Issue installing NW2004s SP16 - common system files
Hello...
Can anyone kindly help me with my question here
Issue with common system files for Sneak Preview SAP NetWeaver 2004?
Thank you in advanced.
Don't need to post again...You need to wait till someone asnwer your question...Locking this thread....
Greetings,
Blag.
Similar Messages
-
Error phase Install Common system files SAP NW 7.1
Hello
I have a problem in my installation of SAP NW 7.1 for PI
I was installating the SAP NW but I stopped it and deleled this system (SID=TPI), then I started again the installation (SID=PI1) but in the phase Install Common System Files i got this message:
sapint_dev.log
CJSlibModule::writeInfo_impl()
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
CJSlibModule::writeInfo_impl()
File system node D:/usr/sap exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
CJSlibModule::writeInfo_impl()
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921 [ianxbservi.hpp:244]
CServiceHandle::Open(ClusSvc)
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR 2010-07-09 17:30:14.234 [sixxcstepexecute.cpp:984]
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING 2010-07-09 17:30:14.437 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2010-07-09 17:30:14.437 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO 2010-07-09 17:30:45.921 [sixxcstepexecute.cpp:1072]
An error occured and the user decided to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories".
INFO 2010-07-09 17:30:48.640 [synxccuren.cpp:1016]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS.
LOG sapint.log
INFO 2010-07-09 17:30:13.296
Execute step createFirstSystemDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0
INFO 2010-07-09 17:30:13.750
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
File system node D:/usr/sap exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR 2010-07-09 17:30:14.234
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING 2010-07-09 17:30:14.437
Could not get property IDs of the JavaScript object.
ERROR 2010-07-09 17:30:14.437
FJS-00010 Could not get value for property
I had found information about saploc however still I got the same
The installation is on Windows 2003 + Sql 2005
Any suggestion for this problem
Thanks
DannyHello
I deleted the system with the wizard on sapinst
NetWeaver Process Integration 7.1 Software Life-Cycle Options Uninstall Uninstall ‒ SAP systems or
single instances .
Danny
Edited by: Danny Sanchez on Jul 12, 2010 4:17 PM -
Issue with common system files for Sneak Preview SAP NetWeaver 2004
Hello,
I am trying to install Sneak Preview SAP NetWeaver 2004 and 7.0 - Full Java Edition with SAP NetWeaver Portal onto my machine.
On the third step of installation-- install common system files-- I am getting the some error messages and the installation was stopped. Can anyone kindly provide some assistance?
THANK YOU in advanced.
Errors:
INFO[E] 2007-09-10 00:18:17 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:18:18 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:18:18 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:18:18 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:23 [iaxxgenimp.cpp:779]
showDialog()
An error occured and the user decided to rety the current step: "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
INFO 2007-09-10 00:24:23
CJSlibModule::writeInfo_impl()
Setting ACL of registry entries for SAP system J2E...
INFO[E] 2007-09-10 00:24:32 [synxcuser.cpp:102]
CSyUserImpl::CSyUserImpl(const CUserData&, bool)
FSL-01027 Account user="X5DXB8C1\SAP_J2E_LocalAdmin" does not exist.
WARNING 2007-09-10 00:24:32 [ianxcreghelper.cpp:235]
CNTRegistryKey::SetACL(Registry: MACHINE\Software\SAP\J2E, ACL: (S-1-5-32-545, NONE, + | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-545, NONE, + | GENERIC_READ, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-547, NONE, + | DELETE | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE)(S-1-5-32-547, NONE, + | DELETE | GENERIC_READ | GENERIC_WRITE, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-32-544, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-32-544, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-18, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-5-18, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-2098403209-122039945-746205981-16905, NONE, +o | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)(S-1-3-0, NONE, + | GENERIC_ALL, CONTAINER_INHERIT_ACE | INHERIT_ONLY_ACE)(S-1-5-21-3505383784-3873561528-2797080325-1008, NONE, + | DELETE | KEY_ALL_ACCESS | KEY_CREATE_LINK | KEY_CREATE_SUB_KEY | KEY_ENUMERATE_SUB_KEYS | KEY_EXECUTE | KEY_NOTIFY | KEY_QUERY_VALUE | KEY_READ | KEY_SET_VALUE | KEY_WRITE | READ_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER, CONTAINER_INHERIT_ACE | OBJECT_INHERIT_ACE))
Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter (Error in setting security on 'MACHINE\Software\SAP\J2E' registry).
ERROR 2007-09-10 00:24:32 [ianxcreghelper.cpp:482]
CNTRegistryKey::GetStringHKeyClass(const HKEY& hKeyClass)
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32
CJSlibModule::writeError_impl()
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2007-09-10 00:24:32 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step setRegistrySecurity with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity was executed with status ERROR .
INFO 2007-09-10 00:24:46 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|setRegistrySecurity".
Exit status of child: 1I am not sure if this helps, but SAP_J2E_LocalAdmin exists in my system as a group not user.
-
Sapinstallation error in second step Install common system File.
Hi,
I am installing the SOLMAN on Linux RHEL5 and i am facing the error in second step Install common system File .
sapinst.log ERROR Logs ;
Output of /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh is written to the logfile installsapinit.sh.log.
WARNING 2011-08-15 09:56:21.770
Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.774
MUT-03011 Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.913
FCO-00011 The step installSAPInit with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_System|ind|ind|ind|ind|system|0|installSAPInit was executed with status ERROR ( Last error reported by the step: Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found).
Can any one please help me on this...Hello,
the "uname" command is part of the coreutils package on RHEL. Please check if the coreutils package is installed:
rpm -qa | grep -i coreutils
If the coreutils package is not installed you can install it with
yum install coreutils
Regards,
Frank -
Win XP Won't install, won't copy system files
I'm putting together an A64 system w/ a WD 36gb raptor on sata1.
I've done all of the things posted on this board (changed bios settings, used the floppies to install the sata drivers during windows setup). Everything is fine up until the xp setup is copying the setup files from the cd. It stops at every other file and says that it can't copy that file. Sometimes I can press enter and it will copy it on the second try but it always stops partway through and won't copy any more files. I've tried 2 different windows xp pro cds, and i know my cd rom drive doesn't have problems reading the files. This has only happened when I swapped out my WD 250gb ata drive for the sata raptor.
My power supplies (came with chieftec case from newegg) settings are as follows (as I've heard this may be a problem):
+3.3V = 22.0a, +5v = 36.0a, +12 = 18a
I'd love any suggestions. I've already flashed the bios to 1.2 and it doesn't seem to help. Thanks.I've taken one stick of ram out (it occured to me to do this just after i posted!), and it seems to be installing. I am still getting the "cannot copy file" errors, but if i have it retry a couple of times, it will usually go through. After that though, it still gives me "fatal errors" because it didn't copy all of the setup info onto the hd.
I was hesitant to put the system specs in my sig because i'm buidling this for someone else, but here they are:
A64 3200+
512 (1 stick) corsair twinx 3200LLPT DDR
WD 36gb raptor - connected to sata 1
plextor dd rom drive
floppy drive
and 2 case fans and the cpu heatsink/fan
Do you guys think that the power supply is the root of the problem as I've heard suggested? I thought this Chieftec rated at 450W would be enough. I will try and pick up a case with an Antec 380w PSU and try it out. I know that it's not a problem with the cd because i've used it to install on the same system, except it was on a WD 250gb ATA drive. Everything went fine on that installation. I've only been having this problem when trying to install on the raptor through sata. -
Issue installing System Update 5.01
Hello all I am having an issue installing System update 5.01. I looked in the logs within the temp directory and it says error 1602 which is user canceled. However, I am not canceling the install. I also tried http://support.microsoft.com/mats/Program_Install_and_Uninstall that didn't work either.
I'm on a T420 with Windows 7 64bit.
Any ideas?
Thanks for your timeI had similar issues installing 5.01. I believe there is something wrong with the package. Here is how I fixed it:
Download installer from http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE
Extract package with 7zip
Copy "Lenovo System Update.msi" to "System Update.msi"
Run setup.exe
For some reason the installer was looking for this file and it wasn't there, perhaps running the installer in silent/unattended mode caused it to exit with the code you mentioned.
I hope this fixes your problem too! -
Won't boot from install discs after deleting some system files
I've been looking through the forum and haven't found an answer to my problem - maybe someone can help me out.
I have an aluminum Powerbook G4, 1.67, 1.5 RAM, 10.4.11. I was experiencing the problem with FCE capturing video for about 5 minutes and then freezing, and I read some threads here about how this can be fixed by returning to Quicktime 7.2 and installing it with Pacifist. I did this, but first tried to delete my previous Quicktime version files, and obviously I deleted some system files in the process. That's how my new problem started.
Programs now that do not open - Preview, iTunes, iMovie, FCE, Yahoo, Mail, and Microsoft Messenger. I no longer have my date/time/battery level/airport/bluetooth indicators in my toolbar. The Spotlight icon flashes, but will not open. Also, when opening the System Preferences pane, it opens just for a second or two and then crashes and closes. Safari, airport, and Word all work, though, and I still can access internet.
I tried to re-install OS 10.4 from my black install disc. The computer reads the disc, but after I click the installer icon and then "restart," the computer fails to completely reboot. The disc spins in the drive, I get the Apple, the indicator, and then the screen goes to blue and the disc soon stops spinning. Nothing happens after that. I've tried rebooting by holding down the C key but the same happens. When I hold down the option key, I get to the point where I can choose to boot from the install disc, and then the same thing happens - the blue screen and nothing more. Booting with the shift key held down doesn't work either.
I did just have a repair by Apple - my adaptor plug sparked when inserting it into the outlet, and I had to have the logic board replaced. But the computer seemed to be working fine when I got it back, except for the FCE issue first mentioned. Looks like my good intentions have done me in.
The install disc is about three years old, and is in good condition. It's been in the garage, so could heat or cold affect the readability of the disc?
Does anyone have any suggestions on how I can boot from my install disc and get a fresh install of my OS?Hi bboross,
Tough without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(space between fsck and -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED *** Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more. -
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
Sol10 u8 installed on a ZFS Root File System have different swap needs?
Does Sol10 u8 installed on a ZFS Root File System have different swap needs/processes?
Information:
I've installed Solaris 10 (10/09 s10s_u8wos_08a SPARC, Assembled 16 September 2009) on a half dozen servers and every one of them no longer mount swap at boot.
The install program commented out the old swap entry and created this one:
# grep swap /etc/vfstab
swap - /tmp tmpfs - yes -
Everything works like a champ. I didn't discover the issue until I tried to install some patches and the install failed. It didn't fail because of lack of swap - it refused to run because it found "No swap devices configured".
Here are the symptoms:
# swap -s
total: 183216k bytes allocated + 23832k reserved = 207048k used, 13600032k available
# swap -l
No swap devices configured
# mount | grep swap
/etc/svc/volatile on swap read/write/setuid/devices/xattr/dev=5ac0001 on Mon Apr 19 08:06:45 2010
/tmp on swap read/write/setuid/devices/xattr/dev=5ac0002 on Mon Apr 19 08:07:40 2010
/var/run on swap read/write/setuid/devices/xattr/dev=5ac0003 on Mon Apr 19 08:07:40 2010
#Hi Nitabills,
I assume that you create a zfs entry for swap with the commande zfs create -V $size
did you launch the command :
swap -a /dev/zvol/dsdk/$ZPOOL/swap
Try this entry below in the vfstab :
/dev/zvol/dsdk/$ZPOOL/swap - - swap - no - -
System file corruption-alternatives to erase&install?
To make a long story short(er) I restored from (SuperDuper) backup after the HD failed and Apple gave me a new one. Then problems occurred with the system being slow (hesitating a lot) and having trouble connecting via wireless and finally not connecting at all, and then the machine ended up in "limbo" (according to the Mac Genius.) Now I've been told to erase and install, but I'm reluctant... There's a years worth of tweaks, updates, and installs on my MacBook! (After all, that's why I was so fervent about backing up...) And Boot Camp too.*)
Evidently "some" corrupt system files made their way into my backup before the old drive failed. (There was no warning; one day it was just gone.)
My question is, is there a way to figure out/diagnose which system files are corrupt and to replace only those? Or, alternatively, is there a way to "erase and install" only the system? Please forgive my "lack of Mac," I come from many years with Windows.
*)I'm assuming I can use Winclone to restore Windows (if I really have to erase the drive) once I repartition using Boot Camp. Um, all I have to do is remember how big I made that partition...I suggest that you start with an Archive and Install (checking the box to preserve settings). The last time I did this was in an upgrade from 10.2 to 10.3 on our little iMac G3, and after it finished, everything was just exactly the same as it had been under 10.2, except for one thing: those little pictures were gone by the users' names on the login screen (it was trivial to reconnect those pictures with the names). So I would try that, and see if your issues are fixed. If they are not, then there is another step you can take, which is to delete your preference files that are associated with the problem (i.e. wireless, airport). and if these things are not effective, then I would proceed with the full erase and install. I haven't done the Archive and Install with Tiger but I don't think it gives you a lot of options about what setting to save ... I think it's either all or none.
By the way, before doing any of these things, you should make at least one complete backup or clone of your entire disk.
Also, before doing Archive & Install or Erase & Install, create a new user and login as that user to see if the problem goes away. If it does, then there is not much point in doing a new system installation because the problem would have been pinpointed to your local user files/preferences, not the system-wide software.
I am not surprised that the Apple Genius suggested Erase/Install versus Archive/Install. The Erase/Install is guaranteed to fix any software issue, so the Genius won't need to deal with you in a follow up anymore. They have people lined up and want to just get you on your way, even though it might cause you a lot of work to recover all your settings and installed software (that's your time, not his). The Archive/Install is also highly likely to fix almost all software problems, but if it's something corrupted in your user settings, then it might not, in which case you'll be back and he'll have to deal with you. So he's suggesting killing a fly on a window with a sledgehammer, when maybe a flyswatter would work just as well (and cause less collateral damage to your house). I understand the motivations of a busy Apple Genius, but from your point of view, it would be better to try the other things before finally going to the erase and install.
Remember to do that backup before trying any of these things.
In general Macs do not need to have system software reinstalled. In fact I have never had to do it as a repair/diagnostic step on any of my machines using Mac OS X (except that one Archive and Install I did, but that was on a healthy system to go from 10.2 to 10.3). -
CLFS (Common Log File System)
Hi,
I am using windows CLFS, but I think I may have some bugs in its usage. I want to see if multiplexed logs have any benefit over dedicated logs when after each record write, the record is flushed into the disk. When I create multiplexed log files, the time
it takes to complete a flushed append, is below one mili second, which does not make sense. When creating a dedicated log file however, the write takes about 3 mili seconds. I wonder if this makes sense or if not what maybe the write way of forcing flushes.
Thanks.Hi Paris84,
Common Log File System supports dedicated logs and multiplexed logs. A dedicated log has a single stream of log records that is used by all of the log's clients. A multiplexed log (also called a common log) has several streams.
Here are the links for reference:
Dedicated CLFS Logs
http://msdn.microsoft.com/en-us/library/windows/hardware/ff542996(v=vs.85).aspx
Multiplexed CLFS Logs
http://msdn.microsoft.com/en-us/library/windows/hardware/ff556410(v=vs.85).aspx
To force the flush, there are two functions in the Common Log File System. They are FlushLogBuffers function and FlushLogToLsn function.
Here are the links for reference:
FlushLogBuffers function
http://msdn.microsoft.com/en-us/library/windows/desktop/bb540375(v=vs.85).aspx
FlushLogToLsn function
http://msdn.microsoft.com/en-us/library/windows/desktop/bb540376(v=vs.85).aspx
If you are developing an application and have any further issues in the future, you may need to post the issue in the MSDN forum.They are more professional in this area.
https://social.msdn.microsoft.com/Forums/en-US/home
Best regards -
How do I install a new system file to replace the damaged one
I am tring to repair the permissions on my computer and am getting all of these types of errors. Computer is dragging. I reinstalled my operating system and this is what is happening. Any suggestions. Happening on my desk top I Mac and on my Mac Book. I did google search and Error 23 is "These errors indicate that the Mac tried to access one of the standard routines in the system file and couldn't find it. In all probability, that means you have a corrupted system file. Try installing a new system file to replace the damaged one."
Here is a sample of what disk utilities says
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/cdesc-Con versions.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_format ted_s-i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_param- i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_query- i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_senten ce-i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_xml-i. yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/ExtractOptions
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/ExtractOptions/cdesc- ExtractOptions.yaml"
It says it should be done in 6 minutes and I am going on hours!
Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib"."
Any suggestions?I would apply or reapply the 10.6.8. Combo Update from Safe Boot (hold Shift down at startup -- give it much more time to boot than usual and leave it in SB for a few minutes before doing anything.)
http://support.apple.com/kb/dl1399
The messages you are seeing beginning with "Permissions differ on...." can be ignored. -
Hi guys,
Wenn I start to install NW2004s the System requires always a disc, namely "MIGRATION EXPORT JAVA". Where can I download it?
Thx.Hi,
you'll need at least XP Professional, as XP Home does not allow for different user groups than the predefined, and the installer creates additional groups, or fails, in case of XP Home
Regards,
Armin -
I had an issue running Bridge CS6 on my laptop yesterday and after failing to troubleshoot I un-installed it from my system but have yet to find any way to download/reinstall it. I have web design premium and tried uninstalling/reinstalling photoshop and illutsrator as I'd seen bridge was coupled with those but had no luck. Is it possible to download bridge as a stand alone with a web design premium license for cs6
restart your design premium installation, select custom install and you should see options to pick which programs you want to install.
tick bridge and install -
Commons Virtual File System
Commons VFS provides a single API for accessing various different file systems. It presents a uniform view of the files from various different sources, such as the files on local disk, on an HTTP server, or inside a Zip archive.
here is the link
http://commons.apache.org/vfs/index.html
Now i want to use this API please can any one give me links or suggest some books to explore this API
i need some tutorials (basics) for understanding this API.
Thanks in Advance.Roopesh_Saigaonkar
Don't multipost the same question. I've removed the thread you started in the Java Desktop Applications forum one minute after this one.
db
Maybe you are looking for
-
I didn't rename my iTunes library or anything. How can I sync with iTunes without erasing all my apps, app data and settings/messages etc on the iPhone/iPad?
-
SUGGESTION TO ADOBE: PLEASE CREATE A PROPER FORUM FOR SUBSCRIPTION AND BILLING ISSUES
I think and many will agree, that it is about time that Adobe would create a forum just for subscription or billing issues. There are so many people looking for help that taking this issues to a specific forum, would help in reducing the signal to no
-
Ldap sync failure with post process event handler
Hi All we are using OIM 11.1.1.5 and OID 11.1.1.5 and i have ldap sync. Now the issue, is i have two postprocess eventhandlers for diff functionality which will work in trusted recon and update few custom fields. Now when i do the trusted recon my ev
-
Set up Match and now redeemed account balance will not show up
I bought, installed and set up match to synch in the icloud. As soon as match was finished doing it's thing my redeemed itunes gift card balance disappeared from my account disabling my ability to purchase anything - it keeps prompting for a credit
-
My co-workers in another office all received new MacBooks and now their InCopy CS4 will not launch after the migration. Instead, it just crashes immediately ("has quit unexpectedly") whenever they try and launch. I have had them try and reset the pre