activated 05 inspection stock for the first time.
Pl.suggest any possible solution .
Prashant

How to transfer special stock type ''O'' from unrestricted into blocked

Hello!
I would like to finD out if there is any movement type which would move sprecial stock ''O'' (provided for Vendor) from unrestricted to blocked? The stock should still belong to vendor afterthat.
We want to move the quantity of some batches into ststus blocked as we do not want them to be used (bad quality) - the are physicaly at vendor. We move this unavailable materials from vendor to our plant every 2-3 months and would need to have accurate information about unrestricted stock.
Many thanks in advance for your answer.

Hi ,
For the stock of material provided to vendors, the available stock types are unrestricted-use stock and stock in quality inspection. So you can NOT change the stock type to blocked.
I suggest you create a special storage location for this purpose.
Best regards,
CM

How to list the transfer posting document from quality to unrestricted

hi experts,
i can get GR documents by using MB51
but how to get list of documents from quality to unrestricted and blocked to quality tranferpostings
thank you
ganesh

You can get all the Details in MB51 by Selecting Proper Movement types.
For Eg: Gr Docs using 101, GR Blocked Using 103 and GR Blocked Released using 105 etc.
Regards,
Ashok

How to deal with Wire Transfer in BRS?

Hi,
we are facing a problem with wire transfer in BRS.
For cheque issues and receipts we have selected Algorithm 15 and in assignment field we gave cheque number for this no problem.
for wire transfer we dont get any number how to deal with it, please suggest us.
regards & thanks,
sashi kanth.

Hi
There is no possiblity of making your Process enabled Org as EAM enabled, and you must have to create a Discrete Org where in you can make this as EAM enabled.
In R12/11i Process Enabled items/inventory items are dealt with only process, and that is the reason we can maintain an Assest item to Process enabled org which is a constriant. Hence it is adviced that, create an Inv Org (Discrete) and Enable this for EAM.
Hope this is clear.
Regards
Raj
Sierra Atlantic

Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

Error while executing Initialize with Data Transfer for 0FI_GL_10

Hello All,
Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
The issue now is we are getting the following error message while running INIT with data transfer.
Job terminated in source system --> Request set to red
Message no. RSM078
We have copied the data till July 1st week of 2011.
Please advice. The issue is very critical.
Thanks & Regards
Sneha

Hi Arvind
Thanks for your inputs.
Please find below the details of the short dump.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          09/07/2011 11:25:32
Short text
     SQL error in the database when accessing a table.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
How to correct the error
     Database error text........: "ORA-01652: unable to extend temp segment by 128
      in tablespace PSAPTEMP"
     Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
     Please check the entries in the system log (Transaction SM21).
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
Information on where terminated
    Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
     "FETCH_TO_ISTRUCTURE".
    The main program was "SBIE0001 ".
    In the source code you have the termination point in line 903
    of the (Include) program "GP_GLX_FAGLFLEXT".
    The program "GP_GLX_FAGLFLEXT" was started as a background job.
    Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
    Job Initiator.. "BIWREMOTE"
    Job Number..... 11203300
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
    840 of the (Include program "GP_GLX_FAGLFLEXT ".

Tecra M10 - Stuck CTRL key issue -- perhaps to do with BIOS?

Hello and thanks for reading.
I recently switched my Tecra M10 to Windows 7 (from XP) and it soon developed the dreaded "stuck CTRL key" issue. This causes the keyboard to behave as if the CTRL key is permanently depressed. Sometimes hitting a combination of keys, or bringing up the onscreen keyboard, temporarily solves the issue, but then it returns.
It seems to be an issue many people have, with no simple solution. I've looked at every thread about it I can find, and tried many things to do with drivers etc. without any success.
So firstly, if anyone knows a remedy that works for this particular machine, I would be very grateful to learn it!
Then, there are two things I've not yet done: update BIOS and disable pinch zoom.
I was looking at the following BIOS update:
http://www.toshiba-asia.com/sg/support/drivers/details/25244
... which is version 3.00 and seems to be most recent. My own version is 1.90.
However version 3.00 is labelled "For PTMB0* ONLY". I don't know what this means or whether it applies to me. Can anyone help? Should I install this BIOS?
For the pinch zoom, I've been told that disabling it does sometimes cure the CTRL problem -- but I can't find any pinch zoom facility on the M10. I suspect it simply doesn't have one. Is that right?
Many thanks for any help you can give.

Hi
> I was looking at the following BIOS update. which is version 3.00 and seems to be most recent. My own version is 1.90.
There are different Tecra M10 models on the market.
Check the labels at the bottom of the unit. There you should find some numbers like for example PTMB0E-01K00LGR
The first 6 characters are important: for example PTMB0E
I assume your notebook belongs to European series.
In such case you should check the Toshiba EU driver page for possible BIOS update.
http://www.toshiba.eu/innovation/download_drivers_bios.jsp
However, on Toshiba EU driver page you will find also the BIOS v3.0 for all European Tecra M10 units.
Anyway, back to the CTRL button issue: guess what, you should connect an external USB keyboard and should check how the CTRL button acts.
In case the USB keyboard would work properly, the CTRL button of internal keyboard is affected and you will need to replace the internal keyboard.
PS: it could be possible that the option "sticky keys" has been enabled. To disable this function, you have to press SHIFT button 5 times in the row.

Av check disabled in issue order and enabled in delivery

Hi guys,
we are looking for a solution to deactivate the order av. check in the issue order and activate the av. check in the delivery at creation:
-requirement class : 0041 -> av. check enabled
-vov6 schedule line disabled
- delivery item category av check enabled.
with checking group 02 from material master (av. check active)
-> the av check happens at order level
with checking group Z. (no check) the av,. check happens only at time of goods issue
Does any one have any idea if this is not working for consignment process?
Thanks a lot in advance
Dominique

1) Check the reservations for the material in MD04. The available quantity might have been confirmed for earlier sale orders and hence reserved for those sale orders.
There are 11,000 cases in unrestricted stock. No reservations for the material.
2) Check the inhouse production time in MRP2 view of the material master. It should be filled with production lead time.
Done
3) In OVZ9, the checkbox "check w/o RLT" is unchecked.
This is our current setup
Net, issue is still there.

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

Purpose: to create photo galleries to insert or not items: 1) with phocagalery, it works 2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see noth

purpose: to create photo galleries to insert or not items:
1) with phocagalery, it works
2) with the transfer via lightroom, I do not see the downloaded files but if I want to create a directory folder with the same name, he said he is already, I see nothing in the media in content management
Can you help me

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you. If you need assistance,please reach out to us.
thanks,
Tonya D.

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am l

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am looking to be able to directly dial / email from this info in yet notes section located within a contact. On Blackberry, the notes area entered in a contact can connect directly but on the iPhone those numbers/emails are inactive. I am trying to avoid having to create each of these individuals as a separate contact and keep them under their account affiliation. It is easier to find them. This does not seem like that complicated of a request and hoping someone can tell me how or share an app that will enable the "notes" within a contact be "active". Hope this makes sense.

I seem to recall that this question has been asked before and I'm pretty sure that the answer is that you can't do what you want to do with the native contact app. However, there are lots of contact apps out there that pull from the built app's data but have other features. Perhaps one of them would meet your needs.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Initialize Delta Process with Data Transfer - Split the job in two/three

Hello,
I am trying to load master data into BI (DEV) and there are 700,000 master data records in my source system. When I tried to load Initialize Delta Process with data transfer, at some point (after 300,000 records) my load failed in source system and job log I found that this issue "ABAP/4 processor: TSV_TNEW_OCCURS_NO_ROLL_MEMORY"
When I informed this issue to BASIS consultant, they suggest me to split the job in 3 (Three). My question: how can I split the job in three? I can do one Initialize Delta Process load and followed by delta load.
Regards,
Md

Hi Md.
Even at Infopackage level you can reduce the number of records per package.
Go to Infopackage Schedular Menu -> DataS. Default Data Transfer. you can reduce the Maximum size of a data packet in kByte.
Regards,
Pratap Sone

Issue in WM enabled with HU (Transfer of stock frm Quality to Unrestricted)

Similar Messages

Maybe you are looking for