Issue is displaying Hierarchy

Hi,
I am currently facing issue in displaying the hierarchy.
I have 3 dimenion objects: Region, County, Branch.
And these 3 objects are optional prompt.
So, when Region is selected the corresponding country needs to be displayed in a column in the web, similarly when country is selected in the prompt Branch data needs to be displayed.
All these values needs to be dsiplayed in only one column in the WebI report.
I dont want to use Drill function, as I need to do manually in the report. Since, we are creating Dashboard from the report. So based on the prompt selected the next level data needs to be dsipalyed.
Could you please provide any solution for this issue as soon as possible.
Thanks
Sindhu

Dicky,
I struggled with this for 3 days, I understand your pain. After a deep investigation I found that my mapping was incorrect. Try this:
1) Double click on DRILLDOWN connection between output and input ports
2) Check if WEBAPI inputfield has the web api commands
3) Make sure that none of the other input fields have values set. It usually happens that when you connect the output to the input port, similar (or like) variables are mapped automatically, for example in my case, I had Org_unit mapped to @Org_unit automatically. Delete such mappings. You should have only the WEBAPI input field with an assigned value.
Hope this helps,
Kiran

Similar Messages

  • Issue with displaying summary in the Page Bottom

    Hi Friends,
    I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
    I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
    If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
    for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
    But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
    Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
    Regards,
    Subbarao

    HI,
    Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
    Eg: Protect
    bottom
    text
    endbottom
    endprotect.
    Regards,
    Venkatesh

  • Urgent Error in Displaying Hierarchy in Bex- like not assigned Material

    Hi Gurus,
    plz  solve my problem like displaying Hierarchy in Bex ,
    I loaded hierarchy from R/3 system into Bw 0Mterial.
    In Bex 0material Properties I Selected heirachy on Material , this heirarchy having 8 levels,
    but in the out put it showing only one level displayng
    like Not Assigned Material.
    i did all the bex setting well, but i dnot know why i am getting this ...
    plz any one help..
    Thanks in advance
    Anil

    hi,
    Is your heirarchy uploaded properly for 0Material ?? If yes juct check out if your transcational data is in sync with the hierarchy master ? If it is not then it wuill display as Not Assigned..
    Regards,

  • How to fix iframe issue that displays XML values instead of formatted XML in IE11

    The following sub.jsp file shows the formatted XML properly as expected when is opened directly:
    <% response.setContentType("text/xml"); %>
    <book>
    <chapter1>chapter 1</chapter1>
    <chapter2>chapter 2</chapter2>
    </book>
    IE11 shows the result as below which are colored and can be collapsed or un-collapsed:
    <book><chapter1>chapter 1</chapter1><chapter2>chapter 2</chapter2></book>
    But if the sub.jsp is opened in an iframe from the below main.html, it only shows the values of the XML in the iframe:
    <!DOCTYPE html>
    <html>
    <head>
    <meta charset="ISO-8859-1">
    <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
    <title>Insert title here</title>
    </head>
    <body>
    <iframe src="sub.jsp"></iframe>
    </body>
    </html>
    The iframe shows only the XML values, i.e., chapter 1 chapter 2 in IE11. This issue does not happen in IE8.
    I appreciate to your if you know how to address this issue.
    Regards, Amir

    The following sub.jsp file shows the formatted XML properly as expected when is opened directly:
    <% response.setContentType("text/xml"); %>
    <book>
    <chapter1>chapter 1</chapter1>
    <chapter2>chapter 2</chapter2>
    </book>
    IE11 shows the result as below which are colored and can be collapsed or un-collapsed:
    <book><chapter1>chapter 1</chapter1><chapter2>chapter 2</chapter2></book>
    But if the sub.jsp is opened in an iframe from the below main.html, it only shows the values of the XML in the iframe:
    <!DOCTYPE html>
    <html>
    <head>
    <meta charset="ISO-8859-1">
    <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
    <title>Insert title here</title>
    </head>
    <body>
    <iframe src="sub.jsp"></iframe>
    </body>
    </html>
    The iframe shows only the XML values, i.e., chapter 1 chapter 2 in IE11. This issue does not happen in IE8.
    I appreciate to your if you know how to address this issue.
    This issue is also posted at below link:
    https://social.msdn.microsoft.com/Forums/en-US/5b0692b4-d312-4797-9089-42c1029ac059/how-to-fix-iframe-issue-that-displays-xml-values-instead-of-formatted-xml-in-ie11?forum=iewebdevelopment
    Regards, Amir

  • Issue with displaying Unicode Characters returned by a webservice

    Hi, We are developing a mobile application which provides multi language selection (Arabic & English). but we are having an issue with displaying returned JSON which has Arabic text. The output we get is as below. Our .net client throws the following
    exception. Appreciate your kind help and thank you in advance.
    [net_WebHeaderInvalidControlChars]
    Arguments:
    Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=4.7.60408.0&File=System.Net.dll&Key=net_WebHeaderInvalidControlChars
    Parameter name: name”
    Returned JSON:
    https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar
    Connection ? Keep-Alive
    Content-Type ? application/json; charset=UTF-8
    Date ? Fri, 27 Feb 2015 03:35:43 GMT
    Keep-Alive ? timeout=1, max=100
    Last-Modified ? Thu, 26 Feb 2015 14:43:55 GMT
    Link ? <http://72.44.81.184/~shababcapital/wp-json/posts/131>; rel="item"; title="387 Ù?اعب Ù?Ù?اعبة ضÙ?Ù? فعاÙ?Ù?ات اÙ?تدرÙ?ب اÙ?Ù?ستÙ?ر Ù?اÙ?تشاف اÙ?Ù?Ù?اÙ?ب اÙ?رÙ?اضÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/119>;
    rel="item"; title="387 Ù?اعب Ù?Ù?اعبة ضÙ?Ù? فعاÙ?Ù?ات اÙ?تدرÙ?ب اÙ?Ù?ستÙ?ر Ù?اÙ?تشاف اÙ?Ù?Ù?اÙ?ب اÙ?رÙ?اضÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/118>; rel="item";
    title="اÙ?جÙ?در Ù?ؤÙ?د استÙ?رار "اÙ?شباب Ù?اÙ?رÙ?اضة" فÙ? دعÙ? Ù?سÙ?رة اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/117>; rel="item"; title="اÙ?جÙ?در
    Ù?Ø´Ù?د بدÙ?ر اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø© فÙ? تطبÙ?Ù? رؤÙ?Ø© Ù?اصر بÙ? Ø­Ù?د فÙ? احتضاÙ? اÙ?شباب", <http://72.44.81.184/~shababcapital/wp-json/posts/55>; rel="item"; title="اÙ?جÙ?در: Ù?دفÙ?ا
    تحÙ?Ù?Ù? أفضÙ? فرص استثÙ?ارÙ?Ø© Ù?Ù?Ø£Ù?دÙ?Ø© اÙ?Ù?Ø·Ù?Ù?Ø© Ù?Ù?بارÙ? اÙ?Ù?شرÙ?ع اÙ?جدÙ?د", <http://72.44.81.184/~shababcapital/wp-json/posts/45>; rel="item"; title="اÙ?جÙ?در Ù?Ø´Ù?د بدÙ?ر
    اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø© فÙ? تطبÙ?Ù? رؤÙ?Ø© Ù?اصر بÙ? Ø­Ù?د فÙ? احتضاÙ? اÙ?شباب"
    Server ? Apache
    Transfer-Encoding ? chunked
    X-Content-Type-Options ? nosniff
    X-Pingback ? http://72.44.81.184/~shababcapital/xmlrpc.php
    X-Powered-By ? PHP/5.4.24
    X-WP-Total ? 6
    X-WP-TotalPages ? 1

    I originally downloaded it using IE and viewed the content in Fiddler.  Use this code to get the content:
    string url = "https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar";
    HttpBaseProtocolFilter MyFilter = new HttpBaseProtocolFilter();
    MyFilter.IgnorableServerCertificateErrors.Add(Windows.Security.Cryptography.Certificates.ChainValidationResult.InvalidName);
    HttpClient request = new HttpClient(MyFilter);
    string response = await request.GetStringAsync(new Uri(url));
    MyContent.Text = response;
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Issue with displaying Greek characters in Oracle 11.1

    Hi,
    We are having issues with display of Non-English language (for ex Greek) text on Pega-PRPC. The text is stored in a reference table in Oracle DB. However there is not need of translation in PRPC as it has the capability of displaying non-english language also.
    I believe that it is a issue with DB settings, although not sure of what is the setting.
    Below is the result after running the query: select * from nls_database_parameters
    NLS_LANGUAGE     AMERICAN
    NLS_TERRITORY     AMERICA
    NLS_CURRENCY     $
    NLS_ISO_CURRENCY     AMERICA
    NLS_NUMERIC_CHARACTERS     .,
    NLS_CHARACTERSET     AL32UTF8
    NLS_CALENDAR     GREGORIAN
    NLS_DATE_FORMAT     DD-MON-RR
    NLS_DATE_LANGUAGE     AMERICAN
    NLS_SORT     BINARY
    NLS_TIME_FORMAT     HH.MI.SSXFF AM
    NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
    NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
    NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
    NLS_DUAL_CURRENCY     $
    NLS_COMP     BINARY
    NLS_LENGTH_SEMANTICS     BYTE
    NLS_NCHAR_CONV_EXCP     FALSE
    NLS_NCHAR_CHARACTERSET     AL16UTF16
    NLS_RDBMS_VERSION     11.1.0.6.0
    Please help.

    869852 wrote:
    Hi,
    We are having issues with display of Non-English language (for ex Greek) text on Pega-PRPC. The text is stored in a reference table in Oracle DB. However there is not need of translation in PRPC as it has the capability of displaying non-english language also.
    I believe that it is a issue with DB settings, although not sure of what is the setting.
    The first question that needs to be answered is whether the problem is a data storage problem or data presentation problem.
    The query below will answer this question.
    SELECT ASCIISTR(greek_column) from greek_table where key_id = <specific_value>;

  • Performance Issue With Displaying Candidate Details for iRecruitment

    We are in EBS R12.1.3 when we trying to display the Candidate Details page in iRecruitment iRecruitment >vacancies>applicants> click on applicant>   the page spins for  a quite whille to show the results and some times we see the 500 errors..
    We are in R12.1.3 and also applied the  Patch.10427777:R12.IRC.B patch.. is there any  tunnign steps for the iRecruitment  page=/oracle/apps/irc/candidateSearch/webui/CmAplSrchPG

    You have already applied the patch mention in note: Performance Issue With Displaying Candidate Details Page in 12.1.3 (Doc ID 1293164.1)
    check this note also Performance Issue when Clicking on Candidate Name (Doc ID 1575164.1)
    thanks

  • How to display Hierarchy in WDA Search help

    Hello Experts,
    Please let me know if i can display hierarchy (tree like structure) in WD ABAP search help,i am quite new to WD ABAP.
    Any suggestions and inputs would be very helpful.
    Thanks & Regards,
    Siddharth

    I think tree UI element will be useful to you. Pls refer following links for more help:
    [Link1|http://help.sap.com/saphelp_nw70/helpdata/en/21/ad884118aa1709e10000000a155106/content.htm]
    [Link2|http://help.sap.com/saphelp_nw70/helpdata/en/59/a98b411fb4b05fe10000000a1550b0/frameset.htm]
    [Link3|http://help.sap.com/saphelp_nw70/helpdata/en/5a/088b41b4b3b25fe10000000a1550b0/frameset.htm]
    I had similar requirement of search help in my project. I had created component with tree ui element and called it using component usage in another component on click of button. I hope this will help you.
    Regards,
    Saket.

  • No unique display hierarchy - ERROR

    Hi,
    I get his below error for my profit center IO in my report.
    E025(R9E) Errors: No or no unique display hierarchy for 'Drill down characteristic' 'Profit Center'.
    Profit Center has a restriction on a hierarchy variable.
    Please let me know what this error means and how to rectify.
    Thanks,
    Arun KK

    Hi,
    I also have this problem.  I think this is caused because I want do make a selection on a characteristic using a hierarchy node variable.  However, I do not want this characteristic to display in the report using the hierarchy.
    This is the first time I try to do that with BI 7.0.  However, in previous versions, it was working fine...
    I couldn't find any notes.  Will let you know if I find something.
    Regards,
    Francine

  • Combine presentation hierarchy and display hierarchy

    Hi,
    We have a query with GL account and cost center in the rows.  We have a custom-built hierarchy on GL account and next to that we want to display our rows as a display hierarchy.  So far so good.
    But next we would like to show our GL account hierarchy upside down, meaning with the lower-level nodes above.  This setting however is not working in combination with the display hierarchy.  I guess the solution would be to also mark the display hierarchy as being "upside down", however as far as I know this is not possible.
    Anybody has a solution for this?
    Thanks!
    Veerle

    Hi,
    1: To add a new char, add the info object as external chars in the Info object maitainance scree --> hierarchy tab. Then go to create hierarcy option. Now it will add you to insert the info object as a node.
    2: Here you are mixing the Units in calculation.So you are getting the error as defined in TCODE RSCUSTV4. So as others given the idea, you can use the Data Function in a Formula (NO Dim).
    Happy Tony

  • "Drilldown characteristic" not permitted for display hierarchy

    Hi Experts,
    I want to display the hierarchy in my BEx Analyzer for which i tried to activate the hierarchy for the same and got the below error.
    "Default values "Drilldown characteristic" not permitted for display hierarchy"
    Also I have used a standard variable for this infoobject and it is used for user input in the selection screen of the report.
    Eventhough we proceed further with this message, in the Report display, it is not showing the hierarchy in the display.
    Please respond ASAP.
    Rgds
    Kumar

    Hi,
        I don't know why you are getting this error. But we can create hierarchy either by using herarchy name or else by creating hierarchy variable......In characteristics for which you are creating hierarchy, in display tab of properties give DISPLAY AS KEY, SORT CHARACTERISTICS -- AS IN THE QUERY  and RESULT ROWS --- ALWAYS SUPPRESS....
    In HIERARCHY TAB --- Give Hierarchy name select use hierarchy setting check boxand select always show radio buttons......
    Do in this way and it may work......
    Regards,
    Kalyani.

  • Issue with displaying text in BEx

    Hi all,
    We are facing an issue with displaying text in the query output.
    We have a master data carrying charac ' 0MATERIAL'.When i do maintain master data ,I am able to see medium description in the output.
    Now when i drag 0MATERIAL in bex designer and in properties set display to key and text(medium text), it shows me only the key and it shows some wierd text which is in no way related to the medium description ( that was shown under maintain master data)
    can anyone pls tell me why i am not able to see the medium description when executing the query that too when the text is loaded.
    Pls help
    Regards,
    Suchitra

    But what i wouldlike to know is what about the master data which is present in 0MATERIAL now?
    Nothing will happen to your data.
    Its showing there ...dosent that mean its present and activated?
    They are present n in active version.
    If u change any records they will be in M version..by activating the data...u are converting it to A version.
    Regards,
    Ram.

  • Issue in display of Overall Result while implememting RRI

    Hi All,
    I have a base report which gives all the material for which no issues are done in last 3 yrs for a plant.
    I have a new report which has all the materials passed from the base report and then i display the consumption of those in rest of the plants.
    When I display the report, the Overall Result is displayed incorrect.
    Child report
                       Selected Plant Stock  Selected Plant Stk value    Consumption in 12Mnt_rest of the Plants
    Material   Plant    Overall Result             Overall Result                        P1   P2
    10001                      1.00                            395.00 EUR                    2.00  1.00          
    10002                      1.00                                1.00 EUR                    2.00  5.00
    10003                      3.00                              74.25 EUR                     2.00    6.00
    Overall Result            35.00                          12600.25 EUR                    6.00    13.00
    When Analysed We found that the overall result is the result of the base report. for the 1st and 2 column.How Do I change the reuslt.
    Appreciate help in advance.
    Harika.

    Hi Harika,
    In the Report assignments ,make the PLant and result as "Delete" mode for these infoobjects.
    Just come back with ur assignment settings,it has got to do with these Settings !!!!!!!!!!
    Rgds
    SVU123

  • In BEx, how to display hierarchy Upper Node with selected Lower Nodes only

    Currently I am displaying the Cost Centre (GFL Responsibility Cost Centre) hierarchy in a workbook. I want to be able to filter on this hierarchy dynamically. E.g. the upper node must be displayed including the rolled up results for this node, together  with a selection of the lower nodes e.g 2 nodes ( not all the lower nodes related to the upper node must be displayed in the query).
    What's possible when filtering :
    To filter on the 2 lower nodes only ( results are displayed as required)
    Not possible:
    When I include the higher node of the 2 lower nodes in the query, All the lower nodes of the higher node are displayed, and the filter selection of the lower nodes are over written.
    This is logically what's expected when the higher node is included in the filter.
    Creating a hierarchy variable gives the same problem, I am not able to filter on the hierarchy nodes as required.
                      <b>Upper Node</b>
              <b>Lower Node1 LowerNode2 LowerNode3</b>
    Filter the report for UpperNode and LowerNode 2 & 3 only
    <b><i>Thanking YOU in advance. Will reward points for the correct help</i></b>

    Hi
    Do you want to show particular node or particular level ?
    If you want particular node , then create hierarchy node variable and restrict to that node ( 3rd node)
    If you want particular level, what does that mean  say i am taking employee hierarchy and the hierarchy is as below.
    Ihe setting that we have is to expand upto n levels but  if yiou say i need level 2 what does that mean and how do you want to show in report ?
           A -
    (level 1)
           B,C,D( --child of A ) --- level 2
              E(Child of B), F(Child of C)   -
    level 3.
    Regards
    vamsi

  • Issue on display

    Hi guys,
    I'd like to ask you if it's normal this issue along the bottom of my MacBook's Pro high resolution Led display.
    The official Apple service provider told me that there isn't any problem at all but I'd like to know what you think about.
    MacBook Pro 13" mid 2010, 2,4 GHz Intel Core 2 Duo,4 GB 1067 MHz DDR3,NVIDIA GeForce 320M 256 MB,OS X 10.9.5 (13F34)
    Any help will be appreciated.
    Thanks in advance
    Alessandro

    Hi,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that you have display issues in your brand new Lenovo X1 carbon.
    From the snapshots, it seems like a cable/LCD issue. Is the display working fine when you connect it to an external monitor?
    Since it’s a brand new machine, I strongly recommend you to contact our technical support for assistance.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Best Regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for