Issue on availabilty control

Hello Experts,
Requesting your suggestions/solutuon to the below issue on availabiltiy control.
Few days back we faced a issue that , the AVAC status set for the projects automatically gets deactivated and we were not able to set the AVAC status back through CjBN or any other direct methods.
After investigation we could find that , since Availabilty control activation type is set as'1' which means the AVAC status should get set whenever a budget is assigned to the project. We could find that by just editing already existing budget in CJ30, automatically actiavted the AVAC status.
Now the problem we are facing is that , this status is getting decativaed again. What could be the possible reasons ? anyone has faced such issue, please share your experinece/suggestions.
Thanks in adavnce
Sandeep

Hi sudhir,
Thanks for your reply.
Is there anyway , we could check whether CJBW is run for that project or not ?
I have checked for the project structure , but no chnages to the structure is made after the AVAC status is set for that project. so i assume this( problem) is not due to any chnages to the project structure.
Similarly can i see somewhere, if any transcation like CJBW or some postings have been done against the project, which could possibly deactivate the AVAC status ( just a guess).
Is there any such reports ?
Please let me know.
thanks and regards
Sandeep

Similar Messages

Issue with copy control of Delivery document to Billing document

Hi All,
I am having some issue with copy control of Delivery document to Billing document.
I am having two line items in Delivery documetn, one is for item to be delivered to customer and other which is created due to batch determination.
Now , when I create billing document (VF01) with reference to this delivery document , I want only one line item (for the one which needs to be delivered to customer).
I have used following things in copy contro from ZLF to ZF2:
Copying requirements: 004 ( Deliv-related item)
Data VBRK/VBRP: 007 "(Inv.Split (Rec/Div))
Is it correct or shall I use something else, so I have only one line item in Billing document.
Regards
Nidhi

Pls. search the forum.
Pls. refer the below link -
Line with 0 quantity for main item with batch split
Thanks

COST ELEMENT WISE BUDGETING AND AVAILABILTY CONTROL

Dear Experts,
I am looking at Cost Element wise Budgeting and Availabilty control in internal Order, Availabilty control also should be Cost element wise.
Regards
Deendayal

Dear Surya Narayana,
Thanks for your prompt response, well i know that Budgeting is at summary level, want to just explore any other way out, is there any possibilty to link planning to budget as plannig is done on cost element wise.
you can also send me the details of budgeting and avaiilability control at dayal05 at gmail.com.
regards
Deendayal
Edited by: DEENDAYAL RAMACHANDRAN on Mar 3, 2009 2:15 PM

Having an issue with Parental Controls...

Hi, I'm having an issue with Parentel Controls.
I run several student labs set with parental controls on the systems for a higher education facility. We don't have restricted access to web content (our students need to look up a lot of things, even some that would be considered racey, it's an arts school) and when I set it to "Allow Unrestricted Access" to web content, about a week or so later I'll start getting reports that content is being blocked. I go to check, and sure enough the controls are set to "restrict access to content".
I've had two interations of this issue thus far and it's a pane to go through each system (there are a lot of systems) and manually reconfigure them back to default.
Any tips?

My son could not interact with sites (log in, post) but he could access them (when parental controls were turned on). I had to go under "preferences" on Firefox (under his name) First go to the drop down the menu from the word "Firefox" then "Preferences" "Privacy" (at the top) then "Exceptions" on the right..... and add each address of the sites and pages I wanted to allow. That worked like a charm!! Maybe pull up the itunes STORE address, copy and paste it in "always allow" (you can choose "block" also.....) This is in Firefox PREFERENCES, not just the parental control section.....
Let us know if that helped! Apple was NO help. (I am an Apple fan, but I am not paying 49.99 to get a question answered by someone who didn't sound like he knew anything, anyway...) I think when you pay for a computer you deserve to have ALL the features work... Is that too much to ask?

Issue in Process Controlled workflow for Shopping cart in Quality system.

Hello All,
I ahve configured a Process controlled workflow in SRM 7.0 with custom resolver, and I am facing an issue taht the Workflow works well in Development but in Quality the approvers are dropped after SC is ordered in Quality system.
The SC Workflow drops the approvers picked up from the Interface method /SAPSRM/IF_EX_WF_RESP_RESOLVERGET_AREA_TO_ITEM_MAP and IF_EX_WF_RESP_RESOLVERGET_APPROVERS_BY_AREA_GUID of BADI /SAPSRM/BD_WF_RESP_RESOLVER. The approvers can be seen in the shopping cart Approval preview Tab until the SC is ordered.
I have compared the OSS notes relevant for Workflow, all of them have been transported, Also I compared and checked general Workflow settings, BRF Config and Process level settings in Dev and Quality, everything is same.
Also while debugging; the approvers can be seen in the decision set table in the create_process_forecast method of class /SAPSRM/CL_WF_PROCESS_MANAGER.
Kindly let me know what else i can check to find the root cause.
Thank you in advance for help!
Regards
Prasuna.

Hello Vinita;
Thanks for the input and sorry for the not so "ASAP" reply;
From what I'm seeing in from your 2 screenshot, i strongly believe that the problem is even before the Z implementation /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID (in which the FM i ZSRM_GET_USER_FROM_PGRP is called. I think the problem could be in the process level determination ZSRM_WF_BRF_0EXP000_SC_APP100. Let me explain:
In your cases where not buyer is determined, in the approval tab there is not even a process level for buyer approval. If the problem were indeed in the implementation /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_APPROVERS_BY_AREA_GUID then the process level would be there, but the system will display, instead of the name of the buyer(if the buyer determination fails) a red label with the message: "With the strategy "Buyer determination" an approver could not be determined (or something like that..please check the image at the end of the text)".
I can propose a way to discard this: Implement the method /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_FALLBACK_AGENTS of class ZCL_BADI_SC_WC (in case you didn't know, in this method you can specify an "default" approver in case that the determination of approver in GET_APPROVERS_BY_AREA_GUID fails). The idea is to specify an default approval and see how it behaves:
If the user you indicated in the method GET_FALLBACK_AGENTS appears as approver, then yes, the problem is arises from implementation GET_APPROVERS_BY_AREA_GUID, in which case it could be a data problem (peharps in pposa_bbp?). You could also check in TX SU53 with the users with this problem to see if there's a missing authorization objetc.
If, in the other hand, the "default" approver is not shown, it means that the process level buyer determination is not even called, so you should check in more detail ZSRM_WF_BRF_0EXP000_SC_APP100 and /SAPSRM/CL_WF_PROCESS_MANAGER > Determine process restart –method ----- (i have never used this method, so i could not tell if it could be the source of the problem).
Also, you could implement the method GET_FALLBACK_AGENTS in this way so the default approver would be the WF administrator indicated in the customizing (or you could just append directly any user you want):
METHOD /SAPSRM/IF_EX_WF_RESP_RESOLVER~GET_FALLBACK_AGENTS.
   DATA: lv_admin_expr TYPE swd_shead-admin_expr,
         lv_admin      TYPE swd_shead-wfi_admin,
         lv_admin_type TYPE sy-input,
         ls_agent      TYPE /sapsrm/s_wf_approver.
   CALL FUNCTION 'SWD_WF_DEFINITION_ADMIN_GET'
     IMPORTING
       default_admin_expr = lv_admin_expr
       default_admin      = lv_admin
       default_admin_type = lv_admin_type.
   ls_agent-approver_id = lv_admin.
   APPEND ls_agent TO rt_agent.
ENDMETHOD.
Error of agent determination:
Please let me know the result of the test with the implementation of method GET_FALLBACK_AGENT. By doing this we could ensure if really the problem is in method GET_APPROVERS_BY_AREA_GUID or before. I just made the test in our system and I'm almost sure that you wont get the default approver, but i could be wrong.
Any question please let me know.
Best regards
Cristian R.

Issue in Custom Control UI element

Hi there,
               I have created 2 custom controls(SAP mobile 7.1), one for rendering images(actually map images) and another for capturing user's signature. Both are integrated into the main application and works fine when alone. But when present together, certainly on different screens in the main app, still it works but with rendering problems. Say when navigating from the screen that displays the map custom control to the screen that has the signature capuring custom control, the map image is still getting displayed over the signature custom control view.
           I wonder , if the problem is with disposing of the custom control. Can anyone suggest how to do that. Or something else has to be done?
Regards,
Aravind

Hopefully someone more knowledgeable about custom controls \ SWT can add some input
I do know disposing the SWT controls is important but not sure if it would solve your problem
from our application that uses a few simple custom controls together, we definitely needed to use dispose or it would cause memory consumption issues and slow performance
within the constructor
[Text object].addDisposeListener(this);
method to dispose color and fonts used
public void widgetDisposed(DisposeEvent event)
              font.dispose();
              amber.dispose();

Budget availabilty control error

Dear Gurus,
I am facing problem while doing time sheet booking at WBS ELement. System gives error "Budget exceeded for the WBS (Error no:BP 603)"
The steps I follow are as under:
1. I created a project in CJ20N
2. Budgeted the project in CJ30
3. Released Budget in CJ32
4. The settings of the budget profile are such that when I release the budget, Availability Control gets activated.
5. Released the project
6. In CAT2, I post actual hours and give reference of the reciever WBS of the project.
Now, in CAT7, when I try to transfer to CO, system gives me the error:
"Item 001 WBS xxxx BUDGET EXCEEDED (error no. BP 603)"
Same thing happens if I try to settle a work order on the WBS and any FI posting
But it allows to post costs for Goods issue.
In tolerance limit settings, the usage is 100% and "All activity grps " is selected
Regards,
VDS

Hi
It seems to be the budget is increased once ur doing CAT7.. so increase the Budget in the WBS element and try to post it again..
I hope this is the problem
- Pithan

Issue in treeview control along with page viewer web part showing the sub sites from MMS

hi,
Am having a treeview control populates with values from MMS - Managed Metadata Service.
[ Products ]
----->ms office
           ----->word
            ----->excel
             ---->powerpoint
-------->Collaboration
                ---->   sharepoint 2003
                 ----> moss 2007
                 ----> sp 2010
                 -----> lync
all these values excel, word, powerpoint are sub sites created under ms-office site collection.
and sharepoint 2003, mos 2007, sp 2010, sp 2013 are sub sites created under collaboration.
now, on the page load, end user clicks on word and he should navigate to the sub site "wordsite" and it should show the home page of word sub site.
we have created a page viewer web part and assigned the url property of the page viewer to the sub site url.
but the issue is, when end user clicked  on the child node "powerpoint", the page did a Post Back and treeview control immediately collpased and it shows the Products [top level - parent node] only.
Am unable to set the current selected value- ie here its excel and show the excel node in the trewview.
how can i get this child tree node as the selected node.
help is highly appreciated!

Check if below can help
http://thechriskent.com/2012/05/09/changing-the-default-expansion-of-metadata-navigation-on-initial-page-load/

Issue in List Control

I am facing a strange issue on the implementation of List Control on webdynpro ABAP UI screen . I have created a List Control where I have some buttons on the toolbar to perform some action. I am providing the data to the list .
My issue now is when I select a line item on the first row of the List and click any of the buttons , no actions is getting triggered but works fine for the second row onwards. Can you please help in providing some suggestions?
Thanks
Ram

Hi,
For the First time, the lead selection is already set in the list control, hence the buttons are not getting triggered.
You might have written the code inside the buttons only when there is a change in the slection of list.
Regards,
Lekha.

Issue in copy control F2 to RE for BoM (TAP) item

Hello All,
I am facing a issue in return order which is reference to F2.
I have maintained all standard copy control, still I am having a issue in TAP item category.
The issue is
In my sales order I have one standard item ( TAN ) and one BoM item(Main item of LUMF) and its sub item is of TAN as BoM is of item pricing.
I can see in my order to Invoice all 3 items ( TAP item is not relevant for pricing and picking, its fine )
but when I try to create return order with reference to F2 , I could get all 3 items in return order but TAP item converted to TAN and hence its relevant for the pricing, return order value is not matching with F2 ( as third TAP item comes in picture)
as In my invoice BoM main item is having TAP item category ( showing zero price in Invoice) so I believe same item should get copy in return order with zero pricing but its not happening.
Guys can you provide me any specific copy control for TAP or any other solution.
BR,
Abhijit

Hi Navaneetha,
I have maintained the copy control as per your suggesstion but it is not working
I will tell you how I want the scenario
In Return Order RE I want all items to be copied from F2
1 ) Standard material 1-- TAN (F2) -
> REN ( RE)
2) BoM
Material 1-- TAP (F2) -
TREN ( developed by me ) for no pricing
sub item TAN (F2) -
REN
for above item categories I have maintained determinations and copy control
still getting a message in while creating RE is " Item category for item 30 can not be determined."
Regards,
Abhijit

Oracle 10g R2 - Metadata Issue With Version Controlled Resources

We are trying to utilize the Oracle 10g R2 feature that allows user-defined metadata to be attached to XML DB resources. However, we are encountering errors when we try to append/attach metadata to a version-controlled resource (VCR). The following steps were followed:
1. Register a new schema to be used for metadata (XMLSCHEMA.registerSchema).
2. Add a new resource to to the XML DB and make it version controlled (DBMS_XDB.createResource and DBMS_XDB_VERSION.makeVersioned).
3. Checkout the newly created version-controlled resource (DBMS_XDB_VERSION.checkout)
4. Add metadata to the version-controlled resource (DBMS_XDB.appendResourceMetadata)
However, after step 4, the errors shown below are encountered:
========================================================
begin
ERROR at line 1:
ORA-00600: internal error code, arguments: [qmxStrCopy: INLOB 2], [], [], [],
ORA-06512: at "XDB.DBMS_XDB", line 890
ORA-06512: at line 2
========================================================
The steps followed for adding metadata to a resource were taken from Chapter 26 of the "Oracle XML DB Developer's Guide 10G Release 2" (http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb_repos_meta.htm#sthref2302).
Is is possible to append and maintain metadata to an XML DB version controlled resource (VCR)? If so, what are the correct steps to do this? Note that if this is tried with a resource that is not version controlled, then no errors are encountered.
Thanks,
Steve

It appears that this issue has been solved in the next release of the database
QL> spool testcase.log
SQL> --
SQL> connect &1/&2
Connected.
SQL> --
SQL> var schemaURL varchar2(256)
SQL> var schemaPath varchar2(256)
SQL> var resourcePath varchar2(256)
SQL> --
SQL> begin
2    :schemaURL := 'metadata.xsd';
3    :schemaPath := '/public/metadata.xsd';
4    :resourcePath := '/public/metadataTest.txt';
5 end;
6 /
PL/SQL procedure successfully completed.
SQL> call dbms_xmlSchema.deleteSchema(:schemaURL,4)
2 /
Call completed.
SQL> declare
2    res boolean;
3    xmlSchema xmlType := xmlType(
4 '<?xml version="1.0" encoding="UTF-8"?>
5 <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="qualified" attributeFormDefault="unqualified" xdb:storeVarrayAsTable="true">
6          <xs:element name="root" type="rootType" xdb:defaultTable="METADATA_TABLE"/>
7          <xs:complexType name="rootType" xdb:SQLType="METADATA_ROOT_T">
8                  <xs:sequence>
9                          <xs:element name="child" type="childType"/>
10                  </xs:sequence>
11          </xs:complexType>
12          <xs:complexType name="childType" xdb:SQLType="METADATA_CHILD_T">
13                                  <xs:sequence>
14                                          <xs:element name="Child1" type="xs:string"/>
15                                          <xs:element name="Child2" type="xs:string"/>
16                                  </xs:sequence>
17          </xs:complexType>
18 </xs:schema>
19 ');
20 begin
21    if (dbms_xdb.existsResource(:schemaPath)) then
22      dbms_xdb.deleteResource(:schemaPath);
23    end if;
24    res := dbms_xdb.createResource(:schemaPath,xmlSchema);
25 end;
26 /
PL/SQL procedure successfully completed.
SQL> begin
2    dbms_xmlschema.registerSchema
3    (
4      :schemaURL,
5      xdbURIType(:schemaPath).getClob(),
6      TRUE,TRUE,FALSE,TRUE,
7      enableHierarchy=>DBMS_XMLSCHEMA.ENABLE_HIERARCHY_RESMETADATA
8    );
9 end;
10 /
PL/SQL procedure successfully completed.
SQL> declare
2    res boolean;
3 begin
4    if dbms_xdb.existsResource(:resourcePath) then
5      dbms_xdb.deleteResource(:resourcePath,4);
6    end if;
7    res := dbms_xdb.createResource(:resourcePath,'Mary Had a Little Lamb');
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> commit
2 /
Commit complete.
SQL> select xdbUriType(:resourcePath).getClob()
2 from dual
3 /
XDBURITYPE(:RESOURCEPATH).GETCLOB()
Mary Had a Little Lamb
SQL> declare
2    resid raw(16);
3 begin
4    resid := dbms_xdb_version.makeVersioned(:resourcePath);
5 end;
6 /
PL/SQL procedure successfully completed.
SQL> commit
2 /
Commit complete.
SQL> begin
2    dbms_xdb_version.checkout(:resourcePath);
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> commit
2 /
Commit complete.
SQL> set long 10000 pages 0 lines 150
SQL> --
SQL> select r.res.getClobVal()
2    from resource_view r
3   where equals_path(res,:resourcePath) = 1
4 /
<Resource xmlns="http://xmlns.oracle.com/xdb/XDBResource.xsd" Hidden="false" Inv
alid="false" VersionID="1" ActivityID="0" Container="false" CustomRslv="false" V
ersionHistory="false" StickyRef="true">
<CreationDate>2006-06-10T05:01:25.355009</CreationDate>
<ModificationDate>2006-06-10T05:01:25.355009</ModificationDate>
<DisplayName>metadataTest.txt</DisplayName>
<Language>en-US</Language>
<CharacterSet>UTF-8</CharacterSet>
<ContentType>text/plain</ContentType>
<RefCount>1</RefCount>
<ACL>
    <acl description="Public:All privileges to PUBLIC" xmlns="http://xmlns.oracl
e.com/xdb/acl.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:sch
emaLocation="http://xmlns.oracle.com/xdb/acl.xsd                           http:
//xmlns.oracle.com/xdb/acl.xsd">
      <ace>
        <grant>true</grant>
        <principal>PUBLIC</principal>
        <privilege>
          <all/>
        </privilege>
      </ace>
    </acl>
</ACL>
<Owner>SCOTT</Owner>
<Creator>SCOTT</Creator>
<LastModifier>SCOTT</LastModifier>
<SchemaElement>http://xmlns.oracle.com/xdb/XDBSchema.xsd#binary</SchemaElement
>
<Contents>
    <text>Mary Had a Little Lamb</text>
</Contents>
<VCRUID>15DE79F263F7CC00E040578C2A0656F8</VCRUID>
</Resource>
SQL> begin
2    dbms_xdb.appendResourceMetadata(:resourcePath,xmltype(
3 '<root xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
4         xsi:noNamespaceSchemaLocation="metadata.xsd">
5      <child>
6        <Child1>AAA</Child1>
7        <Child2>BBB</Child2>
8      </child>
9 </root>'));
10 end;
11 /
PL/SQL procedure successfully completed.
SQL> commit
2 /
Commit complete.
SQL> select r.res.getClobVal()
2    from resource_view r
3   where equals_path(res,:resourcePath) = 1
4 /
<Resource xmlns="http://xmlns.oracle.com/xdb/XDBResource.xsd" Hidden="false" Inv
alid="false" VersionID="0" ActivityID="0" Container="false" CustomRslv="false" V
ersionHistory="false" StickyRef="true">
<CreationDate>2006-06-10T05:01:25.355009</CreationDate>
<ModificationDate>2006-06-10T05:01:25.558913</ModificationDate>
<DisplayName>metadataTest.txt</DisplayName>
<Language>en-US</Language>
<CharacterSet>UTF-8</CharacterSet>
<ContentType>text/plain</ContentType>
<RefCount>1</RefCount>
<ACL>
    <acl description="Public:All privileges to PUBLIC" xmlns="http://xmlns.oracl
e.com/xdb/acl.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:sch
emaLocation="http://xmlns.oracle.com/xdb/acl.xsd                           http:
//xmlns.oracle.com/xdb/acl.xsd">
      <ace>
        <grant>true</grant>
        <principal>PUBLIC</principal>
        <privilege>
          <all/>
        </privilege>
      </ace>
    </acl>
</ACL>
<Owner>SCOTT</Owner>
<Creator>SCOTT</Creator>
<LastModifier>SCOTT</LastModifier>
<SchemaElement>http://xmlns.oracle.com/xdb/XDBSchema.xsd#text</SchemaElement>
<Contents>
    <text>Mary Had a Little Lamb</text>
</Contents>
<VCRUID>15DE79F263F7CC00E040578C2A0656F8</VCRUID>
<Parents>15DE79F263F8CC00E040578C2A0656F8</Parents>
<root xmlns="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNam
espaceSchemaLocation="metadata.xsd">
    <child>
      <Child1>AAA</Child1>
      <Child2>BBB</Child2>
    </child>
</root>
</Resource>
SQL> quit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.0.0 - Alpha
With the Partitioning and Data Mining options
I've filed bug 5313655 for the 10.2.x behavoir. If this is important to you you might want to consider signing up for the forthcoming beta program for the next release of the database

Mac OS X 10.7.4 ARD Issues When Observing/Controlling Computers with Display Mirroring/Different Resolutions

As if Macs in an enterprise environment could be more difficult to manage, now since our upgrade to OS X 10.7.(4) I have lost the ability to remotely control numerous Macs in our organization. The issue occurs when attempting to control a Mac running OS X 10.7.(4) that has their Display mirrored and the resolution does not match on both displays. What happens is that I can see the remote screen however it does not fill the entire Observe/Control window. Instead, the remote screen takes up about 50% of the window, the rest is black but sometimes will display a mirror image of the remote screen in the black area. What?! Yeah, I've attached a screenshot because this is ridiculous. The real problem is that I cannot control the computer when it has reached this state, the mouse no longer functions properly, it is not clicking where I place the mouse, etc. I have made sure that I have all updates including ARD Client/Server updates. I even tried VNC but as I have come to find out that is a whole other issue (doesn't work, sends me to the login screen, etc).
So here's what I need:
- A patch that is going to fix this issue
- A script to run that is going to change the remote screen resolution (I still have the ability to run remote scripts, etc. simply not Observe/Control)
Ideas?
<Image Edited by Host>

I found a way to work around this issue. Not a fix but a work around.
This is little application some one wrote to toggle mirroring on and off.
Mirror Displays
If you put this application in the client computer's /Aplications folder
you can use ARD or SSH to run the app and switch modes.
The problem only occurs for me when a client is set to mirror dissimilar displays with different aspect ratios.
I am only seeing this in Lion 10.7.4 and 10.7.5
Hope it helps someone....

Issue with Period Control Table after copying Essbase adapter

Hi Experts,
I'm working on version 11.1.1.3 and have copied the adapters (Essbase, Pull + EPRi) in the work bench so I can add an additional target for the FDM application. However, I have an issue with the import process; it returns an error with the Time & Periods (I guess it's something to do with the Periods category).
I have reimported the Periods Control Table and updated the new application's Target Period & Year (whilst changing the system code in the Application settings to the newl adapter) and still receive the same error message.
Any direction or thoughts would be welcome.
Thanks
Mark

The time periods do not copy. You need to maintain them through the UI or upload them from excel. There is a KM article on this if you need additional detail.

Report Viewer icon rendering issue with web controls

Hi,
I have a sample application in ASP.NET 2.0 in which if I have a report viewer control in an aspx page and when I try to browse the page the report renders properly with all icons image also. But in the same application I am having a web user control that is having the report viewer control and I have added this control on another page. Now if I try to browse this page the report is rendered properly but the icon images are not displayed rather as 'X' is displayed indicating images are missing.
Thanks
Kajal

It sounds like the CrystalReportViewer control does not "agree" with the .NET control you are embedding it in. Can you be more specific with the exact steps to duplicate this issue? It would be helpful to know what controls you are using.
Viewing the source code will be helpful in your troubleshooting. You'll also want to review your IIS logs to see what error are popping up there. It could be that the gifs are being searched for in another location. You may need to make a copy of the crystalreportviewerxx directory in a new location.
Regards,
David

Weird issue with sound control?

I am not sure what is going on with my audio controls. I use MSI to control my audio (it's connected to the motherboard). The strange thing is, a crack appears on the "Reset EQ Setting" button.
See link: http://www.facebook.com/photo.php?pid=30673857&l=2041bbbec3&id=1458901123
That wasn't there when I first got the computer. Is there any way I could reinstall this? What could have caused the "crack" to appear? Has this happened to someone else?
I have also noticed that sometimes when I am playing music, the sound wavers, as if I am adjusting the volume slowly up and down by 1 degree. Is this an issue with my motherboard or WMP? Please answer both questions.

Quote
I cannot find the MS-XXXX anywhere!
Please read this thread:
https://forum-en.msi.com/index.php?topic=113146.0
If you can't find the model number, please look at the BIOS P.O.S.T. Status Screen and write down the full BIOS ID String as it appears in the following example picture:
Example (taken from the second picture): A7375NMS V2.2
The BIOS ID String will tell us a lot about the System. In the above example, the following information can be decoded from the ID String:
A...AMI BIOS Implementation
7375 ... Model Number (=MS-7375)
N... NVIDIA Chipset Board
MS... MS Standard BIOS Release
V2.2 ... BIOS Version 2.2

Issue on availabilty control

Similar Messages

Maybe you are looking for