Issue of TimeOut at the time of Playback-OFT

hi,
I had recorded one of our project application(which is in oracle). And at the time of Playback it got stuck and shows the message "Timeout after last event played" and showing the Elapsed Time as 120 sec.
From which setting this problem can get resolved?

Sanjay Desai wrote:
Hi Experts,
Which profiles we have to set at the time of creation of new responsibility in both - EBS 11i & R12 ?
regards
sanjayYou do not need to set any profile options when you create new responsibilities.
Please elaborate more on what responsibilities and profile options you are referring to.
Thanks,
Hussein

Similar Messages

  • I/O timeout all the time on console - what can I do with my hard drive? Macbook pro late 2011

    My macbook has been extremely slow for a while and after looking on this site I discovered I should look at the console - and noticed I had I/O timeouts all the time which I gather are a problem.
    What can I do with my hard drive? If I back it up using time machine and erase the disk with zeros will the problem continue if I simply restore from time machine?
    Or should I invest in a new hard drive - but if I buy a new hard drive is there something on my computer that will wreck that one as well? i use final cut pro/studio a lot and it's got to the stage where I can barely use it - do I need a 7200rpm hard drive? My current one is a 500gb 5400rpm.
    I have 16gb of RAM in but since upgrading this from 4GB it made a difference to the speed for all of two seconds then the computer returned to its normal slow speed.
    Would appreciate any help on this issue as I'm not particularly technical.

    I wouldn't worry too much about what the Console logs are showing... although I/O timeouts, if related to reading/writing to your disk may be a problem. I would have to see the whole Console message to know for certain...
    Your hard drive is sure to be slowing you down with FCP. Your best bet would be to upgrade to an SSD, if you can afford it. It's the only way you're going to see a real speed increase in FCP as so many large temp/cache files are written to the drive.
    If you can't afford a SSD, you may want to look at a 7200rpm SATA III drive (if your MBP supports SATA III - which model do you have? 2011 or later, I'm assuming, since you note that you've 16GB of RAM?).
    You should also update your OS to 10.7.5 if your profile reading of 10.7.2 is correct. Won't help speed, but will be more reliable -> http://support.apple.com/kb/DL1582.
    Clinton

  • How to calculate Goods issue date based on the time of delivery

    Hi SAP Gurus,
    I seek your help/suggestion for the given scenario.
    The user requires calculating the GI date based on time of delivery.
    Based on the delivery priority (like Priority 1= Day 1, Priority 2= Day 2) maintained in customer master, the need is something like below-
    1st case= If Retail Customeru2019s delivery orders received before midday (Noon cut off) require to be dispatched on same working day (Day 1)
    Wholesaler customer delivery orders received before midday require to be dispatched by the next
    Working day (Day 2 Including day of receipt)
    2nd case= Retail customeru2019s delivery orders received after midday require to be dispatched by the next working day
    Wholesaler customer delivery orders received after midday require to be dispatched by on day 3
    Kindly suggest , how to proceed in this. I am new to SAP world so need ur help to tackle this.
    Thanks a lot in advance for the valuable inputs.

    What I proposed to do was,
    a. Create routes like 0 day route, 1 Day route, 2 day route etc.
    b. Route determination is based on the Shipping condition of the customer. Put in the shipping condition for the customer as 00 - immediate delivery. 01 - By Truck, 02 - By Rail, 03 - Ship etc
    c. Now, put in your route determination in such a way that routes change in the sales order with shipping condition (SC). Like, if the shipping condition is set to 00, then 0 day route comes up. Meaning immediate delivery, if SC is 01, then your normal route by truck picks up. etc.
    When the sales order is manually created, you know the time of creation. As route is one of the criteria, the material confirmation happens based on number of days you put in the route to reach the destination. Now that you have the material available for today's delivery, the delivery program can be run to create it, or it can be manually created.
    Now, when you configure the route you have to specify 'Transit duration in calendar days'.
    When you have the sales order created electronically (say thru EDI), then, you may have to ask them to send in shipping condition. Else, you have to modify the function module Idoc_input_orders in such a way that if the sales order creation time is < 12 PM, then put shipping condition as 00, else copy what ever is there in the customer.
    If you do not want to check the time manually when the user creates the sales order, then you may have to use the user exit MV45AFZZ (and I think you can use Save_order_prepare) to check the time and change the shipping condition. By this you will avoid extra coding in Idoc_input_orders and also need not bother if the user changed the route or not.
    Hope my explanation helps.
    Regards,
    Mukund S

  • Has anyone else had issues with changing how the time and date look on the status menu in Mavericks?

    I'm trying to make it so the year displays, but haven't been able to figure out how to change that. I have the Day of the Week, Month, Day and Time only and I haven't been able to figure out how to do that in the Date & Time or the Language & Region Settings.

    There is no option in System Preferences. However, it may be possible to set it with a "defaults write" command.
    This page shows how to set the time and date format in the Terminal, but doesn't show whether you can add the year.
    http://apple.stackexchange.com/questions/75116/i-want-to-change-clock-from-12h-t o-24h-mode-via-terminal
    If you can find a description of Apple's date format code that includes the year, then it may be possible. Or not.
    I'm guessing Apple thinks only Time Travellers need to ask what year it is...

  • Strange powerpill error - aria2 timeouts all the time [SOLVED]

    Just installed Arch on a new machine and can't seem to get powerpill working.  I installed it and simply commented out the reflect -l 45 line in the /etc/powerpill.conf as I do on all my machines and I also uncommented the Aria2Clean.  When I try to d/l packages via powerpill -S package, I get timeout errors after a good 60 sec.  I'd post the whole output, but I have to type this from a pic of the screen!  The basic error looks like this:
    aria2: Exception [AbstractCommand.cc:184] Timeout.
    aria2: 2009-10-08 16:37:05.543453 ERROR -CUID#41 - Download aborted. URI=http://archlinux.umflint.edu/extra/os/x86...blahblah/path/to/package
    aria2: Exception [AbstractCommand.cc:184] Timeout.
    aria2: 2009-10-08 16:37:05.54367 ERROR -CUID#42 - Download aborted. URI=http://archlinux.umflint.edu/extra/os/x86...blahblah/path/to/package
    The network is up and works.  Pacman works, mirrorlist contains 15 servers that I ranked by speed.  Dunno what's up with powerpill.
    Here is the /etc/powerpill.conf
    [options]
    # Set the path to the aria2c binary.
    #Aria2Bin = /usr/bin/aria2c
    # Clean up leftover aria2 control files.
    Aria2Clean
    # Suppress aria2c output.
    #Aria2Silent
    # Powerpill will log output to this file if this
    # option is set.
    Log = /var/log/powerpill.log
    # Suppress colored output.
    #NoColor
    # Set the path to the pacman binary.
    # Change this to your preferred pacman binary,
    # e.g. pacman-color
    #PacmanBin = /usr/bin/pacman
    # Set the path to the pacman configuration file.
    # Change this if you want to use a custom configuration
    # with powerpill.
    #PacmanConf = /etc/pacman.conf
    # Use reflector at runtime to get the latest mirrors.
    # Depending on the reflector options that you use,
    # this may slow down the overall process while retrieving
    # the latest list, so use it wisely.
    #Reflect = -l 45
    # Set the number of times that powerpill will retry a
    # download if it fails. This only has an effect when
    # run with pacman's noconfirm option.
    #RetryLimit = 3
    # The minimum size a file must be for powerpill to
    # split the file for segmented downloading (in MB).
    #SplitSize = 5
    # aria2 options
    # These follow the same format as the aria2 config file.
    # Please refer to the aria2 documentation for more details
    # including a complete set of options (proxy settings etc).
    # Only the most relevant options have been included here.
    [aria2_options]
    # maximum number of concurrent downloads
    # This must be in the range 1-45. Powerpill sets it to 45
    # and configures the metalink to adjust the connections
    # per file.
    #max-concurrent-downloads=10
    # number of servers to connect to simultaneously
    # This only has a limiting effect. Leave it unset to
    # connect to the maximum number of servers allowed
    # by the settings in the metalink.
    #metalink-servers=20
    # Increasing these settings will lose more time while
    # waiting for unresponsive servers but decreasing them
    # will miss active servers and lose time while aria2
    # tries other servers.
    #timeout=5
    #max-tries=2
    #retry-wait=2
    # lowest acceptable connection speed (0 = disabled)
    # Downloads below this speed will be aborted.
    # The speed is given in bytes by default. Append "K"
    # or "M" for kilobytes or metabytes, resp.
    # (1M = 1024K = 1048576)
    #lowest-speed-limit=0
    # maximum total download speed (0 = disabled)
    # Use this to throttle the download.
    # The speed is given as for lowest-speed-limit above.
    #max-overall-download-limit=0
    # Be careful with this. Aria2 can quickly create huge
    # log files, depending on the log-level option.
    #log=/var/log/aria2.log
    # list pkgd-servers on your LAN here
    # they will be queried before remote servers
    #[PkgD]
    #Server = http://xxx.xxx.xxx.xxx:yyyyy/$repo
    # Here you can specify additional mirrors for powerpill.
    # The mirrors specified here will not be used by pacman
    # and thus the database will never be updated from them.
    # These sections follow the same syntax as pacman.conf.
    # Some of you will recognize this section as the heir
    # to the additional_mirrors.conf file. :)
    # Note that if you use the "reflect" option. there isn't
    # any reason to include reflector mirrorlists down here.
    #[core]
    # Server = http://example.com/arch/$repo/
    # Include = /path/to/mirrorlist
    #[extra]
    # Server = http://example.com/arch/$repo/
    # Include = /path/to/mirrorlist
    #[community]
    # Server = http://example.com/arch/$repo/
    # Include = /path/to/mirrorlist
    Last edited by graysky (2009-10-15 21:35:15)

    @Xyne - I uncommented the Log = /var/log/powerpill.log line as well as the aria2 line, and ran a powerpill -Syu which experienced the same timeouts.  Odd thing is that it never wrote a /var/log/powerpill.log at all.  I did get the aria2.log which I'll paste here:
    2009-10-15 15:12:07.698856 INFO - <<--- --- --- ---
    2009-10-15 15:12:07.698919 INFO - --- --- --- ---
    2009-10-15 15:12:07.698927 INFO - --- --- --- --->>
    2009-10-15 15:12:07.698934 INFO - aria2 1.6.2 x86_64-unknown-linux-gnu
    2009-10-15 15:12:07.698944 INFO - Logging started.
    2009-10-15 15:12:07.699568 INFO - Metalink: Queueing gzip-1.3.13-1-x86_64.pkg.tar.gz for download.
    2009-10-15 15:12:07.699628 INFO - Metalink: Queueing ghostscript-8.70-2-x86_64.pkg.tar.gz for download.
    2009-10-15 15:12:07.699662 INFO - Metalink: Queueing libcups-1.4.1-1-x86_64.pkg.tar.gz for download.
    2009-10-15 15:12:07.699696 INFO - Metalink: Queueing imagemagick-6.5.6.10-1-x86_64.pkg.tar.gz for download.
    2009-10-15 15:12:07.699728 INFO - Metalink: Queueing mlocate-0.22.2-1-x86_64.pkg.tar.gz for download.
    2009-10-15 15:12:07.699759 INFO - Metalink: Queueing cups-1.4.1-1-x86_64.pkg.tar.gz for download.
    2009-10-15 15:12:07.699792 INFO - Metalink: Queueing conky-1.7.2-4-x86_64.pkg.tar.gz for download.
    2009-10-15 15:12:07.791050 INFO - 142 certificate(s) were imported.
    2009-10-15 15:12:07.802027 INFO - The segment file /var/cache/pacman/pkg/gzip-1.3.13-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802062 DEBUG - Instantiating DirectDiskAdaptor
    2009-10-15 15:12:07.802086 INFO - The segment file /var/cache/pacman/pkg/gzip-1.3.13-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802099 INFO - The segment file /var/cache/pacman/pkg/gzip-1.3.13-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802111 INFO - The segment file /var/cache/pacman/pkg/gzip-1.3.13-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802294 INFO - The segment file /var/cache/pacman/pkg/ghostscript-8.70-2-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802315 DEBUG - Instantiating DirectDiskAdaptor
    2009-10-15 15:12:07.802331 INFO - The segment file /var/cache/pacman/pkg/ghostscript-8.70-2-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802344 INFO - The segment file /var/cache/pacman/pkg/ghostscript-8.70-2-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802356 INFO - The segment file /var/cache/pacman/pkg/ghostscript-8.70-2-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802434 INFO - The segment file /var/cache/pacman/pkg/libcups-1.4.1-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802451 DEBUG - Instantiating DirectDiskAdaptor
    2009-10-15 15:12:07.802467 INFO - The segment file /var/cache/pacman/pkg/libcups-1.4.1-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802479 INFO - The segment file /var/cache/pacman/pkg/libcups-1.4.1-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802490 INFO - The segment file /var/cache/pacman/pkg/libcups-1.4.1-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802560 INFO - The segment file /var/cache/pacman/pkg/imagemagick-6.5.6.10-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802577 DEBUG - Instantiating DirectDiskAdaptor
    2009-10-15 15:12:07.802593 INFO - The segment file /var/cache/pacman/pkg/imagemagick-6.5.6.10-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802605 INFO - The segment file /var/cache/pacman/pkg/imagemagick-6.5.6.10-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802617 INFO - The segment file /var/cache/pacman/pkg/imagemagick-6.5.6.10-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802771 INFO - The segment file /var/cache/pacman/pkg/mlocate-0.22.2-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802788 DEBUG - Instantiating DirectDiskAdaptor
    2009-10-15 15:12:07.802803 INFO - The segment file /var/cache/pacman/pkg/mlocate-0.22.2-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802815 INFO - The segment file /var/cache/pacman/pkg/mlocate-0.22.2-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.802827 INFO - The segment file /var/cache/pacman/pkg/mlocate-0.22.2-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.803075 INFO - The segment file /var/cache/pacman/pkg/cups-1.4.1-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.803100 DEBUG - Instantiating DirectDiskAdaptor
    2009-10-15 15:12:07.803115 INFO - The segment file /var/cache/pacman/pkg/cups-1.4.1-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.803127 INFO - The segment file /var/cache/pacman/pkg/cups-1.4.1-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.803139 INFO - The segment file /var/cache/pacman/pkg/cups-1.4.1-1-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.803208 INFO - The segment file /var/cache/pacman/pkg/conky-1.7.2-4-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.803225 DEBUG - Instantiating DirectDiskAdaptor
    2009-10-15 15:12:07.803240 INFO - The segment file /var/cache/pacman/pkg/conky-1.7.2-4-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.803252 INFO - The segment file /var/cache/pacman/pkg/conky-1.7.2-4-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.803264 INFO - The segment file /var/cache/pacman/pkg/conky-1.7.2-4-x86_64.pkg.tar.gz.aria2 does not exist.
    2009-10-15 15:12:07.803325 DEBUG - CUID#6 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.803346 DEBUG - usedPieces.size()=1
    2009-10-15 15:12:07.803354 DEBUG - Attach segment#0 to CUID#6.
    2009-10-15 15:12:07.803362 DEBUG - index=0, length=81683, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.803452 DEBUG - CUID#7 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.803463 DEBUG - usedPieces.size()=1
    2009-10-15 15:12:07.803471 DEBUG - Attach segment#0 to CUID#7.
    2009-10-15 15:12:07.803479 DEBUG - index=0, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.803548 DEBUG - CUID#8 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.803559 DEBUG - usedPieces.size()=2
    2009-10-15 15:12:07.803567 DEBUG - Attach segment#8 to CUID#8.
    2009-10-15 15:12:07.803575 DEBUG - index=8, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.803643 DEBUG - CUID#9 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.803655 DEBUG - usedPieces.size()=3
    2009-10-15 15:12:07.803663 DEBUG - Attach segment#4 to CUID#9.
    2009-10-15 15:12:07.803671 DEBUG - index=4, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.803736 DEBUG - CUID#10 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.803747 DEBUG - usedPieces.size()=4
    2009-10-15 15:12:07.803755 DEBUG - Attach segment#12 to CUID#10.
    2009-10-15 15:12:07.803763 DEBUG - index=12, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.803829 DEBUG - CUID#11 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.803841 DEBUG - usedPieces.size()=5
    2009-10-15 15:12:07.803849 DEBUG - Attach segment#2 to CUID#11.
    2009-10-15 15:12:07.803857 DEBUG - index=2, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.803922 DEBUG - CUID#12 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.803933 DEBUG - usedPieces.size()=6
    2009-10-15 15:12:07.803940 DEBUG - Attach segment#6 to CUID#12.
    2009-10-15 15:12:07.803948 DEBUG - index=6, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804015 DEBUG - CUID#13 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804026 DEBUG - usedPieces.size()=7
    2009-10-15 15:12:07.804033 DEBUG - Attach segment#10 to CUID#13.
    2009-10-15 15:12:07.804041 DEBUG - index=10, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804107 DEBUG - CUID#14 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804117 DEBUG - usedPieces.size()=8
    2009-10-15 15:12:07.804125 DEBUG - Attach segment#14 to CUID#14.
    2009-10-15 15:12:07.804132 DEBUG - index=14, length=232977, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804194 DEBUG - CUID#15 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804205 DEBUG - usedPieces.size()=9
    2009-10-15 15:12:07.804213 DEBUG - Attach segment#1 to CUID#15.
    2009-10-15 15:12:07.804221 DEBUG - index=1, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804278 DEBUG - CUID#16 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804294 DEBUG - usedPieces.size()=10
    2009-10-15 15:12:07.804302 DEBUG - Attach segment#3 to CUID#16.
    2009-10-15 15:12:07.804309 DEBUG - index=3, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804363 DEBUG - CUID#17 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804374 DEBUG - usedPieces.size()=11
    2009-10-15 15:12:07.804381 DEBUG - Attach segment#5 to CUID#17.
    2009-10-15 15:12:07.804389 DEBUG - index=5, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804438 DEBUG - CUID#18 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804449 DEBUG - usedPieces.size()=12
    2009-10-15 15:12:07.804456 DEBUG - Attach segment#7 to CUID#18.
    2009-10-15 15:12:07.804464 DEBUG - index=7, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804508 DEBUG - CUID#19 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804518 DEBUG - usedPieces.size()=13
    2009-10-15 15:12:07.804526 DEBUG - Attach segment#9 to CUID#19.
    2009-10-15 15:12:07.804534 DEBUG - index=9, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804574 DEBUG - CUID#20 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804585 DEBUG - usedPieces.size()=14
    2009-10-15 15:12:07.804593 DEBUG - Attach segment#11 to CUID#20.
    2009-10-15 15:12:07.804600 DEBUG - index=11, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804636 DEBUG - CUID#21 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804647 DEBUG - usedPieces.size()=15
    2009-10-15 15:12:07.804654 DEBUG - Attach segment#13 to CUID#21.
    2009-10-15 15:12:07.804662 DEBUG - index=13, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804694 DEBUG - CUID#22 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804704 DEBUG - usedPieces.size()=1
    2009-10-15 15:12:07.804712 DEBUG - Attach segment#0 to CUID#22.
    2009-10-15 15:12:07.804719 DEBUG - index=0, length=340204, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804810 DEBUG - CUID#23 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804822 DEBUG - usedPieces.size()=1
    2009-10-15 15:12:07.804830 DEBUG - Attach segment#0 to CUID#23.
    2009-10-15 15:12:07.804838 DEBUG - index=0, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.804909 DEBUG - CUID#24 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.804920 DEBUG - usedPieces.size()=1
    2009-10-15 15:12:07.804928 DEBUG - Attach segment#0 to CUID#24.
    2009-10-15 15:12:07.804935 DEBUG - index=0, length=78621, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.805008 DEBUG - CUID#25 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.805019 DEBUG - usedPieces.size()=1
    2009-10-15 15:12:07.805026 DEBUG - Attach segment#0 to CUID#25.
    2009-10-15 15:12:07.805034 DEBUG - index=0, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.805099 DEBUG - CUID#26 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.805109 DEBUG - usedPieces.size()=1
    2009-10-15 15:12:07.805117 DEBUG - Attach segment#0 to CUID#26.
    2009-10-15 15:12:07.805125 DEBUG - index=0, length=158585, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:07.805205 DEBUG - CUID#6 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.805932 INFO - CUID#6 - Resolving hostname mirrors.portafixe.com
    2009-10-15 15:12:07.814465 DEBUG - CUID#7 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.815151 INFO - CUID#7 - Resolving hostname mirror.csclub.uwaterloo.ca
    2009-10-15 15:12:07.823586 DEBUG - CUID#8 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.824281 INFO - CUID#8 - Resolving hostname distro.ibiblio.org
    2009-10-15 15:12:07.832669 DEBUG - CUID#9 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.833365 INFO - CUID#9 - Resolving hostname archlinux.unixheads.org
    2009-10-15 15:12:07.841856 DEBUG - CUID#10 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.842556 INFO - CUID#10 - Resolving hostname mirror.cs.vt.edu
    2009-10-15 15:12:07.850975 DEBUG - CUID#11 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.851673 INFO - CUID#11 - Resolving hostname schlunix.org
    2009-10-15 15:12:07.860109 DEBUG - CUID#12 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.860813 INFO - CUID#12 - Resolving hostname www.gtlib.gatech.edu
    2009-10-15 15:12:07.869447 DEBUG - CUID#13 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.870148 INFO - CUID#13 - Resolving hostname mirrors.hosef.org
    2009-10-15 15:12:07.878574 DEBUG - CUID#14 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.879279 INFO - CUID#14 - Resolving hostname mirrors.gigenet.com
    2009-10-15 15:12:07.887705 DEBUG - CUID#15 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.888406 INFO - CUID#15 - Resolving hostname mirror.archlinux.com.ve
    2009-10-15 15:12:07.897705 DEBUG - CUID#16 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.898410 INFO - CUID#16 - Resolving hostname archlinux.umflint.edu
    2009-10-15 15:12:07.906871 DEBUG - CUID#17 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.907577 INFO - CUID#17 - Resolving hostname mirror.rit.edu
    2009-10-15 15:12:07.916038 DEBUG - CUID#18 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.916740 INFO - CUID#18 - Resolving hostname locke.suu.edu
    2009-10-15 15:12:07.925167 DEBUG - CUID#19 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.925875 INFO - CUID#19 - Resolving hostname mirrors.easynews.com
    2009-10-15 15:12:07.934449 DEBUG - CUID#20 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.935197 INFO - CUID#20 - Resolving hostname mirror.umoss.org
    2009-10-15 15:12:07.943769 DEBUG - CUID#21 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.944474 INFO - CUID#21 - Resolving hostname mirrors.portafixe.com
    2009-10-15 15:12:07.952926 DEBUG - CUID#22 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.953632 INFO - CUID#22 - Resolving hostname mirrors.hosef.org
    2009-10-15 15:12:07.962115 DEBUG - CUID#23 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.962822 INFO - CUID#23 - Resolving hostname mirrors.hosef.org
    2009-10-15 15:12:07.971531 DEBUG - CUID#24 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.972244 INFO - CUID#24 - Resolving hostname mirror.csclub.uwaterloo.ca
    2009-10-15 15:12:07.980682 DEBUG - CUID#25 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.981389 INFO - CUID#25 - Resolving hostname mirror.csclub.uwaterloo.ca
    2009-10-15 15:12:07.989859 DEBUG - CUID#26 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.990561 INFO - CUID#26 - Resolving hostname archlinux.unixheads.org
    2009-10-15 15:12:07.999372 DEBUG - CUID#6 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.999385 DEBUG - CUID#7 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.999393 DEBUG - CUID#8 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.999401 DEBUG - CUID#9 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.999408 DEBUG - CUID#10 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.999416 DEBUG - CUID#11 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.999424 DEBUG - CUID#12 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.999431 DEBUG - CUID#13 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:07.999439 DEBUG - CUID#14 - socket: read:0, write:0, hup:0, err:0
    CUT
    2009-10-15 15:12:38.998886 DEBUG - ServerStat: set status ERROR for mirrors.portafixe.com (http)
    2009-10-15 15:12:38.998973 INFO - CUID#6 - Restarting the download. URI=http://mirrors.portafixe.com/archlinux/core/os/x86_64/gzip-1.3.13-1-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirrors.portafixe.com/archlinux/core/os/x86_64/gzip-1.3.13-1-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:38.998994 DEBUG - Memorized segment index=0, writtenLength=0
    2009-10-15 15:12:38.999004 DEBUG - CUID#6 - Pooling request URI=http://mirrors.portafixe.com/archlinux/core/os/x86_64/gzip-1.3.13-1-x86_64.pkg.tar.gz
    2009-10-15 15:12:38.999060 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:38.999103 DEBUG - CUID#7 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:38.999114 DEBUG - ServerStat: set status ERROR for mirror.csclub.uwaterloo.ca (http)
    2009-10-15 15:12:38.999134 INFO - CUID#7 - Restarting the download. URI=http://mirror.csclub.uwaterloo.ca/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirror.csclub.uwaterloo.ca/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:38.999155 DEBUG - Memorized segment index=0, writtenLength=0
    2009-10-15 15:12:38.999164 DEBUG - CUID#7 - Pooling request URI=http://mirror.csclub.uwaterloo.ca/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:38.999179 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:38.999212 DEBUG - CUID#8 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:38.999222 DEBUG - ServerStat: set status ERROR for distro.ibiblio.org (http)
    2009-10-15 15:12:38.999241 INFO - CUID#8 - Restarting the download. URI=http://distro.ibiblio.org/pub/linux/distributions/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://distro.ibiblio.org/pub/linux/distributions/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:38.999255 DEBUG - Memorized segment index=8, writtenLength=0
    2009-10-15 15:12:38.999264 DEBUG - CUID#8 - Pooling request URI=http://distro.ibiblio.org/pub/linux/distributions/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:38.999278 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:38.999311 DEBUG - CUID#9 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:38.999321 DEBUG - ServerStat: set status ERROR for archlinux.unixheads.org (http)
    2009-10-15 15:12:38.999340 INFO - CUID#9 - Restarting the download. URI=http://archlinux.unixheads.org/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://archlinux.unixheads.org/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:38.999354 DEBUG - Memorized segment index=4, writtenLength=0
    2009-10-15 15:12:38.999363 DEBUG - CUID#9 - Pooling request URI=http://archlinux.unixheads.org/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:38.999377 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:38.999409 DEBUG - CUID#10 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:38.999422 DEBUG - ServerStat: set status ERROR for mirror.cs.vt.edu (http)
    2009-10-15 15:12:38.999441 INFO - CUID#10 - Restarting the download. URI=http://mirror.cs.vt.edu/pub/ArchLinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirror.cs.vt.edu/pub/ArchLinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:38.999455 DEBUG - Memorized segment index=12, writtenLength=0
    2009-10-15 15:12:38.999464 DEBUG - CUID#10 - Pooling request URI=http://mirror.cs.vt.edu/pub/ArchLinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:38.999478 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:38.999510 DEBUG - CUID#11 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:38.999521 DEBUG - ServerStat: set status ERROR for schlunix.org (http)
    2009-10-15 15:12:38.999539 INFO - CUID#11 - Restarting the download. URI=http://schlunix.org/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://schlunix.org/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:38.999553 DEBUG - Memorized segment index=2, writtenLength=0
    2009-10-15 15:12:38.999562 DEBUG - CUID#11 - Pooling request URI=http://schlunix.org/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:38.999576 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:38.999608 DEBUG - CUID#12 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:38.999619 DEBUG - ServerStat: set status ERROR for www.gtlib.gatech.edu (http)
    2009-10-15 15:12:38.999637 INFO - CUID#12 - Restarting the download. URI=http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:38.999656 DEBUG - Memorized segment index=6, writtenLength=0
    2009-10-15 15:12:38.999665 DEBUG - CUID#12 - Pooling request URI=http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:38.999679 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:38.999711 DEBUG - CUID#13 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:38.999722 DEBUG - ServerStat: set status ERROR for mirrors.hosef.org (http)
    2009-10-15 15:12:38.999740 INFO - CUID#13 - Restarting the download. URI=http://mirrors.hosef.org/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirrors.hosef.org/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:38.999755 DEBUG - Memorized segment index=10, writtenLength=0
    2009-10-15 15:12:38.999763 DEBUG - CUID#13 - Pooling request URI=http://mirrors.hosef.org/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:38.999777 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:38.999809 DEBUG - CUID#14 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:38.999820 DEBUG - ServerStat: set status ERROR for mirrors.gigenet.com (http)
    2009-10-15 15:12:38.999839 INFO - CUID#14 - Restarting the download. URI=http://mirrors.gigenet.com/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirrors.gigenet.com/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:38.999853 DEBUG - Memorized segment index=14, writtenLength=0
    2009-10-15 15:12:38.999861 DEBUG - CUID#14 - Pooling request URI=http://mirrors.gigenet.com/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:38.999875 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:38.999907 DEBUG - CUID#15 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:38.999918 DEBUG - ServerStat: set status ERROR for mirror.archlinux.com.ve (http)
    2009-10-15 15:12:38.999936 INFO - CUID#15 - Restarting the download. URI=http://mirror.archlinux.com.ve/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirror.archlinux.com.ve/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:38.999951 DEBUG - Memorized segment index=1, writtenLength=0
    2009-10-15 15:12:38.999959 DEBUG - CUID#15 - Pooling request URI=http://mirror.archlinux.com.ve/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:38.999974 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.000006 DEBUG - CUID#16 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.000017 DEBUG - ServerStat: set status ERROR for archlinux.umflint.edu (http)
    2009-10-15 15:12:39.000036 INFO - CUID#16 - Restarting the download. URI=http://archlinux.umflint.edu/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://archlinux.umflint.edu/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.000050 DEBUG - Memorized segment index=3, writtenLength=0
    2009-10-15 15:12:39.000058 DEBUG - CUID#16 - Pooling request URI=http://archlinux.umflint.edu/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.000072 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.000104 DEBUG - CUID#17 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.000115 DEBUG - ServerStat: set status ERROR for mirror.rit.edu (http)
    2009-10-15 15:12:39.000138 INFO - CUID#17 - Restarting the download. URI=http://mirror.rit.edu/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirror.rit.edu/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.000153 DEBUG - Memorized segment index=5, writtenLength=0
    2009-10-15 15:12:39.000161 DEBUG - CUID#17 - Pooling request URI=http://mirror.rit.edu/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.000176 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.000208 DEBUG - CUID#18 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.000219 DEBUG - ServerStat: set status ERROR for locke.suu.edu (ftp)
    2009-10-15 15:12:39.000238 INFO - CUID#18 - Restarting the download. URI=ftp://locke.suu.edu/linux/dist/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=ftp://locke.suu.edu/linux/dist/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.000252 DEBUG - Memorized segment index=7, writtenLength=0
    2009-10-15 15:12:39.000260 DEBUG - CUID#18 - Pooling request URI=ftp://locke.suu.edu/linux/dist/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.000275 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.000307 DEBUG - CUID#19 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.000318 DEBUG - ServerStat: set status ERROR for mirrors.easynews.com (http)
    2009-10-15 15:12:39.000336 INFO - CUID#19 - Restarting the download. URI=http://mirrors.easynews.com/linux/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirrors.easynews.com/linux/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.000350 DEBUG - Memorized segment index=9, writtenLength=0
    2009-10-15 15:12:39.000359 DEBUG - CUID#19 - Pooling request URI=http://mirrors.easynews.com/linux/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.000373 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.000406 DEBUG - CUID#20 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.000417 DEBUG - ServerStat: set status ERROR for mirror.umoss.org (http)
    2009-10-15 15:12:39.000435 INFO - CUID#20 - Restarting the download. URI=http://mirror.umoss.org/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirror.umoss.org/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.000449 DEBUG - Memorized segment index=11, writtenLength=0
    2009-10-15 15:12:39.000458 DEBUG - CUID#20 - Pooling request URI=http://mirror.umoss.org/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.000472 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.000504 DEBUG - CUID#21 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.000514 DEBUG - ServerStat: set status ERROR for mirrors.portafixe.com (http)
    2009-10-15 15:12:39.000533 INFO - CUID#21 - Restarting the download. URI=http://mirrors.portafixe.com/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirrors.portafixe.com/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.000546 DEBUG - Memorized segment index=13, writtenLength=0
    2009-10-15 15:12:39.000555 DEBUG - CUID#21 - Pooling request URI=http://mirrors.portafixe.com/archlinux/extra/os/x86_64/ghostscript-8.70-2-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.000569 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.000601 DEBUG - CUID#22 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.000616 DEBUG - ServerStat: set status ERROR for mirrors.hosef.org (http)
    2009-10-15 15:12:39.000635 INFO - CUID#22 - Restarting the download. URI=http://mirrors.hosef.org/archlinux/extra/os/x86_64/libcups-1.4.1-1-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirrors.hosef.org/archlinux/extra/os/x86_64/libcups-1.4.1-1-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.000650 DEBUG - Memorized segment index=0, writtenLength=0
    2009-10-15 15:12:39.000658 DEBUG - CUID#22 - Pooling request URI=http://mirrors.hosef.org/archlinux/extra/os/x86_64/libcups-1.4.1-1-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.000672 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.000705 DEBUG - CUID#23 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.000715 DEBUG - ServerStat: set status ERROR for mirrors.hosef.org (http)
    2009-10-15 15:12:39.000733 INFO - CUID#23 - Restarting the download. URI=http://mirrors.hosef.org/archlinux/extra/os/x86_64/imagemagick-6.5.6.10-1-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirrors.hosef.org/archlinux/extra/os/x86_64/imagemagick-6.5.6.10-1-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.000748 DEBUG - Memorized segment index=0, writtenLength=0
    2009-10-15 15:12:39.000757 DEBUG - CUID#23 - Pooling request URI=http://mirrors.hosef.org/archlinux/extra/os/x86_64/imagemagick-6.5.6.10-1-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.000771 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.000804 DEBUG - CUID#24 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.000814 DEBUG - ServerStat: set status ERROR for mirror.csclub.uwaterloo.ca (http)
    2009-10-15 15:12:39.000832 INFO - CUID#24 - Restarting the download. URI=http://mirror.csclub.uwaterloo.ca/archlinux/core/os/x86_64/mlocate-0.22.2-1-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://mirror.csclub.uwaterloo.ca/archlinux/core/os/x86_64/mlocate-0.22.2-1-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.000847 DEBUG - Memorized segment index=0, writtenLength=0
    2009-10-15 15:12:39.000856 DEBUG - CUID#24 - Pooling request URI=http://mirror.csclub.uwaterloo.ca/archlinux/core/os/x86_64/mlocate-0.22.2-1-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.000870 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.000902 DEBUG - CUID#25 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.000913 DEBUG - ServerStat: set status ERROR for mirror.csclub.uwaterloo.ca (ftp)
    2009-10-15 15:12:39.000932 INFO - CUID#25 - Restarting the download. URI=ftp://mirror.csclub.uwaterloo.ca/archlinux/extra/os/x86_64/cups-1.4.1-1-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=ftp://mirror.csclub.uwaterloo.ca/archlinux/extra/os/x86_64/cups-1.4.1-1-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.000947 DEBUG - Memorized segment index=0, writtenLength=0
    2009-10-15 15:12:39.000955 DEBUG - CUID#25 - Pooling request URI=ftp://mirror.csclub.uwaterloo.ca/archlinux/extra/os/x86_64/cups-1.4.1-1-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.000970 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.001002 DEBUG - CUID#26 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001013 DEBUG - ServerStat: set status ERROR for archlinux.unixheads.org (http)
    2009-10-15 15:12:39.001031 INFO - CUID#26 - Restarting the download. URI=http://archlinux.unixheads.org/extra/os/x86_64/conky-1.7.2-4-x86_64.pkg.tar.gz
    Exception: [AbstractCommand.cc:207] URI=http://archlinux.unixheads.org/extra/os/x86_64/conky-1.7.2-4-x86_64.pkg.tar.gz
    -> [AbstractCommand.cc:184] Timeout.
    2009-10-15 15:12:39.001045 DEBUG - Memorized segment index=0, writtenLength=0
    2009-10-15 15:12:39.001054 DEBUG - CUID#26 - Pooling request URI=http://archlinux.unixheads.org/extra/os/x86_64/conky-1.7.2-4-x86_64.pkg.tar.gz
    2009-10-15 15:12:39.001068 DEBUG - Failed to delete socket event:No such file or directory
    2009-10-15 15:12:39.001113 DEBUG - CUID#6 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001124 DEBUG - Attach segment#0 to CUID#6.
    2009-10-15 15:12:39.001132 DEBUG - index=0, length=81683, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001140 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001156 DEBUG - CUID#7 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001165 DEBUG - Attach segment#0 to CUID#7.
    2009-10-15 15:12:39.001173 DEBUG - index=0, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001181 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001194 DEBUG - CUID#8 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001203 DEBUG - Attach segment#8 to CUID#8.
    2009-10-15 15:12:39.001210 DEBUG - index=8, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001218 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001230 DEBUG - CUID#9 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001239 DEBUG - Attach segment#4 to CUID#9.
    2009-10-15 15:12:39.001248 DEBUG - index=4, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001256 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001268 DEBUG - CUID#10 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001277 DEBUG - Attach segment#12 to CUID#10.
    2009-10-15 15:12:39.001285 DEBUG - index=12, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001292 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001304 DEBUG - CUID#11 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001313 DEBUG - Attach segment#2 to CUID#11.
    2009-10-15 15:12:39.001321 DEBUG - index=2, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001328 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001340 DEBUG - CUID#12 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001349 DEBUG - Attach segment#6 to CUID#12.
    2009-10-15 15:12:39.001357 DEBUG - index=6, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001364 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001376 DEBUG - CUID#13 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001385 DEBUG - Attach segment#10 to CUID#13.
    2009-10-15 15:12:39.001393 DEBUG - index=10, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001401 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001413 DEBUG - CUID#14 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001422 DEBUG - Attach segment#14 to CUID#14.
    2009-10-15 15:12:39.001430 DEBUG - index=14, length=232977, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001437 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001449 DEBUG - CUID#15 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001458 DEBUG - Attach segment#1 to CUID#15.
    2009-10-15 15:12:39.001466 DEBUG - index=1, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001474 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001485 DEBUG - CUID#16 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001495 DEBUG - Attach segment#3 to CUID#16.
    2009-10-15 15:12:39.001503 DEBUG - index=3, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001510 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001522 DEBUG - CUID#17 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001531 DEBUG - Attach segment#5 to CUID#17.
    2009-10-15 15:12:39.001539 DEBUG - index=5, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001547 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001558 DEBUG - CUID#18 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001568 DEBUG - Attach segment#7 to CUID#18.
    2009-10-15 15:12:39.001575 DEBUG - index=7, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001587 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001600 DEBUG - CUID#19 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001609 DEBUG - Attach segment#9 to CUID#19.
    2009-10-15 15:12:39.001617 DEBUG - index=9, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001624 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001636 DEBUG - CUID#20 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001646 DEBUG - Attach segment#11 to CUID#20.
    2009-10-15 15:12:39.001653 DEBUG - index=11, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001661 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001673 DEBUG - CUID#21 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001682 DEBUG - Attach segment#13 to CUID#21.
    2009-10-15 15:12:39.001690 DEBUG - index=13, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001697 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001709 DEBUG - CUID#22 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001718 DEBUG - Attach segment#0 to CUID#22.
    2009-10-15 15:12:39.001726 DEBUG - index=0, length=340204, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001734 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001747 DEBUG - CUID#23 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001757 DEBUG - Attach segment#0 to CUID#23.
    2009-10-15 15:12:39.001765 DEBUG - index=0, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001772 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001785 DEBUG - CUID#24 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001794 DEBUG - Attach segment#0 to CUID#24.
    2009-10-15 15:12:39.001802 DEBUG - index=0, length=78621, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001810 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001822 DEBUG - CUID#25 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001832 DEBUG - Attach segment#0 to CUID#25.
    2009-10-15 15:12:39.001840 DEBUG - index=0, length=1048576, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001847 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001859 DEBUG - CUID#26 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.001868 DEBUG - Attach segment#0 to CUID#26.
    2009-10-15 15:12:39.001876 DEBUG - index=0, length=158585, segmentLength=1048576, writtenLength=0
    2009-10-15 15:12:39.001884 DEBUG - writtenLength(in memo)=0, writtenLength=0
    2009-10-15 15:12:39.001899 DEBUG - CUID#6 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.002604 INFO - CUID#6 - Resolving hostname mirrors.portafixe.com
    2009-10-15 15:12:39.011495 DEBUG - CUID#7 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.012232 INFO - CUID#7 - Resolving hostname mirrors.portafixe.com
    2009-10-15 15:12:39.020712 DEBUG - CUID#8 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.021389 INFO - CUID#8 - Resolving hostname mirror.umoss.org
    2009-10-15 15:12:39.029941 DEBUG - CUID#9 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.030619 INFO - CUID#9 - Resolving hostname mirrors.easynews.com
    2009-10-15 15:12:39.039040 DEBUG - CUID#10 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.039740 INFO - CUID#10 - Resolving hostname locke.suu.edu
    2009-10-15 15:12:39.048147 DEBUG - CUID#11 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.048828 INFO - CUID#11 - Resolving hostname mirror.rit.edu
    2009-10-15 15:12:39.057230 DEBUG - CUID#12 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.057905 INFO - CUID#12 - Resolving hostname archlinux.umflint.edu
    2009-10-15 15:12:39.067026 DEBUG - CUID#13 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.067705 INFO - CUID#13 - Resolving hostname mirror.archlinux.com.ve
    2009-10-15 15:12:39.076226 DEBUG - CUID#14 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.076906 INFO - CUID#14 - Resolving hostname mirrors.gigenet.com
    2009-10-15 15:12:39.085296 DEBUG - CUID#15 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.085976 INFO - CUID#15 - Resolving hostname mirrors.hosef.org
    2009-10-15 15:12:39.094375 DEBUG - CUID#16 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.095050 INFO - CUID#16 - Resolving hostname www.gtlib.gatech.edu
    2009-10-15 15:12:39.103682 DEBUG - CUID#17 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.104356 INFO - CUID#17 - Resolving hostname schlunix.org
    2009-10-15 15:12:39.112824 DEBUG - CUID#18 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.113499 INFO - CUID#18 - Resolving hostname mirror.cs.vt.edu
    2009-10-15 15:12:39.121924 DEBUG - CUID#19 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.122605 INFO - CUID#19 - Resolving hostname archlinux.unixheads.org
    2009-10-15 15:12:39.131145 DEBUG - CUID#20 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.131819 INFO - CUID#20 - Resolving hostname distro.ibiblio.org
    2009-10-15 15:12:39.140220 DEBUG - CUID#21 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.140896 INFO - CUID#21 - Resolving hostname mirror.csclub.uwaterloo.ca
    2009-10-15 15:12:39.149422 DEBUG - CUID#22 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.150100 INFO - CUID#22 - Resolving hostname mirrors.hosef.org
    2009-10-15 15:12:39.158489 DEBUG - CUID#23 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.159171 INFO - CUID#23 - Resolving hostname mirrors.hosef.org
    2009-10-15 15:12:39.167543 DEBUG - CUID#24 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.168220 INFO - CUID#24 - Resolving hostname mirror.csclub.uwaterloo.ca
    2009-10-15 15:12:39.176608 DEBUG - CUID#25 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.177284 INFO - CUID#25 - Resolving hostname mirror.csclub.uwaterloo.ca
    2009-10-15 15:12:39.185681 DEBUG - CUID#26 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.186379 INFO - CUID#26 - Resolving hostname archlinux.unixheads.org
    2009-10-15 15:12:39.195091 DEBUG - CUID#6 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195104 DEBUG - CUID#7 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195112 DEBUG - CUID#8 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195120 DEBUG - CUID#9 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195127 DEBUG - CUID#10 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195135 DEBUG - CUID#11 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195142 DEBUG - CUID#12 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195150 DEBUG - CUID#13 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195157 DEBUG - CUID#14 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195165 DEBUG - CUID#15 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195173 DEBUG - CUID#16 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195180 DEBUG - CUID#17 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195188 DEBUG - CUID#18 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195196 DEBUG - CUID#19 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195204 DEBUG - CUID#20 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195211 DEBUG - CUID#21 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195219 DEBUG - CUID#22 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195226 DEBUG - CUID#23 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195234 DEBUG - CUID#24 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195242 DEBUG - CUID#25 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:39.195249 DEBUG - CUID#26 - socket: read:0, write:0, hup:0, err:0
    2009-10-15 15:12:40.192182 DEBUG - CUID#6 - socket: read:0, write:0, hup:0, err:0

  • I downloaded IOS 6 on both my iphone and ipad. Both are having severe wifi issues. Most of the time it will not connect.

    Since installing IOS 6 on both my iPhone 4 and iPad 2, my wifi only works sporadically. If I reboot, it will work a while. Definitely did not have a problem until IOS 6. This needs to be fixed promptly so that users are not charged more by their carriers for not using wifi.

    I for one at least am not experiencing Wi-Fi dropping on iOS 6.
    Try this..
    Tap Settings > General > Reset > Reset Network Settings
    You may need to enter your network password.
    Then restart the devices.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    And try turning off your router for about 5 minutes, turn it back on.

  • GI at the time of GR

    Hi,
    I have a requirement wherein, one particular component has to be Goods Issued automatically, only at the time of Goods Receipt of the Production order. What are the various ways / work around by which this can be acheived?
    Note: I don't want to use backflush, as GI happens at the time of order confirmation.
    Thanks.

    Hi Tao,
    Thanks for suggestion.
    In fact, in my process the GR happens in advance and the confirmations are entered later in the day (or next day).
    I am looking to GI one of the component at the time of GR and not at the time of confirmation.
    Regards.

  • Problem at the time of Implementing Text Matching Test Case in OFT

    hi,
    I had add Text Matching Test Case on login of the application for the username and password. and If the Test Case fail on that screen,then it should not allow to go further in the application.
    As currently at the time of Playback, it is allowing to go further and in the Result Report it display the case failed.

    Actually my ques is that suppose at the time of recording i enter the username as abcd and password as 123.
    When the recording is done . I Insert a Text Matching test case for both the username and password where i put the condition for the username that select text should be present as "def" . And the Test Case failed .
    So i want to know that if the test case failed on Login. Whether it should be move forward at the time of playback?

  • Error on entering the Time widget to display the current/left video duration time

    Working with Adobe Captivate 6.0 (Version 6.0.1.240) and trying to include an interactive video demonstrating possibilities and features of our software, I've experienced some issues.
    When entering the Time widget to display the current/left video duration time, Adobe Captivate is closed with the following error:
    [Window Title]
    Adobe Captivate
    [Main Instruction]
    "Adobe Captivate" has stopped working.
    [Content]
    Windows can check online for a solution to the problem.
    [^] Close details  [Check online for a solution to the problem and close the program] [Close the program] [Debug the program]
    The program works the same way when using other widgets such as ArrowWidget, AskAnExpert, Browser, CheckBoxes, Combobox, etc.
    What could be the most possible reason for that?

    Hello guys,
    thank you for trying to help me.
    to Lilybiri: I use the Timer widget included with Captivate 6, Version 6.0.1.240. That's why it doesn't show the time. Could you please tell me if it is possible to display the current/left video duration time? If so, how we can do that?
    to Vishhere: Yes, this is happening when I insert interactions or widgets from the Insert Menu. I reset the default preferences as you suggested. Unfortunately, it didn't help.
    When I go for inserting any interactive element or a widget from Insert/ Widget/Interactions the application is closed and an error message appears like the screenshot given here:

  • U410 won't POST 95% of the time

    I've already submitted my complaint about this to Lenovo technical support, but I want to see if anyone here has had a similar issue.
    95% of the time, my U410 will not POST at all. I turn the machine on, the fan spins up, the hard drive spins up, but the screen displays nothing. Keys don't seem to do anything either as the CAPSLOCK key doesn't light up after pressing it. I can hold power, power it down, try again, and it won't start again.
    The weird thing is, is that it does startup about 1 in 20 tries, or if it sits there for a long time plugged in. So it's not completely messed up.
    But once I go to shut it down, or even restart the machine, it will not restart correctly, and has to be shutdown by holding the power. Once I try to start it up again, no good.
    I thought it might be a software issue, so I formatted and reinstalled Windows 7 (was Ubuntu / Windows 8 before), but of course, once the machine had to restart to complete install... it's not starting up again. Doesn't make any sense.
    Is there a hard reset I am missing or any sort of secret way to reset the hardware to factory defaults (not the stupid one key solution)?

    Hi
    Could you please try a bios update from here
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073650
    When you next time successfully boot your machine?
    Regards
    Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
    If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

  • I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message:  [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

    I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message:  [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
    Never had any issues before now... any ideas?

    Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
    You'll have to setup the program again.
    cheers
    rob

  • LOTS of spinning wheels in Mountain Lion--multiple applications, ALL the time Sep 6, 2012 1:55 AM (in response to teacher24_70) Having the exact same issue. Also, on right click, many apps freeze/beachball and must force close

    LOTS of spinning wheels in Mountain Lion--multiple applications, ALL the time 
    Sep 6, 2012 1:55 AM (in response to teacher24_70)
    Having the exact same issue. Also, on right click, many apps freeze/beachball and must force close.  Additionally, uTorrent and Transmission are not operating correctly-uTorrent constantly beachballing and unresponsive.  Right-click freezes with everything from Word to iMovie. Takes way too much time to do anything, and lots of cursor freezing, here is a sys log excerpt:
    Sep  6 01:20:42 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:20:43 Matthews-MacBook-Pro-4.local Google Chrome[271]: Cannot find function pointer pluginFactory for factory 053918F4-2869-11D7-A671-000A27E2DB90 in CFBundle/CFPlugIn 0x808d2800 </Users/happymatt/Library/Contextual Menu Items/ToastIt.plugin> (not loaded)
    Sep  6 01:20:43 Matthews-MacBook-Pro-4.local Google Chrome[271]: Cannot find function pointer AntiCMPlugInFactory for factory E7083DE8-B37D-11D9-9B46-000D935563B0 in CFBundle/CFPlugIn 0x808d05b0 </Library/Contextual Menu Items/Antidote - MC.plugin> (not loaded)
    Sep  6 01:20:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:20:54 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:20:59 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 6.13 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:21:02 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:21:32 --- last message repeated 2 times ---
    Sep  6 01:21:32 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:21:40 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:21:42 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:21:47 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.50 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:21:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:22:23 --- last message repeated 2 times ---
    Sep  6 01:22:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:22:29 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:22:33 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:22:37 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.81 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:22:43 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:23:13 --- last message repeated 2 times ---
    Sep  6 01:23:13 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:23:19 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:23:22 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 3.61 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:23:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:23:53 --- last message repeated 2 times ---
    Sep  6 01:23:53 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:23:56 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:24:02 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 7.20 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:24:03 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:24:24 --- last message repeated 2 times ---
    Sep  6 01:24:24 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:24:27 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "Safari" after 4.25 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:24:33 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:24:59 --- last message repeated 2 times ---
    Sep  6 01:24:59 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:25:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:25:07 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.59 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:25:14 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:25:44 --- last message repeated 2 times ---
    Sep  6 01:25:44 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:25:44 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 1.24 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:25:44 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:26:14 --- last message repeated 2 times ---
    Sep  6 01:26:14 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:26:36 --- last message repeated 2 times ---
    Sep  6 01:26:36 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:26:42 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 7.22 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:26:44 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:27:06 --- last message repeated 2 times ---
    Sep  6 01:27:06 Matthews-MacBook-Pro-4.local purge[1528]: <CPPathUtils.c:526>          The device-file for this operating system, 'osx-12.1.0.xml', was not found. An attempt to revert to a previous revision of the OS device-file: 'osx-12.0.0.xml' has been made. Please file a Radar report with Apple, on the 'CoreProfile' component, version 'X'.
    Sep  6 01:27:20 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:27:21 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 4 seconds
    Sep  6 01:27:24 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 5.71 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:27:25 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:27:53 --- last message repeated 2 times ---
    Sep  6 01:27:53 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:27:55 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:28:00 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 7.22 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:28:05 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:28:25 --- last message repeated 1 time ---
    Sep  6 01:28:25 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:28:25 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:28:33 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.65 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:28:35 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:29:05 --- last message repeated 2 times ---
    Sep  6 01:29:05 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:29:08 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:29:16 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:29:22 Matthews-MacBook-Pro-4.local WindowServer[86]: disable_update_likely_unbalanced: UI updates still disabled by application "µTorrent" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
    Sep  6 01:29:24 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 17.09 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:29:26 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:29:56 --- last message repeated 2 times ---
    Sep  6 01:29:56 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:30:03 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
    Sep  6 01:30:06 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:30:12 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 9.74 seconds (server forcibly re-enabled them after 1.00 seconds)
    Sep  6 01:30:16 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:30:26 --- last message repeated 1 time ---
    Sep  6 01:30:26 Matthews-MacBook-Pro-4 com.apple.launchd.peruser.501[179] ([0x0-0x59059].com.apple.DiskUtility[769]): Exited: Killed: 9
    Sep  6 01:30:26 Matthews-MacBook-Pro-4 com.apple.launchd.peruser.501[179] ([0x0-0x1d01d].com.bittorrent.uTorrent[281]): Exited: Killed: 9
    Sep  6 01:30:33 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDeferSurfaces : Invalid source window 231
    Sep  6 01:30:33 Matthews-MacBook-Pro-4.local com.apple.ShareKitHelper[1266]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
    Sep  6 01:30:33 Matthews-MacBook-Pro-4.local com.apple.ShareKitHelper[1266]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
    Sep  6 01:30:33 Matthews-MacBook-Pro-4.local com.apple.ShareKitHelper[1266]: --warning: [ShareKit] Cancel UI for running services with Client PID: 1235
    Sep  6 01:30:36 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:30:43 Matthews-MacBook-Pro-4.local CVMServer[103]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
    Sep  6 01:30:44 Matthews-MacBook-Pro-4.local launchctl[1590]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    Sep  6 01:30:45 Matthews-MacBook-Pro-4.local CVMServer[103]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
    Sep  6 01:30:46 Matthews-MacBook-Pro-4 kernel[0]: Sandbox: sandboxd(1596) deny mach-lookup com.apple.coresymbolicationd
    Sep  6 01:30:46 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:30:47 Matthews-MacBook-Pro-4.local com.apple.quicklook.satellite[1591]: CFBundle 0x7f8ac3c87370 </Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component> (bundle, not loaded): bundle is not loadable: The bundle ‚ÄúFlip4Mac WMV Import‚Äù couldn‚Äôt be loaded because it is damaged or missing necessary resources.
    Sep  6 01:30:56 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:31:26 --- last message repeated 2 times ---
    Sep  6 01:31:26 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:31:57 --- last message repeated 2 times ---
    Sep  6 01:31:57 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:32:12 --- last message repeated 1 time ---
    Sep  6 01:32:12 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.apple.coremedia.videodecoder[1602]): Exit timeout elapsed (20 seconds). Killing
    Sep  6 01:32:17 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:32:47 --- last message repeated 2 times ---
    Sep  6 01:32:47 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:33:17 --- last message repeated 2 times ---
    Sep  6 01:33:17 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:33:47 --- last message repeated 2 times ---
    Sep  6 01:33:47 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:34:17 --- last message repeated 2 times ---
    Sep  6 01:34:17 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:34:48 --- last message repeated 2 times ---
    Sep  6 01:34:48 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:35:14 --- last message repeated 2 times ---
    Sep  6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Failed to return databaseID, encryption key is not loaded
    Sep  6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Incorrect password, failed to verify key [5057D5F949924084807D7C8DDB02E833]
    Sep  6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Incorrect password, failed to verify key [EF0ED6A834EA4FE8AE6CE569E06DEBDA]
    Sep  6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Not enough encryption keys found in [file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1Password%202.agi lekeychain/data/default/1password.keys]: 0. The master password entered incorrectly.
    Sep  6 01:35:15 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Failed to return databaseID, encryption key is not loaded
    Sep  6 01:35:18 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:35:19 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Failed to return databaseID, encryption key is not loaded
    Sep  6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage dissolveToPoint:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Sep  6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage dissolveToPoint:fromRect:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Sep  6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Sep  6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Sep  6 01:35:28 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:35:33 Matthews-MacBook-Pro-4.local CalendarAgent[997]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fdf6e3050a0 {AccountName=Google, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fdf6e3116f0 [0x7fff7579c190]>{type = immutable dict, count = 10,
              entries =>
                        0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7fdf6e311770 [0x7fff7579c190]>{contents = "nosniff"}
                        1 : Case Insensitive Key: Content-Type = <CFString 0x7fdf6e311740 [0x7fff7579c190]>{contents = "text/html; charset=UTF-8"}
                        2 : Case Insensitive Key: Server = <CFString 0x7fdf6e319f70 [0x7fff7579c190]>{contents = "GSE"}
                        3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff74a546b8 [0x7fff7579c190]>{contents = "Identity"}
                        6 : Case Insensitive Key: Date = <CFString 0x7fdf6e317fe0 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:34:55 GMT"}
                        7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7fdf6e318070 [0x7fff7579c190]>{contents = "SAMEORIGIN"}
                        8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7fdf6e319f50 [0x7fff7579c190]>{contents = "1; mode=block"}
                        9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fdf6e31d190 [0x7fff7579c190]>{contents = "BASIC realm="Google CalDAV""}
                        11 : Case Insensitive Key: Cache-Control = <CFString 0x7fdf6e318040 [0x7fff7579c190]>{contents = "private, max-age=0"}
                        12 : Case Insensitive Key: Expires = <CFString 0x7fdf6e318010 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:34:55 GMT"}
    Sep  6 01:35:38 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:35:54 --- last message repeated 1 time ---
    Sep  6 01:35:54 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: reloadAllObjects
    Sep  6 01:35:54 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Database (AGHtmlDatabase:file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1P assword%202.agilekeychain/) load time [Cache]: 0.016+0.000 (294 objects)
    Sep  6 01:35:56 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: reloadAllObjects
    Sep  6 01:35:56 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Database (AGHtmlDatabase:file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1P assword%202.agilekeychain/) load time [Cache]: 0.019+0.000 (294 objects)
    Sep  6 01:35:58 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:36:18 --- last message repeated 1 time ---
    Sep  6 01:36:18 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: reloadAllObjects
    Sep  6 01:36:18 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:36:18 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Database (AGHtmlDatabase:file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1P assword%202.agilekeychain/) load time [Cache]: 0.015+0.000 (294 objects)
    Sep  6 01:36:28 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:36:59 --- last message repeated 2 times ---
    Sep  6 01:36:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:37:29 --- last message repeated 2 times ---
    Sep  6 01:37:29 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:37:59 --- last message repeated 2 times ---
    Sep  6 01:37:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:38:29 --- last message repeated 2 times ---
    Sep  6 01:38:29 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:38:59 --- last message repeated 2 times ---
    Sep  6 01:38:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:39:30 --- last message repeated 2 times ---
    Sep  6 01:39:30 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:40:00 --- last message repeated 2 times ---
    Sep  6 01:40:00 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:40:30 --- last message repeated 2 times ---
    Sep  6 01:40:30 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:40:48 --- last message repeated 1 time ---
    Sep  6 01:40:48 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1771[GoogleSoftwareUp] clearing CS_VALID
    Sep  6 01:40:50 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
                        com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
                        com.google.Keystone.Daemon.Administration: 0 connection(s)
    Sep  6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
    Sep  6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
    Sep  6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
                        <KSTicket:0x253390
                                  productID=com.google.Keystone
                                  version=1.1.0.3659
                                  xc=<KSPathExistenceChecker:0x253740 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
                                  serverType=Omaha
                                  url=https://tools.google.com/service/update2
                                  creationDate=2012-08-18 11:28:06
                        >
              Using server: <KSOmahaServer:0x2583a0
                        engine=<KSDaemonUpdateEngine:0x2044530>
                        params={
                                  EngineVersion = "1.1.0.3659";
                                  ActivesInfo = {
                                            "com.google.Keystone" = {
                                                      LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActivePingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActiveDate = 2012-09-06 08:40:51 +0000;
                                            "com.google.Chrome" = {
                                                      LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActivePingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActiveDate = 2012-09-06 07:42:15 +0000;
                                            "com.google.GoogleDrive" = {
                                                      LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActiveDate = 2012-08-31 00:45:54 +0000;
                                                      LastActivePingDate = 2012-08-31 07:00:30 +0000;
                                            "com.google.talkplugin" = {
                                                      LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActivePingDate = 2012-08-22 07:00:12 +0000;
                                                      LastActiveDate = 2012-08-22 02:55:20 +0000;
                                  UserInitiated = 0;
                                  IsSystem = 1;
                                  OmahaOSVersion = "10.8.1_i486";
                                  Identity = KeystoneDaemon;
                                  AllowedSubdomains = (
                                            ".omaha.sandbox.google.com",
                                            ".tools.google.com",
                                            ".www.google.com",
                                            ".corp.google.com"
              >
    Sep  6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x259c40
                        server=<KSOmahaServer:0x2583a0>
                        url="https://tools.google.com/service/update2"
                        runningFetchers=0
                        tickets=1
                        activeTickets=0
                        rollCallTickets=0
                        body=
                                  <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
                                  <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
                                      <o:os platform="mac" version="MacOSX" sp="10.8.1_i486"></o:os>
                                      <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="18" brand="GGLG">
                                          <o:updatecheck></o:updatecheck>
                                      </o:app>
                                  </o:gupdate>
              >
    Sep  6 01:40:51 Matthews-MacBook-Pro-4.local launchctl[1776]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    Sep  6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x45437b0
                        server=<KSOmahaServer:0x2583a0>
                        url="https://tools.google.com/service/update2"
                        status=200
                        tickets=1
                        activeTickets=0
                        rollCallTickets=0
                        data=
                                  <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
                                  <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
                                      <daystart elapsed_seconds="6017"></daystart>
                                      <app appid="com.google.Keystone" status="ok">
                                          <updatecheck status="noupdate"></updatecheck>
                                      </app>
                                  </gupdate>
              >
    Sep  6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
    Sep  6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
    Sep  6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
    Sep  6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
    Sep  6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
    Sep  6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
    Sep  6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
    Sep  6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
                        <KSTicket:0x2643870
                                  productID=com.google.talkplugin
                                  version=3.5.1.8982
                                  xc=<KSPathExistenceChecker:0x2643740 path=/Library/Application Support/Google/GoogleTalkPlugin.app>
                                  serverType=Omaha
                                  url=https://tools.google.com/service/update2
                                  creationDate=2012-08-18 11:28:07
                        >,
                        <KSTicket:0x2643480
                                  productID=com.google.Keystone
                                  version=1.1.0.3659
                                  xc=<KSPathExistenceChecker:0x2642ec0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
                                  serverType=Omaha
                                  url=https://tools.google.com/service/update2
                                  creationDate=2012-08-18 11:28:06
                        >
              Using server: <KSOmahaServer:0x204c0e0
                        engine=<KSDaemonUpdateEngine:0x2044530>
                        params={
                                  EngineVersion = "1.1.0.3659";
                                  ActivesInfo = {
                                            "com.google.Keystone" = {
                                                      LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActivePingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActiveDate = 2012-09-06 08:40:51 +0000;
                                            "com.google.Chrome" = {
                                                      LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActivePingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActiveDate = 2012-09-06 07:42:15 +0000;
                                            "com.google.GoogleDrive" = {
                                                      LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActiveDate = 2012-08-31 00:45:54 +0000;
                                                      LastActivePingDate = 2012-08-31 07:00:30 +0000;
                                            "com.google.talkplugin" = {
                                                      LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
                                                      LastActivePingDate = 2012-08-22 07:00:12 +0000;
                                                      LastActiveDate = 2012-08-22 02:55:20 +0000;
                                  UserInitiated = 0;
                                  IsSystem = 1;
                                  OmahaOSVersion = "10.8.1_i486";
                                  Identity = KeystoneDaemon;
                                  AllowedSubdomains = (
                                            ".omaha.sandbox.google.com",
                                            ".tools.google.com",
                                            ".www.google.com",
                                            ".corp.google.com"
              >
    Sep  6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x2047910
                        server=<KSOmahaServer:0x204c0e0>
                        url="https://tools.google.com/service/update2"
                        runningFetchers=0
                        tickets=2
                        activeTickets=0
                        rollCallTickets=0
                        body=
                                  <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
                                  <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
                                      <o:os platform="mac" version="MacOSX" sp="10.8.1_i486"></o:os>
                                      <o:app appid="com.google.talkplugin" version="3.5.1.8982" lang="en-us" installage="18" brand="GGLG">
                                          <o:updatecheck></o:updatecheck>
                                      </o:app>
                                      <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="18" brand="GGLG">
                                          <o:updatecheck></o:updatecheck>
                                      </o:app>
                                  </o:gupdate>
              >
    Sep  6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x257570
                        server=<KSOmahaServer:0x204c0e0>
                        url="https://tools.google.com/service/update2"
                        status=200
                        tickets=2
                        activeTickets=0
                        rollCallTickets=0
                        data=
                                  <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
                                  <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
                                      <daystart elapsed_seconds="6018"></daystart>
                                      <app appid="com.google.talkplugin" status="ok">
                                          <updatecheck status="noupdate"></updatecheck>
                                      </app>
                                      <app appid="com.google.Keystone" status="ok">
                                          <updatecheck status="noupdate"></updatecheck>
                                      </app>
                                  </gupdate>
              >
    Sep  6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
    Sep  6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
    Sep  6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
    Sep  6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
    Sep  6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
    Sep  6 01:40:59 Matthews-MacBook-Pro-4.local KernelEventAgent[57]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
    Sep  6 01:40:59 Matthews-MacBook-Pro-4 kernel[0]: HFS: Vol: Google Chrome 21.0.1180.82-21.0.1180.89 Update Very Low Disk: freeblks: 0, dangerlimit: 12
    Sep  6 01:40:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 1 seconds
    Sep  6 01:41:00 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:41:01 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1804[ksadmin] clearing CS_VALID
    Sep  6 01:41:01 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1807[ksadmin] clearing CS_VALID
    Sep  6 01:41:01 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1809[ksadmin] clearing CS_VALID
    Sep  6 01:41:02 Matthews-MacBook-Pro-4.local defaults[1813]:
              The domain/default pair of (/Applications/Google Chrome.app/Contents/Info, KSBrandID) does not exist
    Sep  6 01:41:10 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:41:11 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
                        com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
                        com.google.Keystone.Daemon.Administration: 0 connection(s)
    Sep  6 01:41:20 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:41:21 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
    Sep  6 01:41:30 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:42:01 --- last message repeated 2 times ---
    Sep  6 01:42:01 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:42:05 Matthews-MacBook-Pro-4.local purge[2045]: <CPPathUtils.c:526>          The device-file for this operating system, 'osx-12.1.0.xml', was not found. An attempt to revert to a previous revision of the OS device-file: 'osx-12.0.0.xml' has been made. Please file a Radar report with Apple, on the 'CoreProfile' component, version 'X'.
    Sep  6 01:42:20 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 2 seconds
    Sep  6 01:42:22 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:42:52 --- last message repeated 2 times ---
    Sep  6 01:42:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:43:22 --- last message repeated 2 times ---
    Sep  6 01:43:22 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:43:52 --- last message repeated 2 times ---
    Sep  6 01:43:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:44:23 --- last message repeated 2 times ---
    Sep  6 01:44:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:44:53 --- last message repeated 2 times ---
    Sep  6 01:44:53 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:45:23 --- last message repeated 2 times ---
    Sep  6 01:45:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:45:53 --- last message repeated 2 times ---
    Sep  6 01:45:53 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:46:23 --- last message repeated 2 times ---
    Sep  6 01:46:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:46:54 --- last message repeated 2 times ---
    Sep  6 01:46:54 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage dissolveToPoint:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Sep  6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage dissolveToPoint:fromRect:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Sep  6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Sep  6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Sep  6 01:47:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:47:34 --- last message repeated 2 times ---
    Sep  6 01:47:34 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:48:04 --- last message repeated 2 times ---
    Sep  6 01:48:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:48:34 --- last message repeated 2 times ---
    Sep  6 01:48:34 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:49:04 --- last message repeated 2 times ---
    Sep  6 01:49:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:49:30 --- last message repeated 2 times ---
    Sep  6 01:49:30 Matthews-MacBook-Pro-4.local Dock[197]: Unable to open IOHIDSystem (e00002bd)
    Sep  6 01:49:30 Matthews-MacBook-Pro-4 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    Sep  6 01:49:30 Matthews-MacBook-Pro-4.local Dock[197]: CGSSetWindowTransformAtPlacement: Singular matrix [inf 0.000 0.000 inf]
    Sep  6 01:49:31 Matthews-MacBook-Pro-4.local usernoted[220]: Cannot find originating application to launch for event action.  file://localhost/Applications/Postbox.app/ is not the same app as the one that sent the original notification.
    Sep  6 01:49:31 Matthews-MacBook-Pro-4.local usernoted[220]: Error finding application com.postbox-inc.postbox.
    Sep  6 01:49:34 Matthews-MacBook-Pro-4.local DashboardClient[2154]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Sep  6 01:49:34 Matthews-MacBook-Pro-4.local DashboardClient[2154]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    Sep  6 01:49:35 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:49:46 --- last message repeated 1 time ---
    Sep  6 01:49:46 Matthews-MacBook-Pro-4.local Google Chrome Helper[2162]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
    Sep  6 01:49:48 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXSetWindowListTags: Modification of (unknown tag) (45) on a window 0x17 requiring rights kCGSWindowRightOwner by caller Dashboard
    Sep  6 01:49:49 Matthews-MacBook-Pro-4.local Google Chrome Helper[2162]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
    Sep  6 01:49:55 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:50:10 --- last message repeated 1 time ---
    Sep  6 01:50:10 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXSetWindowListTags: Modification of (unknown tag) (45) on a window 0x13 requiring rights kCGSWindowRightOwner by caller Dashboard
    Sep  6 01:50:10 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXSetWindowListTags: Modification of (unknown tag) (45) on a window 0x15 requiring rights kCGSWindowRightOwner by caller Dashboard
    Sep  6 01:50:15 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:50:32 --- last message repeated 1 time ---
    Sep  6 01:50:32 Matthews-MacBook-Pro-4.local CalendarAgent[997]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fdf6981ad60 {AccountName=Google, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fdf6e807840 [0x7fff7579c190]>{type = immutable dict, count = 10,
              entries =>
                        0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7fdf6e806420 [0x7fff7579c190]>{contents = "nosniff"}
                        1 : Case Insensitive Key: Content-Type = <CFString 0x7fdf6e807780 [0x7fff7579c190]>{contents = "text/html; charset=UTF-8"}
                        2 : Case Insensitive Key: Server = <CFString 0x7fdf6e801460 [0x7fff7579c190]>{contents = "GSE"}
                        3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff74a546b8 [0x7fff7579c190]>{contents = "Identity"}
                        6 : Case Insensitive Key: Date = <CFString 0x7fdf6e8077b0 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:49:54 GMT"}
                        7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7fdf6e801320 [0x7fff7579c190]>{contents = "SAMEORIGIN"}
                        8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7fdf6e801440 [0x7fff7579c190]>{contents = "1; mode=block"}
                        9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fdf6e807750 [0x7fff7579c190]>{contents = "BASIC realm="Google CalDAV""}
                        11 : Case Insensitive Key: Cache-Control = <CFString 0x7fdf6e807810 [0x7fff7579c190]>{contents = "private, max-age=0"}
                        12 : Case Insensitive Key: Expires = <CFString 0x7fdf6e8077e0 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:49:54 GMT"}
    Sep  6 01:50:35 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Sep  6 01:51:05 --- last message repeated 2 times ---
    Sep  6 01:51:05 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
    Below is the EtreSoft Analysis:
    Hardware Information:
              MacBook Pro - model: MacBookPro8,3
              1 2.4 GHz Intel Core i7 CPU: 4 cores
              4 GB RAM
    Startup Items:
              Cocktail - Path: /Library/StartupItems/Cocktail
              EyeConnect - Path: /Library/StartupItems/EyeConnect
    System Software:
              OS X 10.8.1 (12B19) - Uptime: 0 days 0:50
    Disk Information:
              TOSHIBA MK7559GSXF disk0 : (750.16 GB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        disk0s2 (disk0s2) <not mounted>: 749.16 GB
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              PNY Technologies USB 2.0 FD 32.08 GB
                        disk2s1 (disk2s1) <not mounted>: 209.7 MB

    I'm having the same issue - started a few months ago and had to forcibly shut down the Mac. That killed the hard drive, so I got a new hard drive and had the Apple Store install Lion on it, then used Migration Assistant to bring files over. Since then I've upgraded to Mountain Lion and have been experiencing lots of beach balls, freezes, etc. They're so bad that I've had to forcibly shut down 3 times, and each time can't restart. Each time I've erased and done a clean install of Mountain Lion from a USB, then used migration assistant and time machine to bring files back. Just did this last night and am still getting tons of beach balls and freezes. Help please! Here's what Etresoft says.
    Hardware Information:
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    Startup Items:
              CiscoVPN - Path: /System/Library/StartupItems/CiscoVPN
              Parallels - Path: /Library/StartupItems/Parallels
    System Software:
              OS X 10.8.3 (12D78) - Uptime: 0 days 1:25
    Disk Information:
              WDC WD5000BPVT-00HXZT3 disk0 : (500.11 GB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        V (disk0s2) /: 499.25 GB (294.67 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
                     [failed] com.apple.accountsd.plist
                     [failed] com.apple.mrt.uiagent.plist
    Launch Daemons:
                     [loaded] com.adobe.fpsaud.plist
                     [loaded] com.backblaze.bzserv.plist
                     [loaded] com.google.keystone.daemon.plist
                     [loaded] com.microsoft.office.licensing.helper.plist
    Launch Agents:
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.puredigitaltechnologies.FlipShare.AutoRun.plist
                     [loaded] jp.co.canon.CUPSCMFP.BG.plist
                     [failed] jp.co.canon.CUPSPS2.BG.plist
                     [loaded] jp.co.canon.UFR2.BG.plist
    User Launch Agents:
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [failed] com.apple.CSConfigDotMacCert-paul.graham...plist
                     [loaded] com.backblaze.bzbmenu.plist
                     [failed] com.facebook.videochat.paulburke.plist
                     [loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist
    User Login Items:
              Microsoft Database Daemon
              iTunesHelper
              Dropbox
    3rd Party Preference Panes:
              Backblaze Backup
              Flash Player
    Internet Plug-ins:
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              Flip4Mac WMV Plugin.plugin
              DivXBrowserPlugin.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              googletalkbrowserplugin.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              npg.plugin
              npgtpo3dautoplugin.plugin
              o1dbrowserplugin.plugin
              OfficeLiveBrowserPlugin.plugin
              QuickTime Plugin.plugin
              RealPlayer Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              WebEx64.plugin
    Bad Fonts:
              None
    Top Processes by CPU:
                  27%          mds
                   3%          WindowServer
                   2%          EtreCheck
                   2%          Skype
                   2%          hidd
                   1%          bztransmit
                   1%          fontd
                   1%          WebProcess
                   0%          Console
                   0%          mtmfs
    Top Processes by Memory:
              496 MB          Mail
              283 MB          WebProcess
              229 MB          bztransmit
              202 MB          mds
              164 MB          Safari
              139 MB          Skype
              66 MB          SyncServicesAgent
              57 MB          WindowServer
              53 MB          Finder
              41 MB          PluginProcess

  • IPhone 4S Battery Life: Best solutions and procedures for 1st time user: 1-Do you have a battery life issue (learn first what the usage time spec is about) 2-What can you try to remedy the situation without reading 500 pages of posts

    What follows is a grouping of some of the most fruitful procedures - from what I've seen in the biggest battery life issue thread - and some background information and discussion for solving or improving the battery life with the iPhone 4S and may be applicable also to devices on which iOS 5.0/5.0.1 has been applied. Credit goes to the respective users who contributed this information to the forum and they should be commended for doing so. This is not a final listing. The goal here is to provide a first stop sort of knowledge base document for newcomers instead of having them perusing the never ending threads where the wheel is reinvented on every page...
    Please don't post your questions, usage screenshots, or claims that it worked or not for you or anything here except PROCEDURES/DEBUG STEPS/SOLUTIONS or improvements to the procedures already listed here. Try to use point form and to be as concise and clear as possible. Hope all this helps.
    Thank you and good luck!
    General info and specs
    First, take a look Apple's battery tips, info and specs(obligatory reading for all Iphone 4S users - read it once and for all):
    http://www.apple.com/batteries/iphone.html
    http://www.apple.com/batteries/
    ... you didn't read it? loll Always remember this i.e. the definition of "usage":
    Usage: Amount of time iPhone has been awake and in use since the last full charge.  The phone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
    I'm still not convinced you read the links so here's what Apple has to say in terms of fine tuning your battery life:
    Optimize your settings
    Depending on how they are configured, a few features may decrease your iPhone battery life.  For example, the frequency with which you retrieve email and the number of email accounts you auto-check can both affect battery life. The tips below apply to an iPhone running iOS 5.0 or later and may help extend your battery life.
    Minimize use of location services: Applications that actively use location services such as Maps may reduce battery life. To disable location services, go to Settings > General > Location Services or use location services only when needed.
    Turn off push notifications: Some applications from the App Store use the Apple Push Notification service to alert you of new data. Applications that extensively rely on push notifications (such as instant messaging applications) may impact battery life. To disable push notifications, go to Settings > Notifications and set Notifications to Off. Note that this does not prevent new data from being received when the application is opened. Also, the Notifications setting will not be visible if you do not have any applications installed that support push notifications.
    Fetch new data less frequently: Applications such as Mail can be set to fetch data wirelessly at specific intervals.  The more frequently email or other data is fetched, the quicker your battery may drain. To fetch new data manually, from the Home screen choose Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually. To increase the fetch interval, go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Hourly. Note that this is a global setting and applies to all applications that do not support push services.
    Turn off push mail: If you have a push mail account such as Yahoo! or Microsoft Exchange, turn off push when you don’t need it. Go to Settings > Mail, Contacts, Calendars > Fetch New Data and set Push to Off. Messages sent to your push email accounts will now be received on your phone based on the global Fetch setting rather than as they arrive.
    Auto-check fewer email accounts: You can save power by checking fewer email accounts. This can be accomplished by turning off an email account or by deleting it. To turn off an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and set Account to Off. To remove an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and tap Delete Account.
    Turn off Wi-Fi: If you rarely use Wi-Fi, you can turn it off to save power. Go to Settings > Wi-Fi and set Wi-Fi to Off. Note that if you frequently use your iPhone to browse the web, battery life may be improved by using Wi-Fi instead of cellular data networks.
    Turn off Bluetooth: If you rarely use a Bluetooth headset or car kit, you can turn off Bluetooth to save power.  Go to Settings > General > Bluetooth and set Bluetooth to Off.
    Use Airplane Mode in low- or no-coverage areas: Because your iPhone always tries to maintain a connection with the cellular network, it may use more power in low- or no-coverage areas.  Turning on Airplane Mode can increase battery life in these situations; however, you will be unable to make or receive calls.  To turn on Airplane Mode, go to Settings and set Airplane Mode to On.
    Adjust brightness: Dimming the screen is another way to extend battery life.  Go to Settings > Brightness and drag the slider to the left to lower the default screen brightness. In addition, turning on Auto-Brightness allows the screen to adjust its brightness based on current lighting conditions.  Go to Settings > Brightness and set Auto-Brightness to On.
    Turn off EQ: Applying an equalizer setting to song playback on your iPhone can decrease battery life.  To turn EQ off, go to Settings > iPod > EQ and tap Off. Note that if you’ve added EQ to songs directly in iTunes, you’ll need to set EQ on iPhone to Flat in order to have the same effect as Off because iPhone keeps your iTunes settings intact.  Go to Settings > iPod > EQ and tap Flat.
    Usage specs for the 4S - http://www.apple.com/iphone/specs.html:
    Talk time: Up to 8 hours (12.5% per hour drain) on 3G, up to 14 hours (7.1% per hour drain) on 2G (GSM)
    Standby time: Up to 200 hours (0.5% per hour drain)
    Internet use: Up to 6 hours on 3G (16.6% per hour drain), up to 9 hours (11.1% per hour drain) on Wi-Fi
    Video playback: Up to 10 hours (10% per hour drain)
    Audio playback: Up to 40 hours (2.5% per hour drain)
    So a scenario of normal usage could be for example: 4 heavy hours of 3G internet browsing (66.4%), with one hour of call on 3G (12.5%) and 22 hours of standby (11%) = 100%
    A battery life issue is a problem where the drain is really out of spec either during usage or standby or both. For example, multi-% per minute drain during usage or a 10% drain per hour during standby is problematic. Browsing the internet on 3G during one hour and losing 16-17% is not.
    Apple's test methodology for claiming the specs:
    http://www.apple.com/iphone/battery.html
    Procedures
    davidch tips (reset+full discharge recharge):
    Go through these steps to address the battery after updating to iOS 5.0.1:
    1. Reset all settings (settings app-> general-> reset)
    2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
    3. Turn off system location services timezone and iAd
    4. Fully discharge battery  (tilll it shuts off with the spinning wheel)
    5. Fully recharge battery (overnight if possible)
    In my experience this improves the Standby battery drain issue significantly in most cases.  It reduces drain from 2-4% or more per hr to 0.5% or less. It has worked for many, many users now. If it does not work after a few try's you may have a real battery or hardware issue and should contact Apple.  Good Luck!
    ram130's variant of davidch i.e. additional steps:
    Now using davidch original steps and attaching the tweaks I made to get me more usage. As shown on page 29.
    Go through these steps to address the battery after updating to iOS 5.0.1:
    1. Reset all settings (settings app-> general-> reset)
    2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
    3. Turn off system location services timezone and iAd
    4. Fully discharge battery  (till it shuts off with the spinning wheel)
    5. Fully recharge battery (overnight if possible)
    6. Disable Siri 'Raise To Speak' and REBOOT *( if possible use another camera to verify the                 infrared is off after the reboot).
    7. Set emails, icloud and calendars to fetch. ** test. Mines on hourly.
    8. If your in a no signal and your phone is saying "Searching..." even after 10mins, reboot while in that area and after 1-2min it should say "No Service". This mainly applies to Verizon customers and improve battery life in these areas.
    9. *optional* Goto Settings > General > Network and you will see "Hotspot.." loading something, wait a few seconds and it should say "setup personal hotspot" then exit out.
    * I notice a great improvement after disabling this and rebooting. This increased my "screen on" usage or at least helped it. Make the change.
    ** I have not tested push yet to narrow down the drain but I had this change on my phone. I believe exchange push is responsible for some stand by drain. As for icloud, haven't notice much of a difference. Just try it for a day. My email still came in fast most times. Again still testing, will report back on these..
    buxbuster tips(wifi sync, iCloud):
    These are my own tested workarounds that worked for my iPhone 4S and seemed to have worked for others as well :
    Workaround number 1. Deselect wifi-sync in iTunes and press sync.
    If that doesn't work try :
    Workaround number 2 : Remove iCloud, reset network settings. ( I guess this won't work for you since you don't have it enabled ).
    If both workarounds fail, you can always try to completely wipe your phone. That also solved some of the cases out there.
    rolandomerida tips - i.e. buxbuster and additional steps:
    Finally, I solved the syncing error loop. My contacts are syncing flawessly again between my devices and iCloud, and yes, the battery stopped draining, which is the main topic here.
    I followed instructions from buxbuster (check his workaround a few pages up!) and an additional BIG step to restore contacts and syncing, as seen in a MacRumors forum.
    This is what I did:
    1. Make a backup of your Address Book, using the vCard option (or both, it doesn't hurt). Save it for later.
    2. In your iPhone, delete iCloud account. When it asks, accept both: delete AND delete from my iPhone.
    3. Reset network settings. The iPhone will restart, then will ask you to unlock the SIM card.
    4.Turn Wi-Fi on.
    5. Add the iCloud account again.
    That's for Buxbuster's workaround. For some, it might work just like that. My iPhone repopulated from iCloud after step 5, but I still had that "server error" on iCloud. I had to do some extra steps, since my Mac was not syncing to iCloud and couldn't edit anything on my Mac or iCloud. Syncing back had to be fixed, too. If not, the syncing loop would continue from my iPhone, and the battery would drain awfully again.
    1. In System Preferences -> iCloud, I turned Contacts off. I chose "keep on My Mac" those contacts, but I got an empty Address Book after a while. And a few minutes later, iCloud contacts were empty and my iPhone also. It is scary at first! Now, before importing that vCard backup...
    2. Turn Wi-Fi off. This is important, since your contact-empty iCloud will attempt to wipe your Address Book from your Mac in seconds after importing.
    3. Import your vCard backup to Address Book. Just drag it to your blank Address Book window; it asks if you want to import "x" number of cards. Of course, say yes.
    4. Turn Wi-Fi on, and then iCloud contacts on again (System Preferences -> iCloud). It will offer to merge your newly populated Address Book with iCloud (which is empty at this point). It should upload every single contact to iCloud, and then to your iDevices. If not, a fifth step would be to import the vCard file to iCloud, but it shouldn't be necessary.
    So, with iCloud syncing working correctly, there is no battery draining! Again, that was my particular issue.
    I can't tell if this is the single answer to the widely spread battery draining problem, but it sure can be fixed with these workarounds, and yes, Apple should address the problem with a future update, for we affected customers don't need workarounds in the first place
    This is the MacRumors discussion:
    http://forums.macrumors.com/showthread.php?t=1256807
    And dont' forget to check buxbuster's fix, video, and THANK him!
    Miless tips (full 800mb release of 5.0.1 and sanitizing a restore):
    As for 4S battery life. Try doing this,
    1. Settings>Location Service ... disable all location services you do not need. In particularly Facebook because it drains the battery a lot.
    Scroll down to the bottom at Settings>Location services>System Services ... Disable Setting Time zone, location based iAds, Diagnostic & Usage.
    2. Settings>Notification>Calendar ... turn off the Notification Centre.
    3. Settings>General>Reset ... do Reset All Settings. Doing this will not wipe out your iPhone. It will just Reset the network settings, location warning, keyboard dictionary, etc... but it will clear up some corrupted data there. Generally this will help.
    Try these 3 steps first... if it still drains a lot, try the following,
    4. Drain your battery down to 1%. Then charge it up using USB from PC ... not the charger. The charger output 1.0 A ( x 5V from USB ... you get 5W power). From PC, output is only 0.5A x 5V = 2.5W power. Charging is slower but trickle charge 4S helps the battery retain its charge better. I think it takes about 3-3.5 hours to charge full from USB/PC compared to slightly below 2 hours using iPhone charger.
    If after doing the above still could not solve your battery issues (mine with iOS 5.0 was ok up to step 4, but not iOS 5.0.1).... plug you iPhone to a charger (any charger), from iPhone, access your iCloud ... set it up if you havent. Back up your iPhone data to iCloud. if you do not have enough storage (only 5GB is free), go to details and select the apps you need its data backup, choose only those you really need and leave those unnecessary ones out. Back up your camera roll to your PC/Mac manually as it could be too big to backup to iCloud.... once you have it setup, make sure you are on Wifi ...  tap backup to iCloud from your iPhone. It will take a while if the file is huge.
    Once backup to iCloud is completed, plug your iPhone to PC/Mac and launch iTunes 10.5.1 (make sure you have 10.5.1)
    Click Restore. It will automatically initiate a download of iOS 5.0.1 ipsw for iPhone 4S. Wait for the whole process to finish, ie. download, restore software/firmware.
    Once its done, do not set up your iPhone from iTunes. Set it up on your iPhone. Go through the selection. When prompted, select restore from iCloud (from your iphone backup earlier). Keep your iphone plugged into iTunes while restoring backup from iCloud. Because while restoring from iClouds, some data will be synced from iTunes if you plug in, e.g. music, video, etc... unless you bought these content from iTunes store. Apps will be downloaded from App Store from the cloud.
    Once it's all done restored. Turn off your iPhone,.. and turn it on again.
    Now, hopefully your battery wont be draining so fast anymore. Usually it wont after this. But you need to charge your battery at least 4-5 cycles to stabilize the charge on the battery. I dont know why... but battery life seems to get better and better for me after a few charge cycles after all the above work.
    Good luck. Let us know if it works for you.
    W. Raider tips (Sirii):
    Bottom line for me of things that helped battery life are:
    1. Turing off Siri and Rebooting the phone by holding the Home button and Top button down, ignoring the slider, until the phone shut down. (turn off Siri, reboot, and check top front of iPhone 4S against a lesser camera like the front-facing camera on an iPad2 - making sure the IR sensor is off)
    2. Fully draining the battery, meaning using the phone until it shuts itself off from a drained battery and then recharging it to 100% about 4, maybe 5 times. I charged it both with a Mac and a wall charger.
    Hope this is helpful!
    Comments
    jmm514 remarks (Twitter):
    I may have found something. I had Twitter disabled in my notifications, but got a tweet today that popped up on my home screen. Didn't know I had this enabled. At the bottom of the Twitter notification settings is the home scrren toggle. Since disabling this, battery life seems better. Considering there is no setting for frequency of checking for tweets, it appears the phone is continually connecting to wifi to check for new tweets.
    tmksnyder comments (notifications, corrupt data in iCloud):
    For me, I found my iphone on wifi mysteriously connecting to my mac.  I eventually narrowed it down to the Apple Move Trailers app which keeps a file in iCloud.  The phone was trying to sync the file with the mac in the background even when the Movie Trailers app was closed (hitting the red x).  Based on my macosx logs the iCloud process that was trying to sync was working directly between the phone and the mac without using itunes by connecting to an https address hosted on the phone.  It was connecting every 3 minutes and failing (while phone was awake or awake during during a notification).  I also found that iCloud control panel on OSX would error if I tried to delete the file.  I fixed it by removing the App and doing a hard reset which stopped the sync.  I probably could have turned off iCloud document sync in the phone but didn't think of that.  My battery life has greatly improved while at home on wifi.    I am now at 28 hrs standby, 2 hrs 20 minutes of usage, and 68% battery.  It was ok before where I could get 20-30 hrs standby and 6 -8 hrs usage.  My usage today was phone calls, 3g surfing, and music via bluetooth in the car.
    I also found even with Itunes iMatch, if I mass updated tages, art work etc, it would hit the phone on wifi even in standby.  I was amazed.   Granted if I am not doing updates, Match won't hot the phone so this was a once in awhile event.  I could drop my percentage by 5-10% in a matter of minutes when doing updates.   I think a lot of our problems are background processes, associated with iCloud, notification, and apps.  More features means more battery.   I think the key thing is to keep track of what has recently been added or changed if battery life gets worse all of a sudden.   It may be an app that was recently installed and if possible you may want to completely remove it and not just quit it.
    With twitter, i think it uses push notifications so it doesn't need to be running and actively poll on the phone. For instance , if i quit the mail app, i still will get mail notifications and can swipe the message and load mail. Apple Push Notifications servics maintain the connection to the phone and there are likely pings or connection checks  that occur for the service on an os level not an app level.  This minimizes the load so there arent a bunch of apps all runing and constantly checking.  The notification service , if it is contacted from twitter or another service with data, will check the settings you have registered to the with the apple push service and send the notification to your phone.  No matter what, there is a drain with notifications. M hunch is once one application is configured to receive notifications, connection checking occurs betwen the push service and the phone so it knows where it is on the network. If it is implemented correctly, these checks arent frequent if you are still and more frequent as you move. The other drain is for when the noification hits and is processsed.  If i get 9 emails over night, my screen just popped up for 20 seconds or so to process each message using battery.  I would even think that just go from low power to turning n the screen uses more juice than if the device was already on and i get the message.  On nights I get no notifications, I see a 3  or 4 percent drop.  On nights with a number of notifications, i have seen up to a 10 percent drop.  Besides notifications, wifi sync and icloud will poll on the local network and use up battery if the host computer is on and running itunes or trying to sync a data file that is corrupt (which i had with the apple movie trailers app causing my phone to drain).  For me turning off wifi sync and remving a corrupt file in icloud solved my battery issues and I get over 24 hrs of standby with 6 to 9 hrs of use and this is with all the normal location services and push serivices turned on.
    See http://developer.apple.com/library/mac/ipad/#documentation/NetworkingInternet/Co nceptual/RemoteNotificationsPG/ApplePushService/ApplePushService.html for more info.  I think it has a good overview of how the notifications work.

    Well seems like that rumor of iOS 5.0.1 is finally gone the way of the dogs since developers got a beta of 5.1. So as stated earlier in the master discussion-> I suspect if you are filling up this thread with false post or creating a master set of links to various post that are unreliable you are wasting your time. Press is not going to touch the story due to poor or inaccurate sources which may be links from the master thread. This can include inaccurate information, combination of conflicting post or postings from users which may not own the device. Reputable press organizations have policies that require discloser and strict rules about what is a reliable source for a story. It is clear that many of the post in the master thread, which are links presented here are questionable. 
    Sorry to say that postings taken without any analysis of their totality have been propagated via various sites, for example sites such as http://www.2012federalbudget(dot)com. (Do not visit but I suspect that this is not the 2012 federal-budget site you would expect based on analysis of the records. There are plenty of sites like http://www.2012federalbudget(dot)com propagating questionable post in these threads.) One site for example in the discussion thread used a self signed certificate, the site had a log in to allow users to enter their OpenID. Seems many of these sites are pop and drop drupel configurations.
    So remember this is how the really bad rumor of iOS 5.0.2 got started, the 5.1 memory leak issue, iCloud Issues, call quality, address book, etc.
    Some of the postings have been very comical, I think the latest now is a dropbox issue. Seems that the length of the previous thread has resulted in various app engines of some proxy servers/tools reaching their limits.
    So I would make sure to know the source of any information you link to. Make sure you avoid entering any information to outside links such as OpenID or Apple ID, these are big prize items for anyone with malicious intent.  If you have issues and are a valid user contact APPLE CARE. (Note link is using McAfee Secure Short URL Service, and is https.)
    http://mcaf.ee/ricdt
    The original solution still represents a high level of success for users having any battery issues.
    Install 5.0.1 on your iPhone 4s. Some users posting they are still using older versions, bad fake serial numbers, etc.
    Make sure your device can run iOS 5.0.1 and is not altered.
    Make sure you use a new Sim, not some cut down version which many users admit to doing. (Again, worth confirming what people are posting.)
    Reset the device doing a hard reset and software reset.
    Let battery drain and then charge for the full cycle, which is 24 hours.
    I think you will find you will get the battery usage that APPLE has stated for the device.
    Best of luck, stay safe and thanks

  • Excise Part 1 updation at the time of issue.

    Hi,
    I am having one requirement regarding RG23 A part 1 updation at the time of issue.
    1) How the register part 1 updated at the time of goods issue.
    2) I purchased one material from two different vendor. One is excise unit & other is non excise.
    At the time of goods issue to shop floor how the system determine that this issue is from excisable material or non excisable material.And accrdingly how will update part 1 entries.
    Every time i will go to J1I5 transaction for updation of RG23 A or it will update automatically.
    Regards,
    Dinesh

    Hi Sathish ,
    In CIN - basic settings - Maintain excise groups there in that outgoing excise invoice Excise invoice during the billing and Create and post inv in single make the both fields un mark.
    Hope this will make you to create invoice and excise invoice separately, or els find if any exit is used earlier.
    Check and revert
    Regards
    Ram

  • I am using Windows 7 Home Premium 64-bit OS.  I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installa

    I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installation process it gave me an error message that said: 
    Runtime error! 
    Program C:\Program Files\iTunes.exe
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I quit the installation, uninstalled iTunes and rebooted my computer.  I now receive a similar message with a slight difference:
    Runtime error! 
    Program C:\Program Files (x86)...
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I did not leave anything out from the error message.  It doesn't point to a specific file, it just ends with "(x86)..."  Every time I boot up my computer, this error message pops up on my desktop.
    How do I repair this issue?  I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse.  I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!!

    Hi lustyln,
    I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
    For reference, here are your product specifications:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
    To get your PC software back to how it was when it was first purchased, run a system recovery:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
    I hope this helps.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Maybe you are looking for