Issue installing SQL Server 2012(with SP1) on windows 7 Error result: -2067529718

When running the installation, it suddenly stops without any error popup.
I ran the installation from the command prompt and this is what I get:
An error occurred during the SQL Server 2012 Setup operation.
Error result: -2067529718
Result facility code: 1220
Result error code: 10
I recently uninstalled SQL Server 2012 SP1, because the SQL server service was not starting up, it would just hang in there with no response. I tried many things to get that issue fixed, finally I decided to uninstall and start fresh but I couldn't since
I was getting an error stating that I needed Windows 7 SP1(which was already installed). I downloaded the
microsoft fix it tool which fixed the issue.
On the control panel/Programs and features, I still see that SQL Server 2012 is listed if I click to uninstall again it tells me:
An error occurred while trying to uninstall Microsoft SQL Server 2012. it may have already been uninstalled. do you want to remove Microsoft SQL Server 2012 from the Programs and features list?
if I click yes, eventually it will be listed again.
currently I'm not able to install SQL server again and besides the info provided there are not error messages (I also copied the installation files to disk).
UPDATE: it appears that the sql server was not completely removed from the system, I still see listed the SQL server(SQLExpress) and server browser services on the SQL server configuration manager.
Thanks.

1) First Reboot your server and try again for the installation.
2) If first fail again than Take a backup of Registry first for safe side and then delete the entries of SQL server 2012 if found take a reboot again and try to install again.
One more thing if installation created any file then move/Delete that also before installation.

Similar Messages

SQL Server 2012 with SP1 on Windows 8.1 Pro

Can I install "out-of-the-box" SQL Server 2012 with Service Pack 1 Enterprise Edition or SQL Server 2012 Developer Edition on my Windows 8.1 VM?
Thanks.

Hello,
SQL Server 2012 SP1 is fully supported by Windows 8.1, and there is no need to install any SQL update for the installation.
Enterprise Edition is not supported on client operating systems like Windows 8.1 but setup won’t prevent you from installing.
Developer Edition is fully supported on client operating systems.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SP2 for SQL Server 2012 with SP1 is failed with Error result: -2067529723

SP2 for SQL Server 2012 with SP1 is failed when start the installtion from command prompt and thorws below errors in Passive node of the cluster.No other errors logged in eventviewer, temp folder and not created any log files in bootstarp folder.An error occurred during the SQL Server 2012 Setup operation.
Error result: -2067529723
Result facility code: 1220
Result error code: 5
For more information, review SQL Server 2012 Setup logs in your temp folder.It is not allowing to run the sql core setup to uninstall the cluster node and gives same error.Can any one got into the same issue and please help?ThanksPetchikumar

Hi,
Can you post summary.txt below link will help you locate it
https://msdn.microsoft.com/en-us/library/ms143702%28v=sql.110%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Errro while installing sql server 2012 express edition on Windows 8 -64 version

Hi,
Im trying to install sql server 2012 express edition on windows 8 machine(64 bit),however im getting same error every time.
The following error has occurred:
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337
i've googled and checked all prerequisite which is already installed.so not finding the reason behind this error.
it would be great if any one can help on resolving this error.
Thanks in advance
Regards
Ritesh

Hi ,
Thanks for help. here is the log summary text
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068051679
Start time: 2014-02-05 12:30:44
End time: 2014-02-05 12:36:21
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: IDEA-PC
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Database Engine Services
1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER SQL Server Replication
1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Management Tools - Basic 1033 Developer Edition
10.50.1600.1 No
SQL Server 2008 R2
Management Tools - Complete 1033 Developer Edition 10.50.1600.1
No
SQL Server 2008 R2
Client Tools Connectivity 1033 Developer Edition 10.50.1600.1
No
SQL Server 2008 R2
Client Tools Backwards Compatibility 1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Client Tools SDK 1033
Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Integration Services 1033 Developer Edition
10.50.1600.1 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\b33170cf028067db5b8335d2\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLFASHION
INSTANCENAME: SQLFASHION
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQL$SQLFASHION
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: idea-pc\lenovo
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Common Files
Component error code: 2337
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\sql_common_core_Cpu64_1.log
Error description: The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337.
Error help link:
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Common Files
Component error code: 2337
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\sql_common_core_Cpu64_1.log
Error description: The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337.
Error help link:
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\SystemConfigurationCheck_Report.htm

Installing SQL Server 2012 on a new VM - Error Code 0x858C0017

TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
Error code 0x858C0017.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&EvtType=0xFDC38F1F%25400x75B506EA%25401420%254023
BUTTONS:
OK
I am trying to create a new dev environment and I'm using VMware Player running Windows Server 2008R2 SP1. I am able to run through the setup checks but when I hit "Next" I receive the error above. Also, I am able to install this on my personal
computer - just not in my VM. Any way to solve this?
Thanks!
Edit: Just to clarify some things.
1) I am trying to install SQL Server 2012 Enterprise Edition.
2) I downloaded the .ISO file using my MSDN License and when I downloaded the file the text boxt next to it said that a product key was not required.
3) I went inside the setup directory and found the DefaultSetup.ini and there was a product key inside that has been confirmed by a rep to be a valid product key.

Hello,
Try using WinRAR to unzip the ISO file to a local drive and install from there. Please do not use WinZIP.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
I was also facing the same issue
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
The SQL Server product key is not valid. To proceed, re-enter the product key values from the Certificate of Authenticity (COA) or SQL Server packaging.
Error code 0x858C0017.
Earlier i used a different product to unzip the iso file.
Once i tried unzipping it using WINRAR, it worked. And installation went fine. Thanks Alberto

When installing DPM2012 R2 to a remote SQL Server 2012 R2 Sp1 produces an error 832

Sorry for bad english
Good afternoon trying to overcome the installation error 832
There are two virtual servers on ESXI
1. DPM on it trying to install itself DPM
2. SQL it should be a database DPM
SQL virtual machine on the net it was added component NetFW 3.5 put SQL Server 2012 SP1 EN-en. In the first plug SQL Data Base, Report Services, SQL Management studio from all services are running under a domain administrator
When you install SQL selected Server Collation "SQL_Latin1_General_CP1_Cl_AS"
Both hosts have Windows Server 2012 R2 En-en
DPM virtual machine clean, installed on it NetFW 3.5 and the component SQL Management studio, when you install DPM SQL Server validation errors not issued, at the end of the installation gives an error 832
Windows Server 2012 R2, SQL Server 2012 Sp1, DPM 2012 R2, all downloaded from a site microsoft
Visited rearrange SQL, rearrange Windows, put Ru-ru and En-en
Went to run the SQL from under Local system and other domain account
Where then subtracted that you want to create a domain / local recording Microsoft$DPM$ACC and run from under her service
did not help.
The only thing that bothers me more is that the domain name is XXX.YYY.local here where you need to read that domain would look like XXX.local but not sure that's true

Hi
Can you post the log file so we can see the error in more detail?

Installing Sql Server 2012 Enterprise edition on Windows 7

Hello,
I have a desktop with 1 TB Hard Disk and 8GB RAM. It has Windows 7 installed. I want this to be used as staging server at my work. I installed the SQL Server 2012 Enterprise edition. While installing I used service accounts as default when prompted
which I normally do while installing on a desktop. But now I want this to be used as a server where people can access this box as they do on a sql server machine .i.e. connect to server using SSMS and get to databases on the server and also remote
desktop into this machine. So, Is it fine to install with default service accounts?
Also how can I connect to this newly installed sql server box from another desktop using SSMS?
Thank You.

Hello,
Installation of SQL server 2012 Enterprise edition on Client machine(Win 7) is not supported( you can install ) .See below for Hardware and Software requirements for SQL Server 2012.You cannot claim support from Microsoft and I guess statging
is also important.
http://msdn.microsoft.com/en-us/library/ms143506.aspx
Now to your main question.To connect
Makes sure Browser service is running
Make sure you make exception in firewall for SQL Server services and incoming connections
Make sure you specify correct instance name when connecting from remote
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error Installing SQL Server 2012 Express LocalDB on Windows 8.1 64-bit

TriSys Business Software

Hello,
Did you install .NET Framework 4.0 or enable .NET Framework 3.5 SP1 on Windows 8.1 which is requirement for SQL Server 2012?
SQL Server installs .NET 4.0 during the feature installation step. But if you are installing the SQL Server Express editions, ensure that an Internet connection is available on the computer. SQL Server Setup downloads and installs the .NET Framework 4
because it is not included in the SQL Server Express media.
In you case, please try to download and install
.NET Framework 4.0 or
.NET Framework 3.5 SP1 and then run the SQL Server setup.exe again.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SQL Server 2012 Express SP1 will not install on Windows Server 2012 Essentials R2

I have been attempting to install SQL Server 2012 with SP1 Express Edition for about a two weeks and have been unsuccessful. My organization recently purchased a new Dell PowerEdge T320 Server (64 Bit) with Intel Xeon Proc.-E5-2420; 2.2Ghz, 32 Gb RAM,
1 Tb RAID 5 H/D, and Windows Server 2012 R2 Essentials (preinstalled). The server will be configured as an on premises server. We are running a small church management application that requires SQL Server 2012 SP1 Express. Per the direction
of our application vendor, we downloaded the SQL Server 2012 SP1 Express file (SQLEXPRADV_x64_ENU.exe) from the Microsoft SQL Server Website. We ran the file "As Administrator" and the SQL Server 2012 Setup program began.
We selected New SQL Server Stand-Alone Installation, successfully installed the needed Product Updates, and accepted the MS SQL Server 2013 Express License terms.
When the Feature Selection Page appeared we checked only the "Data Base Eng Services". The
Instance Configuration Page was displayed and we inserted a "Named Instance= Shelby",then pressed next. On the
Server Configuration Page the only change was setting the "sql server browser = automatic". The Database Engine Configuration Page appeared
and we inserted the following settings:1] Server Configuration Tab; a) mixed mode, b)inserted SQL Server Admin pswd, c) added current user as administrator: 2] Data Directories Tab; default/no changes: 3] User Instanced Tab; default/no
changes: and 4] Filestream Tab; default/no changes. Next the
Reporting Services Configuration Page came up and the reporting services native mode was set to
"install and configure". The Error Reporting Page appeared and was left as the
"default". The SQL Server 2012 Setup program proceeded to Installation Progress Page and started to install. Just before the install program ended it displayed a message saying that there
were errors and the Database Eng Services did not succeed. I uninstalled SQL Server 2012 SP1 Express three (3) times, ran Windows Update after every uninstall, attempted to install the Database Engine and got the same results. Are there any patches or
special procedures for correctly installing SQL Server 2012 SP1 Express on my hardware configuration or Windows Server 2012 Essentials R2? Any insight would be greatly appreciated.

Can you post the setup Summary and detail logs, which will help to figure out the problem? The details about the location can be found at https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Satish Kartan www.sqlfood.com

Unable to install SQL Server 2012 Standard: Error code 0x851A0019

Hi All,
I am trying to install sql server 2012 standard edition on windows server 2008R2 but at the end of the installation it is giving me the following error message:
"The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes."
And in the log file I got the following error message:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
(I have posted part of the log file)
Need your help to resolve this issue.
Thanks,
MKNayeem

Hi,
Thanks for your reply.
I have already followed that article. I have changed the user to local account user, but it did not work.
Like you said the sql server is installed, but it is not starting the services. Following is the error log file message:
2015-03-16 10:12:15.27 Server Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
2015-03-16 10:12:15.27 Server (c) Microsoft Corporation.
2015-03-16 10:12:15.27 Server All rights reserved.
2015-03-16 10:12:15.29 Server Server process ID is 5724.
2015-03-16 10:12:15.29 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2015-03-16 10:12:15.29 Server Authentication mode is MIXED.
2015-03-16 10:12:15.29 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG'.
2015-03-16 10:12:15.29 Server The service account is 'NT Service\MSSQL$BNG1SECISO'. This is an informational message; no user action is required.
2015-03-16 10:12:15.29 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\mastlog.ldf
2015-03-16 10:12:15.29 Server Command Line Startup Parameters:
-s "BNG1SECISO"
2015-03-16 10:12:15.57 Server SQL Server detected 2 sockets with 1 cores per socket and 1 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-16 10:12:15.57 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-16 10:12:15.57 Server Detected 16383 MB of RAM. This is an informational message; no user action is required.
2015-03-16 10:12:15.57 Server Using conventional memory in the memory manager.
2015-03-16 10:12:15.67 Server This instance of SQL Server last reported using a process ID of 2452 at 16-03-2015 07:03:13 (local) 16-03-2015 01:33:13 (UTC). This is an informational message only; no user action is required.
2015-03-16 10:12:15.67 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2015-03-16 10:12:15.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-16 10:12:15.69 Server Software Usage Metrics is disabled.
2015-03-16 10:12:15.70 spid6s Starting up database 'master'.
2015-03-16 10:12:15.78 Server CLR version v4.0.30319 loaded.
2015-03-16 10:12:15.82 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-16 10:12:17.36 spid6s Error: 824, Severity: 24, State: 2.
2015-03-16 10:12:17.36 spid6s SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:377; actual 261:2228225). It occurred during a read of page (1:377) in database ID 1 at offset 0x000000002f2000 in
file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and
must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Thanks
MKNayeem

Error while installing SQL Server 2012 Express Edition

Dear Experts,
My system configuration is,
Windows 7 Ultimate
32 bit
RAM 8 GB
I7 Processor
I am trying to installed Sql serve 2012 with tools version but not able to install.
Its giving me error Like Value can not be null..
I search every thing on google but not helps me.
Please assist.
Thanks,

Hello,
Try .NET Framework repair tool.
https://support.microsoft.com/kb/2698555?wa=wsignin1.0
Another possible solution can be found on the following URL.
http://sqlserver-help.com/2012/07/23/help-getting-error-value-cannot-be-null-while-opening-management-studio-which-value/
Please share with us the Summary.txt log file. Th following article may help you locate the file on disk.
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Make sure you have enabled .NET Framework 3.5 using Control Panel -> Programs and Features.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Installing SQL Server 2012 remotely via Powershell using Invoke-Command

I am trying to perform a SQL Server 2012 command line installation using Powershell Invoke-Command on Windows 2012 Datacenter.
The code I am using is as follows:
$ret = Invoke-Command -ComputerName $COMPUTER -ArgumentList $MEDIA,$ACTION,$FEATURES,$INSTALLDIR,$INSTANCEID,$INSTANCENAME,$SQLDATADRIVE,$SQLLOGDRIVE,$DOMAIN,$SQLSERVERSERVICEUSER,$SQLSERVICEPASSWORD,$PRODUCTKEY,$SQLSERVERSA,$username,$ADMINPASSWD
-Credential $cred -ScriptBlock {
  param($MEDIA,
     $ACTION,
     $FEATURES,
     $INSTALLDIR,
     $INSTANCEID,
     $INSTANCENAME,
     $SQLDATADRIVE,
     $SQLLOGDRIVE,
     $DOMAIN,
     $SQLSERVERSERVICEUSER,
     $SQLSERVICEPASSWORD,
     $PRODUCTKEY,
     $SQLSERVERSA,
     $USERNAME,
     $PASSWD)
  Set-Location $MEDIA
  Import-Module ServerManager
  if (-not [IO.Directory]::Exists($MEDIA)){
   $hn = hostname
   return 0,"Failed to find SQL Server Installer at $MEDIA on $hn"
  $tran = ""
  Try{
   & $MEDIA\setup.exe /ACTION=$ACTION /Q /FEATURES=$FEATURES /IACCEPTSQLSERVERLICENSETERMS /UPDATEENABLED=False /INSTALLSHAREDDIR="$INSTALLDIR\Program Files\Microsoft SQL Server" /INSTALLSHAREDWOWDIR="$INSTALLDIR\Program Files
(x86)\Microsoft SQL Server" /RSINSTALLMODE="FilesOnlyMode" /INSTANCEID="$INSTANCEID" /INSTANCENAME="$INSTANCENAME" /INSTANCEDIR="$INSTALLDIR\Program Files\Microsoft SQL Server" /ENU="True" /AGTSVCSTARTUPTYPE="Automatic"
/SQLSVCSTARTUPTYPE="Automatic" /NPENABLED=1 /TCPENABLED=1 /RSSVCStartupType="Automatic" /ERRORREPORTING=0 /SQMREPORTING=0 /INDICATEPROGRESS /INSTALLSQLDATADIR="$SQLDATADRIVE\DATA" /SQLUSERDBDIR="$SQLDATADRIVE\DATA" /SQLUSERDBLOGDIR="$SQLLOGDRIVE\LOG"
/ASDATADIR="$SQLDATADRIVE\OLAP\DATA" /ASLOGDIR="$SQLLOGDRIVE\OLAP\Log" \ASBACKUPDIR="$SQLDATADRIVE\OLAP\Backup" \ASTEMPDIR="$SQLDATADRIVE\OLAP\Temp" /ASCONFIGDIR="$SQLDATADRIVE\OLAP\Config" /ASCOLLATION="Latin1_General_CI_AS"
/SQLCOLLATION="SQL_Latin1_General_CP1_CS_AS" /SQLSVCACCOUNT="$DOMAIN\$SQLSERVERSERVICEUSER" /SQLSVCPASSWORD="$SQLSERVICEPASSWORD" /AGTSVCACCOUNT="$DOMAIN\$SQLSERVERSERVICEUSER" /AGTSVCPASSWORD="$SQLSERVICEPASSWORD"
/ASSVCACCOUNT="$DOMAIN\$SQLSERVERSERVICEUSER" /ASSVCPASSWORD="$SQLSERVICEPASSWORD" /RSSVCACCOUNT="$DOMAIN\$SQLSERVERSERVICEUSER" /RSSVCPASSWORD="$SQLSERVICEPASSWORD" /FTSVCACCOUNT="NT AUTHORITY\LOCAL SERVICE"
/INDICATEPROGRESS > $out
  } Catch [System.Exception] {
   return 0,$_.Exception.ToString()
  if ($tran -ne ""){
   $out += $tran
  return 1,$out
The media resides on the server that I am remoting to in powershell and the server is on the same domain. The credentials I pass are for a Domain Admin, but SQL Server fails to validate the credentials for the passed parameter for the sql service user with
a Access Denied.
If I run the same command with the same user directly on the server it works fine.
My guess is that the elavated privs for Administrator are not being set when using Invoke-Command? Is there a way to utilize powershell to install SQL Server 2012 with command line option using the invoke-command and passing credentials? Or is this a limitation
to the SQL Server installer. If there is can a example be provided?

Ok, so with the help of some friends, we found a fix that works!
Prior to running the Invoke-Command I now run:
# enable CredSSP on a client computer; this command allows the client credentials to be delegated to the server01 computer.:
Enable-WsManCredSSP -Role Client -DelefateComputer server.some.domain.com
Then I add the -Authentication option to my Invoke-Command with option Credssp.
The install the works fine. Hope this helpes all.

I get one or the other error when i install SQL server 2012 SP1 in my Lab server

I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htm

Sorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

Install SQL Server 2012 SP1 on a Windows Server 2012 R2 Failover Cluster - hangs at "Running discovery on remote machine" on VMWare VSphere 5.5 Update 1

Hi,I'm trying to install SQL Server 2012 SP1 on the first node of a Windows Server 2012 R2 failover cluster.The install hangs whilst displaying the "Please wait while Microsoft SQL Server 2012 Servce
Pack 1 Setup processes the current operation." message.The detail.txt log file shows as follows:(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached PID (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider
: NormalizePid is normalizing input pid (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached
PID (01) 2014-07-17 15:36:35 Slp: Completed Action: FinalCalculateSettings, returned True (01) 2014-07-17 15:36:35 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True (01) 2014-07-17 15:36:35 Slp: ---------------------------------------------------------------------- (01) 2014-07-17 15:36:35 Slp: Running Action: RunRemoteDiscoveryAction (01) 2014-07-17 15:36:36 Slp: Running discovery on local machine (01) 2014-07-17 15:36:36 Slp: Discovery on local machine is complete (01) 2014-07-17
15:36:36 Slp: Running discovery on remote machine: XXX-XXX-01After about 4 hours and 10 minutes, the step seems to time out and move on, however it doesn't seem to have discovered what it needs to and the setup subsuently fails

Hi,
Sorry Information you provided did not helped can you post content of both summary file and details,txt file on shared location for analysis.
Can you download Service pack again and try once more
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Issue installing SQL Server 2012(with SP1) on windows 7 Error result: -2067529718

Similar Messages

Maybe you are looking for