Issue on CO-PA flow

Hello Experts and gurus
In Production and also in Pre-production we had an issue on CO-PA flow. We have lost some data. I''d like to know if there is way to recover this data. We have identified the date when the data are missing. Data missing on Nov 15 due to a repeat last delta.
It is on YIP_F_1_CO_PA_1000_03(infopackage) flow

You can try to extract it with selecting in infopackage the document missing.
Depend of selection defining in datasource.
Mario

Similar Messages

Mail sent issue in CLM work flow

Hi Expert,
we are facing an issue CLM workflow mails.
Once all approvers done in contract document the status mail need to be triggered to the owner of the Document.
But intead of that it is sending to other person who is nowhere related to the document .
Please guide me on this .
Thanks,
Pavan.

Hi Expert,
we are facing an issue CLM workflow mails.
Once all approvers done in contract document the status mail need to be triggered to the owner of the Document.
But intead of that it is sending to other person who is nowhere related to the document .
Please guide me on this .
Thanks,
Pavan.

Import Issue ADC is not flowing & Base amount is wrong

Hi,
I am getting problem in Import procedure.
We created Import Purchase order as normal means Main Vendor in Foreign Currency and Customs Vendor in Indian Currency. We assigned same in PO.
After creating PO we did Customs MIRO in Indian Currency.
I am not getting the Value, which I had entered, in MIRO.
1. My base is coming wrong (So the BED,ECS,SHECS is coming Wrong)
2. ADC isn't flowing.
Import pricing I have takne JADC & in Excise default I have maintained the condition also.
In MIGO we entered Customs invoice Number. We are mentioned Excise default settings. We are using TAXINN.In my Import Pricing Procedure I have assigned Account key and accruals.
Biswajit

ADC will be captured in (RG23A) AED field of excise invoicce.
So we need to maintain account determingation for RG23A AED at sutransaction level-IP.
If you do this, the value will flow,
regards
Prasad

Requistion Approval Issue for iProcurement Approval Flow

Hi,
The instance details upon which i'm currently working are as follows,
R12 Instance
RDBMS : 11.1.0.7.0
Oracle Applications : 12.1.1
I'm currently working towards resolving an issue where in all the requisitions submitted by a particular user through iProcurement are resulting into the status Incomplete.
After submission by the user the requisition approval workflow is kicked off and the approval request notifications are being sent out.
The approvers have approved the notification as well.
Inspite of all the approvals being gathered for this requisition, the workflow completes but the requisition status is set to Incomplete.
Any pointers as to why this might be the case. Also could you suggest where i need to be looking to resolve this issue.
The workflow i repeat always completes normally.
Any suggestions or advise is much appreciated!!
Regards,
Vishal

Any updates or help on this issue. Right now i'm out of ideas and places to look for to find the root cause that is creating this issue.
Any help or guidance is much appreciated!!
Regards,
Vishal

E-Recruitment - Issue in Requisition Approval, flow to Recruiter

Hi All,
Im using standard WF 45600028 for requisition approval.
The request when created by Manager is going for approval to his supervisor and Supervisor in turn is able to approve the request, but the its not reaching recruiter.
When i verified Requisition monitor of the MSS view, then i see the request in "Draft" mode instead of "Released".
I feel this is the reason why recruiter is unable to see the requisition coming from Workflow.
Can someone help me change the status?
Thank you.
Pranitha

Hey Thanks Siddharth,
Anyways, my problem is resolved. What i mean on Recruiter's involvement is recieving the approved form so that he can take it up further for posting.
In My case Recruiter's dash board or UWL , nowhere is the data populated. So i was of the opinion that the approved requests are by default saving in draft mode and hence not reaching recruiter.
Finally, i reallized that there is a small refresh link, at the bottom of the dash board. I need to click on the each of the links in the dashboard and "Refresh" from the link at the bottom, then only my approved requests are showing up, that too under "My Application Groups, My Open Requisiotns and All requisitions".
Silly me !! I have wasted so much of my time debugging Workflow and changing all the possible config setting.
But i really wonder why cant the data base be updated when we refresh with F5 instead click on each of the links in dashboard inorder to see what has he got in his box. This seems little weird to me.
Regards,
Pranitha

Issue with refresh of task flow in dynamic region

Hi All,
I am using Jdeveloper version 11.1.1.6. In my fusion application I am facing an issue with the task flow refresh in the dynamic region. In my application, I have one task flow in which the side navigation command links are there and on the right side it has a dynamic region which is used to display the respective task flows on click of navigation links. Now two of the links actually call the same task flow in dynamic region but for different purpose. One for creating a record and another one for modifying the record. The default activity of that task flow has a page fragment that has couple of fields. One a drop down and another one a text field for searching the accounts against which the record is to be created or modified. On click of the navigation link, I set the task flow id to be displayed and refresh the dynamic region. Now the issue is with those two links which shows the same task flow. Let's say I searched for a record by putting some value in input text and then went on to modify flow using the modify navigation link. Then the value that I entered in search input text in the create flow stays and does not go away. I found out the cause for the issue and this is happening because of the immediate = true on the navigation command links. Now I cannot remove that because of the obvious reason that then it will start throwing exceptions for the mandatory fields when I am in middle of any flow. Is there any way to achieve it.
Please help as this is quite urgent. I can also upload the sample application if anyone needs it.
Regards
Ajay

try to put RefreshCondition in the pageDef file for that particular task Flow and try to make that condition to true only when you switch between edit or add. While switching, make sure that the mapped bean properties should also point to respective values i.e. either empty for new or holds some value for edit.
So, when ever the above condition returns true, task flow gets refreshes and it will holds only the current values not the old values.
i hope this will resolve your issue.

Issue with Data flow between Unicode and Non Unicode systems

Hello,
I have scenario as below,
We have a Unicode ECC 6.0 and a UTF 7 Legacy system.
A message flow between Legacy system to ECC 6.0 system and the data is of 700 KB size.
Will there be any issue in this as one is Unicode and other is non Unicode?
Kindly let me know.
Thanks & Regards
Vivek

Hi,
To add to Mike's post...
You indicate that your legacy system is non-Unicode and the ERP system is Unicode. You also said that the data flow is only from the legacy system to the ERP system. In this case, you should have no data issues, since the Unicode system is the receiving system. There are data issues when the data flow is in the other direction: from a Unicode system to a non-Unicode system. Here, the non-Unicode system can only process characters that exist on its codepage and care must be taken from sending systems to ensure that they only send characters that are on the receiving system's codepage (as Mike says above).
Best Regards,
Matt

Confirmation of service in the document flow, where it comes from?

Dear all,
I found a confirmation of service after I picking and posting goods issue, from the document flow.
I just wondering, where it comes from? Or, how can I configure it on or off for display?
(This is a standard ERP system, should not involve in the CRM module)
Thanks,
Edited by: Peng Li on Apr 29, 2008 10:04 AM
Edited by: Peng Li on Apr 29, 2008 10:38 AM

Hi Peng,
This usually happens for inbound deliveries usually happens when a movement type is not found for the relevant item. Please check in the delivery item if a movement type is maintained.
Another possibility is that the material is a non-stock (service) material type for which goods movement are not relevant. Check the material type from the material master.
Regards
Nikhilesh

TopLink issue on Bpel 10.1.3.3

We are having an issue with the bpel flow on Bpel 10.1.3.3 where when it is inserting into the database, not all of the fields are saving to the database.Several of the fields are being stored as null in the database although there are values
that should be saved. I deployed the flow on both Bpel 10.1.2 and Bpel 10.1.3.3 which have same database connection. Bpel 10.1.2 has no problem. My flow is created by Bpel 10.1.2 designer. I also use JDveloper 10.1.3.3 to migrate the flow and then deploy it on Bpel 10.1.3.3. However, I am still facing an issue on Bpel 10.1.3.3.
The data being inserted to database which I saw it from Bpel console.
<description>CAR-47511-000073*EBS.01088</description>
<exchangeRateType>ALEXTEST</exchangeRateType>
<invoiceAmount>4086.82</invoiceAmount>
<invoiceCurrencyCode>USD</invoiceCurrencyCode>
<invoiceDate>2006-03-20T08:00:00</invoiceDate>
<invoiceId/>
<invoiceNum>ALEX-000002|EBS.000002</invoiceNum>
<orgId>204</orgId>
<invoiceTypeLookupCode>STANDARD</invoiceTypeLookupCode>
<source>TRANSPORTATION MANAGEMENT</source>
<vendorId>3932</vendorId>
<vendorSiteId>4646</vendorSiteId>
However, only invoice id, source, vendor id, vendor site id are inserted into dabase. All others are nulls.
Any idea? thanks !!

To complement information:
1/ Zoom in doesn't have this issue:
both Ctrl + Numpad + and Ctrl + = are working
On AZERTY keyboard = and + are on same key.
2/ When using Ctrl + Numpad - , I observe same behaviour as Ctrl + 6 (opens a box to comment)...
Can you at least fix Ctrl + Numpad - for zoom out?
(this won't be unversal but will at leas save 90% of the issues)

Addition of standard programs in Schedule Manager Flow definitions

Hello Experts,
I want configure schedule manager for month end closing.
In that I am creating flow definition. In the flow definition I want to insert one program RKAZCO43COWL which is standard program & which is also entered in the table SCMAPROGRAMS in the reaspective appplication.
But still I am unable to find it in the input help for creating program in the flow definition.
Please help. Is there any other way where in I need to register the standard program ? How can I find it in the input help ?
Thanks in advance.
Abhishek

Dear All,
I am still facing below issue.
While creating flow definitions , when I try to attach program I face below issue.
e.g. I want to attach program RK_PEP_WL_SEL_SAL which is in the application CO-PC-OBJ-SALESORD but when I created flow definition I gave application as Controlling , so how to add program in the flow definition which has different application ?
If I try to attach application CO-PC-OBJ-SALESORD in flow definition itself then I cannot add programs in Controlling application .
Kindly help how to add different programs from different application.
Thanks in advance.
Abhishek.

Camera raw 6.5 adjustment brush issue

Hi all I've asked this question over at adobe
Ok since I've installed the latest lion update 10.7.2 on my mac bookpro 2.3 intel core i5 memory 8 gig 1333 MHz DDR3 the exposure ajustment brush in Camera raw 6.5 is not working properly it dosen't always give me the round brush icon and it places the pin randomly so it's next to useless.I cannot find an answer anywhere am I the only person on this planet with this issue?I've even uninstalled and reinstalled my photoshop cs5 to no avail any help would be greatly appreciated
regards Daryl
The thread is here http://forums.adobe.com/message/3982929#3982929
My graffix card is the one mentioned in the discussion a Intel HD Graphics 3000
Is anyone at apple looking into this or has anybody got a solution as this is causing serious issues with my work flow
king regards Daryl

Ok seem like this is a known bug from the last 2 months.....when is apple going to retify this I've been using mac gear for years to avoid all these kind of dramas
here's a link to a topic covering the issue
http://feedback.photoshop.com/photoshop_family/topics/brushes_not_working_on_201 1_macbook_air

Cover flow slow to scroll in Vista with Nvidia GeForce 8400M

I recently purchased a new laptop with vista service pack 1. One issue is the cover flow motion is really slow to scroll compared to my last computer using xp. Does anyone else have this problem or know of a fix?

I have had the same problem with my new Dell XPS notebook since I bought it in mid Feb. I have googled the problem and a lot of users are also having this problem. Cover flow mode is painfully slow and unuseable. If you find a fix, please post.

FV11 key combination issue - Materials - Services

Hi MM experts,
I am having problem while making the PO - Services.
We are separate POs for material & services.
FV11 key combination maintained for Materials : Plant/Vendor/Material
FV11 key combination maintained for services : Plant/Vendor/Materail Group
While making PO- Material, If select V1- Taxes conditions are coming - which is required & right
                                           If select V0 - Taxes conditions are not flowing
While making PO- Services, If select V1- Taxes conditions are coming & taxes are flowing in PO - which is required & right
                                           if select VO - then also same conditions are coming & taxes are flowing in PO
here my requirement is why services PO the V0 - taxes & tax conditions are flowing as maintained in FV11 key combination
pl help in arresting the Services-PO - Taxes & Tax conditions should not flow when we select V0.
thanks & regards
Srihari

hi
I think my query is not clear, i repeat the same.
1. I am maitaining Fv11 for Vat i.,e JVRD conditions, this will be triggered when i use V1 in while making PO- Materials, all the tax values ie., Vat amount is flowing in PO,
If I select V0, then the tax conditions are not flowing and values are nil. PO- Materials, all the tax values Nil, and the po value is without any Vat amount.
2. Similarly, I am maintaining FV11 for service tax ie., JSRT -10%, JEC1-2% & JSEC-1%, this will be triggered when I use S1 in while making PO-services, all the tax values ie., service, ec, sec cess amounts are flowing in PO.
If is select V0, then also the tax conditions are flowing in PO- services, all the tax values ie., service tax, ec, sec cess
I want the PO-Service, without any taxes, when I select standard Tax condition V0.
Pl suggest, do we have separate tax conditions for materials & services, meaning
V1 - taxes to flow in PO- Materials
V0 - Taxes not to flow in PO- Materials
S1 - Services taxes to flow in PO- Services
S0 - Services not to flow in PO- Services   -
> this is to be created new??????????
pl advise, how i over come the issue of services taxes flow in PO-Services.
pl help
thanks & regards
Srihari

Issue in passing process order related to order type ZGP9.

Hi Experts,
There has been a development done in CIF user exit to block process orders having order type ZGPD & ZGP7. But we are also facing issue for process order flow for order type ZGP9.
1. To avoid double counting of Depack orders (order type ZGPD) in actual production key figure of SCIPIO, stop sending actual production for order types ZGPD from P1 to SCIPIO.
2. To block Rework (ZGP7) and De-pack (ZGPD) Process order in CIF from SCIPIO end, Add one extra field in Custom Structure CI_ORDCUS which transfers Process Orders to APO. This field will capture "Order Type" for Process Orders and send it to APO.
could any body suggest me why the issue is coming for process order ZGP9.

Hi Venkat,
1) Check whether the user exit is implemented properly
2) Check whether the process order showing ZFGP9 is
created recently?
3) Archive that process order and try creating a manual
process order and check. If still error persists, use an
abapper to check which table is calling that order type
and accordingly you can proceed.
Regards
R. Senthil Mareeswaran.

Authorization flow Business Transactions

Hello partners,
I have a issue with the authorization flow concept.
My need is :
A.- the transaction type z01 is only for the user that belong to unit org A, object CRM_ORD_OE
B.- the transaction type z02 is only for the for own transactions of the employee, object CRM_ORD_OP
C.- the transaction type z03 is access for all users and not depend of unit org or his transaction.
So I have doubt with the combination of all of them, how can indicate to the system that for A scenary, I need the restrict only if the transaction type is Z01? and for the scenary B only for Z02, and the scneary C without restrictions?
this is the help sap documentation:
Process Flow of the Authorization Check in Business Transactions - Authorization Check in Business Transactions - SAP Li…
Regards
Roberto.

Thanks Christophe,
I analize the FM CRM_ORDER_CHECK_AUTHORITY_ACE,
but when I try to search activities in the SALESPRO, component view BT126S_APPT/ApptSQ, the break not work,
in others view like search service request, work ok the FM,
but for search activities not work,
I'm not sure if I need a specific Switch for that.
Do you know?
Regards

Issue on CO-PA flow

Similar Messages

Maybe you are looking for