Issue on borderless printing using android HP ePrint app with HP LaserJet Pro 200 color M251nw

Hi,
I am trying to print a pdf document which is of A4 size (11.7 x 8.3 inches without any borders) from android tablet using HP ePrint app along with the printer HP Laserjet Pro 200 color M251nw. When it is printed on A4 sheet, it adds the border on all the sides around 12mm-left, 11mm-right, 8mm-top, 9.5mm-botton margins.
On the printer the firmware datecode shows 20121026, Also the ePrint app which I am using is latest and upto date.
Please let me know how to print the borderless print in A4 sheet.
Regards,
Jaya

Hello revlib,
Welcome to the HP Support Forums!
Turning off the Wireless Direct on the LaserJet Pro 200 color M251nw should have disabled the SSID from broadcasting. Since disabling from the front display did not resolve, let us try from the Embedded Web Server (EWS).
To access the EWS you need to enter the I.P address for the M251nw into the address bar of your web browser. The I.P address can be collected by touching Setup ()> Reports> Network Summary.
Once in the EWS, click Network> Wireless Direct Setup> select Off and Apply.
Let me know if this has help
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Unable to Print Wireless anymore HP LaserJet Pro 200 Color M251nw

I've owned my extremely good HP LaserJet Pro 200 Color M251nw for around 10 months now but all of a sudden it has stopped printing wireless. If I print via a USB it works fine. I have downloaded new drivers and Firmware, done numerious restarts on both mac/pcs and printer but this still hasn't fixed the issue. I have run a number of Network Tests and all are coming back OK. When I try to configure the machine using the Online Printer Utility it cannt connect to my network (even though the self diagnostic test on pritner tells me everything is OK. I am running a mixture of both Mac and PC's and cant print from any of my devices. Bonjour print is enabled on the pritner but i cant see a bonjour IP address on my Mac.
Printer is still under warrenty but obviously feel that this is a last resort.

Hi @bluemango,
I see by your post that the printer stopped working over the wireless network. I can help you with this.
Restore the network defaults on the printer.
Go to setup, network setup, restore defaults.
Power cycle the router and computers.
Then run the wireless setup on the printer.
Go to setup, network setup, wireless menu, wireless setup wizard.
Print off a configuration page, to make sure the printer has a valid IP address.
Printing a Configuration Report. Print the report from the printer's control panel.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer or Safari)
If it loads the printer's network page then the printer is on the network.
On the Mac, try and add the printer through Printers and Scanners or run the installation.
On the Windows computer, run the add printer wizard through the printers window or run the installation.
What operating system are you using?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problems with wireless connection on HP LaserJet Pro 200 color M251nw printer

Hi! I have a problem with my printer internet wireless connection. I do everything what is in manual for installation, but my printer won't connect to the internet. I have LaserJet Pro 200 color M251nw.

Hi
With the notes you have posted i see that you are unable to get on to printer apps, web services and eprint, please follow the steps given in the link given below and check the wireless connection and it should resolve the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03325484&tmp_task=solveCategory&cc=us&dlc=en&ju...
Regards
Aneesh
I Represent HP
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!...

LaserJet Pro 200 color M251nw does not print from internet

I have a LaserJet Pro 200 color M251nw, set up for wireless printing. It finally works when printing from Microsoft Word 2010, but refuses to do so from the internet.
Can anyone help me?
Thanks!
SALLYANNC

Hi @SALLYANNC,
I see by your post that you are unable to print from the internet. I can help you with this.
Run the Windows updates and update your browser.
Try printing from another browser to see if you have the same results.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What internet browser are you using?
What operating system are you using?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LASERJET PRO 200 COLOR M251nw - new printer acts like there is low ink

This is a brand new printer, has never printed a page correctly. The ink is barely visible like it is out of color, but it shows all is fine. Is there something to clean or an adjustment to fix this?

Hello revlib,
Welcome to the HP Support Forums!
Turning off the Wireless Direct on the LaserJet Pro 200 color M251nw should have disabled the SSID from broadcasting. Since disabling from the front display did not resolve, let us try from the Embedded Web Server (EWS).
To access the EWS you need to enter the I.P address for the M251nw into the address bar of your web browser. The I.P address can be collected by touching Setup ()> Reports> Network Summary.
Once in the EWS, click Network> Wireless Direct Setup> select Off and Apply.
Let me know if this has help
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Which inf file to use for HP LaserJet Pro 200 color m251nw, when updating the driver?

My printer is LaserJet Pro 200 color Printer M251nw. I visited the support page and found there is a newer driver.
Driver (61.117.01.15301)
Currently my driver version is 61.117.1.11493. I want to upgrade the driver.
After downloading and unzipping the files into the folder, I found there are 3 inf files in the folder:
hpcm251u.inf
hpcm251c.inf
hpbuio70l.inf
So which one should I install? I am disappointed at the lack of information and inconvenience in upgrading the driver.
June

Hi CJKim,
Welcome to the HP Forums.
I see that you are trying to update the driver and are not sure which .inf to choose.
I will be happy to help you.
Since it is running through the add printer wizard you can select any one of the .inf files you listed
to update the drivers.
Thank you for posting on the HP Forums.
Have a great day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet Pro 200 color M251nw does not print font larger than 48 using Office WORD 2013

If a create a new Word document and I type letters of 72 font, the letters do not print. If the font size is reduced to 48 then it prints. The brand new printer is connected to my laptop via USB. I'm using an HP Laptop Pro 7420s, 32 bit with MS Office H&B 2013. Any ideas as to what should I check? Thank you.
This question was solved.
View Solution.

Hi,
Install the latest firmware for the printer, that should address this type of issues.
For a USB connection use the following tool:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-108129-8&cc=us&dlc=en&lc=en...
For network connection follow these steps:
http://support.hp.com/us-en/product/HP-LaserJet-Pro-200-color-Printer-M251nw/5097632/model/5097639/d...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp laserjet pro 200 color m251nw Printer tray stuck

I went to refill the tray. When I tried putting it back in it was hard to get back in. I moved the printer to make sure nothing was jaming it. They tray went back in and now is stuck. It's it won't release. Totally stuck. Need help! Thanks!

Hi @Brendarv ,
I understand that you are having issues with the paper tray being stuck. I would be happy to help you.
Make sure the printer is on a flat surface. Open the Jam access door to see if that will help to see what the tray might be caught on. You might have to gently wiggle the tray to get it on the grooves to remove it.
Here is a picture of the printer. Number 5 is the Jam access door.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color M251nw Printing Out of Alignment

Images and color text print out of alignment.
The issue started the first day we had the print. It has taken me a while to get into diagnosing it but I have tried the following:
I have tried replacing the toner cartridges with new ones (expensive). The problem occured even with the original starter cartridges.
I have tried a full printer reset.
I have tried leaving the printer unplugged from power for 24 hours.
I have tried several alignment features within the printer menu.
Printing black alone is fine. All other colors do not line up with each other or with the black. Creates a 3D-ish kind of effect.
The printers quality report shows all colors areprinting fine but not aligned to one another.
I have included scans of a part of a rainbow print that illustrates the misalignment as well as the quality report page.
This question was solved.
View Solution.

Thanks for letting me know James_LAG.
At this point it does look like a hardware issue with the printer. Please call our technical support and inquire about a replacement printer, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro 200 color mfp m276 Printing issues

I have had this printer for about a year now. Now it has started printing solid black lines across the page I am printing, whether it be from my computer or a fax. I can run the cleaning process from the printer and its fine for a few hours and then back to the solid black lines. It gets so bad there is more ink on the paper than white when it does this. Have tried everything I can think of to cure this to no avail. I am running hp cartridges and just plain white paper. Any ideas as to how to fix this. These lines are thick lines, just not _____ but are about 1 " wide each.
I really need help with this really soon or I will have to replace it with another brand. I use this in my office and can't have important faxes coming across with all these lines so I can't read it. I posted this Saturday and still waiting for someone to respond.

Hi @RandallRaley ,
I understand that when printing, you are getting solid black lines across the paper and now on the back of the paper. You are using HP cartridges, plain paper and have ran the cleanings with the same result. I can help you today.
Try another type of 20lb -24lb plain paper to see if you have the same results.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP LaserJet Pro 200 color MFP M276nw Drivers.
Select your operating system, click next, click the link for firmware.
Try printing again.
If the issue persists, follow the steps for aligning and cleaning the toners, printing a Print Quality page, inspecting the toner for damage, checking the paper and driver settings to see if this will resolve the issue.
Troubleshooting Print Quality Issues.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Are you getting the black lines on the Hardware Self Tests also?
Where is the printer located? (on a desk, on a enclosed shelf in desk)
What kind of paper are you using?
What is the weight of the paper?
Was there any black on the toner?
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to Print Envelopes - HP LaserJet Pro 200 color MFP

I can't work out how to print envelopes on my HP LaserJet Pro 200 color MFP.
I put the envelope upright (flap down) in the adjustable tray at the very top of the machine (as I have done in almost every printer I've used) and it prints the address on a sheet of paper!

Hi goodgrandma ,
I see by your post that you would also like to know how to print envelopes.
I will be happy to help you.
Both the Laserjet m251 and M276 have a main tray only.
Above the tray is the jam access door to remove paper jams.
To print on the envelopes, you would need to remove all the paper from the main tray and load the envelopes in the main (bottom) tray, to print to envelopes with these two units.
If you are using Word Application, click on Tools, select Letters and Mailing/Envelopes and labels, the envelope box will open, in the envelope tab enter your address, click on Options, click the Printing Options tab, you will need to change the Feed from to Auto, it is likely set to Manual.
What is the full name and product
number of your printer? How Do I Find My Model Number or Product Number?
Hope this helps.
Thank you for posting on the HP Forums.
Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color MFP M276 - not able to print black when any color is empty

Hi,
We have 2x HP LaserJet Pro 200 color MFP M276n in our office, both have firmware date code 20121026.
The problem is that when ever one of the colored toner cartridges gets empty it fails to print even black & white documents and freezes in the replace cartridge screen.
In system supplies settings it is configured to print only black when colored supplies are below very low threshold limit.
Since the printer is freezing in the warning screen and only powering it off and on helps to bring it back alive, it seems that this is a software or firmware issue. I didnt find any firmware updates for this model though.
It doesnt make any sense that it is not possible to use the printer at all when only one of colored cartridges is empty. Any thoughts on how to solve this issue are welcome.

Hi,
The firmware that you have mentioned is old and the latest version available is
Version
20131216
it is always advisable to update the printer to the latest firmware. Please update the firmware form the given link
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-4&cc=us&dlc=en&lc=en...
Hope this helps....
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Hp laserjet pro 200 color mfp m276nw no print preview

Hello Folks,
I have windows 7 64 bit HP laserjet pro 200 color mfp m276nw and do not see a print preview option. Is there a way to get this? In Linux I use print to ps file and ghostscript to view. Our oldink jet had a print preview option. I did see a message for another printer that there is no solution. Any help would be appreciated.
Thanks
timkat

Hi @Timkat ,
I understand that you would like to know if the printer has a print preview option. I can help you.
You would have to use the print preview, from the application that you are printing from, under File, Print Preview.
Most applications have this feature.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet pro 200 color MFP M276nw Network Setup Issues

Successfully set up the printer. Elected to use Wifi option. Wireless computers are able to print to it no problem. Went to go do my first scan, and it tells me to setup the print to network drive. So i go to do this, and the HP software on the host computer (with USB connection) tells me that it can not setup unless is printer is connected to a network.
Obviouslly it is connected to a network....
So turned off Wifi. Turned off printer. Wired it to the router. Turned on. And still get the error message. For that matter, can not find in the Printer menu (on printer) where i can "setup" a wired connection.
I am a computer nerd, but for some reason i gots the dumb today. Some pointers would be appreciated - regarding the printer that is.
This question was solved.
View Solution.

Hi @joe_smoe ,
I see that you are having issues Scanning from the printer's control panel, you are getting a message to setup the printer to a network drive. I would be happy to help you.
I have provided some steps for you to try. I would suggest though, since the printer is already on the wireless network with the other computers, to just create a new port for wireless on the computer that was setup by a USB connection, instead of setting up the Ethernet connection. A Ethernet connection will turn off the Wireless on the printer.
Since you are now connecting the printer to the router by a Ethernet connection, you can print a Configuration Page to get the printer's IPv4 address. HP LaserJet Pro 200 Color MFP M276n and MFP M276nw - Printing a Configuration Report.
Then you can create a new port for the Ethernet connection.
Then go into Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
Type in the proper IPv4 address for the printer.
Make sure the printer is online.
Test the printer.
Here is a document for how to Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet pro 200 color mfp m276nw Scan to Email issue

My laserjet pro 200 color mfp m276nw claims email is not set-up. I have entered in the e-mail addresses to send the scans to, but it still claims it is not setup. How do I setup this feature? I already have the "Send an Email" feature working where it sends the scan "from" my e-mail, but I want to use the Address Book feature and just send to a specific e-mail.

HI @Username57 ,
I see by your post that you what to setup the scan to email on the printer. I would like to help you out with this issue today.
I have provided a document for How to Scan: From the Control Panel. Select Scan to an email.
If you are still having issues then go into the printer's Embedded Web Server by typing in the printer's IP address in your web browser and setup a Static IP and set the DNS address.
Click the Network tab, then click on IP4 config on the left side.
Click on Network Address (IP)
Select Manual.
Type in the printer's information and IP address.
Set the DNS Address Configuration as Manual. Under Network Information, it looks like you can change the settings there.
Set the preferred address as 8.8.8.8
Set the Alternate address as 8.8.4.4 and confirm the changes.
Try setting it up again.
If you need further assistance, just let me know.
Happy New Years!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Issue on borderless printing using android HP ePrint app with HP LaserJet Pro 200 color M251nw

Similar Messages

Maybe you are looking for