Issue Installing DPM 2012R2 UR2

I'm having issues installing the DPM 2012 R2 UR2 re-release and I wanted to share my experience. When I first attempted to install the update last week, it failed. Shame on me, I didn't make a backup of the DPM database before the upgrade and
DPM would not start after the attempted update install (DPM service wouldn't start.) Long story short, after about a day of troubleshooting, I gave up, did a complete reinstall and was able to retrieve a somewhat recent version of the database from tape.
I restored, synched that database and was back in business, but hadn't attempted the UR2 update again.
Fast-forward to today. Unfortunately, our server was set to automatically install updates, so the UR2 update tried to install itself last night. It failed, and the same problem occurred...DPM wouldn't start. This time, however, I found
a blog from a couple years ago mentioning very similar behavior to what I was experiencing (though not after an update). In their case, the SQL database had somehow gotten switched to Single User mode. On a whim I checked our database and indeed
it was set to "Single User" mode. I changed it to Multi-User and everything came back normally. I'm sure this was the case in my first upgrade attempt, but I never caught it.
I'm posting this in case anyone else happens to run into this issue. I have no idea why the database mode changed, but changing the database mode to Multi-User saved me a ton of time. Here's a link where I got the information:
http://www.sherr.co.uk/dpm-2012-fails-with-event-id-7034-the-dpm-service-has-terminated-unexpectedly-it-has-done-this-x-times/
Still need to do the UR2 update but obviously I'm gun shy.

Hi
RU3 is available now, why dont you try updating to that rollup?

Similar Messages

Cant silent install DPM using ini file.

Hello I am attempting to install DPM on a standalone server. I have a local sql server 2012 SP1 installed with all the prerequisites installed for both DPM and SQL. Significantly,
using the setup.exe I can install the DPM from the GUI no problem.
I am however having issues installing DPM via the command line using a silent install.
ini file as follows:
[OPTIONS]
UserName="<DOMAIN>\Administrator"
CompanyName="My Company"
ProductKey=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
command line:
start /wait setup.exe /i /f <path>\Dpmsetup.ini /l <path>\dpmlog.txt
With the silent install procedure however I hit an issue. I am convinced this is due to my INI file as I assume a requisite line must be missing as the install fails stating
that prerequisites are not met although. -However all the pre-reqs are met as reinforced by the sucesfull GUI install.
I have used the same Administrator account to run the install via the GUI (successfully) and Command line (unsuccessfully).
Said Administrator account has local admin rights and sql sysadmin rights.
One line I suspect I may need to add is #SqlAccountPassword. -I have attempted setting this with the password of the Administrator account. My understanding is
the 'yukon' lines are not applicable as the sql server is local.
Using the ini file does the install assume the sql install is remote? Any thoughts would be appreciated.
One error I found in error log using the command line 'DPM requires TCP/IP protocol' to be
enabled on the selected SQL server instance'. I've checked this however and again this is not applicable.

Hi,
The Yukon parameters are applicable even for a local SQL install. Below are the minimum parameters. See if that works for you.
[OPTIONS]
UserName = DOMAINNAME\USERNAME
CompanyName = MYCO
ProductKey = <The 25-character DPM product key in the format xxxxx-xxxxx-xxxxx-xxxxx-xxxxx>
SqlAccountPassword = PASSWORD
IntegratedInstallSource = DRIVELETTER:
YukonMachineName = SQL_SERVER_MACHINE_NAME
YukonInstanceName = SQL_INSTANCE_NAME
YukonMachineUserName = DOMAIN\USERNAME
YukonMachineDomainName = DOMAIN
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012R2 - Unable to install agent on trusted domain

Hi,
I'm pretty sure I'm not the first to ask this question, but couldn't find the solution anywhere.
Just completed the installation of DPM2012R2 and I'm trying to install\attach agents on the computers from the list.
Every single computer is returning me the same error: 322,
The following computers <computerame> were not found in Active Directory Domain Services, or they do not have a Windows Server operating system installed.
Which is weird since I'm logged in as domain admin and was able to access all the hosts under my active directory domain with no problem.
Any hints?

Hi,
Few things to try:-
1. Temporary disable Windows firewall between DPM and target server
2.Try add the credential that you use to push DPM agent to each local server-Local Administrator Group.
3.On DPM server server, make sure can resolve FQDN of the target server and able to ping them.
4.Next, depend on your target server, you may need to install some pre-requisite software/ update.
Refer to
Installing DPM Agent - http://technet.microsoft.com/en-us/library/hh758186.aspx
Pre-req to install:- http://www.ms4u.info/2013/02/unable-to-deploy-dpm-2012-sp1-agent-to.html
Lai (My blog:- http://www.ms4u.info)

Can I use the SCCM SQL Instance license to install DPM on a different machine.

Hello,
We have an instance of SCCM with the included SQL Server instance and I wanted to install DPM and link it to the same Db instance that we got with SCCM? Is the SQL Server licensed for all System Center products?

It's not really a matter of licensing in this case. The SQL server installation is not "Included with" Configuration Manager as a Primary or Central Administration site requires a full version of SQL Server. This link can give you a bit more info
on that
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigSQLDBconfig
Installing DPM and SCCM on the same SQL instance is possible, however, depending on how many clients you plan on supporting you may run into performance issues. To learn more about SQL server with System Center, there is a good guide here:http://gallery.technet.microsoft.com/SQL-Server-guide-for-8584c403
Thank you very much, that was the kind of info I was looking for.

Unable to backup file server with DPM 2012R2

Hello. I've got some strange problem file backing up a file service with DPM 2012R2.
File server - Windows 2012 R2
DPM server - Windows 2012 R2 with DPM 2012 R2
DPM storage - IBM DS3524
The backup lasts for about 11 hours, transfers about 1,7 TB (full file share size is about 11TB) and stops with event 104 ID (The parameter is incorrect (0x80070057)).
In DPM log I see:
05C0 1808 12/18 02:53:59.549 31 restoresubtask.cpp(226) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CRestoreSubTask::GetFinalStatus [0000000001F928D0]
05C0 1808 12/18 02:53:59.549 31 aasubtask.cpp(906) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING <?xml version="1.0"?>
79556B6BDB60 WARNING <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2147024809" Reason="Error" CommandID="RAWriteDataset" CommandInstanceID="bc2ba145-26ed-412e-8d10-ba20f9859fa2"
GuidWorkItem="edaff08a-7602-4b9b-b4b8-29f043dfb0fa" TETaskInstanceID="663a6cbb-158f-49c4-a3c3-79556b6bdb60"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="998" DetailedCode="-2147024809"
DetailedSource="2"/><RAStatus><RAWriteDataset xmlns="http://schemas.microsoft.com/2003/dls/ArchiveAgent/StatusMessages.xsd" BytesTransferred="1864495988736" NumberOfFilesTransferred="1095357" NumberOfFilesFailed="0"
DataCorruptionDetected="false"/></RAStatus></Status>
05C0 1808 12/18 02:53:59.549 03 runtime.cpp(1376) [00000000010549A0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 FATAL Subtask failure, sending status response XML=[<?xml version="1.0"?>
79556B6BDB60 FATAL <Status xmlns="http://schemas.microsoft.com/2003/dls/StatusMessages.xsd" StatusCode="-2147024809" Reason="Error" CommandID="RAWriteDataset" CommandInstanceID="bc2ba145-26ed-412e-8d10-ba20f9859fa2"
GuidWorkItem="edaff08a-7602-4b9b-b4b8-29f043dfb0fa" TETaskInstanceID="663a6cbb-158f-49c4-a3c3-79556b6bdb60"><ErrorInfo xmlns="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd" ErrorCode="998" DetailedCode="-2147024809"
DetailedSource="2"><Parameter Name="AgentTargetServer" Value="SPBSCM.polymetal.ru"/></ErrorInfo><RAStatus><RAWriteDataset xmlns="http://schemas.microsoft.com/2003/dls/ArchiveAgent/StatusMessages.xsd"
BytesTransferred="1864495988736" NumberOfFilesTransferred="1095357" NumberOfFilesFailed="0" DataCorruptionDetected="false"/></RAStatus></Status>
05C0 1808 12/18 02:53:59.549 03 runtime.cpp(1376) [00000000010549A0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 FATAL ]
05C0 1808 12/18 02:53:59.549 31 restoresubtask.cpp(833) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CRestoreSubTask::CleanUp [0000000001F928D0]
05C0 1808 12/18 02:53:59.549 31 restoresubtask.cpp(78) [0000000001F928D0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CRestoreSubTask: destructor [0000000001F928D0]
05C0 1808 12/18 02:53:59.549 18 dsmsubtaskbase.cpp(86) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 NORMAL CDsmSubTaskBase: destructor [0000000001F92CA0]
05C0 1808 12/18 02:53:59.549 18 mtfparser.cpp(322) [0000000002009480] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Data corruption near MTF DBLK at logical offset:1864495792128
05C0 1808 12/18 02:53:59.549 18 mtfreader.cpp(142) [0000000002009480] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : CMtfParser::GetNextDblkReader(pBuffer,
cb)
05C0 1808 12/18 02:53:59.549 18 mtfparser.cpp(246) [0000000002009480] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : HandleDblkParseFailure(const_cast<LPBYTE>(pBuffer+cbOffset),
cb-cbOffset, cbRead, fNewDblk, hr, &cbRead)
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtask.cpp(190) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : m_pMtfReader->Parse(pMsgBody,
cbSize)
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtaskbase.cpp(445) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : hr
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtaskbase.cpp(247) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : OnReadCompleted(dwNumberOfBytes,
pAgentOvl, dwError)
05C0 1808 12/18 02:53:59.549 18 dsmreceiversubtaskbase.cpp(198) [0000000001F92CA0] 663A6CBB-158F-49C4-A3C3-79556B6BDB60 WARNING Failed: Hr: = [0x80070057] : Encountered Failure: : lVal : ProcessWaitCompletion(dwNumberOfBytes,
pAgentOvl, dwError)
I've assigned the letter to the drive to which DPM was backing up, found the last file (the size was 0) and copied this file from the source without any problem.
This problem occurred several times with different storages for replica. Unfortunately previous logs went away so I cannot say that it stopped on the same file, but the error "Data corruption near MTF DBLK" was the same.
When the file server was on Windows 2008 R2 and DPM was 2012 SP1 there were no problems with backup.

Hi,
This is a known issue and is actively being investigated for a fix.
See the following thread:
http://social.technet.microsoft.com/Forums/en-US/b53b82b1-639b-4561-9ed2-f9749abd84f8/dpm-2012-r2-an-unexpected-error-occurred-while-the-job-was-running-id-104-details-the-parameter?forum=dpmfilebackup
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Issue installing System Update 5.01

Hello all I am having an issue installing System update 5.01. I looked in the logs within the temp directory and it says error 1602 which is user canceled. However, I am not canceling the install. I also tried http://support.microsoft.com/mats/Program_Install_and_Uninstall that didn't work either.
I'm on a T420 with Windows 7 64bit.
Any ideas?
Thanks for your time

I had similar issues installing 5.01. I believe there is something wrong with the package. Here is how I fixed it:
Download installer from http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE
Extract package with 7zip
Copy "Lenovo System Update.msi" to "System Update.msi"
Run setup.exe
For some reason the installer was looking for this file and it wasn't there, perhaps running the installer in silent/unattended mode caused it to exit with the code you mentioned.
I hope this fixes your problem too!

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Issue installing/upgrading to ITunes 10.6.1.7

Im having an Issue installing/upgrading to iTunes 10.6.1.7 When upgrading it would not istall and tell me to go to Tools>Download manual. I also had an issue with my IPod touch not showing up in iTuens all of a sudden. So figuring the two problems were related I uninstalled iTunes (cleaned my itues folder in my C drive also) with hopes installing it fresh would work and now when I install 10.6.1.7 I get the following in a pop-up window "The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified. Please run the installer again, or click Finish to exit."
Anyone know what the issue is?

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Having issues installing iTunes 11.1.4 for Windows 7 (64 bit).

Issues installing iTunes 11.1.4 for Windows 7 (64 bit).This install clobbered my previous version of iTunes. Error message is "service Apple Mobile Device failed to start". Cannot start the service manually even though I am the administrator of the machine. There is obviously some conflict that was recently introduced by a Windows update or in the Apple installation. I have tried removing iTunes and the AMDS (the Apple mobile device service) and reinstalling with the same error message.
Thanks for any suggestions you can provide!
Marilyn

Hey there Marylin,
It sounds like you are unable to start iTunes due to this error message even after uninstalling the iTunes application and the Apple Mobile device. I would recommend uninstalling not just those 2 applications but iTunes and ALL its associated applications with the following article:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Regards,
Sterling

Issue installing Photoshop Camera Raw 6.7

Hi guys,
I having issues installing Photoshop Camera Raw 6.7. I gt this error "Photoshop Camera Raw 6.7 Update Other processes are running which conflict with update installation. Please close them and try again. Error Code: U45M1P19". I restart the Computer (Windows 7) and closed all Adobe programs but the problem persist. Any ideas...
Thanks in advance!
P.S. I have Adobe Design Premium CS5.5

I have exactly the same issue and error number. The only difference is that I am running a Mac with OS X10.8.2
I also tried installing Camera Raw 7.1 and that did not work either.
I downloaded the Adobe Support manager and it reported everything as OK.
I have tried rebooting, turning off all apps. Nothing seems to fix this.
Any clues on what might be the problem and how to fix.
The reason I need the update is that I am using LR4 and want to edit in Photoshop CS 5.5 and it tells me I need to update my Camera raw.

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshoo

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW041 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s)
ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist. ------------------------------------------------------------------------------------- System Requirements and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

HT1926 iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

Many thanks.
Error 7 (Windows error 127)
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Issue: installed Adobe Reader XI, Norwegian version, existing pdf will not open or appear empty

I have uninstalled and reinstalled a number of times, but I still have the same issue. Adobe automatically gives me the Norwegian version as I live in Norway. When I open existing pdf files they appear empty, and automatically close themselves after a few seconds.
Any idea how I can solve this problem?
Your input is highly appreciated!
Thank you.
R

Thank you so much for your swift response, Pat! The first step – accepting the Eula license agreement solved my problem ☺ ☺ ☺
Wish you a great day – you just helped making mine a lot better!
Randi
Fra: Pat Willener [email protected]
Sendt: 27. august 2013 09:09
Til: Randi Hognestad
Emne: Issue: installed Adobe Reader XI, Norwegian version, existing pdf will not open or appear empty
Re: Issue: installed Adobe Reader XI, Norwegian version, existing pdf will not open or appear empty
created by Pat Willener<http://forums.adobe.com/people/pwillener> in Adobe Reader - View the full discussion<http://forums.adobe.com/message/5629375#5629375

Issue installing Client 9.2.0.1

Oracle rookie here having an issue installing Client 9.2.0.1....
I've installed the client software on a few machines without any issue. Now, I am installing it on the passive node of a cluster (cluster is running SQL Server 2000) and there is a problem. The install was successful once, until I noticed it installed under D:\oracle\ora92. I needed to install it on C, because that's where I installed it on the active node. However, when I run the installer (C:\9.2.0.1 Client\autorun\autorun.exe), it does not allow me to change the path or the name. If I change the Path to be be C:\oracle\ora92, the name (OraName92, in this case) goes away. If I retype OraName92 in the name box, the path goes back to D:\oracle\ora92.
I tried altering some ini files and that didn't work. I searched the registry and there are tons of references to the old install paths, but even changing some registry settings (specifically, HKLM\Software\Oracle\ORACLE_HOME and ORACLE_HOME_NAME) did not work. I didn't touch any other keys, but I did back up the registry.
Anyone have any thoughts on how I can get this installed on C? Thanks...
Peter

Just for giggles, I tried altering the following registry key:
HKLM\Software\Oracle\ALL_HOMES\ID0\Path
The value used to be D:\oracle\ora92, and I changed it to C:\oracle\ora92. When I start the installer program, it picks it up as the value for OraHome92. I have nothing to lose by trying this, but my only question would be, will the installer overwrite the existing keys in the registry? I'm hoping that's what it will do, because I don't want any stray references to D:\oracle\ora92 lying around.
If anyone knows anything about this, please let me know. Thanks for all your help!
Peter

Issues Installing Flash Player

I am having issues installing Flash Player 12 on IE11 running on Windows 7. Flash is enabled and it still doesn't work. Any suugestions would be greatly appreciated.

Maybe ActiveX Filtering is enabled? See http://forums.adobe.com/thread/867968

Issue Installing DPM 2012R2 UR2

Similar Messages

Maybe you are looking for