Issue material to particular storage location with particular mvt type

Hi
I have a question about production order confirmation
If i enter the storage location in goods movement page automatically come for movement type
ex.
I want to issue the material to scrap location.if i enter material and storage location SCR movement type should come 531.
Is it possible ?
Pl guide me

531 movement type is used for receipt of By-products. So in your case if a particular item you want to receive in scrap location by the use of 531 then you have to define the item as by-product.
If you define the material as by-product then during production order confirmation at goods movement screen, the movement type will be automatically 531.
The main material (manufactured material) will be received using 101 and the by-product will be received by 531.
Please follow below steps to define the item as by-product:
- First change the BOM of the header material (the material which is manufactured) and enter the item with negative quantity.
- Run Re-read PP master data for the production order.
- Try confirmation.

Similar Messages

  • Serial numbers are not copied to new storage location for 311 mvt type

    Hi Guys
    I have 10 stock of material A in 001 Storage location ,which all the quantity is serial number managed
    I have transfered 10 quantity of Material A to 002 location from 001 location using 311 MIGO
    But serial numbers are not copied to 002 location after transfer posting
    001 and 002 are both are WM linked and belongs to same plant
    Can any body suggest good solution,how it can be done

    Hi
    1.Check in material master whether serial number management is active in Plant data/stor Tab and serial number profile is assigned
    2. Check while doing MIGO once if u enter the material and transfer qty you are getting the serial number tab or not
    3. If everything is ok, then after posting the document check the serial number status in IQ09, check the stock type and the storgae location in the serdata tab
    Regards
    Amuthan M

  • MM Transaction did not flow to PA - specific storage location with mvt 945

    Dear all,
    When we use movement type 945 to transfer some materials from one plant to another plant, the difference of the inventory value (due to the different standard prices in different plant) are charged to a COGS account.  This COGS account has been mapped to a value field (Inventory adjustment value field) in PA transfer structure.  The business transaction RMWL has been checked for "relevant to legal update" using SM30 - V_TKE_BUS_TRANS" (we are on SAP 7.1 patch level 6). 
    This MM/FI value flow issue only happen to the stock transfers from this specific storage location with this movement type 945. 
    I don't see whether or where to specify storage location in PA configuration.  The plant has been added to "assign costing keys to any characteristics".
    Can you please let me know what the cause might be?
    Thank you so much!
    Jennifer

    Dear all,
    When we use movement type 945 to transfer some materials from one plant to another plant, the difference of the inventory value (due to the different standard prices in different plant) are charged to a COGS account.  This COGS account has been mapped to a value field (Inventory adjustment value field) in PA transfer structure.  The business transaction RMWL has been checked for "relevant to legal update" using SM30 - V_TKE_BUS_TRANS" (we are on SAP 7.1 patch level 6). 
    This MM/FI value flow issue only happen to the stock transfers from this specific storage location with this movement type 945. 
    I don't see whether or where to specify storage location in PA configuration.  The plant has been added to "assign costing keys to any characteristics".
    Can you please let me know what the cause might be?
    Thank you so much!
    Jennifer

  • Material stagging at storage location level

    Hi Guys,
    When i do material stagging at storage location level (MF60) material moved from one storage location to another storage location 311 and material document is created in system .
    I want to do it through two steps that is material issue from one location and receipt in other location
    how to do it , what configuration need to be done .
    I do not have in WM in scope of implementation.
    Thanks and regards
    Thamizhchelvan G

    Dear,
    The movement type 313 removes the stock from the first storage location and in conjunction with this movement type yuo use Movemnt type 315 which in turn places the material in the receiving storage location.
    In OMBA you will see Goods Issue Doc Type..
    If you click that in the next screen , you will find Tcodes & Doc Type...
    Now Go to that T code & Press F4 in the Movement types filed...
    So the Above Doc type is applicable to those Mvt types..
    These transactions are attached to the Movment types in OMJJ transaction, select the movment type click on Allowed transactions page.
    So based on the transaction attched to the Movement type the document type is determined for the Movement types.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Material resticted to storage location.

    Hi
    I want to restrict material to a particular storage location.ie
    I have created storage location for raw material,semifinished and finished materials.Is there any way that system should not allow any goods rceipt in any other storage location.ie There should be no goods receipt for raw material in semifinished storage location.
    Regards
    SAP

    Hi,
    While creating material master record you will be mentioning the S.Loc.If you are trying to do GR other than this storage location it will be giving the message that this material is not maintained in the specified S.Loc.
    In this way you are restricting particular material to particular S.Loc.
    Regards,
    Ramesh

  • Stock Transfer between Storage Location with Order

    Dear MM experts, 
    I am into SAP SD.
    Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
    But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
    Can you please suggest on how to achieve the above scenario.
    Thanks,
    Jignesh Mehta
    Mumbai

    hi
    Stock Transfer between Storage Locations
    u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
    u2022 As a result of which user can input issuing storage location with supplying plant.
    u2022 Facility of using different delivery types for different issuing storage locations is available.
    u2022 Shipping Point data can also be determined based on the issuing storage location.
    refer following
    http://sapfunctional.com/MM/StockTransfer/Configure.htm
    http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
    regards
    kunal

  • Allow a particular mvt type for a storage loc.

    hi,
    Is there a possibility to allow only a particular mvt type say 311 for a particular storage location.
    regards

    Dear you can restrict users to consume the stock from secondary storage locations by defining the main storage locations for raw materials in BOM components in item details in status/Lng.Txt so whenever you create production order manually or through planned oder the main storage location defulty copied so user can't change that location and insert secondary location.
    Check and Revert.
    Cheers
    KK

  • Restricting Material for particular Order type

    Dear Guru's,
    Is it possible to restrict particular material for particular order type in CO01.
    E.g. Material A is used in CO01 for order type X
           Material B is used in CO01 for order type Y
    I want to restrict CO01 should not allow production order creation of material A with order type Y.
    Regards
    Chandan.

    Hy,
    By the use of production scheduling profile you can set default order type for the required materials.But it doesn't restrict the other order type. During the manual order creation if user has select other order type then , there is no restriction.So as Mr. Shiva said put restriction over manual order creation, if possible.other option may be by using User Exit.
    Now in your case you want to restrict materials not material type. So it is quite complicated for Abaper to write code , because the for every new material Abaper has to change code.
    So there is one option by grouping perticuller materials under one production scheduler and then it is more convient for Abaper to create code for User Exit.
    Pls refer below thread which may give some more inputs  for your requirments.
    [Ugent: How to restrict a Material Type for a Specific Process Order Type;
    Regards,
    Dhaval

  • Transfer material from one storage location to another storage location

    Is there any bapi  to transfer material from one storage location to another storage location

    Hi,
    You need to use the below BAPI
    BAPI_GOODSMVT_CREATE
    Regards
    Sudheer

  • Extend the material for the storage location in mass.

    Hi,
    Can any genius let me know how can I extend the material for the storage location in mass.
    Currently our support team doing it by trx MMSC, but now we required to extend the materials for storage location in mass for which MMSC is to lengthily
    Is there any other way apart LSMW for MMSC.
    Regards,
    Shyamal.

    hi
    did u tried mass
    try this
    go to MASS
    then select BUS1001
    go to plant data for material  execute
    click on data records to be creatd
    then add material in field
    then select  select field button and add storage for extrenal procurement then there u will find on filed for external proc
    now do mass change
    reward if helpful
    regards
    kunal

  • Multiple receivng storage locations on Reservation (movement type 311)

    Hi
    We have a requirement where we create a reservation document either using BAPI or BDC (MB21). At the time of creation we require to maintain different receiving storage location on the reservation. Currently SAP allows to maintain receiving storage location on the header field RKPF - UMLGO only and then copies the same value on all line item field (RESB-UMLGO)..The line item field is not editable or set as I/O field therefore working on finding a user exit or BADI to update fields RESB - UMLGO in background. Has any one had this requirement and in case yes can you please advise how was this addressed.
    Thanks
    Lokesh

    Hi,
    If my understanding is correct. You want to transfer post a stock of material from one storage location to another ( IM perspective ) and from one bin to another bin belonging to different storage types but same plant ( WM perspective ).
    As this transfer posting does not involve any Sales order what is the logic behind the selection of movement type 311 E.
    I hope you can very well make use of 311 movement type for the transfer posting in IM which will lead to the generation of a PCN in the WM side. On confirming the same you will be able to do the reflection of Transfer posting in WM side also.
    I would suggest you to follow the above steps.
    1) First check the transfer posting 311 E which you have already completed a PCN in the background. If it is availble, just try to confirm the posting Change notice which will clear off the negative entry and a correponding postitive entry in the receiving storage type.
    2) In case if the system have not generated the PCN, then better to cancel the material docuemnt and re do the transfer posting to carry out the process from the start with the movement type 311 which will yield a PCN which can be confirmed to see the stock in the required storage type and in the respective bin accoring to the strategy set.
    Regards,

  • Material Stock at storage location for particular date!

    Dear Friend,
    I need a table or bapi which gives stock for particular storage location on particular day. That is MMBE and if you go into detail list (shift+f7). I want same thing.
    I have tried in MARD table, but it gives stock of a material for most current date.
    Waiting for your early Reply.
    Regards,
    Bhavin Shah

    hi check:
    MB_ADD_PURCHASE_ORDER_QUANTITY
    Regards
    Ashok P

  • Replenishment between Storage Location with MRP Planning

    Dear PP Gurus,
    I need you expertise on the below question.
    I have a plant with multiple Storage Locations. One Storage Location is Main Warehouse and another ilocation s External Warehouse (3PL) where excess stock are kept due to storage capacity in the Main Warehouse.
    Now the requirement is replenish the stock to Main Warehouse from the External Warehouse with Stock Transfer using MRP trigger the Stock Transfer.
    I know the setting in MRP 4 View in the material master, the Indicator to set to 2, maintain a reoder point in the Sloc: 1200 and Replenishment Qty: 1500 and Special Procurement Type: (what should be the setting)
    My question is where to set the target Sloc and source Sloc, then only system will trigger the replenishment Stock Transfer?
    The storage location which is plan separately, will have a different segment. Therefore, in terms of the availability check for the Sales Order it will consider as normal based on the scope of check.
    Appreciate the reply
    Thanks & Regards
    Pooja

    Dear ,
    1.You need  to set up the MRP for Plant with group of storage location  and run MRP-MD01 .You can try SCOPE of planning -OM0E.
    As an information : In standard MRP I, f you have several storage location for your plant, you cannot plan for them separately unless you assign them to a separate MRP area.If a storage location (alone) is assigned to an MRP area, it means you wan to plan for it separately. If several storage locations are assigned to an MRP area (or let's say to a plant), it means you want to plan using all of them - and you cannot choose only one and plan for it (you can exclude a SLoc from planning w/o assigning it to MRP area).
    2.Find steps for config for activating Sloc to Sloc transfer within plant using STO : -
    follow path: SPRO--> Materials Management -->Purchasing -->Purchase Order -->Set up Stock Transport Order -->Set Up Stock Transfer Between Storage Locations
    1. Activate Stock Transfer Between Storage Locations
    2. Assign Delivery Type and Checking Rule According to Storage Location
    purchase document category 'F' , here use PO type UB, supplying plant, issue sloc and delivery type , (prefer to create new delivery type by copying delivery type 'NL' replenish delivery
    3. Define Shipping Data for Stock Transfers Between Storage Locations
    for plant defind sales org and distribution chenal and devision
    select the pline and go to sloc
    assign there customer (created for sloc)
    4. Define Rule for Determination of Shipping Point
    for newly created delivery type set L storage location specific shiping poing determination
    5. Assign Shipping Points According to Storage Location, assign her sloc based shiping poing determination
    at last when you will create PO put issue storage location, system will determine shiping data based on config done.
    after this process will be same as STO plant to plant using shiping.
    You will need to mention the issuing storage location during posting the delivery,
    ie, ME21N - Create STO
    VL10B - Create Delivery
    VL02N - Post Goods issue - here you will need to mention the issuing storage location
    Refer : STO process -Std in SAP
    Hope it is clear to you .
    Regards
    JH
    Edited by: Jiaul Haque on Jul 7, 2010 10:23 AM

  • UD for a Material in HU-Storage location

    Hi Gurus,
    I have situation where Stock posting tab is not coming while doing the UD for a material
    Process flow is below:
    1. Creation/Release of Process - Inspection lot get created since early lot creation status REL CALC
    2. GR of Process Order is done in MIGO in Hu storage location
    3. Inbound Delivery is created (WM integration)
    4. Inbound Delivery is processed with TR creation/Confirmation
    5. Stock can be seen in Q under HU active storage location & Material document is created in IM . Inspection lot status is same
    6. Result recording is done against Lot Status INSP RREC
    7. While doing UD. Tab for Stock posting is missing. Status UD   ICCO CLAS STUP
    This inspection type has following settings: - tick post to insp stock, Insp with task list , early lot creation , auto UD etc
    Not sure what I am missing some settings since that is HU storage location
    Please guide
    Thanks,
    Ishwar

    Hi Yogini,
    Thanks for that .
    I tested as per suggestion but that is also not working basically no inspection lot is getting created for the GR after completion of WM transaction
    I have tested my senerio for non-HU storage location (doing GR in no-HU storage location ) & that works correctly . After UD i was able to see tab for stock posting & stock get posted successfully
    I think need expert advice who has work on QM-WM integration part ... can we able to post the stock from Quality stock from HU storage location to unrestricted use using only IM transaction ( QA11/12 ) or do i need to perform some additional steps in WM ?
    Thanks,
    Ishwar

  • Material transfer through storage location

    Dear Sir,
    Our company following process is incomplete, kindly correct us please if we are following wrong method:
    Current method
    1. We have two storage location one is 2101 (for production) and other is 2001(for warehouse).
    2. Whenever we receive the material GRN is been done in storage location 2001
    3. Then production people while doing packing plan, ask for material from storage location 2001 to 2101
    4. For this production people create reservation through mb21 and reservation number gets created.
    5. Then warehouse people transfer the material through mb1a through movement type 311
    Issues:
    1. Reservation list remains as it in mb25
    Solution required :
    1. How can warehouse people can transfer the material through generated reservation number so that reservation list can be closed.
    2. Or any other method if we are following some wrong system

    Is the manual reservation created for movement 311? and also, MB1A is for GI; MB1B is for transfer. Why are you using MB1A?
    Also, when they do MB1B are they referencing the reservation?

Maybe you are looking for

  • ITunes won't let me keep my album tracklists in the order that I want them

    Here's what I mean. The other day, I imported The stone Roses into iTunes using my friends CD. I couldn't import song 9 because the disc is heavily scratched and it won't copy. I bought the song online and imported it into iTunes. The problem is, it'

  • Help with filling a if statement

    hello everyone i hope someone can help me if you look at my code below the arraylist contains the number 8. but i want to know how i can use that number 8 inside the if statement (if (i%10 == 1)) where the number 1 is, so that number 1 will change to

  • How to store en-crypted  passwords in Oracle database.

    There are several user IDs for whom passwords are to be stored in database which are to be encrypted and there should be a function to compare the passwords entered with the passwords stored in the database . Could any one let me know how to do this

  • Compiling Nested Classes and Interfaces

    I am looking for documentation about compiling nested classes and interfaces. I have found something in the JVM Specification, but there does not explain how a nested class is compiled and what is included in the top level class to mark a "place hold

  • Can't open pdf's

    I can't open files on the website that I've gotten them from previously. Help! I really need them for work.  Two things I've changed recently:  1. One trusted website suggested getting Adobe Reader, which I did (version 11.0.03). 2. I upgraded from m