ISSUE: Lenovo Solution Center update resets all Settings!

Longstanding problem continues with update to 2.0.020: When Lenovo Solution Center (LSC) updates, all Settings are reset, wiping out options to suppress certain screens and alerts. While not a functionality issue, it's very annoying to have to configure LSC all over again after evey update, so much so that some of my clients stop updating (one client called it the Lenovo Annoyance Center, and removed it entirely), so please fix this issue. Thank you.
Hope that helps,
John
ThinkPad T450s [ i7-5600U | 8GB | 1TB SSD | Full HD IPS | 802.11ac | BT | Webcam | FR | Win8.1Pro64 ]

We're aware of this issue and agree it is very annoying, especially since LSC updates itself so often.  LSC team tells me fixing it is a priority for an upcoming release (either 2.1 or 2.2).  Sorry for this inconvenience caused by LSC.

Similar Messages

  • Eversince I updated my iphone 4 to IOS 5.0.1, sometimes I get a 'No Service' or 'Searching'  signal where my network signal should be upon which I have  to 'Reset all Settings' to get the phone normal again.Is  there a solution to this?

    Eversince I updated my iphone 4 to IOS 5.0.1, sometimes I get a 'No Service' or 'Searching'  signal where my network signal should be upon which I have switch the phone off then on then 'Reset all Settings' to get the phone normal again.Is  there a solution to this?

    I couldn't find the edit button on my original post so I am posting an update here.
    I have gone through more apps and have had good luck on all but one more.  And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should.  On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much.  I will post a note in the app store to let them know.  I really like the Yahoo app better than the new stock app.
    I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine. 
    Starbucks app works as it should. 
    I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

  • My new iPad mini can't install apps - I have updated to IOS 7.1.2 - I note that one possible solution is to reset all under settings General but I don't see "reset" - please help

    My new iPad mini can't install apps - I have updated to IOS 7.1.2 - I note that one possible solution is to reset all under settings>General but I don't see "reset" - please help

    1. Try reset iPad
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    2. Sign out and sign back in to iTunes and App Store
    Settings>iTunes and App Store>Apple ID>Sign out and sign in

  • Lenovo Solution Center says Windows Update needed Windows 10

    Thanks for your help, I have the Lenovo B50-30 AIO and recently upgraded from Windows 8.1 to Windows 10. Everything seemed to go flawlessly with the exception of one small problem. I am constantly being nagged by the Lenovo Solution Center to Update my Operating System. When I run Windows update, it says 'No Available Updates', yet LSC still nags me with that screen. When I go into LSC and click on the Launch button to fix the problem, nothing happens. Is this a problem with LSC or is there something that I am doing wrong? 

    All,
    I've shared this conversation with our LSC development team and here is how I understand the siutation...
    LSC 2.8 was tested with Windows 10, but this situation occurs because Windows 10 does not fill in the update date after the OS install.   After 1 day, and the date changes, the symptoms should go away. 
    We are working on improving this in the next version fo LSC 3.1 which is a few weeks away...
    Edit:
    Speedwell, I've also noted the launch button issues with the team to re-test and make sure works properly.  
    Update 8/5/15 - confirmed launch button issue on 2.8.5 and lower.  This is going to be addressed in a new version.
    An interrim support tip is being released on our support site to explain the work around:
    1) Navigate to taskbar
    2) Type "Windows update" in teh search the web and windows field
    3) Select "Check for Updates" at the top of the search results
    4) The Windows update will appear
    5) Select check for updates button
     Apologies that this did not work as intended, and I appreciate your patience as we release an updated version.
    Best regards,
    Mark
     

  • HT204368 After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth plantronics model M25.  I tried reset all settings after turning on and off also submitted diagnostic.  Do I have to buy yet another bluetooth set?

    After I updated my iphone 4 to ios 6.1.3 I can no longer connect to my bluetooth, plantronics model M25.  I tried reset all settings after turning on and off also submitted diagnostic.  Do I have to buy yet another bluetooth set?

    Thank you wjsten for your soon reply. Unfortunately on these days I'm in a country that Apple don't have any retail store here and for sake of time I prefer to fix it myself to DHL it to the nearest country to use its warranty. Do you have any idea how can I fix it? Do you think it's a software issue?

  • Those Who Got 'Reset All Settings' to Fix the Proximity Sensor Issue...

    I thought I would start a thread dedicated only to the steps that people took to get their proximity sensor issues resolved. So far, there are only scant posts lost deep in huge threads.
    For example, did you do a hard or soft reboot after you reset all of the settings? Did you make calls right away? Did you change all of your settings back first before making a call? Did you only change some settings before a call and then others after? Did you set up your visual voicemail right away? The reason why I am asking is perhaps there is a problem with a particular setting that we can narrow it down to...or maybe a certain combo of settings since resetting just the network settings seemed to work for some and not for others.
    Also, if it worked, was it only a temporary fix?
    Please post constructively. I have been following the threads for days, and I am well aware that this may be a hardware issue.

    labeck wrote:
    On my fifth phone and am currently working with an apple engineer to help investigate the issue. The best thing I've done to help temporarily is to reset all settings. That seems to hold for 24 hours or so but the issue always returns.
    Hope you get something to work, but I'm fairly certain apple won't be able to do a firmware update to fix this or they would of already done so or at least mentioned it.
    Thanks! That's what I was beginning to think as well...and it's also what I was most afraid of...
    Message was edited by: labeck
    Message was edited by: LorangeJuice

  • My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password whenever I need to update apps it shows his previous user name,  and is asking for his password.  How do I fix that?

    My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password, whenever I need to update apps it shows his previous user name,  and is asking for his password.  How do I fix that?

    dom59 wrote:
    Ok, when I go into my Apple ID account, everything looks right.  It does show my user name.  It's only on the iPod that it shows my husband's previous user name, and it asks for his password.  Everything in iTunes and my account looks right.  The issue only seems to be with the actual device, iPod Touch 4th gen.
    There is more than one way to access the Apps Store and the iTunes store.  One is via iTunes on your computer, and the other is via the apps on your iPod.
    Just because you are logged in on your computer does not mean you are logged in on your iPod.
    The reason your husband's user name comes up is because he was the last one to log on.  You can change that by going to Settings>Store.  Tap the Apple ID, Tap Sign Out, Tap Sign In, Tap Use Existing Appel ID, enter your e-mail address and Apple ID password, and tap OK.

  • Lenovo Solution Center does not sense or allow Windows Update after Windows 10 upgrade

    Also see: https://forums.lenovo.com/t5/Lenovo-A-B-C-N-S-Flex-and/Lenovo-Solution-Center-says-Windows-Update-needed-Windows-10/m-p/2136161#M6832 I'm having exactly the same issue as the user who started the thread linked above. After installing Windows 10 (and having no particular issues with the installation), LSC won't leave me alone about needing to run Windows Update. But when I click the Launch button provided, nothing happens. LSC is also recommending I update drivers and things, but the link provided to the Lenovo website also doesn't work. I had to run Windows Update and find the updated drivers on the Lenovo site myself. I happen to have a G505s, but the issue is obviously not restricted to one model.

    Maybe a Lenovo server is down. Check again later or tomorrow.
    Of course it might be that your firewall or other protection software is blocking the application from communicating with the Lenovo server...
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • Just I updated my iPhone 4s then I was reset all settings on my iPhone then my iPhone don't open

    Just I updated my iPhone 4s then I was reset all settings on my iPhone then my iPhone don't open

    Hi, Thanseef.  
    Thank you for visiting Apple Support Communities.  
    I would need clarification on what you mean by your iPhone will not open to provide a better answer.  However, this sounds like you may be referring to Activation Lock.  Here is some information that may help if this is the issue you are experiencing.  
    Find My iPhone Activation Lock 
    http://support.apple.com/en-us/HT201365
    Cheers, 
    Jason H.  

  • 3gs no service after updating to ios 5 tried network reset, reset all settings and even restoring from back been with out phone for 3 weeks now need help telus cant find network problem and apple has bad customer support please help!!!

    my 3gs has no service after updating from ios 5 tried resetting network settings, resetting all settings and restoring from back up on itunes.
    telus cant find any network problems and apple is difficult to deal with.please help 3 weeks with no phone and $70 a month not happy.

    I have been having a similar problem for the last few days.Without warning the signal will just completely duck out leaving the device searching for several minutes before settling on a no signal message.
    Sometimes restarting the device, toggling data and 3g settings or toggling Airplane Mode will set things right. However, a lot of the time I've been left without a working phone.
    I don't believe this is a SIM issue, as I had to change my SIM only one month ago for another signal related problem. Again any help would be appreciated here as well.

  • My IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.

    my IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.

    Yes I have put in the correct password, its all numbers so can't get it wrong really.
    It has connected before as has my iPod and that won't connect either. I have checked that they aren't on the blocked list of the wi fi. Managed to download the new version of iOS and that hasn't made a difference.
    I have the wi fi plugged directly into the computer rather than the booster hub as the computer won't connect to it when its in the hub. I did get the iPad to connect to the internet when it twas in the hub but once I upgraded the iOS it won't accept the wifi password in the hub either.

  • Lenovo settings dependency package & Lenovo Solution Center

    The Lenovo Solution Center showed error message about Battery on System tab,and suggested to install the Lenovo settings dependency package.But there is no Lenovo settings dependency package in the download page for T61p but yes for other models.In the attached Readme.txt, T61p is not supported model.What should I do?What do you think? Thank you for your attention.

    Yes, I use Windows 8.1.I'll try to install that package as you recommend,and report weather any problem occurs or not.Thank you, ColonelONeill.

  • Lenovo solution center won't install update

    Hi,
    I've got a rather high spec Lenovo Thinkpad Yoga, which I love. However, the Lenovo Solution Center keeps popping up saying "A new version of Lenovo Solution Center is available. Do you want to update now? <Update now> <Later>
    When I click on update now, it downloads the ~35mb download for "2.4.002", but then doesn't install it. I'm concluding it doesn't install it by the fact that it remains on 2.2.002, the next day it'll ask me to download it again, and it does nothing after completing the download that would indicate that it has indeed updated the software.
    I'm running Windows 8.1
    According to the splash screen for Lenovo Solution Center, it is currently on version 2.2.002, revision 17630.
    Thanks!
    Andrew

    I know this is an old post but for anyone else having this problem...
    Once you download the update via Lenovo Solution Center and it doesn't automatically install:
    1.  Close the Lenovo Solution Center
    2.  Go to the folder "C:\Users\<username>\AppData\Roaming\LSC\Lo​cal Store"
    3.  Right-Click on the LSCSetup64.exe file (or whatever your LSCSetupXX.exe file is) an choose "Run as Administrator".
    Be sure to check the date of the LSCSetupXX.exe file to make sure it is current so you know it is what you just downloaded.
    This will install the new version.
    Once complete, open the Lenovo Solution Center as normal.
    Enjoy!
    Frank

  • StorLib error message in the Lenovo Solution Center

    I keep getting an error message under the device manager tab in the Lenovo Solution Center.
    It says under drivers - 'StorLib bus (virtualstorage support)', status is 'Uninstalled'.
    I can't find anything anywhere about this or how to correct the issue.
    Any help out there?
    Moderator Note; subject edited.
    Solved!
    Go to Solution.

    The device manager pops up the screen with all the 'devices' . When I expand 'other devices', the storlib bus shows up with a yellow triangle and ! mark. Double clicking brings up  a window, with status;
    "The drivers for this device are not installed. (Code 28)
    There are no compatible drivers for this device.
    To find a driver for this device, click Update Driver."
    When I try to update it, no driver can be found.
    One option os to uninstall it. Guess that would get rid ot the error if it is something not being used.

  • Lenovo Solution Center - Sugar Sync- uninstall

    Since uninstalling Sugar Sync, Lenovo Solutions Centre reports under Device Manager that there is a problem with the driver StorLib Bus. When I check in Device Manager, Storage Controllers, Microsoft Storage Spaces Controller, the device is working correctly. What needs to be done to LSC to make it not report a problem that probably isn't there. 
    Any help, Thank you. Petedf.
    Solved!
    Go to Solution.

    Hi,
    Welcome to Lenovo Community Forums!
    I’m sorry to inform that it is a false indication from Lenovo solution center. Since Windows doesn’t detect any missing device drivers within the device manager, there is no driver that is missing.
    If the warning keeps popping up, change the reminder settings to “never”. Probably, you have to wait for an LSC update in which the bug would be fixed.
    Refer here for further information regarding the issue.
    Hope it helped!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • How can i delete folders from my email on an iphone 5

    I have extra folders in my email maiboxes  i have a new iphone 5 i would like to delete the ones i do not need

  • Whole Functionalities of  Fixed Asset in SAP R/3

    I just need some document o whole Funcitionalities of Fixed Assets In Sap R/i.e ECC 6.0. Best Regards, Sudhanshu Dang

  • BPEL's NotifyUserOfChange with Content Services

    We have a problem getting data from Collaboration Suite's Content Services. We are using BPEL 10.1.2. We've used the built in jdev project NotifyUserOfChange. We are able to assign the Workflow so that each time a Conten Services file is updated in c

  • New apple tv restarting as I scroll across the menu - help?

    Just bought the apple tv yesterday. When I get to the Movies and start to move my cursor across to music and then over to Podcast - as soon as I move over to podcast the unit restarts and does not allow me to move over to other selections like Intern

  • Material Master Field Change

    Hi Experts I have a Field in MRP2 View MARC -> Field LGPRO (Issue Storage Location). I am using MRP2 view, only for this field. 1) Is it possible I can move this Field to Plant/Storage location view ?? 2) How to restrict this setting only for particu