Issue migrating Notes into Yosemite

A few days ago I upgraded my MacBook's OS from Mavericks to Yosemite, and while just about everything data-wise migrated over without a problem, my Notes from the standard Notes app were deleted. I cannot seem to find a way to recover them, and they contain a few pieces of semi-important information I'd like to recover/keep if at all possible. I tried booting the oldest Mavericks version of Notes from my Time Machine backup into Yosemite, but I cannot since it's incompatible with Yosemite. Any attempts to find my data through other methods in Finder (Show Package Contents, etc.) were fruitless; is there anything I can do to fix this problem?

hello,
got same problem: Yosemete upgrade: lost my notes but I dont use icloud, no way to get back infos from time machine? am I lost? ;-)

Similar Messages

Can log into Yosemite server (4.0) VPN service with a Mavericks client, but not Yosemite client

Sever Info:
Yosemite Server 4.0 running on a late 2009 Mac Mini with 8 GB RAM with vpnd service enabled
The server was upgraded to Yosemite - not clean install - this may not matter (see below)
Airport extreme router with standard VPN UDP ports for L2TP forwarded to server (500, 1701, 4500)
Client info:
MB Air 13" early 2014 with 8 GB RAM
Yosemite
Mavericks 10.9.5 running as a Parallels virtual machine (don't ask - I need it to run an app for work that is not yet compatible with Yosemite)
OD service is NOT running - no VPN connections ever occurred from ANY client with this service running - OD is not needed in my case fortunately
With the OD service off, I can connect via the Mavericks virtual machine just fine, but not with Yosemite. With Yosemite, the ppp connection appears to occur, but server config requests appear to fall on deaf ears (client side doesn't appear to respond) until the connection times out. Can't figure out what triggers the client response to a server config request. Client side complains about no route to host and IP addresses don't get assigned to the connection.
The connection happens successfully in an eyeblink with the Mavericks client. Same username/password/shared secret in both instances.
Tried a generated .vpnconfig from the server, this also did not work.
It's possible that it is an auth problem, but can't figure out how the process occurs or what may be going wrong. There does not seem to be an obvious way to increase the granularity of the logging such that it might give other hints - at least that I can find. I found plenty of references to VPN issues when people upgraded from Mountain Lion to Mavericks as well as work arounds for this. I tried the most promising looking of those - no love. I reverted everything back to stock install since I could at least connect with Mavericks.
If log entries would be helpful, they are included below. I've stared at them long enough - perhaps a new set of eyes can provide a hint.
In addition, I can find no documentation regarding the VPN service in Yosemite server so as to get a clue as to whether there have been changes in racoon since Mavericks.
Thanks in advance for any suggestions. I would be glad to supply any other info needed for an accurate diagnosis .
Pat
==
Regarding the Yosemite client connection in the Yosemite server VPN Service log:
2014-10-21 12:18:30 MDT
Incoming call... Address given to client = 192.168.1.228
Tue Oct 21 12:18:30 2014 : Directory Services Authentication plugin initialized
Tue Oct 21 12:18:30 2014 : Directory Services Authorization plugin initialized
Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:18:30 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:18:30 2014 : L2TP incoming call in progress from 'my.dotted.quad.address'...
Tue Oct 21 12:18:30 2014 : L2TP received SCCRQ
Tue Oct 21 12:18:30 2014 : L2TP sent SCCRP
Tue Oct 21 12:18:30 2014 : L2TP received SCCCN
Tue Oct 21 12:18:30 2014 : L2TP received ICRQ
Tue Oct 21 12:18:30 2014 : L2TP sent ICRP
Tue Oct 21 12:18:30 2014 : L2TP received ICCN
Tue Oct 21 12:18:30 2014 : L2TP connection established.
Tue Oct 21 12:18:30 2014 : using link 0
Tue Oct 21 12:18:30 2014 : Using interface ppp0
Tue Oct 21 12:18:30 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 12:18:30 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:33 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:36 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:39 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:42 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:45 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:48 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:51 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:54 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:18:57 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x93542b1> <pcomp> <accomp>]
Tue Oct 21 12:19:00 2014 : LCP: timeout sending Config-Requests
Tue Oct 21 12:19:00 2014 : Connection terminated.
Tue Oct 21 12:19:00 2014 : L2TP disconnecting...
Tue Oct 21 12:19:00 2014 : L2TP sent CDN
Tue Oct 21 12:19:00 2014 : L2TP sent StopCCN
Tue Oct 21 12:19:00 2014 : L2TP disconnected
2014-10-21 12:19:00 MDT
   --> Client with address = 192.168.1.228 has hungup
==
Client side log for this connection using the Yosemite client:
Tue Oct 21 14:32:08 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 14:32:08 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 14:32:08 2014 : L2TP connecting to server 'myserver.com' (my.dotted.quad.address)...
Tue Oct 21 14:32:08 2014 : IPSec connection started
Tue Oct 21 14:32:09 2014 : IPSec connection established
Tue Oct 21 14:32:10 2014 : L2TP connection established.
Tue Oct 21 14:32:10 2014 : L2TP set port-mapping for en0, interface: 4, protocol: 0, privatePort: 0
Tue Oct 21 14:32:10 2014 : Using interface ppp0
Tue Oct 21 14:32:10 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 3fe4b3e8, Public Port: 0, TTL: 0.
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 4, Current interface 0
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 initialized. is Connected: 1, Previous publicAddress: (0), Current publicAddress 3fe4b3e8
Tue Oct 21 14:32:10 2014 : L2TP port-mapping for en0 fully initialized. Flagging up
Tue Oct 21 14:32:25 2014 : write: No route to host
Tue Oct 21 14:32:25 2014 : write: Host is down
Tue Oct 21 14:32:28 2014 : write: Host is down
Tue Oct 21 14:32:28 2014 : write: Host is down
Tue Oct 21 14:32:31 2014 : write: Host is down
Tue Oct 21 14:32:31 2014 : write: Host is down
Tue Oct 21 14:32:34 2014 : write: Host is down
Tue Oct 21 14:32:34 2014 : write: Host is down
Tue Oct 21 14:32:37 2014 : write: Host is down
Tue Oct 21 14:32:37 2014 : write: Host is down
Tue Oct 21 14:32:40 2014 : LCP: timeout sending Config-Requests
Tue Oct 21 14:32:40 2014 : Connection terminated.
Tue Oct 21 14:32:40 2014 : L2TP disconnecting...
Tue Oct 21 14:32:40 2014 : L2TP error sending CDN (Host is down)
Tue Oct 21 14:32:40 2014 : L2TP clearing port-mapping for en0
Tue Oct 21 14:32:40 2014 : L2TP disconnected
==
Pertinent client side log for connection of Mavericks client to Yosemite server:
Tue Oct 21 13:29:13 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 3fe4b3e8, Public Port: 0, TTL: 0.
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 4, Current interface 0
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 initialized. is Connected: 1, Previous publicAddress: (0), Current publicAddress 3fe4b3e8
Tue Oct 21 13:29:13 2014 : L2TP port-mapping for en0 fully initialized. Flagging up
Tue Oct 21 13:29:21 2014 : local IP address 192.168.1.229
Tue Oct 21 13:29:21 2014 : remote IP address 192.168.1.2
Tue Oct 21 13:29:21 2014 : primary   DNS address 192.168.1.2
Tue Oct 21 13:29:21 2014 : secondary DNS address 8.8.8.8
Tue Oct 21 13:29:21 2014 : l2tp_wait_input: Address added. previous interface setting (name: en0, address: 10.0.1.38), current interface setting (name: ppp0, family: PPP, address: 192.168.1.229, subnet: 255.255.255.0, destination: 192.168.1.2).
Tue Oct 21 13:29:21 2014 : Committed PPP store
Tue Oct 21 13:29:21 2014 : Committed PPP store
Tue Oct 21 13:52:32 2014 : [DISCONNECT]
Tue Oct 21 13:52:32 2014 : Hangup (SIGHUP)
Tue Oct 21 13:52:32 2014 : Connection terminated.
Tue Oct 21 13:52:32 2014 : Connect time 23.4 minutes.
Tue Oct 21 13:52:32 2014 : Sent 2674664 bytes, received 10680854 bytes.
Tue Oct 21 13:52:32 2014 : L2TP disconnecting...
Tue Oct 21 13:52:32 2014 : L2TP clearing port-mapping for en0
Tue Oct 21 13:52:32 2014 : L2TP disconnected
==
Regarding the Mavericks client connection in the Yosemite server VPN Service log:
2014-10-21 12:09:48 MDT Incoming call... Address given to client = 192.168.1.226
Tue Oct 21 12:09:48 2014 : Directory Services Authentication plugin initialized
Tue Oct 21 12:09:48 2014 : Directory Services Authorization plugin initialized
Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:09:48 2014 : publish_entry SCDSet() failed: Success!
Tue Oct 21 12:09:48 2014 : L2TP incoming call in progress from ‘my.dotted.quad.address’…
Tue Oct 21 12:09:48 2014 : L2TP received SCCRQ
Tue Oct 21 12:09:48 2014 : L2TP sent SCCRP
Tue Oct 21 12:09:48 2014 : L2TP received SCCCN
Tue Oct 21 12:09:48 2014 : L2TP received ICRQ
Tue Oct 21 12:09:48 2014 : L2TP sent ICRP
Tue Oct 21 12:09:49 2014 : L2TP received ICCN
Tue Oct 21 12:09:49 2014 : L2TP connection established.
Tue Oct 21 12:09:49 2014 : using link 0
Tue Oct 21 12:09:49 2014 : Using interface ppp0
Tue Oct 21 12:09:49 2014 : Connect: ppp0 <--> socket[34:18]
Tue Oct 21 12:09:49 2014 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x4bc40d9f> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x71598937> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : lcp_reqci: returning CONFACK.
Tue Oct 21 12:09:49 2014 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x71598937> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x4bc40d9f> <pcomp> <accomp>]
Tue Oct 21 12:09:49 2014 : sent [LCP EchoReq id=0x0 magic=0x4bc40d9f]
Tue Oct 21 12:09:49 2014 : sent [CHAP Challenge id=0x73 <074a110a5e0620296b1937345c34090e>, name = “myserver.private”]
Tue Oct 21 12:09:49 2014 : rcvd [LCP EchoReq id=0x0 magic=0x71598937]
Tue Oct 21 12:09:49 2014 : sent [LCP EchoRep id=0x0 magic=0x4bc40d9f]
Tue Oct 21 12:09:49 2014 : rcvd [LCP EchoRep id=0x0 magic=0x71598937]
Tue Oct 21 12:09:49 2014 : rcvd [CHAP Response id=0x73 <dfed1e41e1fb8c1132387c3d7792b1880000000000000000b2b163259cbe410aae792093680ba7 a89da3b46737c0d8d200>, name = "somelocaluser"]
Tue Oct 21 12:09:54 2014 : sent [CHAP Success id=0x73 "S=00EDB07933CE697641E2263A2A76386389512329 M=Access granted"]
Tue Oct 21 12:09:54 2014 : CHAP peer authentication succeeded for somelocaluser
Tue Oct 21 12:09:54 2014 : DSAccessControl plugin: User 'somelocaluser' authorized for access
Tue Oct 21 12:09:54 2014 : sent [IPCP ConfReq id=0x1 <addr 192.168.1.2>]
Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfReq id=0x1]
Tue Oct 21 12:09:54 2014 : rcvd [CHAP Response id=0x73 <dfed1e41e1fb8c1132387c3d7792b1880000000000000000b2b163259cbe410aae792093680ba7 a89da3b46737c0d8d200>, name = "somelocaluser"]
Tue Oct 21 12:09:54 2014 : sent [CHAP Success id=0x73 "S=00EDB07933CE697641E2263A2A76386389512329 M=Access granted"]
Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Tue Oct 21 12:09:54 2014 : ipcp: returning Configure-NAK
Tue Oct 21 12:09:54 2014 : sent [IPCP ConfNak id=0x1 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
Tue Oct 21 12:09:54 2014 : rcvd [IPV6CP ConfReq id=0x1 <addr fe80::021c:42ff:febf:bf66>]
Tue Oct 21 12:09:54 2014 : Unsupported protocol 0x8057 received
Tue Oct 21 12:09:54 2014 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 1c 42 ff fe bf bf 66]
Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfReq id=0x1 <route vers 16777216> <domain vers 16777216>]
Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfRej id=0x1 <route vers 16777216>]
Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfAck id=0x1 <addr 192.168.1.2>]
Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfAck id=0x1]
Tue Oct 21 12:09:54 2014 : rcvd [IPCP ConfReq id=0x2 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
Tue Oct 21 12:09:54 2014 : ipcp: returning Configure-ACK
Tue Oct 21 12:09:54 2014 : sent [IPCP ConfAck id=0x2 <addr 192.168.1.226> <ms-dns1 192.168.1.2> <ms-dns3 8.8.8.8>]
Tue Oct 21 12:09:54 2014 : ipcp: up
Tue Oct 21 12:09:54 2014 : found interface en0 for proxy arp
Tue Oct 21 12:09:54 2014 : local IP address 192.168.1.2
Tue Oct 21 12:09:54 2014 : remote IP address 192.168.1.226
Tue Oct 21 12:09:54 2014 : Received acsp/dhcp dictionaries
Tue Oct 21 12:09:54 2014 : Received acsp/dhcp dictionaries
Tue Oct 21 12:09:54 2014 : l2tp_wait_input: Address added. previous interface setting (name: en0, address: 192.168.1.2), current interface setting (name: ppp0, family: PPP, address: 192.168.1.2, subnet: 255.255.255.0, destination: 192.168.1.226).
Tue Oct 21 12:09:54 2014 : rcvd [ACSCP ConfReq id=0x2 <domain vers 16777216>]
Tue Oct 21 12:09:54 2014 : sent [ACSCP ConfAck id=0x2 <domain vers 16777216>]
Tue Oct 21 12:09:54 2014 : Received protocol dictionaries
Tue Oct 21 12:09:54 2014 : Committed PPP store
Tue Oct 21 12:09:54 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:09:54 2014 : rcvd [IP data <src addr 192.168.1.226> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
Tue Oct 21 12:09:54 2014 : sent [IP data <src addr 192.168.1.2> <dst addr 192.168.1.226> <BOOTP Reply> <type ACK> <server id 0xc0a80102> <domain name "local">]
Tue Oct 21 12:09:57 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:00 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:03 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:06 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:09 2014 : sent [ACSP data <payload len 24, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name private>
    <domain: name local>]
Tue Oct 21 12:10:09 2014 : rcvd [LCP TermReq id=0x2 "User request"]
Tue Oct 21 12:10:09 2014 : LCP terminated by peer (User request)
Tue Oct 21 12:10:09 2014 : ipcp: down
Tue Oct 21 12:10:09 2014 : sent [LCP TermAck id=0x2]
Tue Oct 21 12:10:09 2014 : l2tp_wait_input: Address deleted. previous interface setting (name: en0, address: 192.168.1.2), deleted interface setting (name: ppp0, family: PPP, address: 192.168.1.2, subnet: 255.255.255.0, destination: 192.168.1.226).
Tue Oct 21 12:10:09 2014 : L2TP received CDN
Tue Oct 21 12:10:09 2014 : Connection terminated.
Tue Oct 21 12:10:09 2014 : Connect time 0.4 minutes.
Tue Oct 21 12:10:09 2014 : Sent 1003 bytes, received 646 bytes.
Tue Oct 21 12:10:09 2014 : L2TP disconnecting...
Tue Oct 21 12:10:09 2014 : L2TP disconnected
2014-10-21 12:10:09 MDT   --> Client with address = 192.168.1.226 has hungup

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have an issue with Add to iTunes folder incorporating mp3s in iTunes Media folder, but not into my iTunes library.

I am using iTunes 10.5 on Windows 7 (64bit). This has only started happening since the 10.5 update. When I add mp3s to "Add to iTunes" folder, the mp3s will be added to a folder within the iTunes Media\Music\ directory, but the song will not show up in my iTunes library. If I open the mp3 from its location in the directory, it will open in iTunes and be included in the Library go forward. This issue is not consistent, it has happened the first time I tried to add an mp3, and not the second that I tried to add the exact same file. Oh also, I have always had the option selected to allow iTunes to keep the media folder organized.
For the time being I have to keep a list of everything I am adding and verify whether it shows up in the library. If it doesn't I have to run a search to see what exact directory path iTunes put it in, go there and open the file - frustrating and time consuming. Even more frustrating to me however is that I really don;t know if I have recovered all the added mp3s from before I recognized the problem.
Any ideas? I was wondering if there maybe was a way to have iTunes refresh its library from the folder?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

Mountian Lion does not recognize Yosemite in Start up disk

Greetings All,
I recently installed Yosemite on the partition of my HD (1TB) I ran Mavericks on.
On another partition of the same HD I run Mountian Lion (I use Pro Tools 9.06 on it).
When working within Mountain Lion, I used to switch to Mavericks (and vice versa) via System Preferences / Start up disk. Now Mountain Lion apparently does not recognize Yosemite as a bootable disk: in System Preferences / Start up disk Yosemite does not appear (as Mavericks used to do).
Does anyone know what's the cause of Yosemite not being available as Start up disk in System Preferences in Mountain Lion?
Kind regards,
Gerrit
MacBook Pro mid 2010
2.4 dual core intel cpu
1 TB HD; 3 partitions: Mountain Lion; Yosemite; Data
8 GB RAM

gerritfromnijmegen wrote:
...Another thing is a language issue: what you call the "media" line I can't translate with accuracy into Dutch. I guess it is called "Naam" (Name) in the second line of the information panel in Disk Utility and this says: Volume. I'm adding a screenshot here, maybe you'll be able to make out what what is by the way subjects are ordered in it?...
Your hard disk drive is shown divided up into three partitions: Mountain Lion, Yosemite, and the Data partition, all of which are indented in the list on the left in Disk Utility. The "media" on which the partitions exist (your Western Digital hard drive device, which is not indented), is shown in the traditional configuration we've known for years (so I apologize for introducing "Logical Volume Groups" to the discussion). It's been my experience that sometimes, installation of Yosemite will take the partition arrangement you have and convert it into a Logical Volume Group which becomes much more difficult to work with, and much, much more difficult to explain.

Exchange Co-existing Migration not completing (Event ID's 1006 - Mailbox Replication, 2002 - Exchange Migration)

Hi Guys,
a few issues all relating to AD/Exchange Setup, Causeing migration issues.
quick overview:
1. installed new server (Server 2012 R2), installed exchange 2013 install completed properly, issues logging into ecp and owa, ssl certs werent created, created manually didnt solve. - scrapped that server deleted from adsi exchange administration servers
(time spent troubleshooting was 5 days)
2. fixed ca issues, re-installed server installed exchange 2013, /preparead ,system mailboxes created migration mailbox created, create mailbox db, system mailboxes are there if checked with get-mailbox -arbitration
Try to migrate, migration mailbox not found in organization (accounts were there, made sure change user password on logon was not ticked on the account and never expire was ticked, account was disabled like it should be too so no go.
delete all system accounts from ad, recreate with /preparead, enable them according to articles:
http://technet.microsoft.com/en-us/library/gg588318%28v=exchg.150%29.aspx
http://www.telnetport25.com/2013/01/quick-tiprecovering-from-a-missing-migration-mailbox-in-exchange-2013/
http://social.technet.microsoft.com/wiki/contents/articles/5317.recreate-and-enable-missing-arbitration-user-accounts-and-mailboxes-in-exchange-server-2010.aspx
http://social.technet.microsoft.com/wiki/contents/articles/6874.how-to-recreate-system-mailbox-federatedemail-discoverysearchmailbox-in-exchange-2010.aspx
get-mailbox -arbitration found all mailboxes, check w/o -arbitration and discovery mailbox was there too.
3. Tried migration again no errors in ecp, migration not starting, encountered above error id's
Error 2002 - MSExchange Migration
error info ('Migration.MigrationMailboxNotFoundException|The migration mailbox for the organization is either missing or invalid.
Error 1006 - MSExchange Mailbox Replication (ps: no dag's setup yet either)
-> error info ('The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: CL1-3_Main-DB
same error for each db on the server with different mailboxes
Error: Couldn't find system mailbox '6d5f301b-7323-47c1-85eb-a76a01b9b3c0' in Active Directory.')
Error: Couldn't find system mailbox 'f6ba51f8-c076-42e9-b00f-014a1c6b3634' in Active Directory
Error: Couldn't find system mailbox 'SystemMailbox{eae9aad5-0984-440d-b37c-7a399961e171}' in Active Directory.
Error: Couldn't find system mailbox '8c6d0335-af32-41e3-86b1-e4c15fd14a23' in Active Directory.
SystemMailbox{eae9aad5-0984-440d-b37c-7a399961e171}' is in Active Directory and mail enabled according to above articles.
also received this error id 1006 - MSExchangeDiagnostics
error info ('The performance counter '\\CL1-3\LogicalDisk(HarddiskVolume17)\Free Megabytes' sustained a value of '207.00', for the '15' minute(s) interval starting at '8/22/2014 7:12:00 AM'. Additional information: None. Trigger Name:DatabaseDriveSpaceTrigger.
Instance:harddiskvolume17')
I don't want to reinstall again as i feel that would just add wood to the fire... can anyone help diagnose this?
been trying to fix this myself for over a month.
Thanks!!

Hi,
Even if you think re-installation is annoyed, I still suggest perform the re-installation.
Because fix this issue also annoyed.
Remove the Exchange server and use ADSIedit to clear it up.
Also remove the Windows server 2012 from AD.
Then re-install Windows server 2012 and Exchange 2013 server via articles from TechNet.
Thanks

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Security
and check the box marked
          Allow Plug-ins
Then click
          Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
          Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

FMS Audio (MP3) Glitches - Hosting Issue or Not

I've got several webinars that an associate of mine helped me
build several years ago in Flash MX 2004. They are about 40 minutes
long, but have been broken into about 8 chapters (seperate .swf
files). The .swf files connect to audio (mp3) streams running off
of an external hosted FMS server via RTMP. We are using the older
MediaDisplay and MediaPlayback components from MX 2004 to play the
audio while the screens within Flash are setup with cuepoints to
sync to the audio.
This has worked for years, except the problem is that the
chapters do not always seem to make the connection to the external
FMS audio. Sometimes simply pressing the pause button on and off
will get it to play. Other times you have to refresh the screen. I
can't figure out if this is a hosting issue or not. We have tried a
few different FMS hosts at this point at about the $100/month
plans, but keep having the same problems.
What can we do to eliminate (or diminish) these connection
problems? We really don't want to redevelop these at this point in
time, so if there is anything we can do to modify what we have or
our hosting, that would be helpful.
thanks,
route3w

It sounds like the swf doesn't handle onSync correctly. I
would suggest logging the connection event, stream events, etc to
gain more insight into the problem (both client side logging and
server side).

Issues importing photos into lightroom 5.6

Hello All, I would very much appreciate any assistance in figuring out my issue of not being able to import new photos after having used LR for years with almost 6000 photos in my LR catalogue. It looks like the images are coming in and then it gives me a number of the images (all of them) that are not able to import. I tried using a new, empty catalogue as well as importing my old photos into a new catalogue, and in both cases had the same problem. I am shooting with a Fuji XT1 both RAW and JPG and none of the images come in, yet they had been importing with no issue up until recently. I tried uploading the photos from a card reader, then I copied the images onto my desktop, tried that, and then I put the disc directly into the slot on my Macbook Pro, and it hasn't worked from any of those sources. The only thing that is different is that I recently purchased a new Apple thunderbolt monitor, but I disconnected that and tried to upload directly onto my Macbook Pro and it still wouldn't import the new photos. Could you kindly offer me any suggestions of what I might be able to do to remedy this situation? Thanks!

When I try to import my images, both RAW and jpeg from my Fujixt1, both from the card reader and directly from the slot on my computer, I initially see them as thubnails in Lightroom and it appeast like they are being imported, but after the import bar is finished, no lonager seeing any of the photos. then an error message comes up it also says: "could not copy files to the requested location" I have not had this problem when I had an earlier version of Lightroom. Any specific help in getting these files into Lightroom would be must appreciated. Is there an update that will help make this issue go away. It used to be so easy to just upload directly. Thanks!

Issues since update to yosemite

Hello everyone,
I've been having all sorts of issues since updating to yosemite which I am struggling to fix on my macbook.
I've had the mac since 2010/11 and the first thing I noticed after updating to Yosemite was the fan constantly running from the moment I boot the machine and that the icons on my desktop were extremely slow to load up as are any files in the documents folder and finder.
Then watching videos on youtube etc were refusing to play fully. I have since updated to the latest flash player but it is still slow.
I ran the activity monitor and a kernel task file is operating at around 120% all the time.
I have read numerous posts on the internet to try to fix and have upgraded to the latest yosemite, reset the printers and many other things.
Now the trackpad is no longer working and not recognised and now the final straw for me is the keyboard refusing to be recognised at startup. I am currently using a wired mouse and bluetooth keyboard to get around these problems and everything is working fine with these but is a real pain.
Has anyone had any similar problems to the above and know how to sort as this is taking up way too much of my time.
Thanks

What is the exact, complete text of the error message you get?

Migrate Notes from Exchange server 2007 to office 365

Hi,
Anyone help me to how to migrate notes from exchange server 2007 to office 365 . My customer having notes on his existing exchange account . We would like to move notes to office 365 .
Please help me or guide me .
Thanks & Regards,
Vinoth

The way you're doing it has two very high hurdles.
First, you have to get the data out of an offline server and into Office 365. That's hardly a trivial task. If the server were online and reachable by the Internet you could use a move request or a third-party tool like MigrationWiz.
Second, if you do get the mail moved, you will want to synchronize the legacyExchangeDN attribute from the old organization into an X500 proxy address in Office 365 for all mailboxes to preserve mail replyability.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Migrate COPA into BI7

Hi gurus,
I have implemented COPA but the data source in version 3.x. What would be the best way to migrate this into BI 7 version
Any way to migrate the transfer and update rule into transformation ?
Please advice
Thank you

Hi Sarvana,
Migration of COPA is not different then others.,
you need to follow below steps,
If the Dataflow is from Data source to DSO and DSO to Cube
1) Select DSO to Cube update rule and right click on
        update rule > additional function > create transformation
        This will copy and map all the objects with routine if exist and do
        the syntax check once before activation
2)Then select the transfer rule from Data source to
         DSO to do the same thing as above.
3) Then migrate the Data source , in   this always select the u2018with exportu2019 option which will enable to revert back to 3.x version .. If needed
4)If from one data source many targets are getting updated then use infosource
5) Create DTP for all
Regards,
Ashish

I am looking for an application that would allow me to open a word doc, and take notes in the .doc using a stylus pen. I'd then like to convert those notes to text, and then be able to copy / paste those notes into an email. Does this app exist?

I am looking for an application that would allow me to open a word doc, and take notes in the .doc using a stylus pen. I'd then like to convert those notes to text, and then be able to copy / paste those notes into an email. Does this app exist? It seems like we were doing these same types of things with Palm Pilots years ago, one would think this would work with iPads?

I don't believe it will open a Word document, but Writepad allows for handwritten conversion of notes to text and then to email. Might help you some of the way...

Transaction MB5B takes not into account the archived material documents

Transaction MB5B takes not into account the archived material documents . Is it possible?

Hi
It is not possible to see the archieved materials. Once archieved it will remove from the registry. Cannot be retrieve back.
Thanks
Ganesh

My wife's new iphone4 (a replacement for a 5 month-old iphone 4 with home button issues) is not recognized by itunes. Every other ios device in the house using that computer and Apple ID is. Any suggestions?

My wife's brand new iphone4 (which was a replacement for a 4month-old iphone4 with home button issues) is not recognized by itunes. Every other ios device on the computer/Apple ID in question is recognized and syncs perfectly. Any suggestions?

If the new phone has already been setup, make sure the phone and iTunes are both set to the same account.
You might also have to authorize this computer for the new device under the store menu.

Goods receipt and post goods issue are not updated back from EWM to ECC

Hi Experts,
Would anybody able to tell me the setting to be modified / defined to backward flow of information from EWM to ERP i.e. the goods receipt, goods issue are not being updated back in ECC once the goods receipt and post goods issue are posted in EWM?
It would be great help if i get the response as early as possible.
Chakrapani Das

Hi Chakrapani,
You might want to try checking the customization on the SCM part following this path:
SPRO - Extended Warehouse Management - Interfaces - ERP Integration - General Settings
Pay special attention on the Check of ERP-EWM Configuration transaction.
After you have checked these you should probably check the outbound queue monitor (tx SMQ1) from EWM to ERP. You can use the SMQ1 - Outbound queue and SMQ2 - Inbound Queue both in ERP and SCM to check the communication betweene these two systems.
Also you may want to checkt the SLG1 - Analyse application Log in SCM in order to see if any internal bugs exist.
All the best,
Claudiu Maxim

Issue migrating Notes into Yosemite

Similar Messages

Maybe you are looking for