Issue of Hierarchy when Replicating Materials ECC- CRM

Hello,
We are replicating materials from SAP ECC to SAP CRM, the material got replicated successfully however when I check the material in SAP CRM, the wrong hierarchy is getting assigned to the same(screen shot attached the hierarchy R3PRODSTYP gets assigned however the hierarchy R3PRODHIER needs to get assigned
Please advice, Product Hierarchies have been downloaded in SAP CRM using the relevant middle ware objects

I am attaching the screen shot below
An Earlier material got downloaded in the system correctly containing all 3 categories(screen shot attached below)
Kind Regards
Atul

Similar Messages

Error when replicating materials

Hi,
We are on SRM_SERVER 500 (SRM 5.0), Support pack SAPKIBKT06.
When replicating materials - we faced the following error.
In SMQ2 we get an error message - SYSFAIL - Error in Mapping (Details: transaction SMW01)
In SMW01 I am able to see some error messages -
No product ID determined for material number P2P SUPPLIES of logical system P2PCLNT100
But we have created the product P2P SUPPLIES in the R/3 system.
Can someone explain what needs to be done?
Thanks,
Srivatsan

Hi
Please go through the SAP OSS Notes ->
Note 656823 FAQ: Tips and tricks for transfer debugging
Note 1049166 Memory consumption in BDoc inbound processing too high
Note 916547 Problems with language fields in MDMP R/3 backend systems
Note 916708 Problems with language fields in MDMP R/3 back-end systems
Note 429423 CRM Release: General analysis of the initial Load
Note 928465 ISUCRM: Hanging entries in inbound queue SMQ2
Note 441352 OPEN-FI event 00501015 is executed unintentionally
Note 891889 ISUCRM: SYSFAIL during replication after product change
Note 721107 Correcting delivery and billing status in the CRM system
Note 510192 Meaning and maintenance of the CRMRFCPAR table
Note 537821 RFC dest. <ENTER MIDDLEWARE DESTINATION> does not exist
Note 543999 Assignment between adapter object and application component
Note 309734 CRM/EBP server: General analysis of initial load
Note 378580 incorrect sorting in SMO8_LOG_FLASH
Note 489215 CRM 3.0: Queues are blocked
Note 571486 After import of support packages: R3AD queues hang
Note 309734 CRM/EBP server: General analysis of initial load
Hope this will help. Do let me know.
Regards
- Atul

Bdoc error in SMW01 When Loading Materials into CRM

Hi,
We have recently done a system copy of our Production System to our Test System in R/3. We are now in the process of loading the Materials into our CRM 2007 Test System from the newly updated Test System in R/3.
However, when loading the objects into CRM we are getting the following BDoc errors in smw01:
Value X02 is not permitted for attribute Product Group 3 Value X02 - X09 is not permitted for attribute Product Group 3
Area: COM_PRCAT
Number: 20
We have loaded the object DNL_CUST_PROD1 prior to the load of the MATERIALS object
Does anyone know how this issue could be resolved?
Thanks,
Jonathan.

Hi, this error refers to tax customizing so you should check what assingments you have in R/3 and then replicated on CRM.
You can use transaction CRM_TAXCUST_VALIDATE to check the tax errors both in customers and materials.
Then, according to the missing entries you will see on the transaction I told, you shoul check in R/3 tables TSKM and TSTL (used for materials).
In table TSTL you have all the customizing made on R/3 transaction OVK1 and in table TSKM you´ll find the customizing made on transaction OVK4.
The entries made there for your country should be the same ones made in CRM. The customizing path is the following:
SPRO>CRM>Basic Functions>Taxes>Basic Settings>Tax Types and Tax Groups>Assing Tax Groups to SAP ECC Tax Classifications (Products)
Here you have to enter the combination of:
COUNTRYTAX TYPETAX GROUPTAX SEQTAx CL (which you should be able to fullfill after checking the R/3 tables I´ve told you..
Please let me know if it helps,
Regards,
Lorena

Does MV45AFZZ user exit trigger when CRM sales order is replicated into ECC

Hi All,
When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
I have requirement to code the logic during the process, when sales order is replicated into ECC.
So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
Please help me on this.

please check this link
keremgomi=wordpress=com
Rgds
Raj

Does MV45AFZZ trigger when CRM sales order is replicated into ECC

Hi All,
When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
I have requirement to code the logic during the process, when sales order is replicated into ECC.
So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
Please help me on this.

Hi,
I guess it should. Just put external break point (RFC userid with debuger rights) and see.
Thanks,
Nilesh P.

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

Modify vendor number when replicating vendor master data from ECC to SRM

Hi,
Is there a way to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
Does anyone have documentation on the user exit, how do I use it??
Thanks and Regards'
David

Hi David,
Please go through the link below:
[Enhancement SAPMF02K Vendor Master Data - question about LIFNR;
Regards
Anirban

Creation of new product hierarchy and products in SAP CRM.

Dear all,
please help with resolving of following issue:
In CRM system base hierarchies were replicated from R/3 system with materials. Current requirement is to create new materials in CRM directly (as standalone scenario). As far as I understand, I have to create new hierarchy with required list of set types in order to allow creation of products in CRM directly (product type = material). Can anybody describe changes in the system step by step, what should be changed and where?
As a result I need to have a possibility to create products in CRM directly for sales scenario processing.
Thank you in advance!

Hi Jorge,
thank you so much for your reply!
Here what I tried to do:
1. I created new category in hierarchy R3PRODSTYP, added 3 set types: COMM_PR_MAT, COMM_PR_SHTEXT, COMM_PR_UNIT as basic set types.
2. In the SPRO - Cross-Application Components - SAP Product - Settings for Product Type - Number Assignment - Define Number Ranges for the Product Type "Material" I found my new product category is unassigned, so I assigned it to the "CRM Products" group.
3. Farther I tried to create a new product for created category in CRM Web UI, but was not able to find it in the Base category search field. All categories correctly displayed from R3PRODSTYP, but my new category is absent. What can be the reason of category absence? Btw, it cannot be found even when I try to display whole hierarchy in Web UI, however, in SAP GUI, it can be seen via tcode comm_hierarchy.
Here is the setup of hierarchies in the system:
I have no idea how to check #3 "Ensure the hierarchy is assigned to CRM application".
Can you please suggest, what should be changed in addition? Thank you!

Limit PO price changes are not replicated to ECC backend

Hi all,
SRM 5.0 ECS SP13.
When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the field "VALUE" and "EXPECTED VALUE" have the changed/new value.
Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
SPOOL_JOB_USER     User that execueds spool job.     CUA_ADMIN
SPOOL_LEAD_INTERVAL     intervall by which the retrytime incr.     60
SPOOL_MAX_RETRY     Max. number of retrys for writing BAPIS     10
Can someone throw some pointers how to resolve the above issue.
Thanks in advance.

Hi
can you recreate the same issue
are you saying that
1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
or
1. limit sc
2. Limit PO
3. update not reached ECC.
Note 1284361 - Limits not transferred to backend purchase order
Symptom
Extended classic scenario.
You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order.

BI 7.0: Issue with Hierarchy for infoObject OPROD_HIER

Hi Gurus,
I have activated the Hierarchy datasource 0PROD_HIER_LPRH_HIER in ECC, tested with transaction RSA3 (456 node IDs) and replicated to BW.
In BW, the datasource has been assigned to the infosource OPROD_HIER ;
when I have created the infopachage, there is no Hierarchy available to select !!!!!!!!!
Please can you help with any solution : note, .....
Thanks in adavnce

Hi Mr V
I have clicked on "available Hierarchies from OLTP", but nothing appears above.
I don't understand what is wrong
Please an help is needed .....
Thanks
Edited by: Firmin Kouassi on Jul 26, 2009 9:24 AM

Is it possible to maintain customers in both ECC & CRM?

Hi,
We have ECC 6.0 as the leading system for creating customers and they replicate to CRM 5.0
But one certain group of customers alone will be created in CRM and replicated to ECC. These customers then have to be maintained in ECC and those changes have to flowback to CRM. I am guessing this is available in the standard functionality of SAP ECC & CRM (creating in one system and maintaining in another). Will there be any issues in doing this?
Can you guys foresee any problems in this method?
Thanks,
Max

Hi,
As long as the Number range used in both system is the same, there should be no problem in doing so....
Sharif

Delta Replication for Customizing object from ECC- CRM

I need help on delta replication activate for customizing objects from ECC to CRM. I finished with initial load with product replication and everything worked weel. The problem is that product hierarchy continuely changing in ECC everyday, so the delta for the products error out due to incorrect product heirarchy in CRM becuase the delta is not working for DNL_CUST_PROD0, and DNL_CUST_PROD1. Please show me how to activate the delta for those DNL. What business transaction do I need for those so the delta will work for them too? Rewards points if helpful

I think you need to do Request downlaod for the Product Hirearchy when ever there is new one created in ECC.You can do request downlaod by creating the object using R3AR2. Exeute the object though R3AR4 and monitor the status using R3AR3.

SAP Cloud for Customer & SAP ECC/CRM OnPremise integration using WebServices!

Hello All,
I would like to ask if anyone has really created a working integration scenario between a Cloud Solution & an ECC/CRM OnPremise solution?
We are trying to build some prototypes for this, however, due to connectivity errors/issues, unable to proceed.
I'm looking for information on:
> What certificates precisely are needed on both Cloud & OnPrem systems?
> What configuration if any is required on Cloud & OnPrem solution, except for communication system/arrangements on Cloud solution?
> Any use case if available from anyone which can demo integration between Cloud solution & ECC/CRM OnPremise solution.
I'd really appreciate responses on this.
Many Thanks
Ankur

Thanks Sathya for the response.
https://scn.sap.com/community/cloud/blog/2013/10/10/new-e-learning-for-i
ntegration-of-sap-cloud-for-customer-with-sap-erp-and-sa
p-crm-now-available : Not working! => Please check & confirm.
Just to give you our background...we are SAP Cloud Partners & VARs, hence we are building few prototypes for Customer Demos & POC.
Per my understanding, its just one of the OnPrem system, either an ECC OnPrem or CRM OnPrem that you can integrate with one C4C tenant at a time, i.e. to one single tenant. In our case, we are trying to integrate ECC OnPrem with C4C system.
We are in the process of deploying SAP PI as the middleware platform for integration between C4C & ECC/CRM OnPrem., which is going to take few more weeks.
SAP HCI will be the other approach, but we are currently not familiar with that, hence we have a trial to start in coming week for SAP HCI, so this is going to take some time as well.
Hence, WebService is the only currently available option for us to build these prototypes, POC for Customer Demos, to show working integration scenarios between ECC OnPrem & C4C system.
We have been facing some technical issues after setting up necessary communication systems/arrangements on C4C system & trying to do a WS call from SDK also we get error when we do a ping test from within C4C system to check connection.
Has SAP developed any WS integration between C4C & either of the ECC or CRM OnPrem system? Or is it just PI & HCI which SAP has for integration?
I'd truly appreciate if you can guide us on creating few integration scenarios (Working ones of course ) using Webservice between C4C & ECC OnPrem system.
Many Thanks
Ankur

Process IDocs with configureable materials in CRM

Dear all,
I'd like to place ORDERS IDoc into CRM that contain configureable materials using the R/3 ORDERS IDoc Mapping (SAP Library - R/3 ORDERS IDoc Mapping) (http://help.sap.com/saphelp_crm40/helpdata/en/6b/c4ca7dbeaf2743bf7efc61d7e677ef/content.htm ).
Unfortunately configureable materials are not supported in the standard mapping. Can anyone tell me, what work arounds I could use to achieve this? (the CRM sales orders are replicated into ECC later, where the VC is used for PP)
Thanks and best regards
Florian

Hello Amol,
You need to use the User Exit on R/3 side if you are appending Z* fields to the BAPI structure and in CRM ,in order to map these Z* fields you can check the PERFORM map_customer_Data in the mapper which is COM_MAP_BAPIMTCS_TO_PROD_MAT(in case of Product master) or
COM_MAP_BAPIMTCS_TO_PROD_IL (in case of BOM).
You also have BADI, PRODUCT_CUSTOMER2 , you can check the same in txn:SE18 for more details.
Hope this helps!
Best Regards,
Shanthala Kudva.

Error Occured while replicating to ECC

Hi There
I have created a RETURN Order in CRM 4.0. As per the process this order should get replicated to ECC. But i got the following error in CRM :
"An error has occurred in the system ECC while copying the document."
Now this order which is created in PRODUCTION server has to be processed further.
Kindly suggest.
Thanks and Regards
Dnyanesh

Dear Ashok,
I am also facing the same issue as my issue pertains the error "error has occured in the system( SYSTEM NUMBER)while copying the documentu201D .
Plz do needful support.
Best Reagrds

Issue of Hierarchy when Replicating Materials ECC- CRM

Similar Messages

Maybe you are looking for