Issue installing WUSB54GSC drivers on Windows 7

Started a fresh installation on windows 7 RC 64 bit
popped in adapter, and tried installing disk, disk would get the portion where it asked to input the adapter, then just vanish after i click next.  I restarted, nothing.  I clicked set up again, says drivers are already installed....though there is no app to show profiles, im guessing it isn't.
went to 
 http://www.linksysbycisco.com/US/en/support/WUSB54GSC/download
version 1.00 would work just like the disk.
 version 2.00 would not start at all and would give an 
"the application was unable to start correctly (0x0000005).."
any tips?

You need to note that depending on the hardware version, you usually not able to "switch" between the different drivers.  You need to use the Version 1 drivers for to WUSB54GSC v1 adapter.
Also, Linksys has previously stated that since Windows 7 is a Release Candiate, they current do not offer / support their adapters under it. Until the time Windows 7 is offered as a retail store product, it is a "hit or miss" for getting drivers to work.

Similar Messages

  • HP Notebook - 15-ac043tu - NOT ABLE TO INSTALL WIFI DRIVERS FOR WINDOWS 7 -64 BIT

    I baught HP Notebook - 15-ac043tu. I am not able to install wifi drivers in windows 7 home edition . I have downloaded all drivers from HP Link shown below, http://support.hp.com/in-en/drivers/selfservice/hp-15-ac000-notebook-pc-series/7771404/model/8326116#Z7_3054ICK0K8UDA0AQC11TA930C7 Can anyone help me ?

    Hi I am facing a similar issue,Last week I bought my friend this Hp Notebook 15 (15-ac043TU) with DOS, I installed Win8 (64bit) and tried installing drivers from 'http://support.hp.com/, but its not accepting the WLAN drivers, I tried many, available for this model for win7 as well as for win8.1, wondering there was no win8 option, however it should work for Win8, I also followed your suggest but got the same error - "Update.cpp 1205" If you need Hardware Id, on 'Network Controller' - properties in devices manager, it is -PCI\VEN_14E4&DEV_4365&SUBSYS_804A103C&REV_01 Thank you and Regards:Gagan

  • Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

    Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
    Post relates to: HP TouchPad (WiFi)

    @MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
    See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Audigy 4 gives blue screen during install of drivers on Windows XP SP3

    FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
    Asus a8n-sli
    GB RAM
    6600 GT
    Audigy 4
    LC Power 550 W PSU
    I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
    I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
    How do get this card to work like it should? I also have a remote control that came together with the card.
    Im currently using the onboard AC97 Realtek ALC850 soundcard.
    Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

    Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
    Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

  • How to install bootcamp drivers on Windows 8?

    Hello,
    Today I decided to install Windows 8 onto my Mac Pro running 10.8.5 in order to play games on Steam.  I started BootCamp assistant and made a 65GB partition for Windows 8, and when I tried to install Windows I unchecked the top box (not sure what it said now).  Now I have a Windows computer, I CANNOT get back to OS X.  The Mac Pro will not boot into OS X, it just goes straight to Windows every time.  I've read that there should be some place in Windows to switch back, but I cannot find it.  I tried holding down the option key upon boot up at the gray screen, it still goes straight to Windows.  I tried holding command R at the boot up screen, it goes straight to Windows.  HELP!!  I picked the 60.5GB partition to install on, could it have somehow erased my OS X partition?  Is there a way to install bootcamp drivers from Windows?
    Any help would be greatly appreciated.
    Thanks,
    Jared

    [Enable Bluetooth functionality after a clean installation of Windows 8|http://aps2.toshiba-tro.de/kb0/TSB2C03FI0001R04.htm]
    If a clean installation of Windows 8 has been performed, Bluetooth is not present and does not work on your notebook. It is necessary to install two driver components manually to activate the Bluetooth functionality.
    - Toshiba System Driver
    - If your notebook is equipped with an Atheros or Realtek WLAN card with Bluetooth, you have to download the Atheros or Realtek Bluetooth Filter Driver
    - If your notebook is equipped with an INTEL WLAN card with Bluetooth, you don't need to download any filter driver

  • Access to installed device drivers on windows using Java?

    Is it possible to get access to installed device drivers on windows using java.

    Java has APIs for accessing the OS, The OS has APIs for accessing devices.
    Java does not have APIs for direct access to devices.
    However, depending on the device, you get what you want most of the time. You would only access the device directly if the device isn't supported by the OS or Java directly.
    Which device do you have in mind?

  • Having issues installing Laserjet 2250n on Windows XP

    Hi,
    I am having issues installing my HP Laserjet 2250n on my computer running Windows XP. I have downloaded a number of drivers from the HP site (listed below) and each time i try to install through windows new hardware wizard, it gives me a message telling me that the required software is not installed. I have tried installing Easy Printer Care software and then tried installing the driver but no luck either. It would help if the website mentions which driver is required for basic printing rather than showing multiple other drivers for other purposes which confuses people.
    Also, I tried logging a support case through the HP website and it is not recognising my serial number. This is very annoying since I can not log a case without entering the serial number. I have checked 5 times on the printer to ensure I am reading the serial number correctly, and the sticker does clearly mention serial number so i am reading the correct number.
    Please assist with this issue. Thanks.
    Website HP driver site:
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdHome/?javax.portlet.begCacheT​...

    HPuser5647,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Issues installing 10g ODAC on Windows 2008 with Oracle 10g Express

    I am new to Oracle and am having an issue installing Oracle Data Access Components on Oracle 10g 64bit running on Windows 2008 64bit.
    I need the ODAC installed to enable integration with SSIS.
    The issue I have if i install using ODAC10203x64 the setup file fails with a javaw error and the ntdll.dll.
    I then downloaded the ODAC1110720 which states it backwards compatible. It installs just fine, but now i am not sure as to how to configure it correctly as the Configuration util that loads in ODAC10203x64 does not run.
    The ODBC drivers are not visible under the ODBC connection manager although this may be an issue of just opening the 32Bit version.
    Any help would be appreciated

    Hi Ibrahim,
    You should decide what you require.
    32bit version can be installed on 64bit server and this should work fine (check the certification matrix for this).
    The "problem" is that you would not gain any performance benefit from the 64bit server
    If you want to have benefit you can upgrade the JVM to 64 bit version.
    I did this 3 years ago and I do not remember exact steps though everything worked OK.
    WARNING:
    this  can be unsupported, ask support to be sure
    - Install the 32 bit version on the server
    - Download 64 bit Java JRE/JDK and install it (well, you can search the same release as included in the AppServer or try newer one, 7 for example)
    - later, reconfigure the appserver so it uses the version you've installed, OR Copy the everything from c:\progfiles\java\... to the directory OraHome\... (forgot exact directories)
    try to search the forum, there had been a thread with the same question
    regards, michael
    Edited by: MickleSh on Sep 27, 2011 9:59 AM

  • Unable to install NVIDIA drivers on Windows 8 (Boot Camp)

    I'm running Windows 8 on a secondary partition on my MacBook Pro (17-inch, 2009).
    I have, in the past, been able to successfully install Windows 8 on a second partition on this mac and get everything working, including all of my device drivers. I had to erase that partition, though, so I no longer have that installation.
    I've installed Windows 8 again, but I'm not able to get my NVIDIA GeForce 9600 GT or 9400M graphics drivers to install!
    First of all, I tried installing both 5.0.5033 and 5.1.5621 support software. After a lot of hassle, I got 5.1.5621 to install, but only through the BootCamp\Drivers\Apple\BootCamp.msi file, not through the BootCamp\setup.exe file (the setup.exe tells me that this version of Boot Camp is not intended for this computer model).
    When I install the drivers that way, they don't install the NVIDIA drivers.
    Next, I've gone directly to the NVIDIA drivers folder inside the support software, and tried to install them from there. i've also downloaded newer versions of the NVIDIA drivers from their website, and with all versions of the NVIDIA drivers, I've had to go through a huge hassle to get them to go to the setup wizard (instead of telling me there's no compatible hardware).
    Then, I managed to get them to start installing, but - after Windows has me confirm that I really want to install the driver, despite it's signature - the screen invariably goes black, and my computer shuts down instantly, in what I can only assume is a kernel panic.
    This is incredibly frustrating, and I don't know what to do about it. I can't seem to find anyone else with the same problem. Can anyone help me?

    According to Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support
    MacBook Pro
    (17-inch, Mid 2009)
    4
    4
    DVD
    DVD
    DVD
    There is no support for Windows 8 (64-bit) on this machine.
    From Boot Camp Support Software 4.0.4033
    System Requirements
    MacBook (13-inch, Late 2006)
    MacBook (13-inch, Mid 2007)
    MacBook (13-inch, Late 2007)
    MacBook (13-inch, Early 2008)
    MacBook (13-inch, Late 2008)
    MacBook (13-inch, Early 2009 & Mid 2009)
    MacBook (13-inch, Late 2009) *
    MacBook (13-inch, Mid 2010) *
    MacBook Air (13-inch, Early 2008)
    MacBook Air (13-inch, Late 2008 & Mid 2009)
    MacBook Air (11-inch & 13-inch, Late 2010) *
    MacBook Pro (15-inch & 17-inch, Core 2 Duo)
    MacBook Pro (15-inch & 17-inch, 2.2 & 2.4GHz)
    MacBook Pro (15-inch & 17-inch, Early 2008) *
    MacBook Pro (15-inch, Late 2008) *
    MacBook Pro (17-inch, Early 2009 & Mid 2009) *
    MacBook Pro (15-inch, Early 2009) *
    MacBook Pro (13-inch and 15-inch, Mid 2009) *
    MacBook Pro (13-inch,15-inch, and 17-inch, Mid 2010)
    MacBook Pro (13-in, 15-inch, and 17-inch, Early 2011 & Late 2011)
    Mac Pro (Mid 2006)
    Mac Pro (Early 2008) *
    Mac Pro (Early 2009)
    Mac Pro (Early 2007)
    Mac Pro (Mid 2010)
    Mac Pro (15-inch and 17-inch, 2.2 & 2.4GHz)
    Mac mini (Mid 2007)
    Mac mini (Early 2009 & Late 2009)
    Mac mini (Mid 2010) *
    iMac (17-inch, Late 2006)
    iMac (20-inch, Late 2006)
    iMac (24-inch, Late 2006)
    iMac (20-inch & 24-inch, Mid 2007)
    iMac (20-inch & 24-inch, Early 2008)
    iMac (20-inch, Early 2009 & Mid 2009)
    iMac (21.5-inch & 27-inch, Late 2009) *
    iMac (27-inch, Late 2009) *
    iMac (21.5-inch, Mid 2010) *
    iMac (27-inch, Mid 2010)
    iMac (21.5-inch, Mid 2011 & Late 2011)
    iMac (27-inch, Mid 2011)
    all these drivers support Windows 7, 32 bit
    * drivers that support Windows 7, 32 and 64 bit
    BC 5.x drivers will cause problems. Have you considered using 4.0.4033 version. If your previous W8 installation continued to use BC 4.0.4033 drivers, they would work. Do you have the exact versions of drivers that you had on your previous W8 installation?

  • How Do I Install Apple Drivers For Windows XP?

    Okay, so I have a 15 inch mid 2012 MacBook Pro that is running OS X Mavericks. After many attempts, I managed to install Windows XP 32 bit as a secondary operating system on the HDD using Disk Utility. The only devices that Windows XP recognised upon the installation were the keyboard and the trackpad. I then inserted a Snow Leopard disc to install the Apple Drivers for Windows XP and it appeared as though the drivers got installed(the Boot Camp icon appeared on the taskbar next to the digital clock). However, when I restarted windows, none of the devices other than the keyboard and the trackpad worked. Does this imply that the drivers didn't get installed? If so, why is this and how can I install the drivers? If the drivers did get installed, why aren't the devices working? Please help me out, if possible. Thanks in advance.

    It does not work because you are running Mavericks and trying to use non-Mavericks drivers for an operating system (XP) that is not support on your hardware or your operating system.

  • Service keyagent failed to start when installing mac drivers on windows

    I have installed windows vista 64-bit with no problems on my imac, tried to install the drivers of the mac disk but when it comes to start the keyagent it says i don't have sufficient privileges to start the system services and the same for starting the MacHalDriver, i have full admin rights under vista. Then i cant start bootcamp from vista the exe file does not work. All the other drivers have installed and worked correctly. Any help for this???

    The solution outlined here:
    http://discussions.apple.com/thread.jspa?messageID=7105319
    using the torrent download fixes the problem.

  • CAN'T INSTALL ANY DRIVERS ON windows 10 pro x86 based system MODEL NO. HP G245 G3 NOTEBOOK

    I have Installed windows 10 pro x86 based system on my G245 G3 notepad I can't find  any drivers from HP website .
    I have tryed win 8.1 pro 64 bit drivers but they are not working with win 10 pro 32 bit operating system.
    please help me in this regard.
    Thanks & Regards
    I appreciate hp  and its supports
    Md Rayees Ahmad
    consumer
    This question was solved.
    View Solution.

    Hi,
    Nearly all hardware vendors won't release drivers for Windows 10 until Windows 10 is officially released (not preview). Windows 10 should install drivers for your machine after few updates. Windows 10 can find all drivers (except one: finger print) for my 5 years old machine. It should be able to find drivers for newer machines).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Issues installing SOA 11G on Windows

    I am having trouble installing SOA 11.1.1.6 on Windows 64 bit.
    1. I installed RCU
    2. I installed JDK 1.7.0.25 in C:\Program Files\Java\jdk1.7.0.25
    3. I installed Web Logic Server and selected jdk from above path.(since while installing WLS i din't find JROCKIT, so I browsed for JDK from my C:Drive)
    4. While installing SOA 11G, when I give setup -jreLoc C:\Program Files\Java\jdk1.7.0_25  I am getting Error "Java Run Time Environment was not found in C:\Program\bin\javaw.exe"
    I have set JAVA_HOME in Environment Variables.
    Can some one please help me fix this issue.

    Yes. I validated it. I tried with below 2 locations. I have installed this before in Windows and Linux. Strange that I am struggling to do it now..Not sure what I am missing.
    C:\Program Files\Java\jdk1.7.0_25\jre
    C:\Program Files\Java\jre7
    When I try with Quotes i.e, setup -jreLoc "C:\Program Files\Java\jdk1.7.0_25\jre"I get a screen with Error:setup.exe has stopped working (below is the log)
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    setup.exe_unknown
      Application Version:    0.0.0.0
      Application Timestamp:    4e71ef42
      Fault Module Name:    setup.exe
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    4e71ef42
      Exception Code:    c0000005
      Exception Offset:    00002b2f
      OS Version:    6.1.7601.2.1.0.272.7
      Locale ID:    1033
      Additional Information 1:    cb5a
      Additional Information 2:    cb5adf8f5bac4bc39db6c83fb76b8021
      Additional Information 3:    855b
      Additional Information 4:    855b1466c96ca73472fe5c46cb1df042
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

  • How to install BootCamp5 drivers for Windows 8?

    I have a Mac mini and have installed Windows 8 (64-bit) using Bootcamp. It works fine, but I hear that you should install some drivers. I downloaded them from the apple support website and put them on a usb flashdrive that uses the format "MS-DOS (FAT)".
    When I double-click "setup.exe", I get "This app can't run on your PC". When I run as admin it says that it can't find "D:\BootCamp\setup.exe".
    It may be worth mentioning that my mac is also running as a server (using the Mac OS X Server app).
    How do I fix this?
    Let me know if you need any more info...

    Finally, the solution! I just had to use another flashdrive. If anybody has this problem, all you have to do is just change flashdrive. In my case the pdf files were corrupted when transferred to the flashdrive, using disk utility seemed to remove most of the folders, and many other files were "broken" as well,  so change the flashdrive and it should work!

  • Problem installing Audio Drivers for Windows XP on G550

    I have tried all the posibilities to install sound drivers for Win XP on G550, but every attempt a big failure . Could someone help me to install sound drivers?
    System gives error of Now Media Object.

    try to download drivers from here

Maybe you are looking for