Issue in XSLT mappings in PI7.1

Dear all,
Problem Desc:
We have a scenario in PI 7.0 with XSLT mapping. It was working fine there. But when it was transported to PI 7.1, we are facing issues.
The issue is that, XSLT mapping with Java Enhancements is not working when we uncheck the SAP XML Toolkit option, in Operation Mapping.
The error statement says" The XSLT stylesheet could not be compiled".
Please note that, the Java Class being used in the XSLT mapping has been compiled with JAVA 1.5
Did any one encounter a similar error, If yes, please share your responses and help us in resolving the issue.
Regards,
Younus

The issue is that, XSLT mapping with Java Enhancements is not working when we uncheck the SAP XML Toolkit option, in Operation Mapping
Since the XSLT was working for PI7.0 and not working for PI7.1 you need to use SAP XML Toolkit option in your Operation Mapping.....not using this option results in faster execution of the XSLT mapping but then your XSLT mapping should be changed accordingly to work with JDK 5 if you intend not to use the toolkit option....for more information refer this help section:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/73/f61eea1741453eb8f794e150067930/content.htm
Regards,
Abhishek.

Similar Messages

Code Sample: Easy RFC Lookup From XSLT Mappings Using a Java Helper Class

Hi everyone,
This is just a shameless plug for my article: <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14">Easy RFC Lookup From XSLT Mappings Using a Java Helper Class</a>. I hope you're interested in reading it, and I welcome your comments in this thread.
Kind regards,
Thorsten

Hi Stefan. Thanks for your post. I have already done that. It still does not work. As a base for my java helper class I have usesd Thorstens code.
The problem is quite confusing. I will try to ouline both issues here.
First of all, when try to test from within the Operation Mapping, I always get a java error saying it cannot find the communication channel (it is there and working because I have tested it with the RFCLookup in graphical mapping). I have found a way to work around this, and that is to uncheck the "Use SAP XMLToolkit" checkbox --> switch to test tab, enter my ReceiverService in the parameter tab (header parameter) --> switch back to Definition tab, check the "Use SAP XMLToolkit" checkbox --> switch to Test tab and run the test. Then the XSLT and call to java helper class will work. Of course this is not really something you want to do all the time. Maybe there is a bug.
Secondly, it never works when I try to do it "live". I am using a file adapter to pick up one file, convert it and a file adapter to drop the converted file. I get the following error code in SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>ATJ_Accounting2XML_Accounting.xsl</SAP:P1>
<SAP:P2>http://rd.accounting.logica.com</SAP:P2>
<SAP:P3>fd552c30-bad9-11dd-9761-c21dac1b818c</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>TransformerConfigurationException triggered while loading XSLT mapping ATJ_Accounting2XML_Accounting.xsl; http://rd.accounting.logica.comfd552c30-bad9-11dd-9761-c21dac1b818c-1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Using an XSLT without a call to a java helper class, works just fine.
I am totally at a loss here. Any more input would be much appreciated.
/Patrik

Generating multiple target xmls from one source xml using xslt mappings

Hi,
I need to create more than one xml file from one source xml file using xslt mappings in file to file scenario.
Can you please let me know how this can be achieved.
Thanks,
Rajesh

Rajesh,
If you must use the XSL Transformation then you can find a nice simple example here. It's based on the Xalan XSLT Processor which to my knowledge is incorporated in PI7.1. I've not actually tried this but it makes for an interesting mapping case so please let us know the results:
[XSLT Split for multiple XML file output|http://abbeyworkshop.com/howto/xslt/xslt_split/index.html]
The XSL file will require a namespace addition:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:redirect="http://xml.apache.org/xalan/redirect" extension-element-prefixes="redirect" version="1.0">
The redirect prefix is used for the write tags in the XSL file.
The details cover the transformation of the source file:
1:<student_list>
   2:    <student id="1">
   3:        <name>George Washington</name>
   4:        <major>Politics</major>
   5:        <phone>312-123-4567</phone>
   6:        <email>gw_at_example.edu</email>
   7:    </student>
   8:    <student id="2">
   9:        <name>Janet Jones</name>
10:        <major>Undeclared</major>
11:        <phone>311-122-2233</phone>
12:        <email>janetj_at_example.edu</email>
13:    </student>
14:    <student id="3">
15:        <name>Joe Taylor</name>
16:        <major>Engineering</major>
17:        <phone>211-111-2333</phone>
18:        <email>joe_at_example.edu</email>
19:    </student>
20:</student_list>
Using this transformation:
2:<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
3:    xmlns:redirect="http://xml.apache.org/xalan/redirect"
4:    extension-element-prefixes="redirect"
5:    version="1.0"
6:>
7:<xsl:output method="xml"/>
8:
9:<xsl:template match="/">
10:    <xsl:apply-templates />
11:</xsl:template>
12:
13:<xsl:template match="student_list">
14:    <xsl:apply-templates />
15:</xsl:template>
16:
17:<xsl:template match="student">
18:    <xsl:variable name="filename" select="concat(@id,'.xml')" />
19:    <redirect:write select="$filename">
20:        <student id="{@id}">
21:            <xsl:apply-templates />
22:        </student>
23:    </redirect:write>
24:</xsl:template>
25:
26:<xsl:template match="name | major | phone | email">
27:    <xsl:copy-of select="." />
28:</xsl:template>
29:
30:</xsl:stylesheet>

MIAL RECIEVER CC -- ISSUE USED XSLT MAPPING

Hi All,
I have a Scenario in which IDOC is a sender and Mail Adaptert is reciever .The Xi is supposed to sent the Email notification to the client . Mail adapter is SMTP configured correctly ,Reciever Mail CC is up and running but Error is :Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.StringIndexOutOfBoundsException: String index out of range: 0
The Mapping here is used is XSLT mapping and in SXMB_MONITOR , Error shown is :
SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
Could you plesae help me this Issue asap .
Thanks,
Vara

Hi Abhi ,
I checked in ATOVA SPY XML Check , it seems to be the issue in XSLT mapping .
Part of XSLT mapping Error line:
when test="//IDOC/EDI_DC40/RCVLAD = '3157411730014'"> --There was a single qoute missing
Tested in Atova with payload , it worked
Thanks for your supprt as well.
Best Regards,
Vara

Can someone pleas tell me about abap, java and xslt mappings

Hi,
can someone please tell me about abap, java and xslt mappings.
Thanks,
Bernard.

HI,
JAVA mapping
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i /people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii /people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping /people/amol.joshi2/blog/2006/03/10/think-objects-when-creating-java-mappings /people/sameer.shadab/blog/2005/09/29/testing-abap-mapping sample code for java mapping blog=/pub/wlg/4143 tutorial sax and dom
ABAP mapping
ABAP mappings run on ABAP Stack and are developed in the ABAP workbench of the Integration Server.
You normally do not need to use the ABAP mappings and is preferable for someone with ABAP programming background. I should say JAVA functions would suffice any complex scenarios.
refer step by step guides for ABAP Mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
ABAP Mapping
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
https://websmp101.sap-ag.de/~sapdownload/011000358700003082332004E/HowToABAPMapping.pdf
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
/people/r.eijpe/blog
ABAP Mapping Vs Java Mapping.
Re: Message Mapping of type ABAP Class not being shown
Re: Performance of mappings (JAVA, XSLT, ABAP)
XSLT Mapping
XSLT stands for EXtensible Stylesheet Language Transformations. It is an XML based language for transforming XML documents into any other formats suitable for browser to display, on the basis of set of well-defined rules.
/people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/006aa890-0201-0010-1eb1-afc5cbae3f15
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=xslt+mapping&adv=false&sortby=cm_rnd_rankvalue#
Steps required for developing XSLT Mapping
u2022 Create a source data type and a target data type
u2022 Create Message types for the source and target data types.
u2022 Create Message Interfaces includes Inbound Message interface and Outbound Message interface.
u2022 XSLT Mapping does not require creation of Message mapping, so donu2019t create any Message mapping.
u2022 Create an .XSL file which converts source data type into target data type.
u2022 Zip that .xsl file and import it into Integration Repository under Imported Archives.
u2022 In Interface Mapping choose mapping program as XSL and specify this zip program. (Through search help you will get XSL Mapping programs that you imported under Imported Archives, select your corresponding XSL Program)
u2022 Test this mapping program by navigating to Test tab.
By having look at above steps you can easily find out that this mapping is no where different from other mapping programs, here the challenging lies in creating an XSLT file. If you spend couple of minutes in studying XPATH tutorial you would be in ideal position to create an XSL Transformation (.xsl extension).
If you still find difficulties in generating XSL Transformation, then you can make use of a tool u201CAltova MapForceu201D which will create XSL file for you.
Steps for creating XSL file using this tool:
1. Open the Alto MapForce, import the source .xml and .xsd file in it
2. Similarly import the target .xml and .xsd in MapForce.
3. These two data files should match with source and target data types in Integration Repository.
4. Complete the graphical mapping using extensive list of XSLT functions available there.
5. Save the mapping file.
6. Click the XSLT tab. You will have the entire xslt logic there.
7. Copy that content and save it as .xsl file.
8. Zip above .xsl file and import the same into IR under Imported Archives.
Hope this clears your doubts
Thanks
Saiyog

JAVA, XSLT, Mappings

Hi,
Can any one provide me the JAVA, XSLT Mappings with video demonstrations.
Regards,
Nissi

Hello
This thread is being locked by SDN moderator. Please familiarise yourself with the forum Rules of Engagement before posting on SDN. Please search the forum for existing answers before posting
Rules of Engagement
https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement
Regards
XI/PI Moderator

Literature of XSLT-Mappings

Hallo,
I want to change all message mappings in xslt-mappings.
So I search literature or a book (from sap) of these sap xslt-mappings.
Can anybody help me?
Thanks.
Regards
Stefan

Hi Stefan,
i suppose you speak german (your name).
My favorite side is the "Münz"-Side:
http://de.selfhtml.org/xml/darstellung/index.htm
some others:
http://www.xsl-xml.de/xslt.html#ErsteUebungen
http://www.oio.de/m/xslt-workshop/
http://www.xsl-rp.de/tiki-index.php
Regards,
Udo

Issue with XSLT Mapping

Hi Team,
I have one requirements which I am explaining below:
Source structure should be:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Student xmlns:ns0="urn:bp:xi:hr:edm:test:100">
   <Data>
      <FName>
      <LName>
      <Marks>                            Here Data fiels is 0......Unbounded.
                <Maths>
                <Science>
</ns0:MT_Student>
and Target structure must be like below:
<MT_Student_Result>
<Data>
      <Name>                         Here data field is 0......Unbounded.
      <Marks>
               <Total_Marks>
In the target structure Filed "Name" is obtained by concating "FName" and "LName" in the source structure
and the field "Total_Marks" is the sum of field "Maths" and "Science" in the source structure.
I have used XSLT mapping to obtain this.I have got the value of the "Name" field in the Target structure as required but I am not getting the value of the field "Total_Marks" in the target structure as required.Every time I am putting any value the result is comming as "NaN" as a value of the field "Total_Marks".Can you explain what is the issue?I am providing the code that I have done
<?xml version="1.0" encoding="UTF-8"?>
<xsl:transform version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" xmlns:fo="urn:bp:xi:hr:edm:test:100" xmlns:ns0="urn:bp:xi:hr:edm:test:100">
<xsl:template match="/">
<MT_Student_Result>
<xsl:for-each select="ns0:MT_Student/Data">
<xsl:variable name="name" select="FName"/>
<xsl:variable name="surname" select="LName"/>
<Data>
<Name>
<xsl:value-of select="concat($name,'',$surname)"/>
</Name>
<Marks>
<Total_Marks>
<xsl:variable name="maths" select="ns0:MT_Student/Data/Marks/Maths"/>
<xsl:variable name="science" select="ns0:MT_Student/Data/Marks/Science"/>
<xsl:value-of select="($maths+$science)" />
</Total_Marks>
</Marks>
</Data>
</xsl:for-each>
</MT_Student_Result>
</xsl:template>
</xsl:transform>
Edited by: ATANU1 on Mar 17, 2011 1:40 PM

Hei,
you have to add the namespace prefix to each element of the path (and of course: check out if the hierarchy is matching)
ns0:MT_Student/ns0:Data/ns0:Marks/ns0:Science
Regards,
Udo

Issue with XSLT For each loop in B2B Mapping

Hi All,
I am trying to map the inbound 997 Payload into Headers and Lines Table. I am using the For Each XSLT Construct to map the Loop AK2 of 997 into the 997 Lines Collection.
Issue I am facing is that if the Loop AK2 is repeated for 33 times then for all the 33 times only its first element's value is getting passed into the target of mapping file.
in coming payload
<Loop-AK2>
<Segment-AK2>
<Element-143>810</Element-143>
<Element-329>0001</Element-329>
</Segment-AK2>
<Segment-AK5>
<Element-717>A</Element-717>
</Segment-AK5>
</Loop-AK2>
<Loop-AK2>
<Segment-AK2>
<Element-143>810</Element-143>
<Element-329>0002</Element-329>
</Segment-AK2>
<Segment-AK5>
<Element-717>A</Element-717>
</Segment-AK5>
</Loop-AK2>
<Loop-AK2>
<Segment-AK2>
<Element-143>810</Element-143>
<Element-329>0003</Element-329>
</Segment-AK2>
<Segment-AK5>After transformation using XSLT file the payload looks like as follows
<ns0:XxmfiEdi997_AckLines>
<ns0:lineId>33</ns0:lineId>
<ns0:trxSetIdentCode>810</ns0:trxSetIdentCode>
<ns0:trxSetControlNumber>0001</ns0:trxSetControlNumber>
<ns0:segmentCode/>
<ns0:segmentPosition/>
<ns0:segmentError/>
<ns0:trxSetAckCode>A</ns0:trxSetAckCode>
</ns0:XxmfiEdi997_AckLines>
<ns0:XxmfiEdi997_AckLines>
<ns0:lineId>34</ns0:lineId>
<ns0:trxSetIdentCode>810</ns0:trxSetIdentCode>
<ns0:trxSetControlNumber>0001</ns0:trxSetControlNumber>
<ns0:segmentCode/>
<ns0:segmentPosition/>
<ns0:segmentError/>
<ns0:trxSetAckCode>A</ns0:trxSetAckCode>
</ns0:XxmfiEdi997_AckLines>
<ns0:XxmfiEdi997_AckLines>
<ns0:lineId>35</ns0:lineId>
<ns0:trxSetIdentCode>810</ns0:trxSetIdentCode>
<ns0:trxSetControlNumber>0001</ns0:trxSetControlNumber>
<ns0:segmentCode/>
<ns0:segmentPosition/>
<ns0:segmentError/>
<ns0:trxSetAckCode>A</ns0:trxSetAckCode>
</ns0:XxmfiEdi997_AckLines>
<ns0:XxmfiEdi997_AckLines>
<ns0:lineId>36</ns0:lineId>
<ns0:trxSetIdentCode>810</ns0:trxSetIdentCode>
<ns0:trxSetControlNumber>0001</ns0:trxSetControlNumber>
<ns0:segmentCode/>
<ns0:segmentPosition/>
<ns0:segmentError/>
<ns0:trxSetAckCode>A</ns0:trxSetAckCode>
</ns0:XxmfiEdi997_AckLines>
<ns0:XxmfiEdi997_AckLines>
<ns0:lineId>37</ns0:lineId>
<ns0:trxSetIdentCode>810</ns0:trxSetIdentCode>
<ns0:trxSetControlNumber>0001</ns0:trxSetControlNumber>
<ns0:segmentCode/>
<ns0:segmentPosition/>the Element-329 of incoming source payload is mapped to trxSetControlNumber of target payload, the issue is obvious from the above XML data that trxSetControlNumber is always having the value 0001 for every occurence where as its expected to fetch the value of the element of its corresponding occurence not the first elements value.
Please find below the xslt file code i used for mapping
<ns0:XxmfiEdi997_AckHeadersCollection>
      <ns0:XxmfiEdi997_AckHeaders>
        <ns0:headerId>
          <xsl:value-of select='oraext:sequence-next-val("XXMFI_EDI_997_ACK_HEADERS_S","jdbc/MTSI-apps")'/>
        </ns0:headerId>
        <ns0:processFlag>
          <xsl:text disable-output-escaping="no">I</xsl:text>
        </ns0:processFlag>
         <ns0:xxmfiEdi997_AckLinesCollection>
          <xsl:for-each select="/ns1:Transaction-997/ns1:Loop-AK2">
            <ns0:XxmfiEdi997_AckLines>
              <ns0:lineId>
                <xsl:value-of select='oraext:sequence-next-val("XXMFI_EDI_997_ACK_LINES_S","jdbc/MTSI-apps")'/>
              </ns0:lineId>
              <ns0:trxSetIdentCode>
                <xsl:value-of select="/ns1:Transaction-997/ns1:Loop-AK2/ns1:Segment-AK2/ns1:Element-143"/>
              </ns0:trxSetIdentCode>
              <ns0:trxSetControlNumber>
                <xsl:value-of select="ns1:Segment-AK2/ns1:Element-329"/>
              </ns0:trxSetControlNumber>
              <ns0:segmentError>
                <xsl:value-of select="/ns1:Transaction-997/ns1:Loop-AK2/ns1:Loop-AK3/ns1:Segment-AK3/ns1:Element-720"/>
              </ns0:segmentError>
              <ns0:trxSetAckCode>
                <xsl:value-of select="/ns1:Transaction-997/ns1:Loop-AK2/ns1:Segment-AK5/ns1:Element-717"/>
              </ns0:trxSetAckCode>
            </ns0:XxmfiEdi997_AckLines>
          </xsl:for-each>
        </ns0:xxmfiEdi997_AckLinesCollection>
      </ns0:XxmfiEdi997_AckHeaders>Is there something I am doing wrong in mapping or am I missing something here. Please suggest .
Thanks in advance
~TK.

Hi,
In your xslt code within the for loop, for the trxSetIdentCode why are you using the xpath "/ns1:Transaction-997/ns1:Loop-AK2/ns1:Segment-AK2/ns1:Element-143"? It should be just "ns1:Segment-AK2/ns1:Element-143". Similar changes for segmentError and trxSetAckCode also should be done. Remove the '/ns1:Transaction-997/ns1:Loop-AK2/' part from your xpath expressions inside the for loop and try it.
Sahay

Parameterized XSLT Mappings

Hello,
I'm trying to implement a Parameterized XSLT Mapping. But in the documention is a gap (see http://help.sap.com/saphelp_nwpi711/helpdata/en/43/bbb7fd90f5332ee10000000a11466f/frameset.htm). In Action 2 is written:
"When the XSLT mapping program is implemented, you access the mapping program parameters by accessing the get and set methods of the Java mapping API in the XSLT program (see also: XSLT Mapping with Java Enhancement, Parameterized Java Mappings)."
But when I follow the link of " XSLT Mapping with Java Enhancement " the example only shows the acces to the StreamTransformationConstants which do not contain the user parameters. How can I access the Importparameters, which I have defined in the binding in Operationmapping in my XSLT? Is ther a well working Java routine available, which could be called in the XSLT?
I have already working examples for pure ParameterizedJava Mapping and graphical Mapping but I'm missing this XSLT stuff
Kind regards
Manfred Schmidt-Voigt

Hi,
same findings here. We've followed the topic for a year too now, and chance has it that I've just spent 1,5 days trying to get this to work. The only reserved xsl parameter that is documented by SAP is the inputparam, which gives you access to the runtime constants, but not the parameters. With this parameter I've called a Java class (still according to the SAP Library), but I've not been able to reach the mapping parameters in memory.
I've 2 more options which I haven't the time now to explore:
- Call the XSLT from a Java mapping. We do have (well documented) access to mapping program parameters in a Java mapping
- Try to read the mapping program parameters from the InputAttachment, which is accessible through the StreamTransformationConstants.
I'm keeping an eye open on this one.. good luck !
kr,
Peter Glas

Issue with XSLT

Hi All,
I am working on a requirement to write an XSLT file which will do the following:
1. Copy contents from Input.xml to Output.xml
2. Read another xml file named Map.xml, select the value of printImmediate corresponding to Report Name and Version from Input.xml.
3. If printImmediate is true, then update the "VALUE" attribute of PRINT_IMMEDIATE element to 1, otherwise keep it same.
XSLT File
<xsl:stylesheet version="1.0"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns0="http://www.pwb.com/UBE"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
exclude-result-prefixes="xsi xsl ns0 xsd plt opaque tns wsdl xp20 bpws mhdr bpel2 oraext dvm hwf med ids bpm xdk xref pwb ora socket ldap">
<xsl:variable name="map" select='document("Map.xml")'/>
<xsl:template match="/">
<xsl:apply-templates mode="copy"/>
<xsl:copy-of select="*"/>
</xsl:template>
<xsl:template match="ns0:PRINT_IMMEDIATE" mode="copy">
<xsl:variable name="reportName" select="string(ancestor-or-self::ns0:ACTION/ns0:REPORT_NAME/@VALUE)"/>
<xsl:variable name="reportVersion" select="string(ancestor-or-self::ns0:ACTION/ns0:REPORT_VERSION/@VALUE)"/>
<xsl:variable name="printImmediate" select="$map/root/job[@report=$reportName and xp20:matches($reportVersion, @version)][1]/@printImmediate"/>
<xsl:attribute name="VALUE">
<xsl:choose>
<xsl:when test="string($printImmediate)">
<xsl:value-of select="1"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="."/>
</xsl:otherwise>
</xsl:choose>
</xsl:attribute>
</xsl:template>
</xsl:stylesheet>
Map.xml
<?xml version='1.0' encoding='UTF-8' ?>
<root>
<job report="R55" version="001" printImmediate="true" />
<job report="R56" version="001" printImmediate="true" />
<job report="R57" version="001" printImmediate="false" />
</root>
Input.xml
<?xml version='1.0' encoding='UTF-8' ?>
<REQUEST>
     <ACTION>
          <REPORT_NAME VALUE='R55'/>
          <REPORT_VERSION VALUE='001'/>
          <RUNTIME_OPTIONS>
               <ADVANCED_OPTIONS>
                    <PRINT_IMMEDIATE VALUE='0'/>
               </ADVANCED_OPTIONS>
          </RUNTIME_OPTIONS>
     </<ACTION>
</REQUEST>
My issue is that the xslt is not updating the PRINT_IMMEDIATE value to 1. Seems like the template is not working. Can you please help?
Thanks,
Maitrayee

Hi,
Only a guess but you could try without the prefix ?
I mean you search for "ns0:PRINT_IMMEDIATE", but seems like your input doesn't contain any prefix nor namespace.
regards,
mathieu

Using Java XML 1.5 toolkit instead of sapxmltoolkit for xslt mappings

Hi All
   We have a case whereby our xlst requires a number of customised java class functions as we are porting webmethods systems across to PI.
eg in the xslt adding
<xsl:when test="function-available('java:concat">
    <xsl:value-of select="java:concat($first, $last, $inputparam)"/>
We are running sap PI 7.1 ehp1. I have been referring to a number of posts on how to complete these tasks.
namely we have implemented the example as provided in:
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/73/f61eea1741453eb8f794e150067930/frameset.htm
This only works if "Sap XML Toolkit" is enabled in the operational mapping.
Left unticked (default setting in the mapping) whenever a testcase is run I end up with the error "could not compile sytle sheet".
I would like to use the Java 1.5 xml processing capability as it is supposed to perform better than the sapxmltoolkit option and support for the latter will be discontinued in future.
Has anyone been able run the case with sapxmltoolkit enabled?
If so did you add any other libraries for java xml 1.5?
thanks

Thanks, I would have thought as much, but theres no guide on the deployment.
For now i assume this will fit into the java/ext area and Pi would need a reboot after the libraries are copied.
Has anyone deployed the additional libraries to PI.

Issue with xslt transform

I'm having a problem with xslt transformations.
I'm sending a DOMDocument to be transformed into a varchar2. The transformation was into html and I was then printing the returning varchar2 to a web page, along the lines of...
htp.prn(Xslt.transform(domdoc, xslt.stylesheet( l_stylesheet_bfile)));
I subsequently broke the varchar2 32k limit so I started playing with transforming into a dom instead of a varchar, then writing the dom to a clob and the printing the clob to the web page in 32k chunks.
I noticed this produced different results than the first method. Now I'm assuming that this is not because xslt is doing the transformations differently but because it's trying to put my html into a well-formed DOMdocument. I have noticed, though, that things like & #160; seemed to have disappeared.
Just wondering if I'm doing something wrong, and also any reason why the transform functionality doesn't have an output option of CLOB?
Thanks
Jason

What is the DB version?

Documentation of using XSLT-Mappings

Hi,
does anybody know where I can find a documentation of a mapping with xslt??
Thanks for your help.
Regards
Stefan

Hi Stefan,
Everything has been said, but i though i would suggest an example for xslt mapping in sap xi,
Please refer "Generic XSLT Mapping for SAP XI,part 1 and 2" of the pdf.
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic xslt mapping in sap xi, part i.pdf
Also, you can refer an example in this weblog,
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Just thought of sharing these things,
Regards,
Anirban.

SAPXMLTOOLKIT Performance issue on XSLT conversion

Hi,
I am runnning a large XSLT transformation (source XML ~
16MB - relatively flat format record structure from a POS
system converting to IS Retail IDOC WPUBON IDOC -
around5MB of converted XML).
The aim is that this is portable bewteen SAP Business
Connector and SAP XI (both using the SAP XML TOOKIT). It
was looking good (around 80 seconds conversion time on my
laptop) and then I got a sapxmltoolkit.jar update (then I
tried it on SAP BC 4.7 then tracked it down to versions
of the sapxmltoolkit).
I then looked at the command line performance on this for
various different versions of sapxmltoolkit (used to be
command line from inqmyxml.jar) - we use xmlspy for XSLT
development and you can hook in a command line call to
use the library... sample call:
C:jdk1.3.1_15jrebinjava -ms384M -mx1024M -cp D:testingsapxmltoolkit.jar;
C:jdk1.3.1_15jrelibrt.jar;D:testingSCTmapping.jar
com.sap.engine.lib.xsl.xslt.CommandLine %1 %2 %3 %4
LOOKING AT THE PROPERTIES file from the jar file the
following version works well. Run time around 80 seconds
completing in 500M of memory
version=630.20030828104710.0000   GOOD
the next two versions I have work very badly - run time
greater than 10 minutes, system pages itself to death
uses all 1GB of java memory (and my laptop only has 1GB)
version=630.20050221090341.0000       BAD
version=630.20040429124817.0000       BAD
I see the latest version available still seems to be
stamped 630 (even in 640 netweaver shipment). Who
develops this... My samples to replicate this problem are
rather large... but happy to post them to site for
interested party
Even on a 140K sized sample XML the same ratio exists
goes from a few seconds to convert to minutes.... just on
a change in sapxmltoolkit versions
Regds Doug.
mailto:[email protected]

Thanks Alexander,
Have logged as message 0120025231 / 0000618401 / 2005
My short term fix is to run an IDE with known version of sapxmltoolkit (and invoke this separately) and avoid the built in sapxmltookit.jar...

Issue in XSLT mappings in PI7.1

Similar Messages

Maybe you are looking for