Issue installing Snow Leopard thru the Time Machine backup.

Might be a beginners Q, but I will ask because it's not being solved somehow.
I've tried installing the 10.6 Snow Leopard a few times but am confused. First time I installed without restoring the whole Mac HD from a backup few days ago (which I want to do because it is having trouble with my current Mac HD settings. I did this for the 2nd attempt)
When I did this, though I probably had every file there, I had major problems with my permissions(some files don't let me access says I have no permission) Also it was like the whole setting I had in 10.5.8 was gone.... What I thought is if I did a upgrade, everything will stay the same and all that will happen is it will become 10.6 snow leopard.
So next I restarted with inserting SL disk, and restarted the computer to install the SL and also restore my system from few days ago from time machine backup. This started and it did the restoration, and when everything is done, it is back to my 10.5.8 setting I want....but no 10.6 upgrade done(ie still 10.5.8) I am so confused. I did all this with my snow leopard disk but no upgrade happened!!
Am I missing some step? If someone can point out something that will be great.
Thank you,
n

Glenn Carter wrote:
First, what OS version were you running before you attempted the first restore? Approximately, what was the date and time of the last Time Machine backup before you attempted the first restore? That is the backup snapshot you want to aim for if you attempt another restore. However...
...have you permitted Time Machine to resume backups since the first restore attempt? If "No", then good. Do the following:
a. Wipe the drive again.
b. Install SL from the DVD (Do Not perform a "Restore..."), just a simple install of SL.
c. At the end, when given the opportunity to migrate your user accounts & apps from your Time Machine backup do it. If the most recent TM backups contained your most up-to-date user account, then it should migrate the most recent data & apps.
d. Then use Software Update to bring the system up-to-date.
If, however, you have permitted Time Machine to resume backups since your first restore attempt (described in your original post) then the user account you are after is no longer available for migration. You will need to do the following:
a. Using the SL DVD, perform a "Restore System form Backup...". Make sure you go back and pick the correct date and time that represented your user account before you performed the first restore (described in your original post). It should bring your system back to what it was before but only if you choose the correct date and time.
Any further questions?
Glenn Carter wrote:
First, what OS version were you running before you attempted the first restore? Approximately, what was the date and time of the last Time Machine backup before you attempted the first restore? That is the backup snapshot you want to aim for if you attempt another restore. However...
...have you permitted Time Machine to resume backups since the first restore attempt? If "No", then good. Do the following:
a. Wipe the drive again.
b. Install SL from the DVD (Do Not perform a "Restore..."), just a simple install of SL.
c. At the end, when given the opportunity to migrate your user accounts & apps from your Time Machine backup do it. If the most recent TM backups contained your most up-to-date user account, then it should migrate the most recent data & apps.
d. Then use Software Update to bring the system up-to-date.
If, however, you have permitted Time Machine to resume backups since your first restore attempt (described in your original post) then the user account you are after is no longer available for migration. You will need to do the following:
a. Using the SL DVD, perform a "Restore System form Backup...". Make sure you go back and pick the correct date and time that represented your user account before you performed the first restore (described in your original post). It should bring your system back to what it was before but only if you choose the correct date and time.
Any further questions?
<<<<First, what OS version were you running before you attempted the first restore?
It was 10.5.8
And the rest it was confusing and before I read your post I have gone to the apple store late afternoon today.
I explained the above and I was suspecting the permissions deal was causing the problem. What the mac guy did was went to some option to repair my user account permissions and everything worked out!!
When the guy did this I had the 10.6 system with lotta files having permission problems and also lotta small settings gone. But when repairing the user account permissions, all the settings came back and the os was 10.6!
Bottom line I think I screwed up account settings bad, and that was causing the problem.
thanks again glenn for all your help. If all goes wrong again, I will definitely follow some of the advice you mentioned here(^^)
cheers,
n

Similar Messages

  • Clean installed Snow Leopard, but Lion Time Machine backup was not recognized.

    I erased the Macintosh HD and clean installed the Snow Leopard. But when I try to use the Time machine backup to recovery my documents, the external hard disk can not even be recognized. It says "To use this disk, connect it to a Mac with Mac OS X v10.7 or later. The format of the disk was created using Lion which can not be read by Snow Leopard." The fact is that the format of the disk is Mac OS Extended (journaled) and was indeed created by Lion from windows format. So how can I read the disk using Snow Leopard? Thanks.

    I it a general problem, affecting e.g. a Mac with multiple partitions.  I get the same with trying to mount 10.7 from 10.6.8.
    Not ideal.  Hope a fix will be found. I'd suggest to report this to Apple.

  • Restore data (iTunes Library, Photo's, files etc.) to Snow Leopard from a Time Machine backup made on OSX Lion?

    Hi,
    I have OSX Lion and have been backing up to Time Machine, I now want to do a clean install of Snow Leopard (not from backup), but can I restore my data (iTunes Library, Photo's, files etc.) to Snow Leopard from a Time Machine backup made on OSX Lion?
    Thanks.

    You should be able to restore iTunes and iPhoto files if the Lion system was running the same version of those applications that you'll have on the Snow Leopard system.  However, you won't be able to restore files for applications like Mail, Address Book, or Safari, as the versions of those won't match.

  • I just hate Lion OS. Can I go back to snow leopard using my time machine backups?

    I just hate Lion OS. Can I go back to snow leopard using my time machine backups? it's a big mess... no more rosetta or Isync ot network usefulness for me... how do I go back to snow leopard using my time machine backups without losing the files i created after the "Lion upgrade"? I want to restore my whole Macbook, but fear to lose these recently created files, some help?

    mauijiminar
    Don't patronise him. This is Apples fault. Next time dont comment if you have nothing good to say!

  • Snow Leopard forgets my Time Machine backups

    I have just installed Snow Leopard on 4 machines and on each of them unless I keep selecting the time capsule backup folder from the preferences page it is only showing time machine backups from when Snow Leopard was installed. e.g. today.
    Any ideas?

    This has been reported by a few people.
    What some people found was if they opened TM and closed it then opened it a second time it sees the old backups. You could give this a try. Also try repairing permissions on the open sparsebundle. Make sure you make a copy first incase of problems.

  • Is it possible to reinstall Snow Leopard without a Time Machine backup?

    I have Lion but I absolutely loathe everything about it and want Snow Leopard back; I have my SL install disk but everything I've read says I'll need a Time Machine backup which I don't have. If I try to downgrade, will I lose all my programs and things? Is there a way around that at all?

    Unfortunately, Time Machine will not backup a NAS (e.g. AirDisk). AirDisk can be used as a TM backup drive as you have already discovered. The only way to backup the iTunes library on your HDD is to connected directly to your Mac. TM will be able to back up to your 1TB HDD connected to your Extreme. If you are dead set with keeping your iTunes connected to your Extreme, I believe CarbonCopyCloner (donateware) or SuperDuper! (purchase) may support backup of a NAS to a NAS.
    P.S. I've notified the moderator to remove your second post.

  • Does OS X Server 10.6 Snow Leopard support client Time-Machine backups

    Hello,
    Does OS X Server 10.6 Snow Leopard support multiple clients(20+) Time-Machine backups via LAN?
    Thanks,
    -Mike

    mausimo wrote:
    If the 20 users had 500GB hard drives and were planning on filling them, wouldn't i theoretically only need double the space to backup their computers?
    I'm not quite sure what you mean by this. If your 20 users had 500GB hard drives, then your total HD capacity would be 10,000GB, or 10TB. Double would be 20TB, which is more than I recommended. The 15TB (1.5 x the amount of data you would theoretically be backing up) would be plenty.
    That said, the DroboPro has a maximum of 16TB using currently available 2TB drives, so I would feel confident in recommending that to you. Realistically, your users probably aren't all going to fill their hard drives to capacity, so you might find you need even less.
    If I were you, I would look at how much data is on each hard drive right now, add it all up, multiply it by 1.5, then throw in an extra TB for good measure. I would only purchase enough drives to handle that capacity. As your users take up more space, you can order more drives and add them to the DroboPro.
    For example, if each user was using an average of 200GB currently, then for 20 machines you would have a total of 4,000GB, or 4TB. I would put 3x2TB drives in the DroboPro, giving you a total of 6TB (minus overhead) of backup capacity. From there, you can add more 2TB drives as you need them. This is almost identical to a system I manage for a client and it works very well.
    I hope this helps!

  • What's the best approach to migrate to Snow Leopard using the time machine?

    I have a time capsule, and have noticed the restore from backup option once I had to replace the HD on my MacBook Pro.
    I am about to buy a new MacBook Pro which will probably ship with Snow Leopard, and am wandering, if when I setup the new OS I can restore from a backup of my old system?
    Thanks
    Miguel

    don't use the full system restore from backup option with a new computer. that can only be used on the same exact computer. also, that option erases the destination drive and replaces it with the copy of the backed up system. this is not what you want.
    when you first turn on the new computer you'll get a setup assistant which will give you an option to Migrate your user data and applications from a TM backup. you can also do it later using Migration Assistant located in Applications/Utilities.

  • I have a 15" MacBook Pro with Mountain Lion installed.  I have partitioned the hard drive into two partitions.  Is it possible to install Snow Leopard on the second partition?  If so how do I do it?

    I have a 15" MacBook Pro with Mountain Lion installed.  I have partitioned the hard drive into two partitions.  Is it possible to install Snow Leopard on the second partition?  If so how do I do it?

    If your MacBook Pro had Snow Leopard on it at one time then sure. (Early 2011 or earlier)
    How to erase and install Snow Leopard 10.6
    Obviously choose the second partition to install into. It has to be OS X Extended journaled formatted in Disk Utility (BootCamp software makes it a MSDOS/FAT32 formatted partition if you used that to partition with)
    If it's a Early 2011 or Late 2011 that came with 10.7, it's possible, but it's not easy.
    https://discussions.apple.com/thread/3264421?start=0&tstart=0
    If you can't install Snow Leopard, there is a thread over at MacRumors how to run Snow Leopard in a virtual machine program under 10.7 or 10.8

  • How do i set up a new lion imac from a snow leopard imac using time machine?

    How do i set up a new lion imac from a snow leopard imac using time machine?

    Connect the two via Firewire cable - Transferring files between two computers using FireWire. Boot the old iMac into Target Disk Mode. Boot the new iMac normally.
    If you are starting the new iMac for the first time then do the above before you turn on the new iMac. After you turn on the new iMac you will begin in the Setup Assistant. When you complete the registration screens you will be offered an opportunity to migrate your data from another Mac. Follow the instructions to migrate your old Home folder, third-party applications and support files, and system preferences to the new iMac.
    If you have already gone through the Setup Assistant and created an initial admin user account, then you do the connection step but will use Migration Assistant in the Utilities folder of the new iMac.

  • I have an iMAC G5 PowerPC (not Intel) running10.5.8.  I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so.   Yet I can't install Snow Leopard as the G5 is not Intel.   What do I do?  How do I move music

    I have an iMAC G5 PowerPC (not Intel) running10.5.8.  I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so for my new iPhone 5S.     Yet I can't install Snow Leopard as the G5 is not Intel.   What do I do?  How do I move music and pics?  And keep them synced up as I purchase more? 

    Sorry, but that is correct. You need Snow Leopard to sync your phone and the latest version of iTunes and you old G5 cannot run that.

  • Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space?  Only one Sparse Bundle, same name.

    Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space?  There is only one sparse bundle but when I enter time machine I don't see my historic backups.  I use a synology DS212 for my time machine.  Started a new backup which is 218gb but it says 618 gb is occupied  therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014.  As you can see there is a second sparse bundle from 2012.  Not sure what that is.

    This is an old message now, but what happened to me similarly was:
    I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
    At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
    It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
    (I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
    My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
    But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
    As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
    BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
    I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
    Charles

  • Restore can't find the time machine backup

    I am trying to restore my system from a time machine backup and the Restore option doesn't recognize my time machine backup. Any ideas on how to force it to see it?
    Some background:
    I am running Mountain Lion on a 2008 iMac. About 1 week ago, my internal HD failed. I had the hard drive replaced and then hooked up my external HD time machine back-up to restore my system. I started the computer with the command-R option and selected restore from time machine backup. It recognized the hard drive itself, but when I get to the screen to select the backup, it tells me there are no backups on the selected volume. I have run the repair in Disk Utility and the drive checked out ok. I have since installed Mountain Lion again on the internal drive, but didn't bring any files.
    Also, while the main computer was down I connected the external drive to another computer and used the show hidden files steps to find some files on the time machine backup and copied them to the other computer.
    I don't know if this relates, but I want to share all of the info: Back when the HD originally failed, the computer froze. When my son restarted the computer, it then asked what language he wanted. Then it began a restore process and asked him to select a volume to restore the system to. This is the bad part- He selected a partitioned drive where I had stored some files that didn't fit on the hard drive. It erased that drive and began restoring the system. Of course he didn't tell me about any of this until about 2 hours later, so we lost the contents on that drive. This partitioned drive is the same drive where my time machine backup resides. One partition is the Time Machine backup and the other was external data.
    Any ideas? I know I can manually restore the files, but it would be nice to be able to automatically do it. Also, is there a way to read the excluded list? I found the file that this is on...
    Thanks,

    Inherit a Backup
    Inherit a Backup (2)

  • Issue trying to use old Mac Time Machine backup on new Mac

    I've just got a new iMac 27" to replace my old 21" and am planning to restore files from the Time Machine backup I have. On the iMac 21" I used an external hard-drive connected to an Airport Extreme Base Station to back up using Time Machine. On the new Mac the external drive is connected directly to the USB port. The old machine is now about 10,000 miles away from me.
    The issue I have is I cannot read the back-up from the old machine on the new.
    During the first startup I tried to read from the Time Machine backup but the system told me I could not use it because it was from a different machine - it read all the back-up dates and let me chose, but did not allow to use it.
    After startup was completed, I run a software update to make sure everything had the same version and tried Migration Assistant (with the HD still connected to the USB port), but the wheel keeps spinning not finding any disk.
    I can read the .sparsebundle file on the external drive and I see it is intact. Disk Utility recognizes it and Status is Not mounted. When I try to open it with Disk Utility it says it is not mountable.
    Any of you know how I can resolve this? I am thinking of a way of opening the file and reading it.
    I really just need my music, my movies and my pictures, but I have 1.2T of that so it is not something I can download from the old Mac.
    Thanks a lot in advance.

    I've just got a new iMac 27" to replace my old 21" and am planning to restore files from the Time Machine backup I have. On the iMac 21" I used an external hard-drive connected to an Airport Extreme Base Station to back up using Time Machine. On the new Mac the external drive is connected directly to the USB port. The old machine is now about 10,000 miles away from me.
    The issue I have is I cannot read the back-up from the old machine on the new.
    During the first startup I tried to read from the Time Machine backup but the system told me I could not use it because it was from a different machine - it read all the back-up dates and let me chose, but did not allow to use it.
    After startup was completed, I run a software update to make sure everything had the same version and tried Migration Assistant (with the HD still connected to the USB port), but the wheel keeps spinning not finding any disk.
    I can read the .sparsebundle file on the external drive and I see it is intact. Disk Utility recognizes it and Status is Not mounted. When I try to open it with Disk Utility it says it is not mountable.
    Any of you know how I can resolve this? I am thinking of a way of opening the file and reading it.
    I really just need my music, my movies and my pictures, but I have 1.2T of that so it is not something I can download from the old Mac.
    Thanks a lot in advance.

  • Restore using Time Machine to new hard drive, but last "full" backup was 2012.  how do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user?

    Restore using Time Machine to new hard drive, but last "full" backup was in 2012.  How do I restore the rest of the Time Machine backups, particularily IPHOTO libraries for each user? 
    I entered Iphoto for my user and only photo up until 2012 were in the library.  I thought the restore would do the incremental Time Machine backups too.....
    Running 10.8.2

    It usually means you are running Mavericks but have an earlier version of iPhoto. Open the App Store and upgrade your version of iPhoto to the Mavericks version.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
    iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

Maybe you are looking for

  • How do i get my contacts back after they've been deleted form iCloud

    How do I get my contacts back after they have been deleted on my phone from iCloud?

  • Having difficulties with installing Flash Player on Mac 10.5.8

    I am running Mac 10.5.8 with the most recent version of Firefox and am unable to install Adobe Flash Player. I have tried uninstalling the previous versions of flash and have even used the Adobe Flash Uninstaller tool for mac to make sure everything

  • Mdx rounding of values included in calculation

    Hello Experts We have a problem with decimals which result in very large figures for some calculations so therefor wan't to add a rounding like this but then we will only round the result, but we need to round the values included in the calculation:

  • KeyEvents are to KeyBindings as MouseEvents are to ???

    Hey, stupid question here. I've recently been told (on this forum, actually) that KeyEvents are the "old" way to handle keyboard input. The new way is to use KeyBindings and map Actions to the keys you want input from. That's all fine and good, and I

  • Error:Timeout for content=number 1000

    I am publishing a content area as a portlet on a page and I keep getting the above error. By hitting refresh several times in sucsession the Content eventually loads. Any ideas on what it could be that is causing this? This problem is driving me mad!